Show patches with: Submitter = Govindraj.R       |   168 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v4,11/11] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART - - - --- 2011-09-07 Govindraj.R New
[v4,10/11] OMAP: Serial: Allow UART parameters to be configured from board file. - - - --- 2011-09-07 Govindraj.R New
[v4,09/11] OMAP2+: Serial: Use prepare and resume calls to gate uart clocks - - - --- 2011-09-07 Govindraj.R New
[v4,08/11] Serial: OMAP2+: Move erratum handling from serial.c - - - --- 2011-09-07 Govindraj.R New
[v4,07/11] Serial: OMAP: Add runtime pm support for omap-serial driver - - - --- 2011-09-07 Govindraj.R New
[v4,06/11] Serial: OMAP: Store certain reg values to port structure - - - --- 2011-09-07 Govindraj.R New
[v4,05/11] OMAP2+: Serial: Add default mux for all uarts. - - - --- 2011-09-07 Govindraj.R New
[v4,04/11] OMAP2+: UART: Remove uart clock handling code from serial.c - - - --- 2011-09-07 Govindraj.R New
[v4,03/11] OMAP2+: UART: cleanup + remove certain uart calls from pm code - - - --- 2011-09-07 Govindraj.R New
[v4,02/11] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-09-07 Govindraj.R New
[v4,01/11] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-09-07 Govindraj.R New
[REPOST,2/2,v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-07-04 Govindraj.R New
[REPOST,2/2,v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-07-04 Govindraj.R New
[REPOST,1/2,v4] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-07-04 Govindraj.R New
[2/2,v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-07-02 Govindraj.R New
[1/2,v4] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-07-02 Govindraj.R New
[v3,12/12] OMAP4: Serial: Set TX_FIFO_THRESHOLD if uart in dma mode for es2.0 - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,07/12] OMAP: Serial: Allow UART parameters to be configured from board file. - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,06/12] Serial: OMAP2+: Move erratum handling from serial.c - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,05/12] OMAP: Serial: Hold console lock for console usage. - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,03/12] OMAP2+: Serial: Add default mux for all uarts. - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[v3,02/12] OMAP2+: UART: Remove uart clock handling code from serial.c - - - --- 2011-06-08 Govindraj.R khilman Changes Requested
[2/3] OMAP2+: fix compilation warnings. - - - --- 2011-06-01 Govindraj.R New
[1/3] OMAP2+: Fix debug section mistmatch warnings - - - --- 2011-06-01 Govindraj.R New
[2/2,v3] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-05-10 Govindraj.R New
[1/2,v3] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-05-10 Govindraj.R New
[2/2,v2] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-05-09 Govindraj.R New
[1/2,v2] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-05-09 Govindraj.R New
[2/2] OMAP2+: hwmod: Add API to check IO PAD wakeup status - - - --- 2011-05-06 Govindraj.R New
[1/2] OMAP2+: hwmod: Add API to enable IO ring wakeup. - - - --- 2011-05-06 Govindraj.R New
[v2,12/12] OMAP2: Serial: Add no async wake flag. - - - --- 2011-04-29 Govindraj.R New
[v2,11/12] OMAP: Serial: Use resume call from prcm to enable uart - - - --- 2011-04-29 Govindraj.R New
[v2,10/12] OMAP2+: hwmod: Add api to enable io_ring wakeup. - - - --- 2011-04-29 Govindraj.R New
[v2,09/12] OMAP3: Serial: Remove uart pads from 3430 board file. - - - --- 2011-04-29 Govindraj.R New
[v2,08/12] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART - - - --- 2011-04-29 Govindraj.R New
[v2,07/12] OMAP: Serial: Allow UART parameters to be configured from board file - - - --- 2011-04-29 Govindraj.R New
[v2,06/12] Serial: OMAP2+: Move erratum handling from serial.c - - - --- 2011-04-29 Govindraj.R New
[v2,05/12] OMAP: Serial: Hold console lock for console usage. - - - --- 2011-04-29 Govindraj.R New
[v2,04/12] Serial: OMAP: Add runtime pm support for omap-serial driver - - - --- 2011-04-29 Govindraj.R New
[v2,03/12] OMAP2+: Serial: Add default mux for all uarts. - - - --- 2011-04-29 Govindraj.R New
[v2,02/12] OMAP2+: UART: Remove uart clock handling code from serial.c - - - --- 2011-04-29 Govindraj.R New
[v2,01/12] OMAP2+: UART: Remove certain uart calls from sram_idle - - - --- 2011-04-29 Govindraj.R New
[2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads - - - --- 2011-03-02 Govindraj.R tmlind Changes Requested
[7/7] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[6/7] OMAP: Serial: Allow UART parameters to be configured from board file - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[5/7] Serial: OMAP: add runtime pm support for omap-serial driver - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[4/7] OMAP2+: UART: Remove uart clock handling code serial.c - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[3/7] OMAP2+: UART: Remove certain uart calls from sram_idle - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[2/7] OMAP2+: mux: Enable wakeup for wakeup enable requested pads - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[1/7] OMAP2+ : hwmod_data: update uart hwmod data. - - - --- 2011-02-28 Govindraj.R tmlind Changes Requested
[v6,6/6] OMAP: runtime: McSPI driver runtime conversion - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v6,5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v6,4/6] OMAP4: hwmod data: Add McSPI - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v6,3/6] OMAP3: hwmod data: Add McSPI - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v6,2/6] OMAP2430: hwmod data: Add McSPI - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v6,1/6] OMAP2420: hwmod data: Add McSPI - - - --- 2011-02-02 Govindraj.R tmlind Accepted
[v5,6/6] OMAP: runtime: McSPI driver runtime conversion - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v5,5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v5,4/6] OMAP4: hwmod data: Add McSPI - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v5,3/6] OMAP3: hwmod data: Add McSPI - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v5,2/6] OMAP2430: hwmod data: Add McSPI - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v5,1/6] OMAP2420: hwmod data: Add McSPI - - - --- 2011-01-21 Govindraj.R tmlind Superseded
[v4,6/6] OMAP: runtime: McSPI driver runtime conversion - - - --- 2011-01-18 Govindraj.R Superseded
[v4,5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework - - - --- 2011-01-18 Govindraj.R Superseded
[v4,4/6] OMAP4: hwmod data: Add McSPI - - - --- 2011-01-18 Govindraj.R Superseded
[v4,3/6] OMAP3: hwmod data: Add McSPI - - - --- 2011-01-18 Govindraj.R Superseded
[v4,2/6] OMAP2430: hwmod data: Add McSPI - - - --- 2011-01-18 Govindraj.R Superseded
[v4,1/6] OMAP2420: hwmod data: Add McSPI - - - --- 2011-01-18 Govindraj.R Superseded
[v3,6/6] OMAP: runtime: McSPI driver runtime conversion - - - --- 2011-01-17 Govindraj.R tmlind Superseded
[v3,5/6] OMAP: devices: Modify McSPI device to adapt to hwmod framework - - - --- 2011-01-17 Govindraj.R tmlind Superseded
[v3,4/6] OMAP4: hwmod data: Add McSPI - - - --- 2011-01-17 Govindraj.R tmlind Superseded
[v3,3/6] OMAP3: hwmod data: Add McSPI - - - --- 2011-01-17 Govindraj.R tmlind Superseded
[v3,2/6] OMAP2430: hwmod data: Add McSPI - - - --- 2011-01-17 Govindraj.R tmlind Superseded
[v3,1/6] OMAP2420: hwmod data: Add McSPI - - - --- 2011-01-17 Govindraj.R tmlind Superseded
OMAP3: clocks: Update clock domain name for mcspi fck - - - --- 2010-12-17 Govindraj.R pwsan New
[7/7,v2] OMAP: runtime: McSPI driver runtime conversion - - - --- 2010-12-01 Govindraj.R pwsan New
[6/7,v2] OMAP: devices: Modify McSPI device to adapt to hwmod framework - - - --- 2010-12-01 Govindraj.R pwsan New
[5/7,v2] OMAP3: clocks: Update clock domain name for mcspi fck - - - --- 2010-12-01 Govindraj.R pwsan New
[4/7,v2] OMAP4: hwmod data: Add McSPI - - - --- 2010-12-01 Govindraj.R pwsan New
[3/7,v2] OMAP3: hwmod data: Add McSPI - - - --- 2010-12-01 Govindraj.R pwsan New
[2/7,v2] OMAP2430: hwmod data: Add McSPI - - - --- 2010-12-01 Govindraj.R pwsan New
[1/7,v2] OMAP2420: hwmod data: Add McSPI - - - --- 2010-12-01 Govindraj.R pwsan New
[13/13,v3] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards - - - --- 2010-09-27 Govindraj.R khilman Accepted
[12/13,v3] OMAP: SERIAL: Enable omap-serial driver in Kconfig - - - --- 2010-09-27 Govindraj.R khilman Accepted
[11/13,v3] serial: Add OMAP high-speed UART driver - - - --- 2010-09-27 Govindraj.R khilman Accepted
[10/13,v3] OMAP3: serial: Fix uart4 handling for 3630 - - - --- 2010-09-27 Govindraj.R khilman Accepted
[09/13,v3] OMAP3: PM: Add prepare idle and resume idle call for uart4 - - - --- 2010-09-27 Govindraj.R khilman Accepted
[08/13,v3] OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs - - - --- 2010-09-27 Govindraj.R khilman Accepted
[07/13,v3] OMAP clock: Add uart4_ick/fck definitions for 3630 - - - --- 2010-09-27 Govindraj.R khilman Accepted
[06/13,v3] OMAP: UART: use non-locking versions of hwmod enable/idle functions - - - --- 2010-09-27 Govindraj.R khilman Accepted
[05/13,v3] OMAP: UART: don't do automatic bus-level suspend/resume - - - --- 2010-09-27 Govindraj.R khilman Accepted
[04/13,v3] OMAP2: UART: remove set_uart_globals - - - --- 2010-09-27 Govindraj.R khilman Accepted
[03/13,v3] OMAP: UART: omap_device converions, remove implicit 8520 assumptions - - - --- 2010-09-27 Govindraj.R khilman Accepted
[02/13,v3] OMAP2/3: UART: add omap_hwmod data for UARTs 1-4 - - - --- 2010-09-27 Govindraj.R khilman Accepted
[01/13,v3] OMAP4: UART: Add uart1-4 hwmods data for omap4 - - - --- 2010-09-27 Govindraj.R khilman Accepted
[13/13,v2] OMAP3: SERIAL: Initialize all omap-uarts for zoom boards - - - --- 2010-09-22 Govindraj.R khilman Superseded
[12/13,v2] OMAP: SERIAL: Enable omap-serial driver in Kconfig - - - --- 2010-09-22 Govindraj.R khilman Superseded
[11/13,v2] serial: Add OMAP high-speed UART driver - - - --- 2010-09-22 Govindraj.R khilman Superseded
[10/13,v2] OMAP3: serial: Fix uart4 handling for 3630 - - - --- 2010-09-22 Govindraj.R khilman Superseded
« 1 2 »