diff mbox

ARM: apq8064: Add pinmux and i2c pinctrl nodes

Message ID 1408000853-2764-1-git-send-email-kiran.padwal@smartplayin.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

kiran.padwal@smartplayin.com Aug. 14, 2014, 7:20 a.m. UTC 
This patch adds pinmux and i2c pinctrl DT node for IFC6410 board.
It also adds necessary DT support for i2c eeprom which is present on
IFC6410.

Tested on IFC6410 board.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   29 ++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi        |   59 ++++++++++++++++++++++++++++
 2 files changed, 88 insertions(+)

Comments

Bjorn Andersson Aug. 14, 2014, 10:37 p.m. UTC | #1 
On Thu, Aug 14, 2014 at 12:20 AM, Kiran Padwal
<kiran.padwal@smartplayin.com> wrote:
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 92bf793..fbebf5c 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -70,6 +70,17 @@
>                 ranges;
>                 compatible = "simple-bus";
>
> +               qcom_pinmux: pinmux@800000 {

There are (at least) three different pinmuxes in these platforms: TLMM, PMIC
GPIO, PMIC MPP. Also this is the phandle that is used to reference the gpio
chip throughout the board.

So I would like to suggest that we name it "tlmm" or like in the downstream
kernel "msmgpio".

> +                       compatible = "qcom,apq8064-pinctrl";
> +                       reg = <0x800000 0x4000>;
> +
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +                       interrupts = <0 32 0x4>;

I must have gotten this wrong in the dt binding example, sorry about that.
interrupts should be <0 16 0x4>.

> +               };

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7c2441d..d52ac3c 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,15 @@ 
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
 
 	soc {
+		pinmux@800000 {
+			i2c1_pins: i2c1_pinmux {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+		};
+
 		gsbi@16600000 {
 			status = "ok";
 			qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -12,5 +21,25 @@ 
 				status = "ok";
 			};
 		};
+
+		gsbi1: gsbi@12440000 {
+			qcom,mode = <GSBI_PROT_I2C>;
+			status = "ok";
+
+			i2c1: i2c@12460000 {
+				status = "ok";
+
+				clock-frequency = <200000>;
+
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92bf793..fbebf5c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -70,6 +70,17 @@ 
 		ranges;
 		compatible = "simple-bus";
 
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 32 0x4>;
+		};
+
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
@@ -133,6 +144,54 @@ 
 			regulator;
 		};
 
+		gsbi1: gsbi@12440000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 0>;
+
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 0>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gsbi7: gsbi@16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";