new file mode 100644
@@ -0,0 +1,137 @@
+Lenovo ThinkPad SL Series Laptop Extras driver
+http://github.com/tetromino/lenovo-sl-laptop
+Version 0.02
+16 February 2009
+
+Copyright (C) 2008-2009 Alexandre Rostovtsev <tetromino@gmail.com>
+
+lenovo-sl-laptop is a driver for controlling various parts of the Lenovo
+ThinkPad SL series (SL300/400/500) laptops. The SL series is not supported
+by the standard thinkpad_acpi driver.
+
+Reporting bugs
+--------------
+
+You can report bugs to me by email, or use the Linux ThinkPad mailing list:
+http://mailman.linux-thinkpad.org/mailman/listinfo/linux-thinkpad
+You will need to subscribe to the mailing list to post.
+
+Disclaimer
+---------
+
+This driver was written with no help from Lenovo engineers, and is based on
+my experiments with my SL300. It's possible that it could break your hardware
+- of course, that is quite unlikely, but still, be aware of the possibility.
+
+Supported hardware
+------------------
+
+I have reports of the driver working on a number of SL300, 400, and 500
+laptops with Intel video. I do not know how well it works with Nvidia
+video cards.
+
+There are rumors that with some modification, the driver can be used on
+some IdeaPads. I know that it certainly does *not* work, and probably will
+never work, on the IdeaPad S10e.
+
+If the driver does not work on your ThinkPad SL, please send me a copy of
+your DSDT. In other words,
+cat /proc/acpi/dsdt > dsdt
+and send me the resulting dsdt file.
+
+Keymap
+-----
+
+Lenovo Care : KEY_VENDOR (360)
+Volume up : KEY_VOLUMEUP (115)
+Volume down : KEY_VOLUMEDOWN (114)
+Volume mute : KEY_MUTE (113)
+Fn F2 (screensaver): KEY_COFFEE (152)
+Fn F2 (battery): KEY_BATTERY (236)
+Fn F4 (sleep): no input event; dispatches an ACPI event
+Fn F5 (radio): KEY_WLAN (238)
+Fn F7 (switch screen): no input event; dispatches an ACPI event
+Fn F8 (Ultranav): KEY_PROG1 (148)
+Fn F9 (eject): KEY_EJECTCD (161)
+Fn F12 (hibernate): KEY_SUSPEND (205)
+Fn Space (zoom): KEY_ZOOM (372)
+Fn Home (brightness up): by default, only dispatches an ACPI event;
+ will dispatch an input event if
+ control_backlight parameter is on.
+Fn End (brightness down): see above.
+
+
+Sysfs interface
+---------------
+
+You may find the following sysfs files useful. NOTE: depending on your
+hardware and module parameters, some of these will not be available.
+
+/sys/class/leds/lensl::lenovocare/
+ The Lenovo Care LED. brightness can be 0 (off) or 255 (on). To make the LED
+ blink, make sure you have LED timer trigger support and
+ echo "timer" > /sys/class/leds/lensl::lenovocare/triggers
+ Afterwards, you will be able to adjust the blink frequency using delay_off
+ and delay_on (in milliseconds).
+
+/sys/devices/platform/lenovo-sl-laptop/rfkill/rfkill*/
+ The bluetooth rfkill. state is the switch state (0 for bluetooth off,
+ 1 for bluetooth on).
+ Note that in case future versions of the driver add other rfkill switches,
+ userspace programs should check that the rfkill name is lensl_bluetooth_sw
+
+/sys/devices/platform/lenovo-sl-laptop/hwmon/hwmon*/
+ Fan control. fan1_input is the fan speed, in RPM. If pwm1_enable is zero,
+ fan is in automatic mode; setting pwm1_enable to 1 lets you control fan
+ speed manually. Manual control is via pwm1 file; values are in the range
+ 0-255, where 0 is fan off, 255 is max (corresponds to ~ 4600 RPM), and
+ default is 126 (corresponds to ~ 2700 RPM).
+
+/sys/class/backlight/thinkpad_screen/
+ The backlight brightness interface. Only available if the control_backlight
+ parameter is on. This interface will very likely disappear in a future
+ driver version, after the ACPI video driver properly supports the SL series.
+ I am using the same backlight device name as the thinkpad_acpi driver in
+ order to ensure support on existing versions of the xorg intel video driver.
+
+Module parameters
+-----------------
+
+debug:
+ Controls the verbosity of messages printed to the kernel log. Values
+ range from 0 (print nothing) to 7 (print everything).
+ Default is 6.
+
+bluetooth_auto_enable:
+ If this parameter is set to 1 and your laptop supports bluetooth, then
+ bluetooth will be activated immediately when you load this driver. If
+ the parameter is set to 0, bluetooth will not be automatically activated,
+ and you will need to enable it manually:
+ cat 1 > /sys/devices/platform/lenovo-sl-laptop/rfkill/rfkill*/state
+ Default is 1.
+
+control_backlight:
+ If this parameter is set to 1, this driver will intercept brightness keys
+ (Fn+Home and Fn+End) and control the backlight brightness. This feature is
+ useful because the default ACPI video driver currently has poor support
+ for the Lenovo SL series. If you enable this feature, you should add
+ acpi_backlight=vendor
+ to the kernel boot parameters. Otherwise, lenovo-sl-laptop and the ACPI
+ video driver will both try to change screen brightness simultaneously,
+ causing interesting effects.
+ It's likely that this option will disappear in the next driver version
+ (I will remove it once the SL series are well supported by the ACPI video
+ driver).
+ Default is 0.
+
+debug_ec:
+ For debugging purposes, enables access to the ACPI embedded controller via
+ /proc/acpi/lenovo-sl-laptop/ec0
+ Reading from this file will dump the contents of all EC registers. Doing
+ so could theoretically crash your computer. Writing to this file will
+ write data to the EC registers.
+ **WARNING** : WRITING THE WRONG VALUES TO THE EMBEDDED CONTROLLER
+ CAN *DESTROY* YOUR VALUABLE HARDWARE! Do not even think of doing it unless
+ you are quite certain about your actions.
+ Default is, of course, 0.
+
@@ -288,6 +288,24 @@ config THINKPAD_ACPI_HOTKEY_POLL
If you are not sure, say Y here. The driver enables polling only if
it is strictly necessary to do so.
+config LENOVO_SL_LAPTOP
+ tristate "Lenovo ThinkPad SL Series Laptop Extras (EXPERIMENTAL)"
+ depends on ACPI
+ depends on EXPERIMENTAL
+ select BACKLIGHT_CLASS_DEVICE
+ select HWMON
+ select INPUT
+ select NEW_LEDS
+ select LEDS_CLASS
+ select RFKILL
+ ---help---
+ This is a driver for the Lenovo ThinkPad SL series laptops
+ (SL300/400/500), which are not supported by the thinkpad_acpi
+ driver. This driver adds support for hotkeys, bluetooth control,
+ the Lenovo Care LED, fan speed, and (as an experimental feature)
+ for screen backlight brightness control. For more information,
+ see <file:Documentation/laptops/lenovo-sl-laptop.txt>
+
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
@@ -18,3 +18,4 @@ obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
obj-$(CONFIG_ACPI_WMI) += wmi.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
+obj-$(CONFIG_LENOVO_SL_LAPTOP) += lenovo-sl-laptop.o
new file mode 100644
@@ -0,0 +1,1310 @@
+/*
+ * lenovo-sl-laptop.c - Lenovo ThinkPad SL Series Extras Driver
+ *
+ *
+ * Copyright (C) 2008-2009 Alexandre Rostovtsev <tetromino@gmail.com>
+ *
+ * Largely based on thinkpad_acpi.c, eeepc-laptop.c, and video.c which
+ * are copyright their respective authors.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#define LENSL_LAPTOP_VERSION "0.02"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
+#include <linux/rfkill.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#define LENSL_MODULE_DESC "Lenovo ThinkPad SL Series Extras driver"
+#define LENSL_MODULE_NAME "lenovo-sl-laptop"
+
+MODULE_AUTHOR("Alexandre Rostovtsev");
+MODULE_DESCRIPTION(LENSL_MODULE_DESC);
+MODULE_LICENSE("GPL");
+
+/* #define instead of enum needed for macro */
+#define LENSL_EMERG 0
+#define LENSL_ALERT 1
+#define LENSL_CRIT 2
+#define LENSL_ERR 3
+#define LENSL_WARNING 4
+#define LENSL_NOTICE 5
+#define LENSL_INFO 6
+#define LENSL_DEBUG 7
+
+#define vdbg_printk_(a_dbg_level, format, arg...) \
+ do { if (dbg_level >= a_dbg_level) \
+ printk("<" #a_dbg_level ">" LENSL_MODULE_NAME ": " \
+ format, ## arg); \
+ } while (0)
+#define vdbg_printk(a_dbg_level, format, arg...) \
+ vdbg_printk_(a_dbg_level, format, ## arg)
+
+#define LENSL_HKEY_FILE LENSL_MODULE_NAME
+#define LENSL_DRVR_NAME LENSL_MODULE_NAME
+
+/* FIXME : we use "thinkpad_screen" for now to ensure compatibility with
+ the xf86-video-intel driver (it checks the name against a fixed list
+ of strings, see i830_lvds.c) but this is obviously suboptimal since
+ this string is usually used by thinkpad_acpi.c */
+#define LENSL_BACKLIGHT_NAME "thinkpad_screen"
+
+#define LENSL_HKEY_POLL_KTHREAD_NAME "klensl_hkeyd"
+#define LENSL_WORKQUEUE_NAME "klensl_wq"
+
+#define LENSL_EC0 "\\_SB.PCI0.SBRG.EC0"
+#define LENSL_HKEY LENSL_EC0 ".HKEY"
+#define LENSL_LCDD "\\_SB.PCI0.VGA.LCDD"
+
+#define LENSL_MAX_ACPI_ARGS 3
+
+/* parameters */
+
+static unsigned int dbg_level = LENSL_INFO;
+static int debug_ec;
+static int control_backlight;
+static int bluetooth_auto_enable = 1;
+module_param(debug_ec, bool, S_IRUGO);
+MODULE_PARM_DESC(debug_ec,
+ "Present EC debugging interface in procfs. WARNING: writing to the "
+ "EC can hang your system and possibly damage your hardware.");
+module_param(control_backlight, bool, S_IRUGO);
+MODULE_PARM_DESC(control_backlight,
+ "Control backlight brightness; can conflict with ACPI video driver");
+module_param_named(debug, dbg_level, uint, S_IRUGO);
+MODULE_PARM_DESC(debug,
+ "Set debug verbosity level (0 = nothing, 7 = everything)");
+module_param(bluetooth_auto_enable, bool, S_IRUGO);
+MODULE_PARM_DESC(bluetooth_auto_enable,
+ "Automatically enable bluetooth (if supported by hardware) when the "
+ "module is loaded");
+
+/* general */
+
+static acpi_handle hkey_handle, ec0_handle;
+static struct platform_device *lensl_pdev;
+static struct input_dev *hkey_inputdev;
+static struct workqueue_struct *lensl_wq;
+
+static int parse_strtoul(const char *buf,
+ unsigned long max, unsigned long *value)
+{
+ int res;
+
+ res = strict_strtoul(buf, 0, value);
+ if (res)
+ return res;
+ if (*value > max)
+ return -EINVAL;
+ return 0;
+}
+
+static int lensl_acpi_int_func(acpi_handle handle, char *pathname, int *ret,
+ int n_arg, ...)
+{
+ acpi_status status;
+ struct acpi_object_list params;
+ union acpi_object in_obj[LENSL_MAX_ACPI_ARGS], out_obj;
+ struct acpi_buffer result, *resultp;
+ int i;
+ va_list ap;
+
+ if (!handle)
+ return -EINVAL;
+ if (n_arg < 0 || n_arg > LENSL_MAX_ACPI_ARGS)
+ return -EINVAL;
+ va_start(ap, n_arg);
+ for (i = 0; i < n_arg; i++) {
+ in_obj[i].integer.value = va_arg(ap, int);
+ in_obj[i].type = ACPI_TYPE_INTEGER;
+ }
+ va_end(ap);
+ params.count = n_arg;
+ params.pointer = in_obj;
+
+ if (ret) {
+ result.length = sizeof(out_obj);
+ result.pointer = &out_obj;
+ resultp = &result;
+ } else
+ resultp = NULL;
+
+ status = acpi_evaluate_object(handle, pathname, ¶ms, resultp);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+ if (ret)
+ *ret = out_obj.integer.value;
+
+ vdbg_printk(LENSL_DEBUG, "ACPI : %s(", pathname);
+ if (dbg_level >= LENSL_DEBUG) {
+ for (i = 0; i < n_arg; i++) {
+ if (i)
+ printk(", ");
+ printk("%d", (int)in_obj[i].integer.value);
+ }
+ printk(")");
+ if (ret)
+ printk(" == %d", *ret);
+ printk("\n");
+ }
+ return 0;
+}
+
+/*************************************************************************
+ bluetooth - copied nearly verbatim from thinkpad_acpi.c
+ *************************************************************************/
+
+enum {
+ LENSL_RFK_BLUETOOTH_SW_ID = 0,
+ LENSL_RFK_WWAN_SW_ID,
+};
+
+enum {
+ /* ACPI GBDC/SBDC bits */
+ TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
+ TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */
+ TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */
+};
+
+static struct rfkill *bluetooth_rfkill;
+static int bluetooth_present;
+static int bluetooth_pretend_blocked;
+
+static inline int get_wlsw(int *value)
+{
+ return lensl_acpi_int_func(hkey_handle, "WLSW", value, 0);
+}
+
+static inline int get_gbdc(int *value)
+{
+ return lensl_acpi_int_func(hkey_handle, "GBDC", value, 0);
+}
+
+static inline int set_sbdc(int value)
+{
+ return lensl_acpi_int_func(hkey_handle, "SBDC", NULL, 1, value);
+}
+
+static int bluetooth_get_radiosw(void)
+{
+ int value = 0;
+
+ if (!bluetooth_present)
+ return -ENODEV;
+
+ /* WLSW overrides bluetooth in firmware/hardware, reflect that */
+ if (bluetooth_pretend_blocked || (!get_wlsw(&value) && !value))
+ return RFKILL_STATE_HARD_BLOCKED;
+
+ if (get_gbdc(&value))
+ return -EIO;
+
+ return ((value & TP_ACPI_BLUETOOTH_RADIOSSW) != 0) ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
+}
+
+static void bluetooth_update_rfk(void)
+{
+ int result;
+
+ if (!bluetooth_rfkill)
+ return;
+
+ result = bluetooth_get_radiosw();
+ if (result < 0)
+ return;
+ rfkill_force_state(bluetooth_rfkill, result);
+}
+
+static int bluetooth_set_radiosw(int radio_on, int update_rfk)
+{
+ int value;
+
+ if (!bluetooth_present)
+ return -ENODEV;
+
+ /* WLSW overrides bluetooth in firmware/hardware, but there is no
+ * reason to risk weird behaviour. */
+ if (get_wlsw(&value) && !value && radio_on)
+ return -EPERM;
+
+ if (get_gbdc(&value))
+ return -EIO;
+ if (radio_on)
+ value |= TP_ACPI_BLUETOOTH_RADIOSSW;
+ else
+ value &= ~TP_ACPI_BLUETOOTH_RADIOSSW;
+ if (set_sbdc(value))
+ return -EIO;
+
+ if (update_rfk)
+ bluetooth_update_rfk();
+
+ return 0;
+}
+
+/*************************************************************************
+ bluetooth sysfs - copied nearly verbatim from thinkpad_acpi.c
+ *************************************************************************/
+
+static ssize_t bluetooth_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int status;
+
+ status = bluetooth_get_radiosw();
+ if (status < 0)
+ return status;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ (status == RFKILL_STATE_UNBLOCKED) ? 1 : 0);
+}
+
+static ssize_t bluetooth_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long t;
+ int res;
+
+ if (parse_strtoul(buf, 1, &t))
+ return -EINVAL;
+
+ res = bluetooth_set_radiosw(t, 1);
+
+ return (res) ? res : count;
+}
+
+static struct device_attribute dev_attr_bluetooth_enable =
+ __ATTR(bluetooth_enable, S_IWUSR | S_IRUGO,
+ bluetooth_enable_show, bluetooth_enable_store);
+
+static struct attribute *bluetooth_attributes[] = {
+ &dev_attr_bluetooth_enable.attr,
+ NULL
+};
+
+static const struct attribute_group bluetooth_attr_group = {
+ .attrs = bluetooth_attributes,
+};
+
+static int bluetooth_rfk_get(void *data, enum rfkill_state *state)
+{
+ int bts = bluetooth_get_radiosw();
+
+ if (bts < 0)
+ return bts;
+
+ *state = bts;
+ return 0;
+}
+
+static int bluetooth_rfk_set(void *data, enum rfkill_state state)
+{
+ return bluetooth_set_radiosw((state == RFKILL_STATE_UNBLOCKED), 0);
+}
+
+static int lensl_new_rfkill(const unsigned int id,
+ struct rfkill **rfk,
+ const enum rfkill_type rfktype,
+ const char *name,
+ int (*toggle_radio)(void *, enum rfkill_state),
+ int (*get_state)(void *, enum rfkill_state *))
+{
+ int res;
+ enum rfkill_state initial_state;
+
+ *rfk = rfkill_allocate(&lensl_pdev->dev, rfktype);
+ if (!*rfk) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to allocate memory for rfkill class\n");
+ return -ENOMEM;
+ }
+
+ (*rfk)->name = name;
+ (*rfk)->get_state = get_state;
+ (*rfk)->toggle_radio = toggle_radio;
+
+ if (!get_state(NULL, &initial_state))
+ (*rfk)->state = initial_state;
+
+ res = rfkill_register(*rfk);
+ if (res < 0) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to register %s rfkill switch: %d\n",
+ name, res);
+ rfkill_free(*rfk);
+ *rfk = NULL;
+ return res;
+ }
+
+ return 0;
+}
+
+static void bluetooth_exit(void)
+{
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
+
+ sysfs_remove_group(&lensl_pdev->dev.kobj,
+ &bluetooth_attr_group);
+}
+
+static int bluetooth_init(void)
+{
+ int value, res;
+ bluetooth_present = 0;
+ if (!hkey_handle)
+ return -ENODEV;
+ if (get_gbdc(&value))
+ return -EIO;
+ if (!(value & TP_ACPI_BLUETOOTH_HWPRESENT))
+ return -ENODEV;
+ bluetooth_present = 1;
+
+ res = sysfs_create_group(&lensl_pdev->dev.kobj,
+ &bluetooth_attr_group);
+ if (res) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to register bluetooth sysfs group\n");
+ return res;
+ }
+
+ bluetooth_pretend_blocked = !bluetooth_auto_enable;
+ res = lensl_new_rfkill(LENSL_RFK_BLUETOOTH_SW_ID,
+ &bluetooth_rfkill,
+ RFKILL_TYPE_BLUETOOTH,
+ "lensl_bluetooth_sw",
+ bluetooth_rfk_set,
+ bluetooth_rfk_get);
+ bluetooth_pretend_blocked = 0;
+ if (res) {
+ bluetooth_exit();
+ return res;
+ }
+ vdbg_printk(LENSL_DEBUG, "Initialized bluetooth subdriver\n");
+
+ return 0;
+}
+
+/*************************************************************************
+ backlight control - based on video.c
+ *************************************************************************/
+
+/* NB: the reason why this needs to be implemented here is that the SL series
+ uses the ACPI interface for controlling the backlight in a non-standard
+ manner. See http://bugzilla.kernel.org/show_bug.cgi?id=12249 */
+
+static acpi_handle lcdd_handle;
+static struct backlight_device *backlight;
+static struct lensl_vector {
+ int count;
+ int *values;
+} backlight_levels;
+
+static int get_bcl(struct lensl_vector *levels)
+{
+ int i, status;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *o, *obj;
+
+ if (!levels)
+ return -EINVAL;
+ if (levels->count) {
+ levels->count = 0;
+ kfree(levels->values);
+ }
+
+ /* _BCL returns an array sorted from high to low; the first two values
+ are *not* special (non-standard behavior) */
+ status = acpi_evaluate_object(lcdd_handle, "_BCL", NULL, &buffer);
+ if (!ACPI_SUCCESS(status))
+ return status;
+ obj = (union acpi_object *)buffer.pointer;
+ if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
+ vdbg_printk(LENSL_ERR, "Invalid _BCL data\n");
+ status = -EFAULT;
+ goto out;
+ }
+
+ levels->count = obj->package.count;
+ if (!levels->count)
+ goto out;
+ levels->values = kmalloc(levels->count * sizeof(int), GFP_KERNEL);
+ if (!levels->values) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to allocate memory for brightness levels\n");
+ status = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0; i < obj->package.count; i++) {
+ o = (union acpi_object *)&obj->package.elements[i];
+ if (o->type != ACPI_TYPE_INTEGER) {
+ vdbg_printk(LENSL_ERR, "Invalid brightness data\n");
+ goto err;
+ }
+ levels->values[i] = (int) o->integer.value;
+ }
+ goto out;
+
+err:
+ levels->count = 0;
+ kfree(levels->values);
+
+out:
+ kfree(buffer.pointer);
+
+ return status;
+}
+
+static inline int set_bcm(int level)
+{
+ /* standard behavior */
+ return lensl_acpi_int_func(lcdd_handle, "_BCM", NULL, 1, level);
+}
+
+static inline int get_bqc(int *level)
+{
+ /* returns an index from the bottom into the _BCL package
+ (non-standard behavior) */
+ return lensl_acpi_int_func(lcdd_handle, "_BQC", level, 0);
+}
+
+/* backlight device sysfs support */
+static int lensl_bd_get_brightness(struct backlight_device *bd)
+{
+ int level = 0;
+
+ if (get_bqc(&level))
+ return 0;
+
+ return level;
+}
+
+static int lensl_bd_set_brightness_int(int request_level)
+{
+ int n;
+ n = backlight_levels.count - request_level - 1;
+ if (n >= 0 && n < backlight_levels.count)
+ return set_bcm(backlight_levels.values[n]);
+
+ return -EINVAL;
+}
+
+static int lensl_bd_set_brightness(struct backlight_device *bd)
+{
+ if (!bd)
+ return -EINVAL;
+
+ return lensl_bd_set_brightness_int(bd->props.brightness);
+}
+
+static struct backlight_ops lensl_backlight_ops = {
+ .get_brightness = lensl_bd_get_brightness,
+ .update_status = lensl_bd_set_brightness,
+};
+
+static void backlight_exit(void)
+{
+ backlight_device_unregister(backlight);
+ backlight = NULL;
+ if (backlight_levels.count) {
+ kfree(backlight_levels.values);
+ backlight_levels.count = 0;
+ }
+}
+
+static int backlight_init(void)
+{
+ int status = 0;
+
+ lcdd_handle = NULL;
+ backlight = NULL;
+ backlight_levels.count = 0;
+ backlight_levels.values = NULL;
+
+ status = acpi_get_handle(NULL, LENSL_LCDD, &lcdd_handle);
+ if (ACPI_FAILURE(status)) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to get ACPI handle for %s\n", LENSL_LCDD);
+ return -EIO;
+ }
+
+ status = get_bcl(&backlight_levels);
+ if (status || !backlight_levels.count)
+ goto err;
+
+ backlight = backlight_device_register(LENSL_BACKLIGHT_NAME,
+ NULL, NULL, &lensl_backlight_ops);
+ backlight->props.max_brightness = backlight_levels.count - 1;
+ backlight->props.brightness = lensl_bd_get_brightness(backlight);
+ vdbg_printk(LENSL_INFO, "Started backlight brightness control\n");
+ goto out;
+err:
+ if (backlight_levels.count) {
+ kfree(backlight_levels.values);
+ backlight_levels.count = 0;
+ }
+ vdbg_printk(LENSL_ERR,
+ "Failed to start backlight brightness control\n");
+out:
+ return status;
+}
+
+/*************************************************************************
+ LEDs
+ *************************************************************************/
+
+#ifdef CONFIG_NEW_LEDS
+
+#define LENSL_LED_TV_OFF 0
+#define LENSL_LED_TV_ON 0x02
+#define LENSL_LED_TV_BLINK 0x01
+#define LENSL_LED_TV_DIM 0x100
+
+/* equivalent to the ThinkVantage LED on other ThinkPads */
+#define LENSL_LED_TV_NAME "lensl::lenovocare"
+
+struct {
+ struct led_classdev cdev;
+ enum led_brightness brightness;
+ int supported, new_code;
+ struct work_struct work;
+} led_tv;
+
+static inline int set_tvls(int code)
+{
+ return lensl_acpi_int_func(hkey_handle, "TVLS", NULL, 1, code);
+}
+
+static void led_tv_worker(struct work_struct *work)
+{
+ if (!led_tv.supported)
+ return;
+ set_tvls(led_tv.new_code);
+ if (led_tv.new_code)
+ led_tv.brightness = LED_FULL;
+ else
+ led_tv.brightness = LED_OFF;
+}
+
+static void led_tv_brightness_set_sysfs(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ switch (brightness) {
+ case LED_OFF:
+ led_tv.new_code = LENSL_LED_TV_OFF;
+ break;
+ case LED_FULL:
+ led_tv.new_code = LENSL_LED_TV_ON;
+ break;
+ default:
+ return;
+ }
+ queue_work(lensl_wq, &led_tv.work);
+}
+
+static enum led_brightness led_tv_brightness_get_sysfs(
+ struct led_classdev *led_cdev)
+{
+ return led_tv.brightness;
+}
+
+static int led_tv_blink_set_sysfs(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* If we can choose the flash rate, use dimmed blinking --
+ it looks better */
+ led_tv.new_code = LENSL_LED_TV_ON |
+ LENSL_LED_TV_BLINK | LENSL_LED_TV_DIM;
+ *delay_on = 2000;
+ *delay_off = 2000;
+ } else if (*delay_on + *delay_off == 4000) {
+ /* User wants dimmed blinking */
+ led_tv.new_code = LENSL_LED_TV_ON |
+ LENSL_LED_TV_BLINK | LENSL_LED_TV_DIM;
+ } else if (*delay_on == 7250 && *delay_off == 500) {
+ /* User wants standard blinking mode */
+ led_tv.new_code = LENSL_LED_TV_ON | LENSL_LED_TV_BLINK;
+ } else
+ return -EINVAL;
+ queue_work(lensl_wq, &led_tv.work);
+ return 0;
+}
+
+static void led_exit(void)
+{
+ if (led_tv.supported) {
+ led_classdev_unregister(&led_tv.cdev);
+ led_tv.supported = 0;
+ set_tvls(LENSL_LED_TV_OFF);
+ }
+}
+
+static int led_init(void)
+{
+ int res;
+
+ memset(&led_tv, 0, sizeof(led_tv));
+ led_tv.cdev.brightness_get = led_tv_brightness_get_sysfs;
+ led_tv.cdev.brightness_set = led_tv_brightness_set_sysfs;
+ led_tv.cdev.blink_set = led_tv_blink_set_sysfs;
+ led_tv.cdev.name = LENSL_LED_TV_NAME;
+ INIT_WORK(&led_tv.work, led_tv_worker);
+ set_tvls(LENSL_LED_TV_OFF);
+ res = led_classdev_register(&lensl_pdev->dev, &led_tv.cdev);
+ if (res) {
+ vdbg_printk(LENSL_WARNING, "Failed to register LED device\n");
+ return res;
+ }
+ led_tv.supported = 1;
+ vdbg_printk(LENSL_DEBUG, "Initialized LED subdriver\n");
+ return 0;
+}
+
+#else /* CONFIG_NEW_LEDS */
+
+static void led_exit(void)
+{
+}
+
+static int led_init(void)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_NEW_LEDS */
+
+/*************************************************************************
+ hwmon & fans
+ *************************************************************************/
+
+static struct device *lensl_hwmon_device;
+/* we do not have a reliable way of reading it from ACPI */
+static int pwm1_value = -1;
+/* corresponds to ~2700 rpm */
+#define DEFAULT_PWM1 126
+
+static inline int get_tach(int *value, int fan)
+{
+ return lensl_acpi_int_func(ec0_handle, "TACH", value, 1, fan);
+}
+
+static inline int get_decf(int *value)
+{
+ return lensl_acpi_int_func(ec0_handle, "DECF", value, 0);
+}
+
+/* speed must be in range 0 .. 255 */
+static inline int set_sfnv(int action, int speed)
+{
+ return lensl_acpi_int_func(ec0_handle, "SFNV", NULL, 2, action, speed);
+}
+
+static int pwm1_enable_get_current(void)
+{
+ int res;
+ int value;
+
+ res = get_decf(&value);
+ if (res)
+ return res;
+ if (value & 1)
+ return 1;
+ return 0;
+}
+
+static ssize_t fan1_input_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int res;
+ int rpm;
+
+ res = get_tach(&rpm, 0);
+ if (res)
+ return res;
+ return snprintf(buf, PAGE_SIZE, "%u\n", rpm);
+}
+
+static ssize_t pwm1_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (pwm1_value > -1)
+ return snprintf(buf, PAGE_SIZE, "%u\n", pwm1_value);
+ return -EPERM;
+}
+
+static ssize_t pwm1_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int status, res = 0;
+ unsigned long speed;
+ if (parse_strtoul(buf, 255, &speed))
+ return -EINVAL;
+ status = pwm1_enable_get_current();
+ if (status < 0)
+ return status;
+ if (status > 0)
+ res = set_sfnv(1, speed);
+
+ if (res)
+ return res;
+ pwm1_value = speed;
+ return count;
+}
+
+static ssize_t pwm1_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int status;
+ status = pwm1_enable_get_current();
+ if (status < 0)
+ return status;
+ return snprintf(buf, PAGE_SIZE, "%u\n", status);
+}
+
+static ssize_t pwm1_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int res, speed;
+ unsigned long status;
+
+ if (parse_strtoul(buf, 1, &status))
+ return -EINVAL;
+
+ if (status && pwm1_value > -1)
+ speed = pwm1_value;
+ else
+ speed = DEFAULT_PWM1;
+
+ res = set_sfnv(status, speed);
+
+ if (res)
+ return res;
+ pwm1_value = speed;
+ return count;
+}
+
+static struct device_attribute dev_attr_fan1_input =
+ __ATTR(fan1_input, S_IRUGO,
+ fan1_input_show, NULL);
+static struct device_attribute dev_attr_pwm1 =
+ __ATTR(pwm1, S_IWUSR | S_IRUGO,
+ pwm1_show, pwm1_store);
+static struct device_attribute dev_attr_pwm1_enable =
+ __ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
+ pwm1_enable_show, pwm1_enable_store);
+
+static struct attribute *hwmon_attributes[] = {
+ &dev_attr_pwm1_enable.attr, &dev_attr_pwm1.attr,
+ &dev_attr_fan1_input.attr,
+ NULL
+};
+
+static const struct attribute_group hwmon_attr_group = {
+ .attrs = hwmon_attributes,
+};
+
+static void hwmon_exit(void)
+{
+ if (!lensl_hwmon_device)
+ return;
+
+ sysfs_remove_group(&lensl_hwmon_device->kobj,
+ &hwmon_attr_group);
+ hwmon_device_unregister(lensl_hwmon_device);
+ lensl_hwmon_device = NULL;
+ /* switch fans to automatic mode on module unload */
+ set_sfnv(0, DEFAULT_PWM1);
+}
+
+static int hwmon_init(void)
+{
+ int res;
+
+ pwm1_value = -1;
+ lensl_hwmon_device = hwmon_device_register(&lensl_pdev->dev);
+ if (!lensl_hwmon_device) {
+ vdbg_printk(LENSL_ERR, "Failed to register hwmon device\n");
+ return -ENODEV;
+ }
+
+ res = sysfs_create_group(&lensl_hwmon_device->kobj,
+ &hwmon_attr_group);
+ if (res < 0) {
+ vdbg_printk(LENSL_ERR, "Failed to create hwmon sysfs group\n");
+ hwmon_device_unregister(lensl_hwmon_device);
+ lensl_hwmon_device = NULL;
+ return -ENODEV;
+ }
+ vdbg_printk(LENSL_DEBUG, "Initialized hwmon subdriver\n");
+ return 0;
+}
+
+/*************************************************************************
+ hotkeys
+ *************************************************************************/
+
+static int hkey_poll_hz = 5;
+static u8 hkey_ec_prev_offset;
+static struct mutex hkey_poll_mutex;
+static struct task_struct *hkey_poll_task;
+
+struct key_entry {
+ char type;
+ u8 scancode;
+ int keycode;
+};
+
+enum { KE_KEY, KE_END };
+
+static struct key_entry ec_keymap[] = {
+ /* Fn F2 */
+ {KE_KEY, 0x0B, KEY_COFFEE },
+ /* Fn F3 */
+ {KE_KEY, 0x0C, KEY_BATTERY },
+ /* Fn F4; dispatches an ACPI event */
+ {KE_KEY, 0x0D, /* KEY_SLEEP */ KEY_RESERVED },
+ /* Fn F5; FIXME: should this be KEY_BLUETOOTH? */
+ {KE_KEY, 0x0E, KEY_WLAN },
+ /* Fn F7; dispatches an ACPI event */
+ {KE_KEY, 0x10, /* KEY_SWITCHVIDEOMODE */ KEY_RESERVED },
+ /* Fn F8 - ultranav; FIXME: find some keycode that fits this properly */
+ {KE_KEY, 0x11, KEY_PROG1 },
+ /* Fn F9 */
+ {KE_KEY, 0x12, KEY_EJECTCD },
+ /* Fn F12 */
+ {KE_KEY, 0x15, KEY_SUSPEND },
+ {KE_KEY, 0x69, KEY_VOLUMEUP },
+ {KE_KEY, 0x6A, KEY_VOLUMEDOWN },
+ {KE_KEY, 0x6B, KEY_MUTE },
+ /* Fn Home; dispatches an ACPI event */
+ {KE_KEY, 0x6C, KEY_BRIGHTNESSDOWN /*KEY_RESERVED*/ },
+ /* Fn End; dispatches an ACPI event */
+ {KE_KEY, 0x6D, KEY_BRIGHTNESSUP /*KEY_RESERVED*/ },
+ /* Fn spacebar - zoom */
+ {KE_KEY, 0x71, KEY_ZOOM },
+ /* Lenovo Care key */
+ {KE_KEY, 0x80, KEY_VENDOR },
+ {KE_END, 0},
+};
+
+static int ec_scancode_to_keycode(u8 scancode)
+{
+ struct key_entry *key;
+
+ for (key = ec_keymap; key->type != KE_END; key++)
+ if (scancode == key->scancode)
+ return key->keycode;
+
+ return -EINVAL;
+}
+
+static int hkey_inputdev_getkeycode(struct input_dev *dev, int scancode,
+ int *keycode)
+{
+ int result;
+
+ if (!dev)
+ return -EINVAL;
+
+ result = ec_scancode_to_keycode(scancode);
+ if (result >= 0) {
+ *keycode = result;
+ return 0;
+ }
+ return result;
+}
+
+static int hkey_inputdev_setkeycode(struct input_dev *dev, int scancode,
+ int keycode)
+{
+ struct key_entry *key;
+
+ if (!dev)
+ return -EINVAL;
+
+ for (key = ec_keymap; key->type != KE_END; key++)
+ if (scancode == key->scancode) {
+ clear_bit(key->keycode, dev->keybit);
+ key->keycode = keycode;
+ set_bit(key->keycode, dev->keybit);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int hkey_ec_get_offset(void)
+{
+ /* Hotkey events are stored in EC registers 0x0A .. 0x11
+ * Address of last event is stored in EC registers 0x12 and
+ * 0x14; if address is 0x01, last event is in register 0x0A;
+ * if address is 0x07, last event is in register 0x10;
+ * if address is 0x00, last event is in register 0x11 */
+
+ u8 offset;
+
+ if (ec_read(0x12, &offset))
+ return -EINVAL;
+ if (!offset)
+ offset = 8;
+ offset -= 1;
+ if (offset > 7)
+ return -EINVAL;
+ return offset;
+}
+
+static int hkey_poll_kthread(void *data)
+{
+ unsigned long t = 0;
+ int offset, level;
+ unsigned int keycode;
+ u8 scancode;
+
+ mutex_lock(&hkey_poll_mutex);
+
+ offset = hkey_ec_get_offset();
+ if (offset < 0) {
+ vdbg_printk(LENSL_WARNING,
+ "Failed to read hotkey register offset from EC\n");
+ hkey_ec_prev_offset = 0;
+ } else
+ hkey_ec_prev_offset = offset;
+
+ while (!kthread_should_stop() && hkey_poll_hz) {
+ if (t == 0)
+ t = 1000/hkey_poll_hz;
+ t = msleep_interruptible(t);
+ if (unlikely(kthread_should_stop()))
+ break;
+ try_to_freeze();
+ if (t > 0)
+ continue;
+ offset = hkey_ec_get_offset();
+ if (offset < 0) {
+ vdbg_printk(LENSL_WARNING,
+ "Failed to read hotkey register offset from EC\n");
+ continue;
+ }
+ if (offset == hkey_ec_prev_offset)
+ continue;
+
+ if (ec_read(0x0A + offset, &scancode)) {
+ vdbg_printk(LENSL_WARNING,
+ "Failed to read hotkey code from EC\n");
+ continue;
+ }
+ keycode = ec_scancode_to_keycode(scancode);
+ vdbg_printk(LENSL_DEBUG,
+ "Got hotkey keycode %d (scancode %d)\n", keycode, scancode);
+
+ /* Special handling for brightness keys. We do it here and not
+ via an ACPI notifier in order to prevent possible conflicts
+ with video.c */
+ if (keycode == KEY_BRIGHTNESSDOWN) {
+ if (control_backlight && backlight) {
+ level = lensl_bd_get_brightness(backlight);
+ if (0 <= --level)
+ lensl_bd_set_brightness_int(level);
+ } else
+ keycode = KEY_RESERVED;
+ } else if (keycode == KEY_BRIGHTNESSUP) {
+ if (control_backlight && backlight) {
+ level = lensl_bd_get_brightness(backlight);
+ if (backlight_levels.count > ++level)
+ lensl_bd_set_brightness_int(level);
+ } else
+ keycode = KEY_RESERVED;
+ }
+
+ if (keycode != KEY_RESERVED) {
+ input_report_key(hkey_inputdev, keycode, 1);
+ input_sync(hkey_inputdev);
+ input_report_key(hkey_inputdev, keycode, 0);
+ input_sync(hkey_inputdev);
+ }
+ hkey_ec_prev_offset = offset;
+ }
+
+ mutex_unlock(&hkey_poll_mutex);
+ return 0;
+}
+
+static void hkey_poll_start(void)
+{
+ hkey_ec_prev_offset = 0;
+ mutex_lock(&hkey_poll_mutex);
+ hkey_poll_task = kthread_run(hkey_poll_kthread,
+ NULL, LENSL_HKEY_POLL_KTHREAD_NAME);
+ if (IS_ERR(hkey_poll_task)) {
+ hkey_poll_task = NULL;
+ vdbg_printk(LENSL_ERR,
+ "Could not create kernel thread for hotkey polling\n");
+ }
+ mutex_unlock(&hkey_poll_mutex);
+}
+
+static void hkey_poll_stop(void)
+{
+ if (hkey_poll_task) {
+ if (frozen(hkey_poll_task) || freezing(hkey_poll_task))
+ thaw_process(hkey_poll_task);
+
+ kthread_stop(hkey_poll_task);
+ hkey_poll_task = NULL;
+ mutex_lock(&hkey_poll_mutex);
+ /* at this point, the thread did exit */
+ mutex_unlock(&hkey_poll_mutex);
+ }
+}
+
+static void hkey_inputdev_exit(void)
+{
+ if (hkey_inputdev)
+ input_unregister_device(hkey_inputdev);
+ hkey_inputdev = NULL;
+}
+
+static int hkey_inputdev_init(void)
+{
+ int result;
+ struct key_entry *key;
+
+ hkey_inputdev = input_allocate_device();
+ if (!hkey_inputdev) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to allocate hotkey input device\n");
+ return -ENODEV;
+ }
+ hkey_inputdev->name = "Lenovo ThinkPad SL Series extra buttons";
+ hkey_inputdev->phys = LENSL_HKEY_FILE "/input0";
+ hkey_inputdev->uniq = LENSL_HKEY_FILE;
+ hkey_inputdev->id.bustype = BUS_HOST;
+ hkey_inputdev->id.vendor = PCI_VENDOR_ID_LENOVO;
+ hkey_inputdev->getkeycode = hkey_inputdev_getkeycode;
+ hkey_inputdev->setkeycode = hkey_inputdev_setkeycode;
+ set_bit(EV_KEY, hkey_inputdev->evbit);
+
+ for (key = ec_keymap; key->type != KE_END; key++)
+ set_bit(key->keycode, hkey_inputdev->keybit);
+
+ result = input_register_device(hkey_inputdev);
+ if (result) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to register hotkey input device\n");
+ input_free_device(hkey_inputdev);
+ hkey_inputdev = NULL;
+ return -ENODEV;
+ }
+ vdbg_printk(LENSL_DEBUG, "Initialized hotkey subdriver\n");
+ return 0;
+}
+
+
+/*************************************************************************
+ procfs debugging interface
+ *************************************************************************/
+
+#define LENSL_PROC_EC "ec0"
+#define LENSL_PROC_DIRNAME LENSL_MODULE_NAME
+
+static struct proc_dir_entry *proc_dir;
+
+int lensl_ec_read_procmem(char *buf, char **start, off_t offset,
+ int count, int *eof, void *data)
+{
+ int err, len = 0;
+ u8 i, result;
+ /* note: ec_read at i = 255 locks up my SL300 hard. -AR */
+ for (i = 0; i < 255; i++) {
+ if (!(i % 16)) {
+ if (i)
+ len += sprintf(buf+len, "\n");
+ len += sprintf(buf+len, "%02X:", i);
+ }
+ err = ec_read(i, &result);
+ if (!err)
+ len += sprintf(buf+len, " %02X", result);
+ else
+ len += sprintf(buf+len, " **");
+ }
+ len += sprintf(buf+len, "\n");
+ *eof = 1;
+ return len;
+}
+
+/* we expect input in the format "%02X %02X", where the first number is
+ the EC register and the second is the value to be written */
+int lensl_ec_write_procmem(struct file *file, const char *buffer,
+ unsigned long count, void *data)
+{
+ char s[7];
+ unsigned int reg, val;
+
+ if (count > 6)
+ return -EINVAL;
+ memset(s, 0, 7);
+ if (copy_from_user(s, buffer, count))
+ return -EFAULT;
+ if (sscanf(s, "%02X %02X", ®, &val) < 2)
+ return -EINVAL;
+ if (reg > 255 || val > 255)
+ return -EINVAL;
+ if (ec_write(reg, val))
+ return -EIO;
+ return count;
+}
+
+static void lenovo_sl_procfs_exit(void)
+{
+ if (proc_dir) {
+ remove_proc_entry(LENSL_PROC_EC, proc_dir);
+ remove_proc_entry(LENSL_PROC_DIRNAME, acpi_root_dir);
+ }
+}
+
+static int lenovo_sl_procfs_init(void)
+{
+ struct proc_dir_entry *proc_ec;
+
+ proc_dir = proc_mkdir(LENSL_PROC_DIRNAME, acpi_root_dir);
+ if (!proc_dir) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to create proc dir acpi/%s/\n", LENSL_PROC_DIRNAME);
+ return -ENOENT;
+ }
+ proc_dir->owner = THIS_MODULE;
+ proc_ec = create_proc_entry(LENSL_PROC_EC, 0600, proc_dir);
+ if (!proc_ec) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to create proc entry acpi/%s/%s\n",
+ LENSL_PROC_DIRNAME, LENSL_PROC_EC);
+ return -ENOENT;
+ }
+ proc_ec->read_proc = lensl_ec_read_procmem;
+ proc_ec->write_proc = lensl_ec_write_procmem;
+ vdbg_printk(LENSL_DEBUG, "Initialized procfs debugging interface\n");
+
+ return 0;
+}
+
+/*************************************************************************
+ init/exit
+ *************************************************************************/
+
+static int __init lenovo_sl_laptop_init(void)
+{
+ int ret;
+ acpi_status status;
+
+ if (!acpi_video_backlight_support())
+ control_backlight = 1;
+
+ hkey_handle = ec0_handle = NULL;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ lensl_wq = create_singlethread_workqueue(LENSL_WORKQUEUE_NAME);
+ if (!lensl_wq) {
+ vdbg_printk(LENSL_ERR, "Failed to create a workqueue\n");
+ return -ENOMEM;
+ }
+
+ status = acpi_get_handle(NULL, LENSL_HKEY, &hkey_handle);
+ if (ACPI_FAILURE(status)) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to get ACPI handle for %s\n", LENSL_HKEY);
+ return -ENODEV;
+ }
+ status = acpi_get_handle(NULL, LENSL_EC0, &ec0_handle);
+ if (ACPI_FAILURE(status)) {
+ vdbg_printk(LENSL_ERR,
+ "Failed to get ACPI handle for %s\n", LENSL_EC0);
+ return -ENODEV;
+ }
+
+ lensl_pdev = platform_device_register_simple(LENSL_DRVR_NAME, -1,
+ NULL, 0);
+ if (IS_ERR(lensl_pdev)) {
+ ret = PTR_ERR(lensl_pdev);
+ lensl_pdev = NULL;
+ vdbg_printk(LENSL_ERR, "Failed to register platform device\n");
+ return ret;
+ }
+
+ ret = hkey_inputdev_init();
+ if (ret)
+ return -ENODEV;
+
+ bluetooth_init();
+ if (control_backlight)
+ backlight_init();
+
+ led_init();
+ mutex_init(&hkey_poll_mutex);
+ hkey_poll_start();
+ hwmon_init();
+
+ if (debug_ec)
+ lenovo_sl_procfs_init();
+
+ vdbg_printk(LENSL_INFO, "Loaded Lenovo ThinkPad SL Series driver\n");
+ return 0;
+}
+
+static void __exit lenovo_sl_laptop_exit(void)
+{
+ lenovo_sl_procfs_exit();
+ hwmon_exit();
+ hkey_poll_stop();
+ led_exit();
+ backlight_exit();
+ bluetooth_exit();
+ hkey_inputdev_exit();
+ if (lensl_pdev)
+ platform_device_unregister(lensl_pdev);
+ destroy_workqueue(lensl_wq);
+ vdbg_printk(LENSL_INFO, "Unloaded Lenovo ThinkPad SL Series driver\n");
+}
+
+MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad SL*:rvnLENOVO:*");
+
+module_init(lenovo_sl_laptop_init);
+module_exit(lenovo_sl_laptop_exit);
lenovo-sl-laptop is a new driver that adds support for hotkeys, bluetooth, LEDs, fan speed and screen brightness on the Lenovo ThinkPad SL series laptops. [1] These laptops are not supported by the normal thinkpad_acpi driver because their firmware is quite different from the "real" ThinkPads. [2] Based on advice from linux-thinkpad and linux-kernel mailing lists, I am posting it to linux-acpi for review and, hopefully, eventual inclusion. Patch against current checkout of 2.6.29-rc5 is below. Changes since previous post on linux-kernel: fan speed hwmon interface added. One important note concerning the backlight. Currently, the ACPI video driver has poor support for the ThinkPad SL series because their _BCL and _BQC methods violate the ACPI spec. Thus, the lenovo-sl-laptop driver adds optional (controlled via module parameter, default off) support for setting the backlight brightness. Zhang Rui has stated that he will be working on making the ACPI video driver properly support the ThinkPad SL series and other laptops with non-standard backlight brightness interfaces. When he is finished, backlight functionality can probably be safely removed from lenovo-sl-laptop. [3] [1] homepage : http://github.com/tetromino/lenovo-sl-laptop/tree/master [2] http://mailman.linux-thinkpad.org/pipermail/linux-thinkpad/2009-January/046122.html [3] http://bugzilla.kernel.org/show_bug.cgi?id=12249 Signed-off-by: Alexandre Rostovtsev <tetromino@gmail.com> Documentation/laptops/lenovo-sl-laptop.txt | 137 +++ drivers/platform/x86/Kconfig | 18 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/lenovo-sl-laptop.c | 1310 ++++++++++++++++++++++++++++ 4 files changed, 1466 insertions(+), 0 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html