diff mbox series

[3/3] arm64: dts: ti: k3-j7200: use ti,j7200-padconf compatible

Message ID 20231128-j7200-pinctrl-s2r-v1-3-704e7dc24460@bootlin.com (mailing list archive)
State New, archived
Headers show
Series pinctrl: pinctrl-single: fix suspend/resume on j7200 | expand

Commit Message

Thomas Richard Nov. 28, 2023, 3:35 p.m. UTC
For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
restore pinctrl contexts.

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi       |  8 ++++----
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 12 ++++++------
 2 files changed, 10 insertions(+), 10 deletions(-)

Comments

Tony Lindgren Nov. 29, 2023, 10:19 a.m. UTC | #1
* Thomas Richard <thomas.richard@bootlin.com> [231128 15:35]:
> For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
> restore pinctrl contexts.

Hmm are the mcu registers lost too? Anyways presumably you looked at it:

Reviewed-by: Tony Lindgren <tony@atomide.com>
Thomas Richard Nov. 29, 2023, 10:32 a.m. UTC | #2
On 11/29/23 11:19, Tony Lindgren wrote:
> * Thomas Richard <thomas.richard@bootlin.com> [231128 15:35]:
>> For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
>> restore pinctrl contexts.
> 
> Hmm are the mcu registers lost too? Anyways presumably you looked at it:

Hi Tony,

Thanks for the review.
Yes the mcu registers are lost too, as the SoC is fully powered-off.
And I did the test to confirm.

Regards,

> 
> Reviewed-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren Nov. 29, 2023, 10:37 a.m. UTC | #3
* Thomas Richard <thomas.richard@bootlin.com> [231129 10:32]:
> Thanks for the review.
> Yes the mcu registers are lost too, as the SoC is fully powered-off.
> And I did the test to confirm.

OK thanks for confirming it.

Tony
Linus Walleij Dec. 4, 2023, 9:53 a.m. UTC | #4
On Tue, Nov 28, 2023 at 4:35 PM Thomas Richard
<thomas.richard@bootlin.com> wrote:

> For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
> restore pinctrl contexts.
>
> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 1ea809e41500..709081cd1e7f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -395,7 +395,7 @@  cpts@3d000 {
 
 	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
 	main_timerio_input: pinctrl@104200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104200 0x0 0x50>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -404,7 +404,7 @@  main_timerio_input: pinctrl@104200 {
 
 	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
 	main_timerio_output: pinctrl@104280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x104280 0x0 0x20>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -412,7 +412,7 @@  main_timerio_output: pinctrl@104280 {
 	};
 
 	main_pmx0: pinctrl@11c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c000 0x00 0x10c>;
 		#pinctrl-cells = <1>;
@@ -421,7 +421,7 @@  main_pmx0: pinctrl@11c000 {
 	};
 
 	main_pmx1: pinctrl@11c11c {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x11c11c 0x00 0xc>;
 		#pinctrl-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 3fc588b848c6..467970fab3a0 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -185,7 +185,7 @@  chipid@43000014 {
 
 	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
 	mcu_timerio_input: pinctrl@40f04200 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04200 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -195,7 +195,7 @@  mcu_timerio_input: pinctrl@40f04200 {
 
 	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
 	mcu_timerio_output: pinctrl@40f04280 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		reg = <0x0 0x40f04280 0x0 0x28>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
@@ -204,7 +204,7 @@  mcu_timerio_output: pinctrl@40f04280 {
 	};
 
 	wkup_pmx0: pinctrl@4301c000 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c000 0x00 0x34>;
 		#pinctrl-cells = <1>;
@@ -213,7 +213,7 @@  wkup_pmx0: pinctrl@4301c000 {
 	};
 
 	wkup_pmx1: pinctrl@4301c038 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
 		#pinctrl-cells = <1>;
@@ -222,7 +222,7 @@  wkup_pmx1: pinctrl@4301c038 {
 	};
 
 	wkup_pmx2: pinctrl@4301c068 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
 		#pinctrl-cells = <1>;
@@ -231,7 +231,7 @@  wkup_pmx2: pinctrl@4301c068 {
 	};
 
 	wkup_pmx3: pinctrl@4301c174 {
-		compatible = "pinctrl-single";
+		compatible = "ti,j7200-padconf", "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;
 		#pinctrl-cells = <1>;