| omap3: sr: Update ON voltage levels based on VSEL |
2009-11-23 |
Sanjeev Premi |
|
New |
| [OMAP1] use gen_nand |
2009-11-23 |
Ladislav.Michl@seznam.cz |
|
New |
| [3/3,OMAP] HTCHERALD: Add USB configuration to HTC Herald |
2009-11-22 |
Cory Maccarrone |
|
New |
| [2/3,OMAP] USB: Add omap7xx-specific pin muxing |
2009-11-22 |
Cory Maccarrone |
|
New |
| [1/3,OMAP1] MUX: Add omap7xx-specific USB mux pins |
2009-11-22 |
Cory Maccarrone |
|
New |
| [v3] mmc-omap: Add support for 16-bit and 32-bit registers |
2009-11-22 |
Cory Maccarrone |
|
New |
| [v2] mmc-omap: Add support for 16-bit and 32-bit registers |
2009-11-22 |
Cory Maccarrone |
|
New |
| NULL pointer dereference with 2.6.31 on OMAP243 |
2009-11-22 |
Tony Lindgren |
|
New |
| [RFC] OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1 (Re: [PATCH] OMAP1: PM: Fix omapfb/lcd on Amstrad Delta broken when PM set) |
2009-11-21 |
Janusz Krzysztofik |
|
New |
| [v3,2/2] omap: serial: fix non-empty uart fifo read abort |
2009-11-20 |
vikram pandita |
|
New |
| [v3,1/2] omap: introduce uart_no_empty_fifo_read feature |
2009-11-20 |
vikram pandita |
|
New |
| [PATCHV2,4/4] OMAP3: add support for 192Mhz sgx clock |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,3/4] OMAP3: Correct width for CLKSEL Fields |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,2/4] OMAP3: Clock Type change for OMAP3 Clocks |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [PATCHV2,1/4] OMAP3: introduce DPLL4 Jtype |
2009-11-20 |
Sripathy, Vishwanath |
|
New |
| [5/5] ZOOM3: DSS2: zoom3 defconfig changes to enable dss2 |
2009-11-20 |
Y, Kishore |
|
New |
| [4/5] ZOOM2: DSS2: zoom2 defconfig changes to enable dss2 |
2009-11-20 |
Y, Kishore |
|
New |
| [3/5] ZOOM: DSS2: Mux changes to enable zoom display |
2009-11-20 |
Y, Kishore |
|
New |
| [2/5] ZOOM: DSS2: Add nec panel for zoom display |
2009-11-20 |
Y, Kishore |
|
New |
| [1/5] ZOOM: DSS2: changes in zoom board file for display support |
2009-11-20 |
Y, Kishore |
|
New |
| USB: twl4030: Enable USB regulators before enabling USB charging |
2009-11-19 |
Aguilar Pena, Leed |
|
New |
| [8/8] Additional file for Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [7/8] Video driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [6/8] Audio driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [5/8] HID file for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [4/8] Driver for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [3/8] Freescale MMA7455 accelerometer driver |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/8] Board file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [1/8] defconfig file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/2] OMAP3: Implemented VFP restore/save context |
2009-11-19 |
Tero Kristo |
|
New |
| [1/2] ARM: Implemented support for VFP PM context saving |
2009-11-19 |
Tero Kristo |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [3/3] AM3517: Add support for TSC2004 driver |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [2/3] Input:TouchScreen: Introduce TSC2004 driver support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [1/3] Mux configuration for AM3517 TouchScreen support |
2009-11-19 |
hvaibhav@ti.com |
|
New |
| [PATCH-v6,4/4] OMAP: 3430SDP: Enable NAND in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,2/4] OMAP3: Add support for NAND on ZOOM/LDP boards |
2009-11-19 |
vimal singh |
|
New |
| [PATCH-v6,1/4] OMAP2/3: Add support for flash on SDP boards |
2009-11-19 |
vimal singh |
|
New |
| [3/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [2/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [1/3] omap3: pm: removes hardcoded VDD1/2 OPP values and make threshold generic |
2009-11-19 |
G.N, Vijayakumar |
|
New |
| [8/8] AI TB: Additional files for Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [7/8] AI TB: Video driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [6/8] AI TB: Audio driver of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [5/8] AI TB: HID file for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [4/8] AI TB: Driver for Always Innovating OMAP3-based Touch Book keyboard |
2009-11-19 |
Gregoire Gentil |
|
New |
| [2/8] AI TB: Board file of Always Innovating OMAP3-based Touch Book |
2009-11-19 |
Gregoire Gentil |
|
New |
| [05/12] omap3evm: Add board revision function, v2 |
2009-11-18 |
Tony Lindgren |
|
New |
| [4/4] OMAP3: add support for 192Mhz sgx clock |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [2/4] OMAP3: Clock Type change for OMAP3 Clocks |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| [1/4] OMAP3: introduce DPLL4 Jtype |
2009-11-18 |
Sripathy, Vishwanath |
pwsan |
New |
| omap3: zoom2/3: make MMC slot work again |
2009-11-18 |
Anand Gadiyar |
tmlind |
New |
| ZOOM2: PM: Add T2 keypad as wakeup source for Zoom2 |
2009-11-18 |
Reddy, Teerth |
tmlind |
New |
| [v2] OMAP: timekeeping: time should not stop during suspend |
2009-11-17 |
Kevin Hilman |
|
New |
| OMAP3: PM: Force write last pad config register into save area |
2009-11-17 |
Tero Kristo |
khilman |
New |
| OMAP3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards |
2009-11-17 |
manjugk manjugk |
tmlind |
New |
| [v2] rx51: add wl1251 wlan driver support |
2009-11-17 |
Kalle Valo |
tmlind |
Accepted |
| [8/8] musb: set 'extvbus = 0' for Blackfin boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [7/8] musb: set 'extvbus = 0' for Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/8] musb: set 'extvbus = 0' for OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/8] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/8] musb: Update setup_usb() call for all Davinci boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/8] musb: Update musb_init() call for all OMAP3 boards |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/8] musb: Get power (mA) from board data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/8] musb: Add structure to get board specific data |
2009-11-17 |
Ajay Kumar Gupta |
felipebalbi |
New |
| OMAP3515 vs 3525 inversion |
2009-11-17 |
Sanjeev Premi |
tmlind |
New |
| [v2] AM35xx: Clock table updates for AM3505/17 |
2009-11-17 |
Ranjith Lohithakshan |
pwsan |
New |
| [v3,OMAP3_PM] Fix zoom2/zoom3 build error |
2009-11-16 |
manjugk manjugk |
khilman |
Accepted |
| [2/3] OMAP3: Clock: Fixed dpll3_m2x2 rate calculation |
2009-11-16 |
Paul Walmsley |
tmlind |
Accepted |
| [1/3] OMAP3 clock: Fix the DPLL freqsel computations |
2009-11-16 |
Paul Walmsley |
tmlind |
Accepted |
| [PATCHV3] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration |
2009-11-16 |
Sripathy, Vishwanath |
khilman |
Accepted |
| [7/7] musb: set 'extvbus' for OMAP3EVM Rev >=E |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [6/7] musb: set 'extvbus' default value to zero |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [5/7] musb: Add 'extvbus' in musb_hdrc_board_data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [4/7] musb: Update setup_usb() call for all Davinci boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/7] musb: Update musb_init() call for all OMAP3 boards |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [2/7] musb: Get power (mA) from board data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [1/7] musb: Add structure to get board specific data |
2009-11-15 |
Ajay Kumar Gupta |
felipebalbi |
New |
| [3/3] htcherald: Add default kernel configuration for Herald |
2009-11-14 |
Cory Maccarrone |
|
Accepted |
| [1/3,OMAP] htcherald: Add board support and LCD for HTC Herald |
2009-11-14 |
Cory Maccarrone |
|
Accepted |
| [v4] OMAP: GPIO module enable/disable |
2009-11-13 |
charu@ti.com |
tmlind |
Accepted |
| [2/2,(for-next)] ARM: OMAP3: Add defconfig for IGEP v2 board |
2009-11-13 |
Enric Balletbò i Serra |
tmlind |
Accepted |
| [1/2,(for-next)] ARM: OMAP3: Add support for the IGEP v2 board (rev B) |
2009-11-13 |
Enric Balletbò i Serra |
tmlind |
Accepted |
| [v2] omap3: Change the default silicon |
2009-11-13 |
Sanjeev Premi |
tmlind |
New |
| omap3evm: MIgrate to smsc911x ethernet driver. |
2009-11-13 |
Sriram |
tmlind |
Accepted |
| [PATCHv3,3/3] OMAP UART: Add omap-serial driver support in omap_3430sdp_defconfig. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,2/3] OMAP UART: Add platform data for omap-serial driver. |
2009-11-13 |
Govindraj.R |
|
New |
| [PATCHv3,1/3] OMAP UART: Add omap-serial driver support. |
2009-11-13 |
Govindraj.R |
|
New |
| [9/9,v2] omap3: pm: introduce 3630 opps |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [8/9,v2] omap3: pm: introduce dynamic OPP |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [7/9] omap3: pm: remove VDDx_MIN/MAX macros |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [6/9] omap3: clk: use pm accessor functions for cpufreq table |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [5/9] omap3: pm: sr: replace get_opp with freq_to_opp |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [4/9] omap3: pm: use opp accessor functions for omap-target |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [3/9] omap3: pm: srf: use opp accessor function |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [2/9,v2] omap3: pm: introduce opp accessor functions |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| [1/9] omap3: pm: introduce enabled flag to omap_opp |
2009-11-13 |
Menon, Nishanth |
khilman |
Changes Requested |
| OMAP3: keep SoC features on the same line |
2009-11-12 |
Kevin Hilman |
|
Accepted |
| [v3] omap3-iommu: reorganize |
2009-11-12 |
Felipe Contreras |
tmlind |
Accepted |
