diff mbox series

selftests/sgx: Improve cgroup test scripts

Message ID 20240331174442.51019-1-haitao.huang@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series selftests/sgx: Improve cgroup test scripts | expand

Commit Message

Haitao Huang March 31, 2024, 5:44 p.m. UTC
Make cgroup test scripts ash compatible.
Remove cg-tools dependency.
Add documentation for functions.

Tested with busybox on Ubuntu.

Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
---
 tools/testing/selftests/sgx/ash_cgexec.sh     |  58 ++++++
 .../selftests/sgx/run_epc_cg_selftests.sh     | 171 +++++++++++-------
 .../selftests/sgx/watch_misc_for_tests.sh     |  13 +-
 3 files changed, 165 insertions(+), 77 deletions(-)
 create mode 100755 tools/testing/selftests/sgx/ash_cgexec.sh


base-commit: 0d0d598f09a5ef12412b797fa160947febcd1777

Comments

Jarkko Sakkinen April 1, 2024, 2:22 p.m. UTC | #1
On Sun Mar 31, 2024 at 8:44 PM EEST, Haitao Huang wrote:
> Make cgroup test scripts ash compatible.
> Remove cg-tools dependency.
> Add documentation for functions.
>
> Tested with busybox on Ubuntu.
>
> Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>

I'll run this next week on good old NUC7. Thank you.

I really wish that either (hopefully both) Intel or AMD would bring up
for developers home use meant platform to develop on TDX and SNP. It is
a shame that the latest and greatest is from 2018.

BR, Jarkko
Haitao Huang April 1, 2024, 10:55 p.m. UTC | #2
On Mon, 01 Apr 2024 09:22:21 -0500, Jarkko Sakkinen <jarkko@kernel.org>  
wrote:

> On Sun Mar 31, 2024 at 8:44 PM EEST, Haitao Huang wrote:
>> Make cgroup test scripts ash compatible.
>> Remove cg-tools dependency.
>> Add documentation for functions.
>>
>> Tested with busybox on Ubuntu.
>>
>> Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
>
> I'll run this next week on good old NUC7. Thank you.
>
> I really wish that either (hopefully both) Intel or AMD would bring up
> for developers home use meant platform to develop on TDX and SNP. It is
> a shame that the latest and greatest is from 2018.
>
> BR, Jarkko
>

Argh, missed a few changes for v2 cgroup:

--- a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
+++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
@@ -15,6 +15,8 @@ CG_MEM_ROOT=/sys/fs/cgroup
  CG_V1=0
  if [ ! -d "/sys/fs/cgroup/misc" ]; then
      echo "# cgroup V2 is in use."
+    echo "+misc" >  $CG_MISC_ROOT/cgroup.subtree_control
+    echo "+memory" > $CG_MEM_ROOT/cgroup.subtree_control
  else
      echo "# cgroup V1 is in use."
      CG_MISC_ROOT=/sys/fs/cgroup/misc
@@ -26,6 +28,11 @@ mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB2
  mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB3
  mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB4

+if [ $CG_V1 -eq 0 ]; then
+echo "+misc" >  $CG_MISC_ROOT/$TEST_ROOT_CG/cgroup.subtree_control
+echo "+misc" >  $CG_MISC_ROOT/$TEST_CG_SUB1/cgroup.subtree_control
+fi
Jarkko Sakkinen April 2, 2024, 7:37 a.m. UTC | #3
On Tue Apr 2, 2024 at 1:55 AM EEST, Haitao Huang wrote:
> On Mon, 01 Apr 2024 09:22:21 -0500, Jarkko Sakkinen <jarkko@kernel.org>  
> wrote:
>
> > On Sun Mar 31, 2024 at 8:44 PM EEST, Haitao Huang wrote:
> >> Make cgroup test scripts ash compatible.
> >> Remove cg-tools dependency.
> >> Add documentation for functions.
> >>
> >> Tested with busybox on Ubuntu.
> >>
> >> Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
> >
> > I'll run this next week on good old NUC7. Thank you.
> >
> > I really wish that either (hopefully both) Intel or AMD would bring up
> > for developers home use meant platform to develop on TDX and SNP. It is
> > a shame that the latest and greatest is from 2018.
> >
> > BR, Jarkko
> >
>
> Argh, missed a few changes for v2 cgroup:
>
> --- a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
> +++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
> @@ -15,6 +15,8 @@ CG_MEM_ROOT=/sys/fs/cgroup
>   CG_V1=0
>   if [ ! -d "/sys/fs/cgroup/misc" ]; then
>       echo "# cgroup V2 is in use."
> +    echo "+misc" >  $CG_MISC_ROOT/cgroup.subtree_control
> +    echo "+memory" > $CG_MEM_ROOT/cgroup.subtree_control
>   else
>       echo "# cgroup V1 is in use."
>       CG_MISC_ROOT=/sys/fs/cgroup/misc
> @@ -26,6 +28,11 @@ mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB2
>   mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB3
>   mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB4
>
> +if [ $CG_V1 -eq 0 ]; then
> +echo "+misc" >  $CG_MISC_ROOT/$TEST_ROOT_CG/cgroup.subtree_control
> +echo "+misc" >  $CG_MISC_ROOT/$TEST_CG_SUB1/cgroup.subtree_control
> +fi

Maybe it would be most convenient just to +1 the kselftest patch?

Alternatively you could point out to a Git branch with the series
and the updated patch.

BR, Jarkko
diff mbox series

Patch

diff --git a/tools/testing/selftests/sgx/ash_cgexec.sh b/tools/testing/selftests/sgx/ash_cgexec.sh
new file mode 100755
index 000000000000..51232d6452a8
--- /dev/null
+++ b/tools/testing/selftests/sgx/ash_cgexec.sh
@@ -0,0 +1,58 @@ 
+#!/usr/bin/env sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2024 Intel Corporation.
+
+# Move the current shell process to the specified cgroup
+# Arguments:
+# 	$1 - The cgroup controller name, e.g., misc, memory.
+#	$2 - The path of the cgroup,
+#		relative to /sys/fs/cgroup for cgroup v2,
+#		relative to /sys/fs/cgroup/$1 for v1.
+move_to_cgroup() {
+    controllers="$1"
+    path="$2"
+
+    # Check if cgroup v2 is in use
+    if [ ! -d "/sys/fs/cgroup/misc" ]; then
+        # Cgroup v2 logic
+        cgroup_full_path="/sys/fs/cgroup/${path}"
+        echo $$ > "${cgroup_full_path}/cgroup.procs"
+    else
+        # Cgroup v1 logic
+        OLD_IFS="$IFS"
+        IFS=','
+        for controller in $controllers; do
+            cgroup_full_path="/sys/fs/cgroup/${controller}/${path}"
+            echo $$ > "${cgroup_full_path}/tasks"
+        done
+        IFS="$OLD_IFS"
+    fi
+}
+
+if [ "$#" -lt 3 ] || [ "$1" != "-g" ]; then
+    echo "Usage: $0 -g <controller1,controller2:path> [-g <controller3:path> ...] <command> [args...]"
+    exit 1
+fi
+
+while [ "$#" -gt 0 ]; do
+    case "$1" in
+        -g)
+            # Ensure that a controller:path pair is provided after -g
+            if [ -z "$2" ]; then
+                echo "Error: Missing controller:path argument after -g"
+                exit 1
+            fi
+            IFS=':' read CONTROLLERS CGROUP_PATH <<EOF
+$2
+EOF
+            move_to_cgroup "$CONTROLLERS" "$CGROUP_PATH"
+            shift 2
+            ;;
+        *)
+            # Execute the command within the cgroup
+            exec "$@"
+            ;;
+    esac
+done
+
+
diff --git a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
index e027bf39f005..b9c73ab784cb 100755
--- a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
+++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
@@ -1,24 +1,14 @@ 
-#!/bin/bash
+#!/usr/bin/env sh
 # SPDX-License-Identifier: GPL-2.0
-# Copyright(c) 2023 Intel Corporation.
+# Copyright(c) 2023, 2024 Intel Corporation.
 
 TEST_ROOT_CG=selftest
-cgcreate -g misc:$TEST_ROOT_CG
-if [ $? -ne 0 ]; then
-    echo "# Please make sure cgroup-tools is installed, and misc cgroup is mounted."
-    exit 1
-fi
 TEST_CG_SUB1=$TEST_ROOT_CG/test1
 TEST_CG_SUB2=$TEST_ROOT_CG/test2
 # We will only set limit in test1 and run tests in test3
 TEST_CG_SUB3=$TEST_ROOT_CG/test1/test3
 TEST_CG_SUB4=$TEST_ROOT_CG/test4
 
-cgcreate -g misc:$TEST_CG_SUB1
-cgcreate -g misc:$TEST_CG_SUB2
-cgcreate -g misc:$TEST_CG_SUB3
-cgcreate -g misc:$TEST_CG_SUB4
-
 # Default to V2
 CG_MISC_ROOT=/sys/fs/cgroup
 CG_MEM_ROOT=/sys/fs/cgroup
@@ -31,6 +21,10 @@  else
     CG_MEM_ROOT=/sys/fs/cgroup/memory
     CG_V1=1
 fi
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB1
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB2
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB3
+mkdir -p $CG_MISC_ROOT/$TEST_CG_SUB4
 
 CAPACITY=$(grep "sgx_epc" "$CG_MISC_ROOT/misc.capacity" | awk '{print $2}')
 # This is below number of VA pages needed for enclave of capacity size. So
@@ -48,34 +42,66 @@  echo "sgx_epc $SMALL" > $CG_MISC_ROOT/$TEST_CG_SUB1/misc.max
 echo "sgx_epc $LARGE" >  $CG_MISC_ROOT/$TEST_CG_SUB2/misc.max
 echo "sgx_epc $LARGER" > $CG_MISC_ROOT/$TEST_CG_SUB4/misc.max
 
+if [ $? -ne 0 ]; then
+    echo "# Failed setting up misc limits, make sure misc cgroup is mounted."
+    exit 1
+fi
+
+clean_up_misc()
+{
+rmdir $CG_MISC_ROOT/$TEST_CG_SUB2
+rmdir $CG_MISC_ROOT/$TEST_CG_SUB3
+rmdir $CG_MISC_ROOT/$TEST_CG_SUB4
+rmdir $CG_MISC_ROOT/$TEST_CG_SUB1
+rmdir $CG_MISC_ROOT/$TEST_ROOT_CG
+}
+
 timestamp=$(date +%Y%m%d_%H%M%S)
 
 test_cmd="./test_sgx -t unclobbered_vdso_oversubscribed"
 
+# Wait for a process and check for expected exit status.
+#
+# Arguments:
+#	$1 - the pid of the process to wait and check.
+#	$2 - 1 if expecting success, 0 for failure.
+#
+# Return:
+#	0 if the exit status of the process matches the expectation.
+#	1 otherwise.
 wait_check_process_status() {
-    local pid=$1
-    local check_for_success=$2  # If 1, check for success;
-                                # If 0, check for failure
+    pid=$1
+    check_for_success=$2  # If 1, check for success;
+                          # If 0, check for failure
     wait "$pid"
-    local status=$?
+    status=$?
 
-    if [[ $check_for_success -eq 1 && $status -eq 0 ]]; then
+    if [ $check_for_success -eq 1 ] && [ $status -eq 0 ]; then
         echo "# Process $pid succeeded."
         return 0
-    elif [[ $check_for_success -eq 0 && $status -ne 0 ]]; then
+    elif [ $check_for_success -eq 0 ] && [ $status -ne 0 ]; then
         echo "# Process $pid returned failure."
         return 0
     fi
     return 1
 }
 
+# Wait for a set of processes and check for expected exit status
+#
+# Arguments:
+#	$1 - 1 if expecting success, 0 for failure.
+#	remaining args - The pids of the processes
+#
+# Return:
+#	0 if exit status of any process matches the expectation.
+#	1 otherwise.
 wait_and_detect_for_any() {
-    local pids=("$@")
-    local check_for_success=$1  # If 1, check for success;
-                                # If 0, check for failure
-    local detected=1 # 0 for success detection
+    check_for_success=$1  # If 1, check for success;
+                          # If 0, check for failure
+    shift
+    detected=1 # 0 for success detection
 
-    for pid in "${pids[@]:1}"; do
+    for pid in $@; do
         if wait_check_process_status "$pid" "$check_for_success"; then
             detected=0
             # Wait for other processes to exit
@@ -88,10 +114,10 @@  wait_and_detect_for_any() {
 echo "# Start unclobbered_vdso_oversubscribed with SMALL limit, expecting failure..."
 # Always use leaf node of misc cgroups so it works for both v1 and v2
 # these may fail on OOM
-cgexec -g misc:$TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log 2>&1
-if [[ $? -eq 0 ]]; then
+./ash_cgexec.sh -g misc:$TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log 2>&1
+if [ $? -eq 0 ]; then
     echo "# Fail on SMALL limit, not expecting any test passes."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 else
     echo "# Test failed as expected."
@@ -102,54 +128,54 @@  echo "# PASSED SMALL limit."
 echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests with LARGE limit,
         expecting at least one success...."
 
-pids=()
-for i in {1..4}; do
+pids=""
+for i in 1 2 3 4; do
     (
-        cgexec -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_positive_$timestamp.$i.log 2>&1
+        ./ash_cgexec.sh -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_positive_$timestamp.$i.log 2>&1
     ) &
-    pids+=($!)
+    pids="$pids $!"
 done
 
 
-if wait_and_detect_for_any 1 "${pids[@]}"; then
+if wait_and_detect_for_any 1 "$pids"; then
     echo "# PASSED LARGE limit positive testing."
 else
     echo "# Failed on LARGE limit positive testing, no test passes."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 fi
 
 echo "# Start 5 concurrent unclobbered_vdso_oversubscribed tests with LARGE limit,
         expecting at least one failure...."
-pids=()
-for i in {1..5}; do
+pids=""
+for i in 1 2 3 4 5; do
     (
-        cgexec -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_negative_$timestamp.$i.log 2>&1
+        ./ash_cgexec.sh -g misc:$TEST_CG_SUB2 $test_cmd >cgtest_large_negative_$timestamp.$i.log 2>&1
     ) &
-    pids+=($!)
+    pids="$pids $!"
 done
 
-if wait_and_detect_for_any 0 "${pids[@]}"; then
+if wait_and_detect_for_any 0 "$pids"; then
     echo "# PASSED LARGE limit negative testing."
 else
     echo "# Failed on LARGE limit negative testing, no test fails."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 fi
 
 echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests with LARGER limit,
         expecting no failure...."
-pids=()
-for i in {1..8}; do
+pids=""
+for i in 1 2 3 4 5 6 7 8; do
     (
-        cgexec -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_$timestamp.$i.log 2>&1
+        ./ash_cgexec.sh -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_$timestamp.$i.log 2>&1
     ) &
-    pids+=($!)
+    pids="$pids $!"
 done
 
-if wait_and_detect_for_any 0 "${pids[@]}"; then
+if wait_and_detect_for_any 0 "$pids"; then
     echo "# Failed on LARGER limit, at least one test fails."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 else
     echo "# PASSED LARGER limit tests."
@@ -157,51 +183,58 @@  fi
 
 echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests with LARGER limit,
       randomly kill one, expecting no failure...."
-pids=()
-for i in {1..8}; do
+pids=""
+for i in 1 2 3 4 5 6 7 8; do
     (
-        cgexec -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_kill_$timestamp.$i.log 2>&1
+        ./ash_cgexec.sh -g misc:$TEST_CG_SUB4 $test_cmd >cgtest_larger_kill_$timestamp.$i.log 2>&1
     ) &
-    pids+=($!)
+    pids="$pids $!"
 done
-
-sleep $((RANDOM % 10 + 5))
+random_number=$(awk 'BEGIN{srand();print int(rand()*10)}')
+sleep $((random_number + 5))
 
 # Randomly select a PID to kill
-RANDOM_INDEX=$((RANDOM % 8))
-PID_TO_KILL=${pids[RANDOM_INDEX]}
+RANDOM_INDEX=$(awk 'BEGIN{srand();print int(rand()*8)}')
+counter=0
+for pid in $pids; do
+    if [ "$counter" -eq "$RANDOM_INDEX" ]; then
+        PID_TO_KILL=$pid
+        break
+    fi
+    counter=$((counter + 1))
+done
 
 kill $PID_TO_KILL
 echo "# Killed process with PID: $PID_TO_KILL"
 
 any_failure=0
-for pid in "${pids[@]}"; do
+for pid in $pids; do
     wait "$pid"
     status=$?
     if [ "$pid" != "$PID_TO_KILL" ]; then
-        if [[ $status -ne 0 ]]; then
+        if [ $status -ne 0 ]; then
 	    echo "# Process $pid returned failure."
             any_failure=1
         fi
     fi
 done
 
-if [[ $any_failure -ne 0 ]]; then
+if [ $any_failure -ne 0 ]; then
     echo "# Failed on random killing, at least one test fails."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 fi
 echo "# PASSED LARGER limit test with a process randomly killed."
 
-cgcreate -g memory:$TEST_CG_SUB2
+mkdir -p $CG_MEM_ROOT/$TEST_CG_SUB2
 if [ $? -ne 0 ]; then
     echo "# Failed creating memory controller."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     exit 1
 fi
 MEM_LIMIT_TOO_SMALL=$((CAPACITY - 2 * LARGE))
 
-if [[ $CG_V1 -eq 0 ]]; then
+if [ $CG_V1 -eq 0 ]; then
     echo "$MEM_LIMIT_TOO_SMALL" > $CG_MEM_ROOT/$TEST_CG_SUB2/memory.max
 else
     echo "$MEM_LIMIT_TOO_SMALL" > $CG_MEM_ROOT/$TEST_CG_SUB2/memory.limit_in_bytes
@@ -210,20 +243,20 @@  fi
 
 echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests with LARGE EPC limit,
         and too small RAM limit, expecting all failures...."
-pids=()
-for i in {1..4}; do
+pids=""
+for i in 1 2 3 4; do
     (
-        cgexec -g memory:$TEST_CG_SUB2 -g misc:$TEST_CG_SUB2 $test_cmd \
+        ./ash_cgexec.sh -g memory:$TEST_CG_SUB2 -g misc:$TEST_CG_SUB2 $test_cmd \
                >cgtest_large_oom_$timestamp.$i.log 2>&1
     ) &
-    pids+=($!)
+    pids="$pids $!"
 done
 
-if wait_and_detect_for_any 1 "${pids[@]}"; then
+if wait_and_detect_for_any 1 "$pids"; then
     echo "# Failed on tests with memcontrol, some tests did not fail."
-    cgdelete -r -g misc:$TEST_ROOT_CG
+    clean_up_misc
     if [[ $CG_V1 -ne 0 ]]; then
-        cgdelete -r -g memory:$TEST_ROOT_CG
+        rmdir $CG_MEM_ROOT/$TEST_CG_SUB2
     fi
     exit 1
 else
@@ -239,8 +272,8 @@  else
     echo "# PASSED leakage check."
     echo "# PASSED ALL cgroup limit tests, cleanup cgroups..."
 fi
-cgdelete -r -g misc:$TEST_ROOT_CG
-if [[ $CG_V1 -ne 0 ]]; then
-     cgdelete -r -g memory:$TEST_ROOT_CG
+clean_up_misc
+if [ $CG_V1 -ne 0 ]; then
+     rmdir $CG_MEM_ROOT/$TEST_CG_SUB2
 fi
 echo "# done."
diff --git a/tools/testing/selftests/sgx/watch_misc_for_tests.sh b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
index dbd38f346e7b..3b05475938d0 100755
--- a/tools/testing/selftests/sgx/watch_misc_for_tests.sh
+++ b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
@@ -1,13 +1,10 @@ 
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
+##!/usr/bin/env sh
+#!/bin/sh
 # Copyright(c) 2023 Intel Corporation.
 
-if [ -z "$1" ]
-  then
-    echo "No argument supplied, please provide 'max', 'current' or 'events'"
+if [ -z "$1" ]; then
+    echo "No argument supplied, please provide 'max', 'current', or 'events'"
     exit 1
 fi
 
-watch -n 1 "find /sys/fs/cgroup -wholename */test*/misc.$1 -exec sh -c \
-    'echo \"\$1:\"; cat \"\$1\"' _ {} \;"
-
+watch -n 1 'find /sys/fs/cgroup -wholename "*/test*/misc.'$1'" -exec sh -c '\''echo "$1:"; cat "$1"'\'' _ {} \;'