diff mbox

[3/4] mmc: host: switch OF parser to use gpio descriptors

Message ID 1407864355-21545-3-git-send-email-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij Aug. 12, 2014, 5:25 p.m. UTC
This switches the central MMC OF parser to use gpio descriptors
instead of grabbing GPIOs explicitly from the device tree.
This strips out an unecessary use of the integer-based GPIO
API that we want to get rid of, cuts down on code as the
gpio descriptor code will handle active low flags.

As it is in no way a bug not to supply CD/WP GPIOs the messages
about them not being specified have been depromoted from
dev_err() to dev_dbg().

Cc: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mmc/core/host.c | 68 +++++++++++++++----------------------------------
 1 file changed, 21 insertions(+), 47 deletions(-)

Comments

Alexandre Courbot Aug. 14, 2014, 2:33 p.m. UTC | #1
On Tue, Aug 12, 2014 at 10:25 AM, Linus Walleij
<linus.walleij@linaro.org> wrote:
> This switches the central MMC OF parser to use gpio descriptors
> instead of grabbing GPIOs explicitly from the device tree.
> This strips out an unecessary use of the integer-based GPIO
> API that we want to get rid of, cuts down on code as the
> gpio descriptor code will handle active low flags.
>
> As it is in no way a bug not to supply CD/WP GPIOs the messages
> about them not being specified have been depromoted from
> dev_err() to dev_dbg().

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ulf Hansson Aug. 18, 2014, 11:26 a.m. UTC | #2
On 12 August 2014 19:25, Linus Walleij <linus.walleij@linaro.org> wrote:
> This switches the central MMC OF parser to use gpio descriptors
> instead of grabbing GPIOs explicitly from the device tree.
> This strips out an unecessary use of the integer-based GPIO
> API that we want to get rid of, cuts down on code as the
> gpio descriptor code will handle active low flags.
>
> As it is in no way a bug not to supply CD/WP GPIOs the messages
> about them not being specified have been depromoted from
> dev_err() to dev_dbg().
>
> Cc: Alexandre Courbot <gnurou@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Thanks! Applied for next.

Kind regards
Uffe


> ---
>  drivers/mmc/core/host.c | 68 +++++++++++++++----------------------------------
>  1 file changed, 21 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 95cceae96944..048c6d687cc9 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -310,9 +310,7 @@ int mmc_of_parse(struct mmc_host *host)
>  {
>         struct device_node *np;
>         u32 bus_width;
> -       bool explicit_inv_wp, gpio_inv_wp = false;
> -       enum of_gpio_flags flags;
> -       int len, ret, gpio;
> +       int len, ret;
>
>         if (!host->parent || !host->parent->of_node)
>                 return 0;
> @@ -360,60 +358,36 @@ int mmc_of_parse(struct mmc_host *host)
>         if (of_find_property(np, "non-removable", &len)) {
>                 host->caps |= MMC_CAP_NONREMOVABLE;
>         } else {
> -               bool explicit_inv_cd, gpio_inv_cd = false;
> -
> -               explicit_inv_cd = of_property_read_bool(np, "cd-inverted");
> +               if (of_property_read_bool(np, "cd-inverted"))
> +                       host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
>
>                 if (of_find_property(np, "broken-cd", &len))
>                         host->caps |= MMC_CAP_NEEDS_POLL;
>
> -               gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags);
> -               if (gpio == -EPROBE_DEFER)
> -                       return gpio;
> -               if (gpio_is_valid(gpio)) {
> -                       if (!(flags & OF_GPIO_ACTIVE_LOW))
> -                               gpio_inv_cd = true;
> -
> -                       ret = mmc_gpio_request_cd(host, gpio, 0);
> -                       if (ret < 0) {
> -                               dev_err(host->parent,
> -                                       "Failed to request CD GPIO #%d: %d!\n",
> -                                       gpio, ret);
> +               ret = mmc_gpiod_request_cd(host, "cd", 0, false, 0);
> +               if (ret) {
> +                       if (ret == -EPROBE_DEFER)
>                                 return ret;
> -                       } else {
> -                               dev_info(host->parent, "Got CD GPIO #%d.\n",
> -                                        gpio);
> -                       }
> -               }
> -
> -               if (explicit_inv_cd ^ gpio_inv_cd)
> -                       host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
> +                       dev_dbg(host->parent,
> +                               "Failed to request CD GPIO: %d\n",
> +                               ret);
> +               } else
> +                       dev_info(host->parent, "Got CD GPIO\n");
>         }
>
>         /* Parse Write Protection */
> -       explicit_inv_wp = of_property_read_bool(np, "wp-inverted");
> +       if (of_property_read_bool(np, "wp-inverted"))
> +               host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
>
> -       gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
> -       if (gpio == -EPROBE_DEFER) {
> -               ret = -EPROBE_DEFER;
> -               goto out;
> -       }
> -       if (gpio_is_valid(gpio)) {
> -               if (!(flags & OF_GPIO_ACTIVE_LOW))
> -                       gpio_inv_wp = true;
> -
> -               ret = mmc_gpio_request_ro(host, gpio);
> -               if (ret < 0) {
> -                       dev_err(host->parent,
> -                               "Failed to request WP GPIO: %d!\n", ret);
> +       ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0);
> +       if (ret) {
> +               if (ret == -EPROBE_DEFER)
>                         goto out;
> -               } else {
> -                               dev_info(host->parent, "Got WP GPIO #%d.\n",
> -                                        gpio);
> -               }
> -       }
> -       if (explicit_inv_wp ^ gpio_inv_wp)
> -               host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
> +               dev_dbg(host->parent,
> +                       "Failed to request WP GPIO: %d\n",
> +                       ret);
> +       } else
> +               dev_info(host->parent, "Got WP GPIO\n");
>
>         if (of_find_property(np, "cap-sd-highspeed", &len))
>                 host->caps |= MMC_CAP_SD_HIGHSPEED;
> --
> 1.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Baatz Aug. 18, 2014, 7:46 p.m. UTC | #3
Hi Linus,

On Tue, Aug 12, 2014 at 07:25:54PM +0200, Linus Walleij wrote:
> This switches the central MMC OF parser to use gpio descriptors
> instead of grabbing GPIOs explicitly from the device tree.
> This strips out an unecessary use of the integer-based GPIO
> API that we want to get rid of, cuts down on code as the
> gpio descriptor code will handle active low flags.
> 
> As it is in no way a bug not to supply CD/WP GPIOs the messages
> about them not being specified have been depromoted from
> dev_err() to dev_dbg().

I think the intention of the current code is to issue an
error if a valid GPIO was specified but could not be obtained.  It
should not issue an error just because the CD/WP GPIOs are not
specified.

This patch changes this behaviour. If the GPIO is specified
explicitly but cannot be obtained for some reason, the driver's probe
calling mmc_of_parse() will probably be successful.  Since debug
level messages are usually not enabled, the problem with the GPIO may
not even be visible in the logs.  For example, if I specify the same
GPIO for CD and WP in the DTS:

[    2.093442] kirkwood-pinctrl f1010000.pin-controller: request pin
44 (PIN44) for mvebu-gpio:44
[    2.093459] mvsdio f1090000.mvsdio: Got CD GPIO
[    2.118734] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with
MAC address 00:50:43:c3:55:55

One can only infer from the missing "Got WP GPIO" that something went
wrong.  Previously, the driver would not even load:

...
[    1.973402] mvsdio f1090000.mvsdio: Failed to request WP GPIO: -16!
[    1.979831] mvsdio: probe of f1090000.mvsdio failed with error -16

One can argue whether the current behaviour is too strict (and we did
that in the past, leading to the current code), but issuing only a
debug message when allocating an explicitly requested resource fails
is too tolerant, IMHO.


- Simon
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Aug. 19, 2014, 3:27 a.m. UTC | #4
On Mon, Aug 18, 2014 at 2:46 PM, Simon Baatz <gmbnomis@gmail.com> wrote:
> On Tue, Aug 12, 2014 at 07:25:54PM +0200, Linus Walleij wrote:
>> This switches the central MMC OF parser to use gpio descriptors
>> instead of grabbing GPIOs explicitly from the device tree.
>> This strips out an unecessary use of the integer-based GPIO
>> API that we want to get rid of, cuts down on code as the
>> gpio descriptor code will handle active low flags.
>>
>> As it is in no way a bug not to supply CD/WP GPIOs the messages
>> about them not being specified have been depromoted from
>> dev_err() to dev_dbg().
>
> I think the intention of the current code is to issue an
> error if a valid GPIO was specified but could not be obtained.

OK I'll post a fixup.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 95cceae96944..048c6d687cc9 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -310,9 +310,7 @@  int mmc_of_parse(struct mmc_host *host)
 {
 	struct device_node *np;
 	u32 bus_width;
-	bool explicit_inv_wp, gpio_inv_wp = false;
-	enum of_gpio_flags flags;
-	int len, ret, gpio;
+	int len, ret;
 
 	if (!host->parent || !host->parent->of_node)
 		return 0;
@@ -360,60 +358,36 @@  int mmc_of_parse(struct mmc_host *host)
 	if (of_find_property(np, "non-removable", &len)) {
 		host->caps |= MMC_CAP_NONREMOVABLE;
 	} else {
-		bool explicit_inv_cd, gpio_inv_cd = false;
-
-		explicit_inv_cd = of_property_read_bool(np, "cd-inverted");
+		if (of_property_read_bool(np, "cd-inverted"))
+			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
 
 		if (of_find_property(np, "broken-cd", &len))
 			host->caps |= MMC_CAP_NEEDS_POLL;
 
-		gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags);
-		if (gpio == -EPROBE_DEFER)
-			return gpio;
-		if (gpio_is_valid(gpio)) {
-			if (!(flags & OF_GPIO_ACTIVE_LOW))
-				gpio_inv_cd = true;
-
-			ret = mmc_gpio_request_cd(host, gpio, 0);
-			if (ret < 0) {
-				dev_err(host->parent,
-					"Failed to request CD GPIO #%d: %d!\n",
-					gpio, ret);
+		ret = mmc_gpiod_request_cd(host, "cd", 0, false, 0);
+		if (ret) {
+			if (ret == -EPROBE_DEFER)
 				return ret;
-			} else {
-				dev_info(host->parent, "Got CD GPIO #%d.\n",
-					 gpio);
-			}
-		}
-
-		if (explicit_inv_cd ^ gpio_inv_cd)
-			host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+			dev_dbg(host->parent,
+				"Failed to request CD GPIO: %d\n",
+				ret);
+		} else
+			dev_info(host->parent, "Got CD GPIO\n");
 	}
 
 	/* Parse Write Protection */
-	explicit_inv_wp = of_property_read_bool(np, "wp-inverted");
+	if (of_property_read_bool(np, "wp-inverted"))
+		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
 
-	gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
-	if (gpio == -EPROBE_DEFER) {
-		ret = -EPROBE_DEFER;
-		goto out;
-	}
-	if (gpio_is_valid(gpio)) {
-		if (!(flags & OF_GPIO_ACTIVE_LOW))
-			gpio_inv_wp = true;
-
-		ret = mmc_gpio_request_ro(host, gpio);
-		if (ret < 0) {
-			dev_err(host->parent,
-				"Failed to request WP GPIO: %d!\n", ret);
+	ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0);
+	if (ret) {
+		if (ret == -EPROBE_DEFER)
 			goto out;
-		} else {
-				dev_info(host->parent, "Got WP GPIO #%d.\n",
-					 gpio);
-		}
-	}
-	if (explicit_inv_wp ^ gpio_inv_wp)
-		host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
+		dev_dbg(host->parent,
+			"Failed to request WP GPIO: %d\n",
+			ret);
+	} else
+		dev_info(host->parent, "Got WP GPIO\n");
 
 	if (of_find_property(np, "cap-sd-highspeed", &len))
 		host->caps |= MMC_CAP_SD_HIGHSPEED;