diff mbox

mac80211: fix a NULL dereference in ath9k (and likely other drivers) when fixed mesh paths are used

Message ID 20150525161542.GA14318@localhost (mailing list archive)
State Not Applicable
Delegated to: Johannes Berg
Headers show

Commit Message

Bob Copeland May 25, 2015, 4:15 p.m. UTC
On Thu, May 21, 2015 at 06:05:13PM -0700, Alexis Green wrote:
> This patch fixes a NULL dereference in ath9k (and likely other drivers) when
> fixed mesh paths are used. The problem is that when a station comes up
> sta_info_alloc allocates ath_node implicitly via hw->sta_data_size. When it
> does that the ath_node is zeroed out. The ath_node isn’t actually initialized
> until the station becomes associated and ath9k_sta_state is called.

Good catch.

I wonder if we should instead remove the mesh special case in
ieee80211_tx_h_check_assoc() -- given that we require an assoc station in
peering before we send data frames to that RA, and userspace should also be
setting assoc flag after MPM completes, I can't think of a reason offhand why
we'd need to bail out there.

Does this also fix the problem for you?  It passed the wpa_supplicant test
cases at least (but we aren't fixing mpaths in any of those...)

From 246febaa51d555fda437cc8064798db06c5f4d6e Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Mon, 25 May 2015 12:01:52 -0400
Subject: [PATCH] mac80211: enable assoc check for mesh interfaces

We already set a station to be associated when peering completes,
both in user space and in the kernel.  Thus we should always have
an associated sta before sending data frames to that station.

Failure to do this can cause crashes in the lower-level driver due
to transmitting unicast data frames before driver sta structures
(e.g. ampdu state in ath9k) are initialized.  This could have
happened if fixing mpaths, which could then allow TX to stations
with whom we haven't yet completed peering.

Reported-by: Alexis Green <agreen@cococorp.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
---
 net/mac80211/tx.c | 3 ---
 1 file changed, 3 deletions(-)

Comments

Johannes Berg May 26, 2015, 1:27 p.m. UTC | #1
On Mon, 2015-05-25 at 12:15 -0400, Bob Copeland wrote:
> On Thu, May 21, 2015 at 06:05:13PM -0700, Alexis Green wrote:
> > This patch fixes a NULL dereference in ath9k (and likely other drivers) when
> > fixed mesh paths are used. The problem is that when a station comes up
> > sta_info_alloc allocates ath_node implicitly via hw->sta_data_size. When it
> > does that the ath_node is zeroed out. The ath_node isn’t actually initialized
> > until the station becomes associated and ath9k_sta_state is called.
> 
> Good catch.
> 
> I wonder if we should instead remove the mesh special case in
> ieee80211_tx_h_check_assoc() -- given that we require an assoc station in
> peering before we send data frames to that RA, and userspace should also be
> setting assoc flag after MPM completes, I can't think of a reason offhand why
> we'd need to bail out there.
> 
> Does this also fix the problem for you?  It passed the wpa_supplicant test
> cases at least (but we aren't fixing mpaths in any of those...)
> 
> From 246febaa51d555fda437cc8064798db06c5f4d6e Mon Sep 17 00:00:00 2001
> From: Bob Copeland <me@bobcopeland.com>
> Date: Mon, 25 May 2015 12:01:52 -0400
> Subject: [PATCH] mac80211: enable assoc check for mesh interfaces
> 
> We already set a station to be associated when peering completes,
> both in user space and in the kernel.  Thus we should always have
> an associated sta before sending data frames to that station.
> 
> Failure to do this can cause crashes in the lower-level driver due
> to transmitting unicast data frames before driver sta structures
> (e.g. ampdu state in ath9k) are initialized.  This could have
> happened if fixing mpaths, which could then allow TX to stations
> with whom we haven't yet completed peering.
> 
> Reported-by: Alexis Green <agreen@cococorp.com>
> Signed-off-by: Bob Copeland <me@bobcopeland.com>

This looks reasonable to me - Alexis?

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jesse Jones June 12, 2015, 6:01 p.m. UTC | #2
> -----Original Message-----
> From: Bob Copeland [mailto:me@bobcopeland.com]
> Sent: Monday, May 25, 2015 9:16 AM
> To: Alexis Green
> Cc: Johannes Berg; linux-wireless; Jesse Jones
> Subject: Re: [PATCH] mac80211: fix a NULL dereference in ath9k (and likely
> other drivers) when fixed mesh paths are used
>
> On Thu, May 21, 2015 at 06:05:13PM -0700, Alexis Green wrote:
> > This patch fixes a NULL dereference in ath9k (and likely other
> > drivers) when fixed mesh paths are used. The problem is that when a
> > station comes up sta_info_alloc allocates ath_node implicitly via
> > hw->sta_data_size. When it does that the ath_node is zeroed out. The
> > ath_node isn’t actually initialized until the station becomes associated
> > and
> ath9k_sta_state is called.
>
> Good catch.
>
> I wonder if we should instead remove the mesh special case in
> ieee80211_tx_h_check_assoc() -- given that we require an assoc station in
> peering before we send data frames to that RA, and userspace should also
> be setting assoc flag after MPM completes, I can't think of a reason
> offhand
> why we'd need to bail out there.
>
> Does this also fix the problem for you?  It passed the wpa_supplicant test
> cases at least (but we aren't fixing mpaths in any of those...)
>
> From 246febaa51d555fda437cc8064798db06c5f4d6e Mon Sep 17 00:00:00
> 2001
> From: Bob Copeland <me@bobcopeland.com>
> Date: Mon, 25 May 2015 12:01:52 -0400
> Subject: [PATCH] mac80211: enable assoc check for mesh interfaces
>
> We already set a station to be associated when peering completes, both in
> user space and in the kernel.  Thus we should always have an associated
> sta
> before sending data frames to that station.
>
> Failure to do this can cause crashes in the lower-level driver due to
> transmitting unicast data frames before driver sta structures (e.g. ampdu
> state in ath9k) are initialized.  This could have happened if fixing
> mpaths,
> which could then allow TX to stations with whom we haven't yet completed
> peering.
>
> Reported-by: Alexis Green <agreen@cococorp.com>
> Signed-off-by: Bob Copeland <me@bobcopeland.com>
> ---
>  net/mac80211/tx.c | 3 ---
>  1 file changed, 3 deletions(-)
>
> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index
> 667111ee6a20..5787f15a3a12 100644
> --- a/net/mac80211/tx.c
> +++ b/net/mac80211/tx.c
> @@ -301,9 +301,6 @@ ieee80211_tx_h_check_assoc(struct
> ieee80211_tx_data *tx)
>  	if (tx->sdata->vif.type == NL80211_IFTYPE_WDS)
>  		return TX_CONTINUE;
>
> -	if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
> -		return TX_CONTINUE;
> -
>  	if (tx->flags & IEEE80211_TX_PS_BUFFERED)
>  		return TX_CONTINUE;
>
> --
> 2.1.4
>
>
>
> --
> Bob Copeland %% http://bobcopeland.com/

Sorry for the delay in responding to this...

I had trouble reproing the reboot caused by ath9k de-referencing NULL
pointers but after a fair amount of work I was able to consistently get
reboots. Your patch *does* fix the problem so I am going to switch our repo
over to your patch instead of what we were using. Thanks for the help.

  -- Jesse
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Johannes Berg June 12, 2015, 8:10 p.m. UTC | #3
On Fri, 2015-06-12 at 11:01 -0700, Jesse Jones wrote:

> I had trouble reproing the reboot caused by ath9k de-referencing NULL
> pointers but after a fair amount of work I was able to consistently get
> reboots. Your patch *does* fix the problem so I am going to switch our repo
> over to your patch instead of what we were using. Thanks for the help.

Great. Bob, if it's no bother I'd appreciate if you'd resend the patch
correctly so it gets picked up by patchwork etc.

Thanks,
johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bob Copeland June 12, 2015, 10:33 p.m. UTC | #4
On Fri, Jun 12, 2015 at 10:10:32PM +0200, Johannes Berg wrote:
> On Fri, 2015-06-12 at 11:01 -0700, Jesse Jones wrote:
> 
> > I had trouble reproing the reboot caused by ath9k de-referencing NULL
> > pointers but after a fair amount of work I was able to consistently get
> > reboots. Your patch *does* fix the problem so I am going to switch our repo
> > over to your patch instead of what we were using. Thanks for the help.
> 
> Great. Bob, if it's no bother I'd appreciate if you'd resend the patch
> correctly so it gets picked up by patchwork etc.

Sure.  Jesse, want me to add your Tested-by?
diff mbox

Patch

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 667111ee6a20..5787f15a3a12 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -301,9 +301,6 @@  ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
 	if (tx->sdata->vif.type == NL80211_IFTYPE_WDS)
 		return TX_CONTINUE;
 
-	if (tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
-		return TX_CONTINUE;
-
 	if (tx->flags & IEEE80211_TX_PS_BUFFERED)
 		return TX_CONTINUE;