| [OMAP1] use gen_nand |
2009-11-23 |
Ladislav.Michl@seznam.cz |
|
New |
| [3/3,OMAP] HTCHERALD: Add USB configuration to HTC Herald |
2009-11-22 |
Cory Maccarrone |
|
New |
| [2/3,OMAP] USB: Add omap7xx-specific pin muxing |
2009-11-22 |
Cory Maccarrone |
|
New |
| [1/3,OMAP1] MUX: Add omap7xx-specific USB mux pins |
2009-11-22 |
Cory Maccarrone |
|
New |
| [v3] mmc-omap: Add support for 16-bit and 32-bit registers |
2009-11-22 |
Cory Maccarrone |
|
New |
| [v2] mmc-omap: Add support for 16-bit and 32-bit registers |
2009-11-22 |
Cory Maccarrone |
|
New |
| NULL pointer dereference with 2.6.31 on OMAP243 |
2009-11-22 |
Tony Lindgren |
|
New |
| [RFC] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set) |
2009-11-21 |
Janusz Krzysztofik |
|
New |
| [v3,2/2] omap: serial: fix non-empty uart fifo read abort |
2009-11-20 |
vikram pandita |
|
New |
| [v3,1/2] omap: introduce uart_no_empty_fifo_read feature |
2009-11-20 |
vikram pandita |
|
New |
| [PATCHV2,4/4] OMAP3: add support for 192Mhz sgx clock |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,3/4] OMAP3: Correct width for CLKSEL Fields |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,2/4] OMAP3: Clock Type change for OMAP3 Clocks |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,1/4] OMAP3: introduce DPLL4 Jtype |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [5/5] ZOOM3: DSS2: zoom3 defconfig changes to enable dss2 |
2009-11-20 |
Y, Kishore |
|
New |
| [4/5] ZOOM2: DSS2: zoom2 defconfig changes to enable dss2 |
2009-11-20 |
Y, Kishore |
|
New |
| [3/5] ZOOM: DSS2: Mux changes to enable zoom display |
2009-11-20 |
Y, Kishore |
|
New |
| [2/5] ZOOM: DSS2: Add nec panel for zoom display |
2009-11-20 |
Y, Kishore |
|
New |
| [1/5] ZOOM: DSS2: changes in zoom board file for display support |
2009-11-20 |
Y, Kishore |
|
New |
| USB: twl4030: Enable USB regulators before enabling USB charging |
2009-11-19 |
Aguilar Pena, Leed |
|
New |
| [8/8] Additional file for Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [7/8] Video driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [6/8] Audio driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [5/8] HID file for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [4/8] Driver for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [3/8] Freescale MMA7455 accelerometer driver |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/8] Board file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [1/8] defconfig file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/2] OMAP3: Implemented VFP restore/save context |
2009-11-19 |
Tero Kristo |
|
New |
| [1/2] ARM: Implemented support for VFP PM context saving |
2009-11-19 |
Tero Kristo |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [3/3] AM3517: Add support for TSC2004 driver |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [2/3] Input:TouchScreen: Introduce TSC2004 driver support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [1/3] Mux configuration for AM3517 TouchScreen support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [PATCH-v6,4/4] OMAP: 3430SDP: Enable NAND in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,2/4] OMAP3: Add support for NAND on ZOOM/LDP boards |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,1/4] OMAP2/3: Add support for flash on SDP boards |
2009-11-19 |
vimal singh |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [2/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [1/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [8/8] AI TB: Additional files for Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [7/8] AI TB: Video driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [4/8] AI TB: Driver for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/8] AI TB: Board file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [05/12] omap3evm: Add board revision function, v2 |
2009-11-18 |
Tony Lindgren |
|
New |
| [4/4] OMAP3: add support for 192Mhz sgx clock |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [2/4] OMAP3: Clock Type change for OMAP3 Clocks |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [1/4] OMAP3: introduce DPLL4 Jtype |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| omap3: zoom2/3: make MMC slot work again |
2009-11-18 |
Anand Gadiyar |
tmlind |
New |
| ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2 |
2009-11-18 |
Reddy, Teerth |
tmlind |
New |
| [v2] OMAP: timekeeping: time should not stop during suspend |
2009-11-17 |
Kevin Hilman |
|
New |
| OMAP3: PM: Force write last pad config register into save area |
2009-11-17 |
Tero Kristo |
khilman |
New |
| OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards |
2009-11-17 |
manjugk manjugk |
tmlind |
New |
| [8/8] musb: set 'extvbus = 0' for Blackfin boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [7/8] musb: set 'extvbus = 0' for Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/8] musb: set 'extvbus = 0' for OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/8] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/8] musb: Update setup_usb() call for all Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/8] musb: Update musb_init() call for all OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/8] musb: Get power (mA) from board data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/8] musb: Add structure to get board specific data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| OMAP3515 vs 3525 inversion |
2009-11-17 |
Sanjeev Premi |
tmlind |
New |
| [v2] AM35xx: Clock table updates for AM3505/17 |
2009-11-17 |
Ranjith Lohithakshan |
pwsan |
New |
| [7/7] musb: set 'extvbus' for OMAP3EVM Rev >=E |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/7] musb: set 'extvbus' default value to zero |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/7] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/7] musb: Update setup_usb() call for all Davinci boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/7] musb: Update musb_init() call for all OMAP3 boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/7] musb: Get power (mA) from board data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/7] musb: Add structure to get board specific data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [v2] omap3: Change the default silicon |
2009-11-13 |
Sanjeev Premi |
tmlind |
New |
| [PATCHv3,3/3] OMAP UART: Add omap-serial driver support in omap_3430sdp_defconfig. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,2/3] OMAP UART: Add platform data for omap-serial driver. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,1/3] OMAP UART: Add omap-serial driver support. |
2009-11-13 |
Govindraj.R |
|
New |
| [6/6] OMAP3: CPUidle: Added peripheral pwrdm checks into bm check |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [5/6] OMAP: Powerdomains: Add support for checking if pwrdm can idle |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [4/6] OMAP3: PM: Removed PER + CORE state hacking from omap_sram_idle |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [3/6] OMAP3: CPUidle: Fixed support for ON / INACTIVE states |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [2/6] OMAP3: PM: Added support for INACTIVE and ON states for powerdomains |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [1/6] OMAP: Powerdomains: Add support for INACTIVE state on pwrdm level |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [5/5] OMAP3: PM: Disable OTG autoidle when waking up from off-mode |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [4/5] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [3/5] OMAP3: PM: Added support for L2 aux ctrl register save and restore |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [2/5] OMAP3: PM: Disabled I2C4 repeated start operation mode |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [1/5] OMAP3: Fixed ARM aux ctrl register save/restore |
2009-11-12 |
Tero Kristo |
khilman |
New |
| [4/4] OMAP3: PM: Extend T2 wakeup support to 3430SDP |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [3/4] OMAP3: PM: Wakeup from T2 keypad with OFF mode |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [2/4] OMAP3: PM: T2 keypad: Add board specific suspend-resume functions |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [1/4] OMAP3: PM: Add suspend-resume to TWL4030 keypad |
2009-11-09 |
Sanjeev Premi |
khilman |
New |
| [RFC] OMAP3: PM: twl4030 keypad wakeup with off mode |
2009-11-06 |
Sanjeev Premi |
khilman |
New |
| [v2,2/2] ARM OMAP3: RX-51 board: add initialization of gpio keys |
2009-11-04 |
Jani Nikula |
tmlind |
New |
| [v2,1/2] Input: add new keycodes useful in mobile devices |
2009-11-04 |
Jani Nikula |
tmlind |
New |
| AM35xx: Add AM35xx specific control module registers |
2009-11-03 |
Ranjith Lohithakshan |
pwsan |
New |
| [2/2] musb: Remove unwanted message in boot log |
2009-11-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/2] musb: Inform user when gadget cable is disconnected |
2009-11-03 |
Ajay Kumar Gupta |
felipebalbi |
New |
| OMAP3: Clock: Fixed dpll3_m2x2 rate calculation |
2009-10-28 |
Tero Kristo |
pwsan |
New |
| [1/2] OMAP3: PM: Check BM for C2 state |
2009-10-26 |
Tero Kristo |
khilman |
New |
