diff mbox

[1/2] ARM: dts: imx28: add pinmuxing for mmc1

Message ID 1407489862-6358-1-git-send-email-u.kleine-koenig@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Uwe Kleine-König Aug. 8, 2014, 9:24 a.m. UTC 
From: Marc Kleine-Budde <mkl@pengutronix.de>

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[ukl: rebase from ancient kernel version]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/boot/dts/imx28.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Comments

Shawn Guo Aug. 18, 2014, 6:11 a.m. UTC | #1 
On Fri, Aug 08, 2014 at 11:24:21AM +0200, Uwe Kleine-König wrote:
> From: Marc Kleine-Budde <mkl@pengutronix.de>
> 
> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
> [ukl: rebase from ancient kernel version]
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> ---
>  arch/arm/boot/dts/imx28.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)

Applied both, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a95cc5358ff4..defb98a5b045 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -489,6 +489,38 @@ 
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
 				mmc2_4bit_pins_a: mmc2-4bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <