Patchworkβ [3/6] acpi: thermal: display forced passive trip points in proc

login
register
about
Submitter Frans Pop
Date 2009-10-26 07:39:01
Message ID <1256542744-26569-4-git-send-email-elendil@planet.nl>
Download mbox | patch
Permalink /patch/55831/
State New
Headers show

Comments

Frans Pop - 2009-10-26 07:39:01
Users can force a passive trip point for a thermal zone that does not
have _PSV defined in ACPI by setting the passive attribute in sysfs.
It's useful to display such trip points in /proc/acpi/thermal_zone.

.../TZ1/cooling_mode:<setting not supported>
.../TZ1/polling_frequency:polling frequency:       10 seconds
.../TZ1/state:state:                   ok
.../TZ1/temperature:temperature:             53 C
.../TZ1/trip_points:critical (S5):           110 C
.../TZ1/trip_points:passive (forced):        95 C

And if not set (passive is 0):
.../TZ1/trip_points:passive (forced):<not set>

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
---
 drivers/acpi/thermal.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)
Len Brown - 2009-11-05 23:12:40
applied for 2.6.33

thanks,
Len Brown, Intel Open Source Technology Center

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 65f6781..9073ada 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -1052,6 +1052,13 @@  static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset)
 				   acpi_device_bid(device));
 		}
 		seq_puts(seq, "\n");
+	} else {
+		seq_printf(seq, "passive (forced):");
+		if (tz->thermal_zone->forced_passive)
+			seq_printf(seq, "        %i C\n",
+				   tz->thermal_zone->forced_passive / 1000);
+		else
+			seq_printf(seq, "<not set>\n");
 	}
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {