mbox series

[v9,0/5] TI K3 M4F support on AM62 SoCs

Message ID 20240426191811.32414-1-afd@ti.com (mailing list archive)
Headers show
Series TI K3 M4F support on AM62 SoCs | expand

Message

Andrew Davis April 26, 2024, 7:18 p.m. UTC
Hello all,

This is the continuation of the M4F RProc support series from here[0].
I'm helping out with the upstream task for Hari and so this version(v8)
is a little different than the previous(v7) postings[0]. Most notable
change I've introduced being the patches factoring out common support
from the current K3 R5 and DSP drivers have been dropped. I'd like
to do that re-factor *after* getting this driver in shape, that way
we have 3 similar drivers to factor out from vs trying to make those
changes in parallel with the series adding M4 support.

Anyway, details on our M4F subsystem can be found the
the AM62 TRM in the section on the same:

AM62x Technical Reference Manual (SPRUIV7A – MAY 2022)
https://www.ti.com/lit/pdf/SPRUIV7A

Thanks,
Andrew

[0] https://lore.kernel.org/linux-arm-kernel/20240202175538.1705-5-hnagalla@ti.com/T/

Changes for v9:
 - Fixed reserved-memory.yaml text in [1/5]
 - Split dts patch into one for SoC and one for board enable
 - Corrected DT property order and formatting [4/5][5/5]

Hari Nagalla (4):
  dt-bindings: remoteproc: k3-m4f: Add K3 AM64x SoCs
  arm64: dts: ti: k3-am62: Add M4F remoteproc node
  arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
  arm64: defconfig: Enable TI K3 M4 remoteproc driver

Martyn Welch (1):
  remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem

 .../bindings/remoteproc/ti,k3-m4f-rproc.yaml  | 125 +++
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi       |  13 +
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  19 +
 arch/arm64/configs/defconfig                  |   1 +
 drivers/remoteproc/Kconfig                    |  13 +
 drivers/remoteproc/Makefile                   |   1 +
 drivers/remoteproc/ti_k3_m4_remoteproc.c      | 785 ++++++++++++++++++
 7 files changed, 957 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
 create mode 100644 drivers/remoteproc/ti_k3_m4_remoteproc.c