| [RESEND,1/2] usb: musb: fix the possible panic while resuming |
2009-02-26 |
kim kyuwon |
felipebalbi |
Under Review |
| OMAP3: PM: Add the wakeup source driver, v4 |
2009-05-05 |
kim kyuwon |
khilman |
Under Review |
| OMAP3: PM: Force USB to standby if not used |
2009-05-14 |
Tero Kristo |
felipebalbi |
New |
| usb: disable OTG AUTOIDLE only with omap3430 |
2009-05-18 |
Niilo Minkkinen |
felipebalbi |
New |
| [v2] usb: musb: Warn and check for OTG transceiver misconfiguration |
2009-06-29 |
Roger Quadros |
felipebalbi |
New |
| musb: cleanup the nop registration for OMAP3EVM |
2009-07-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [RFC] OMAP3: PM: Fix workaround implementation for OMAP3 errata (1.142) |
2009-07-29 |
Roger Quadros |
khilman |
New |
| OMAP3: PM : Set DSP frequency corresponding to mpurate |
2009-08-10 |
Sanjeev Premi |
khilman |
New |
| [1/1] OMAP clock: use debugfs_remove_recursive() for rewinding |
2009-08-16 |
Hiroshi DOYU |
pwsan |
New |
| usb: disable OTG AUTOIDLE only with omap3430 |
2009-08-26 |
Ajay Kumar Gupta |
felipebalbi |
New |
| musb: fix ISOC Tx programming for CPPI DMAs |
2009-08-28 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [V2] OMAP3: PM: Fix for MPU power domain MEM BANK position |
2009-08-28 |
Thara Gopinath |
khilman |
New |
| musb: Add context save and restore support |
2009-09-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/3] USB: musb: All each platform to have power hooks |
2009-09-04 |
vikram pandita |
felipebalbi |
New |
| [2/3] USB: musb: omap: Fix wrong xceivr passing to twl4030 |
2009-09-04 |
vikram pandita |
felipebalbi |
New |
| [3/3] USB: musb: omap: Enable MUSB clocks before xceiver resume |
2009-09-04 |
vikram pandita |
felipebalbi |
New |
| [1/3] USB: musb: All each platform to have power hooks |
2009-09-05 |
Dasgupta, Romit |
felipebalbi |
New |
| [v2] rtc: make rtc-omap driver ioremap its register space |
2009-09-17 |
Mark A. Greer |
khilman |
New |
| video: omap2: dss: RET on idle, enable/disable dss clocks only when needed. |
2009-09-17 |
Mike Chan |
khilman |
New |
| OMAP: timekeeping: time should not stop during suspend |
2009-09-24 |
Kevin Hilman |
khilman |
New |
| OMAP3: DVFS: No sdrc AC timing changes during core dvfs |
2009-10-06 |
Nayak, Rajendra |
pwsan |
New |
| [v2] OMAP3:PM: introduce enabled flag to omap_opp |
2009-10-09 |
Menon, Nishanth |
khilman |
New |
| OMAP3: GPIO: Added dynamic control logic for pad wakeups |
2009-10-16 |
Tero Kristo |
khilman |
New |
| [2/2] OMAP3:clk: introduce DPLL4 jtype support |
2009-10-20 |
Menon, Nishanth |
pwsan |
New |
| [2/2,v2] OMAP3:clk - introduce DPLL4 jtype support |
2009-10-20 |
Menon, Nishanth |
pwsan |
New |
| [v2,1/2] omap: add bits for future 3430/3630 ES revisions |
2009-10-20 |
vikram pandita |
pwsan |
New |
| [1/2,v3] OMAP3: PM: SR: prepare: remove old SR code |
2009-10-24 |
Menon, Nishanth |
khilman |
New |
| [2/2,v3] OMAP3: PM: SR: SmartReflex Refactor Rev4.0 |
2009-10-24 |
Menon, Nishanth |
khilman |
New |
| [1/2] OMAP3: PM: Check BM for C2 state |
2009-10-26 |
Tero Kristo |
khilman |
New |
| OMAP3: Clock: Fixed dpll3_m2x2 rate calculation |
2009-10-28 |
Tero Kristo |
pwsan |
New |
| [1/2] musb: Inform user when gadget cable is disconnected |
2009-11-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/2] musb: Remove unwanted message in boot log |
2009-11-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| AM35xx: Add AM35xx specific control module registers |
2009-11-03 |
Ranjith Lohithakshan |
pwsan |
New |
| [v2,1/2] Input: add new keycodes useful in mobile devices |
2009-11-04 |
Jani Nikula |
tmlind |
New |
| [v2,2/2] ARM OMAP3: RX-51 board: add initialization of gpio keys |
2009-11-04 |
Jani Nikula |
tmlind |
New |
| [RFC] OMAP3: PM: twl4030 keypad wakeup with off mode |
2009-11-06 |
Sanjeev Premi |
khilman |
New |
| [1/4] OMAP3: PM: Add suspend-resume to TWL4030 keypad |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [2/4] OMAP3: PM: T2 keypad: Add board specific suspend-resume functions |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [3/4] OMAP3: PM: Wakeup from T2 keypad with OFF mode |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [4/4] OMAP3: PM: Extend T2 wakeup support to 3430SDP |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [1/5] OMAP3: Fixed ARM aux ctrl register save/restore |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [3/5] OMAP3: PM: Added support for L2 aux ctrl register save and restore |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [PATCHv3,1/3] OMAP UART: Add omap-serial driver support. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,2/3] OMAP UART: Add platform data for omap-serial driver. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,3/3] OMAP UART: Add omap-serial driver support in omap_3430sdp_defconfig. |
2009-11-13 |
Govindraj.R |
|
New |
| [v2] omap3: Change the default silicon |
2009-11-13 |
Sanjeev Premi |
tmlind |
New |
| [1/7] musb: Add structure to get board specific data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/7] musb: Get power (mA) from board data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/7] musb: Update musb_init() call for all OMAP3 boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/7] musb: Update setup_usb() call for all Davinci boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/7] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/7] musb: set 'extvbus' default value to zero |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [7/7] musb: set 'extvbus' for OMAP3EVM Rev >=E |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [v2] AM35xx: Clock table updates for AM3505/17 |
2009-11-17 |
Ranjith Lohithakshan |
pwsan |
New |
| OMAP3515 vs 3525 inversion |
2009-11-17 |
Sanjeev Premi |
tmlind |
New |
| [1/8] musb: Add structure to get board specific data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/8] musb: Get power (mA) from board data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/8] musb: Update musb_init() call for all OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/8] musb: Update setup_usb() call for all Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/8] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/8] musb: set 'extvbus = 0' for OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [7/8] musb: set 'extvbus = 0' for Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [8/8] musb: set 'extvbus = 0' for Blackfin boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards |
2009-11-17 |
manjugk manjugk |
tmlind |
New |
| OMAP3: PM: Force write last pad config register into save area |
2009-11-17 |
Tero Kristo |
khilman |
New |
| [v2] OMAP: timekeeping: time should not stop during suspend |
2009-11-17 |
Kevin Hilman |
|
New |
| ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2 |
2009-11-18 |
Reddy, Teerth |
tmlind |
New |
| omap3: zoom2/3: make MMC slot work again |
2009-11-18 |
Anand Gadiyar |
tmlind |
New |
| [1/4] OMAP3: introduce DPLL4 Jtype |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [2/4] OMAP3: Clock Type change for OMAP3 Clocks |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [4/4] OMAP3: add support for 192Mhz sgx clock |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [05/12] omap3evm: Add board revision function, v2 |
2009-11-18 |
Tony Lindgren |
|
New |
| [2/8] AI TB: Board file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [4/8] AI TB: Driver for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [7/8] AI TB: Video driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [8/8] AI TB: Additional files for Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [1/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [2/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [PATCH-v6,1/4] OMAP2/3: Add support for flash on SDP boards |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,2/4] OMAP3: Add support for NAND on ZOOM/LDP boards |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,4/4] OMAP: 3430SDP: Enable NAND in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [1/3] Mux configuration for AM3517 TouchScreen support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [2/3] Input:TouchScreen: Introduce TSC2004 driver support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [3/3] AM3517: Add support for TSC2004 driver |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [1/2] ARM: Implemented support for VFP PM context saving |
2009-11-19 |
Tero Kristo |
|
New |
| [2/2] OMAP3: Implemented VFP restore/save context |
2009-11-19 |
Tero Kristo |
|
New |
