Message ID | 1407235677-26324-11-git-send-email-m.szyprowski@samsung.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Hi Greg, On 2014-08-05 12:47, Marek Szyprowski wrote: > This patch adds a new flags for device drivers. This flag instructs > kernel that the device driver does it own management of IOMMU assisted > IO address space translations, so no default dma-mapping structures > should be initialized. > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > --- > include/linux/device.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/linux/device.h b/include/linux/device.h > index 5f4ff02..2e62371 100644 > --- a/include/linux/device.h > +++ b/include/linux/device.h > @@ -253,6 +253,8 @@ struct device_driver { > > /* disables bind/unbind via sysfs */ > #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) > +/* driver uses own methods to manage IO address space */ > +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) > > extern int __must_check driver_register(struct device_driver *drv); > extern void driver_unregister(struct device_driver *drv); Could you comment if the approach of using flags in the struct driver could be accepted? I've converted suppress_bind_attrs entry to flags to avoid extending the structure, please see patch "[PATCH 05/29] drivers: convert suppress_bind_attrs parameter into flags". Best regards
On Mon, Sep 01, 2014 at 07:22:32AM +0200, Marek Szyprowski wrote: > Hi Greg, > > On 2014-08-05 12:47, Marek Szyprowski wrote: > > This patch adds a new flags for device drivers. This flag instructs > > kernel that the device driver does it own management of IOMMU assisted > > IO address space translations, so no default dma-mapping structures > > should be initialized. > > > > Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > > --- > > include/linux/device.h | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/include/linux/device.h b/include/linux/device.h > > index 5f4ff02..2e62371 100644 > > --- a/include/linux/device.h > > +++ b/include/linux/device.h > > @@ -253,6 +253,8 @@ struct device_driver { > > > > /* disables bind/unbind via sysfs */ > > #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) > > +/* driver uses own methods to manage IO address space */ > > +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) > > > > extern int __must_check driver_register(struct device_driver *drv); > > extern void driver_unregister(struct device_driver *drv); > > Could you comment if the approach of using flags in the struct driver > could be accepted? I've converted suppress_bind_attrs entry to flags to > avoid extending the structure, please see patch "[PATCH 05/29] drivers: > convert suppress_bind_attrs parameter into flags". Is this really necessary? What I did as part of an RFC series for Tegra IOMMU support is keep this knowledge within the IOMMU driver rather than export it to the driver core. The idea being that the IOMMU driver wouldn't create an ARM DMA/IOMMU mapping by default but rather allow individual drivers to be marked as "kernel-internal" and use the DMA/IOMMU glue in that case. Drivers such as DRM would use the IOMMU API directly. Thierry
Hello, On 2014-09-01 09:07, Thierry Reding wrote: > On Mon, Sep 01, 2014 at 07:22:32AM +0200, Marek Szyprowski wrote: >> Hi Greg, >> >> On 2014-08-05 12:47, Marek Szyprowski wrote: >>> This patch adds a new flags for device drivers. This flag instructs >>> kernel that the device driver does it own management of IOMMU assisted >>> IO address space translations, so no default dma-mapping structures >>> should be initialized. >>> >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >>> --- >>> include/linux/device.h | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/include/linux/device.h b/include/linux/device.h >>> index 5f4ff02..2e62371 100644 >>> --- a/include/linux/device.h >>> +++ b/include/linux/device.h >>> @@ -253,6 +253,8 @@ struct device_driver { >>> >>> /* disables bind/unbind via sysfs */ >>> #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) >>> +/* driver uses own methods to manage IO address space */ >>> +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) >>> >>> extern int __must_check driver_register(struct device_driver *drv); >>> extern void driver_unregister(struct device_driver *drv); >> Could you comment if the approach of using flags in the struct driver >> could be accepted? I've converted suppress_bind_attrs entry to flags to >> avoid extending the structure, please see patch "[PATCH 05/29] drivers: >> convert suppress_bind_attrs parameter into flags". > Is this really necessary? What I did as part of an RFC series for Tegra > IOMMU support is keep this knowledge within the IOMMU driver rather than > export it to the driver core.i The problem with embedding the list of drivers that you would need to update it everytime when you modify or extend iommu support in the other drivers. I've tried also other approach, like adding respective notifiers to individual drivers to initialize custom iommu support (or disable default iommu mapping) before iommu driver gets initialized, but such solution is in my opinion too complex and hard to understand if one is not familiar will all this stuff. All in all it turned out that the simplest and most generic way is to simply add the flag to the driver core. Flags might be also used in the future to model other kinds of dependencies between device drivers and/or driver core. > The idea being that the IOMMU driver wouldn't create an ARM DMA/IOMMU > mapping by default but rather allow individual drivers to be marked as > "kernel-internal" and use the DMA/IOMMU glue in that case. Drivers such > as DRM would use the IOMMU API directly. Best regards
On Monday 01 September 2014 09:53:29 Marek Szyprowski wrote: > On 2014-09-01 09:07, Thierry Reding wrote: > > On Mon, Sep 01, 2014 at 07:22:32AM +0200, Marek Szyprowski wrote: > >> Hi Greg, > >> > >> On 2014-08-05 12:47, Marek Szyprowski wrote: > >>> This patch adds a new flags for device drivers. This flag instructs > >>> kernel that the device driver does it own management of IOMMU assisted > >>> IO address space translations, so no default dma-mapping structures > >>> should be initialized. > >>> > >>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> > >>> --- > >>> include/linux/device.h | 2 ++ > >>> 1 file changed, 2 insertions(+) > >>> > >>> diff --git a/include/linux/device.h b/include/linux/device.h > >>> index 5f4ff02..2e62371 100644 > >>> --- a/include/linux/device.h > >>> +++ b/include/linux/device.h > >>> @@ -253,6 +253,8 @@ struct device_driver { > >>> > >>> /* disables bind/unbind via sysfs */ > >>> #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) > >>> +/* driver uses own methods to manage IO address space */ > >>> +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) > >>> > >>> extern int __must_check driver_register(struct device_driver *drv); > >>> extern void driver_unregister(struct device_driver *drv); > >> Could you comment if the approach of using flags in the struct driver > >> could be accepted? I've converted suppress_bind_attrs entry to flags to > >> avoid extending the structure, please see patch "[PATCH 05/29] drivers: > >> convert suppress_bind_attrs parameter into flags". > > Is this really necessary? What I did as part of an RFC series for Tegra > > IOMMU support is keep this knowledge within the IOMMU driver rather than > > export it to the driver core.i > > The problem with embedding the list of drivers that you would need to update > it everytime when you modify or extend iommu support in the other drivers. > I've tried also other approach, like adding respective notifiers to > individual > drivers to initialize custom iommu support (or disable default iommu > mapping) > before iommu driver gets initialized, but such solution is in my opinion too > complex and hard to understand if one is not familiar will all this stuff. > > All in all it turned out that the simplest and most generic way is to simply > add the flag to the driver core. Flags might be also used in the future > to model other kinds of dependencies between device drivers and/or driver > core. I don't get it yet. I would expect that a driver doing its own management of the iommu gets to use the linux/iommu.h interfaces, while a driver using the default iommu setup uses linux/dma-mapping.h. Who do you think needs to set this flag, and who needs to read it? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On 2014-09-01 11:38, Arnd Bergmann wrote: > On Monday 01 September 2014 09:53:29 Marek Szyprowski wrote: >> On 2014-09-01 09:07, Thierry Reding wrote: >>> On Mon, Sep 01, 2014 at 07:22:32AM +0200, Marek Szyprowski wrote: >>>> Hi Greg, >>>> >>>> On 2014-08-05 12:47, Marek Szyprowski wrote: >>>>> This patch adds a new flags for device drivers. This flag instructs >>>>> kernel that the device driver does it own management of IOMMU assisted >>>>> IO address space translations, so no default dma-mapping structures >>>>> should be initialized. >>>>> >>>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> >>>>> --- >>>>> include/linux/device.h | 2 ++ >>>>> 1 file changed, 2 insertions(+) >>>>> >>>>> diff --git a/include/linux/device.h b/include/linux/device.h >>>>> index 5f4ff02..2e62371 100644 >>>>> --- a/include/linux/device.h >>>>> +++ b/include/linux/device.h >>>>> @@ -253,6 +253,8 @@ struct device_driver { >>>>> >>>>> /* disables bind/unbind via sysfs */ >>>>> #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) >>>>> +/* driver uses own methods to manage IO address space */ >>>>> +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) >>>>> >>>>> extern int __must_check driver_register(struct device_driver *drv); >>>>> extern void driver_unregister(struct device_driver *drv); >>>> Could you comment if the approach of using flags in the struct driver >>>> could be accepted? I've converted suppress_bind_attrs entry to flags to >>>> avoid extending the structure, please see patch "[PATCH 05/29] drivers: >>>> convert suppress_bind_attrs parameter into flags". >>> Is this really necessary? What I did as part of an RFC series for Tegra >>> IOMMU support is keep this knowledge within the IOMMU driver rather than >>> export it to the driver core.i >> The problem with embedding the list of drivers that you would need to update >> it everytime when you modify or extend iommu support in the other drivers. >> I've tried also other approach, like adding respective notifiers to >> individual >> drivers to initialize custom iommu support (or disable default iommu >> mapping) >> before iommu driver gets initialized, but such solution is in my opinion too >> complex and hard to understand if one is not familiar will all this stuff. >> >> All in all it turned out that the simplest and most generic way is to simply >> add the flag to the driver core. Flags might be also used in the future >> to model other kinds of dependencies between device drivers and/or driver >> core. > I don't get it yet. I would expect that a driver doing its own management > of the iommu gets to use the linux/iommu.h interfaces, while a driver > using the default iommu setup uses linux/dma-mapping.h. You are right. > Who do you think needs to set this flag, and who needs to read it? In the proposed solution Exynos IOMMU driver creates a separate IO address space for every client device in a system and binds it to the default dma-mapping space for the given device. When drivers are doing its own management of IO address space, instead of relying on what is available by default with dma-mapping interface, this will require releasing of the previously created default structures and resources. So this flag is set by the driver doing its own management of io address space. The flags is then checked by Exynos IOMMU driver to avoid creating the default dma-mapping address space for devices which driver does its own management. Best regards
On Monday 01 September 2014 12:47:08 Marek Szyprowski wrote: > > Who do you think needs to set this flag, and who needs to read it? > > In the proposed solution Exynos IOMMU driver creates a separate IO > address space > for every client device in a system and binds it to the default > dma-mapping space > for the given device. When drivers are doing its own management of IO > address > space, instead of relying on what is available by default with dma-mapping > interface, this will require releasing of the previously created default > structures and resources. So this flag is set by the driver doing its own > management of io address space. The flags is then checked by Exynos > IOMMU driver > to avoid creating the default dma-mapping address space for devices > which driver > does its own management. I don't completely understand it yet. I would assume the device to be added to the default domain at device creation time (of_platform_populate), way before we know which device driver is going to be used. How can this prevent the iommu driver from doing the association with the domain? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello, On 2014-09-01 13:56, Arnd Bergmann wrote: > On Monday 01 September 2014 12:47:08 Marek Szyprowski wrote: >>> Who do you think needs to set this flag, and who needs to read it? >> In the proposed solution Exynos IOMMU driver creates a separate IO >> address space >> for every client device in a system and binds it to the default >> dma-mapping space >> for the given device. When drivers are doing its own management of IO >> address >> space, instead of relying on what is available by default with dma-mapping >> interface, this will require releasing of the previously created default >> structures and resources. So this flag is set by the driver doing its own >> management of io address space. The flags is then checked by Exynos >> IOMMU driver >> to avoid creating the default dma-mapping address space for devices >> which driver >> does its own management. > I don't completely understand it yet. I would assume the device > to be added to the default domain at device creation time > (of_platform_populate), way before we know which device driver > is going to be used. How can this prevent the iommu driver > from doing the association with the domain? of_platform_populate() is too early to do the association, because that time the exynos iommu driver is even not yet probed. The association with default dma-mapping domain is done in IOMMU_GROUP_NOTIFY_BIND_DRIVER notifier, just before binding the driver to the given device. This way iommu driver can check dev->driver->flags and skip creating default dma-mapping domain if driver announces that it wants to handle it by itself. Best regards
On Monday 01 September 2014 14:07:34 Marek Szyprowski wrote: > On 2014-09-01 13:56, Arnd Bergmann wrote: > > On Monday 01 September 2014 12:47:08 Marek Szyprowski wrote: > >>> Who do you think needs to set this flag, and who needs to read it? > >> In the proposed solution Exynos IOMMU driver creates a separate IO > >> address space > >> for every client device in a system and binds it to the default > >> dma-mapping space > >> for the given device. When drivers are doing its own management of IO > >> address > >> space, instead of relying on what is available by default with dma-mapping > >> interface, this will require releasing of the previously created default > >> structures and resources. So this flag is set by the driver doing its own > >> management of io address space. The flags is then checked by Exynos > >> IOMMU driver > >> to avoid creating the default dma-mapping address space for devices > >> which driver > >> does its own management. > > I don't completely understand it yet. I would assume the device > > to be added to the default domain at device creation time > > (of_platform_populate), way before we know which device driver > > is going to be used. How can this prevent the iommu driver > > from doing the association with the domain? > > of_platform_populate() is too early to do the association, because that > time the > exynos iommu driver is even not yet probed. Please have a look at the "Introduce automatic DMA configuration for IOMMU masters" series that Will Deacon sent out the other day. The idea is that we are changing the probe order so that the iommu gets initialized early enough for all IOMMU association to be done there. > The association with default dma-mapping domain is done in > IOMMU_GROUP_NOTIFY_BIND_DRIVER notifier, just before binding the driver > to the > given device. This way iommu driver can check dev->driver->flags and > skip creating > default dma-mapping domain if driver announces that it wants to handle it by > itself. I really want to kill off those notifiers. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/device.h b/include/linux/device.h index 5f4ff02..2e62371 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -253,6 +253,8 @@ struct device_driver { /* disables bind/unbind via sysfs */ #define DRIVER_SUPPRESS_BIND_ATTRS (1 << 0) +/* driver uses own methods to manage IO address space */ +#define DRIVER_HAS_OWN_IOMMU_MANAGER (1 << 1) extern int __must_check driver_register(struct device_driver *drv); extern void driver_unregister(struct device_driver *drv);
This patch adds a new flags for device drivers. This flag instructs kernel that the device driver does it own management of IOMMU assisted IO address space translations, so no default dma-mapping structures should be initialized. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- include/linux/device.h | 2 ++ 1 file changed, 2 insertions(+)