diff mbox

[08/11] ARM: dts: rockchip: add operating points and armclk references

Message ID 1409958374-30937-9-git-send-email-heiko@sntech.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stuebner Sept. 5, 2014, 11:06 p.m. UTC
Add basic OPP entries for current supported Rockchip SoCs.
The operating points are currently very conservative, so individual
boards may opt to redefine them.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
 arch/arm/boot/dts/rk3188.dtsi  | 15 ++++++++++++++-
 arch/arm/boot/dts/rk3288.dtsi  | 17 ++++++++++++++++-
 3 files changed, 41 insertions(+), 3 deletions(-)

Comments

Doug Anderson Sept. 8, 2014, 8:16 p.m. UTC | #1
Heiko,

On Fri, Sep 5, 2014 at 4:06 PM, Heiko Stuebner <heiko@sntech.de> wrote:
> Add basic OPP entries for current supported Rockchip SoCs.
> The operating points are currently very conservative, so individual
> boards may opt to redefine them.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
>  arch/arm/boot/dts/rk3188.dtsi  | 15 ++++++++++++++-
>  arch/arm/boot/dts/rk3288.dtsi  | 17 ++++++++++++++++-
>  3 files changed, 41 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
> index 879a818..572c30b 100644
> --- a/arch/arm/boot/dts/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rk3066a.dtsi
> @@ -26,11 +26,21 @@
>                 #size-cells = <0>;
>                 enable-method = "rockchip,rk3066-smp";
>
> -               cpu@0 {
> +               cpu0: cpu@0 {
>                         device_type = "cpu";
>                         compatible = "arm,cortex-a9";
>                         next-level-cache = <&L2>;
>                         reg = <0x0>;
> +                       operating-points = <
> +                               /* kHz    uV */
> +                               1008000 1075000
> +                                816000 1025000
> +                                600000 1025000
> +                                504000 1000000
> +                                312000  975000
> +                       >;
> +                       clock-latency = <40000>;
> +                       clocks = <&cru ARMCLK>;
>                 };
>                 cpu@1 {
>                         device_type = "cpu";
> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
> index ee801a9..e237216 100644
> --- a/arch/arm/boot/dts/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rk3188.dtsi
> @@ -26,11 +26,24 @@
>                 #size-cells = <0>;
>                 enable-method = "rockchip,rk3066-smp";
>
> -               cpu@0 {
> +               cpu0: cpu@0 {
>                         device_type = "cpu";
>                         compatible = "arm,cortex-a9";
>                         next-level-cache = <&L2>;
>                         reg = <0x0>;
> +                       operating-points = <
> +                               /* kHz    uV */
> +                               1608000 1350000
> +                               1416000 1250000
> +                               1200000 1150000
> +                               1008000 1075000
> +                                816000  975000
> +                                600000  950000
> +                                504000  925000
> +                                312000  875000
> +                       >;
> +                       clock-latency = <40000>;
> +                       clocks = <&cru ARMCLK>;
>                 };
>                 cpu@1 {
>                         device_type = "cpu";
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 5950b0a..9275a47 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -40,10 +40,25 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>
> -               cpu@500 {
> +               cpu0: cpu@500 {
>                         device_type = "cpu";
>                         compatible = "arm,cortex-a12";
>                         reg = <0x500>;
> +                       operating-points = <
> +                               /* KHz    uV */
> +                               1416000 1150000
> +                               1200000 1050000
> +                               1008000 1000000
> +                               816000  950000
> +                               696000  900000
> +                               600000  850000
> +                               408000  850000
> +                               312000  850000
> +                               216000  850000
> +                               126000  850000
> +                       >;

This doesn't quite match the ordering that Kever put up most recently
at <https://chromium-review.googlesource.com/#/c/211862/2/arch/arm/boot/dts/rk3288.dtsi>.
Specifically, he has:

1800000 1300000
1608000 1200000
1416000 1150000
1200000 1100000
1008000 1050000
[ 816000 1000000
600000 900000
408000 850000
216000 850000
126000 850000

-Doug
FUKAUMI Naoki Sept. 8, 2014, 11:45 p.m. UTC | #2
hi

On Tue, Sep 9, 2014 at 5:16 AM, Doug Anderson <dianders@chromium.org> wrote:
> Heiko,
>
> On Fri, Sep 5, 2014 at 4:06 PM, Heiko Stuebner <heiko@sntech.de> wrote:
>> Add basic OPP entries for current supported Rockchip SoCs.
>> The operating points are currently very conservative, so individual
>> boards may opt to redefine them.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>  arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
>>  arch/arm/boot/dts/rk3188.dtsi  | 15 ++++++++++++++-
>>  arch/arm/boot/dts/rk3288.dtsi  | 17 ++++++++++++++++-
>>  3 files changed, 41 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
>> index 879a818..572c30b 100644
>> --- a/arch/arm/boot/dts/rk3066a.dtsi
>> +++ b/arch/arm/boot/dts/rk3066a.dtsi
>> @@ -26,11 +26,21 @@
>>                 #size-cells = <0>;
>>                 enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu@0 {
>> +               cpu0: cpu@0 {
>>                         device_type = "cpu";
>>                         compatible = "arm,cortex-a9";
>>                         next-level-cache = <&L2>;
>>                         reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1008000 1075000
>> +                                816000 1025000
>> +                                600000 1025000
>> +                                504000 1000000
>> +                                312000  975000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                 };
>>                 cpu@1 {
>>                         device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
>> index ee801a9..e237216 100644
>> --- a/arch/arm/boot/dts/rk3188.dtsi
>> +++ b/arch/arm/boot/dts/rk3188.dtsi
>> @@ -26,11 +26,24 @@
>>                 #size-cells = <0>;
>>                 enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu@0 {
>> +               cpu0: cpu@0 {
>>                         device_type = "cpu";
>>                         compatible = "arm,cortex-a9";
>>                         next-level-cache = <&L2>;
>>                         reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1608000 1350000
>> +                               1416000 1250000
>> +                               1200000 1150000
>> +                               1008000 1075000
>> +                                816000  975000
>> +                                600000  950000
>> +                                504000  925000
>> +                                312000  875000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                 };
>>                 cpu@1 {
>>                         device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 5950b0a..9275a47 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -40,10 +40,25 @@
>>                 #address-cells = <1>;
>>                 #size-cells = <0>;
>>
>> -               cpu@500 {
>> +               cpu0: cpu@500 {
>>                         device_type = "cpu";
>>                         compatible = "arm,cortex-a12";
>>                         reg = <0x500>;
>> +                       operating-points = <
>> +                               /* KHz    uV */
>> +                               1416000 1150000
>> +                               1200000 1050000
>> +                               1008000 1000000
>> +                               816000  950000
>> +                               696000  900000
>> +                               600000  850000
>> +                               408000  850000
>> +                               312000  850000
>> +                               216000  850000
>> +                               126000  850000
>> +                       >;
>
> This doesn't quite match the ordering that Kever put up most recently
> at <https://chromium-review.googlesource.com/#/c/211862/2/arch/arm/boot/dts/rk3288.dtsi>.
> Specifically, he has:
>
> 1800000 1300000
> 1608000 1200000
> 1416000 1150000
> 1200000 1100000
> 1008000 1050000
> [ 816000 1000000
> 600000 900000
> 408000 850000
> 216000 850000
> 126000 850000

in Rockchip R-BOX SDK(for Box/HDMI dongle), voltage is bit higher...

https://bitbucket.org/T-Firefly/firefly-rk3288/src/ab220fdc428283b2358644eec36059bb58b429a0/kernel/arch/arm/boot/dts/rk3288-box.dts?at=master#cl-557

                126000 900000
                216000 900000
                312000 900000
                408000 900000
                600000 950000
                696000 950000
                816000 1000000
                1008000 1050000
                1200000 1100000
                1416000 1200000
                1512000 1300000
                1608000 1350000
                1704000 1350000
                1800000 1350000

and there are different set of values in other rk3288-*.dts.

(I don't know which is correct, sorry)
Kever Yang Sept. 12, 2014, 7:33 a.m. UTC | #3
Heiko,

On 09/09/2014 04:16 AM, Doug Anderson wrote:
> Heiko,
>
> On Fri, Sep 5, 2014 at 4:06 PM, Heiko Stuebner <heiko@sntech.de> wrote:
>> Add basic OPP entries for current supported Rockchip SoCs.
>> The operating points are currently very conservative, so individual
>> boards may opt to redefine them.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>   arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
>>   arch/arm/boot/dts/rk3188.dtsi  | 15 ++++++++++++++-
>>   arch/arm/boot/dts/rk3288.dtsi  | 17 ++++++++++++++++-
>>   3 files changed, 41 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
>> index 879a818..572c30b 100644
>> --- a/arch/arm/boot/dts/rk3066a.dtsi
>> +++ b/arch/arm/boot/dts/rk3066a.dtsi
>> @@ -26,11 +26,21 @@
>>                  #size-cells = <0>;
>>                  enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu@0 {
>> +               cpu0: cpu@0 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a9";
>>                          next-level-cache = <&L2>;
>>                          reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1008000 1075000
>> +                                816000 1025000
>> +                                600000 1025000
>> +                                504000 1000000
>> +                                312000  975000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                  };
>>                  cpu@1 {
>>                          device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
>> index ee801a9..e237216 100644
>> --- a/arch/arm/boot/dts/rk3188.dtsi
>> +++ b/arch/arm/boot/dts/rk3188.dtsi
>> @@ -26,11 +26,24 @@
>>                  #size-cells = <0>;
>>                  enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu@0 {
>> +               cpu0: cpu@0 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a9";
>>                          next-level-cache = <&L2>;
>>                          reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1608000 1350000
>> +                               1416000 1250000
>> +                               1200000 1150000
>> +                               1008000 1075000
>> +                                816000  975000
>> +                                600000  950000
>> +                                504000  925000
>> +                                312000  875000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                  };
>>                  cpu@1 {
>>                          device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 5950b0a..9275a47 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -40,10 +40,25 @@
>>                  #address-cells = <1>;
>>                  #size-cells = <0>;
>>
>> -               cpu@500 {
>> +               cpu0: cpu@500 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a12";
>>                          reg = <0x500>;
>> +                       operating-points = <
>> +                               /* KHz    uV */
>> +                               1416000 1150000
>> +                               1200000 1050000
>> +                               1008000 1000000
>> +                               816000  950000
>> +                               696000  900000
>> +                               600000  850000
>> +                               408000  850000
>> +                               312000  850000
>> +                               216000  850000
>> +                               126000  850000
>> +                       >;
> This doesn't quite match the ordering that Kever put up most recently
> at <https://chromium-review.googlesource.com/#/c/211862/2/arch/arm/boot/dts/rk3288.dtsi>.
> Specifically, he has:
>
> 1800000 1300000
> 1608000 1200000
> 1416000 1150000
> 1200000 1100000
> 1008000 1050000
> [ 816000 1000000
> 600000 900000
> 408000 850000
> 216000 850000
> 126000 850000
Here is the general OPP table for rk3288 we recommend to use in upstream:

    operating-points = <
                 /* KHz    uV */
                 1608000 1350000
                 1512000 1300000
                 1416000 1200000
                 1200000 1100000
                 1008000 1050000
                 816000 1000000
                 696000 950000
                 600000 900000
                 408000 900000
                 312000 900000
                 216000 900000
                 126000 900000
                 >;

After this,
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Note that the CPU can't not stay on top frequency for a long time, the cpu
might overheat, the cpufreq is better to work with cpu thermal for rk3288.

-Kever
FUKAUMI Naoki Sept. 12, 2014, 11:37 a.m. UTC | #4
Hi Kever Yang,

On Fri, Sep 12, 2014 at 4:33 PM, Kever Yang <kever.yang@rock-chips.com> wrote:
> Here is the general OPP table for rk3288 we recommend to use in upstream:
>
>    operating-points = <
>                 /* KHz    uV */
>                 1608000 1350000
>                 1512000 1300000
>                 1416000 1200000
>                 1200000 1100000
>                 1008000 1050000
>                 816000 1000000
>                 696000 950000
>                 600000 900000
>                 408000 900000
>                 312000 900000
>                 216000 900000
>                 126000 900000
>                 >;
>
> After this,
> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
>
> Note that the CPU can't not stay on top frequency for a long time, the cpu
> might overheat, the cpufreq is better to work with cpu thermal for rk3288.

This commit says 1800000 is safe, but actually it's not safe?
 https://bitbucket.org/T-Firefly/firefly-rk3288/commits/7048675eec554a1aa4a3874c7bb24806e1e1c06b/raw/
Kever Yang Sept. 16, 2014, 1:44 a.m. UTC | #5
Hi Naoki FUKAUMI,

On 09/12/2014 07:37 PM, Naoki FUKAUMI wrote:
> Hi Kever Yang,
>
> On Fri, Sep 12, 2014 at 4:33 PM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> Here is the general OPP table for rk3288 we recommend to use in upstream:
>>
>>     operating-points = <
>>                  /* KHz    uV */
>>                  1608000 1350000
>>                  1512000 1300000
>>                  1416000 1200000
>>                  1200000 1100000
>>                  1008000 1050000
>>                  816000 1000000
>>                  696000 950000
>>                  600000 900000
>>                  408000 900000
>>                  312000 900000
>>                  216000 900000
>>                  126000 900000
>>                  >;
>>
>> After this,
>> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
>>
>> Note that the CPU can't not stay on top frequency for a long time, the cpu
>> might overheat, the cpufreq is better to work with cpu thermal for rk3288.
> This commit says 1800000 is safe, but actually it's not safe?
>   https://bitbucket.org/T-Firefly/firefly-rk3288/commits/7048675eec554a1aa4a3874c7bb24806e1e1c06b/raw/
As you have seen, that patch is for a dts file which is board related  
instead of rk3288.dtsi,
it should be safe for T-firefly board, but I'm not sure it works for all 
the boards.

The operation table I provide for rk3288.dtsi with conservative values 
and available for all boards
based on rk3288, and maybe need an OPP table with optimized values in 
dts board file
for board customized.

-Kever
FUKAUMI Naoki Sept. 16, 2014, 5:23 a.m. UTC | #6
Hi,

On Tue, Sep 16, 2014 at 10:44 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> This commit says 1800000 is safe, but actually it's not safe?
>>
>> https://bitbucket.org/T-Firefly/firefly-rk3288/commits/7048675eec554a1aa4a3874c7bb24806e1e1c06b/raw/
>
> As you have seen, that patch is for a dts file which is board related
> instead of rk3288.dtsi,
> it should be safe for T-firefly board, but I'm not sure it works for all the
> boards.
>
> The operation table I provide for rk3288.dtsi with conservative values and
> available for all boards
> based on rk3288, and maybe need an OPP table with optimized values in dts
> board file
> for board customized.

I see, thank you so much.
sorry for the noise.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 879a818..572c30b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -26,11 +26,21 @@ 
 		#size-cells = <0>;
 		enable-method = "rockchip,rk3066-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1008000 1075000
+				 816000 1025000
+				 600000 1025000
+				 504000 1000000
+				 312000  975000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ee801a9..e237216 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -26,11 +26,24 @@ 
 		#size-cells = <0>;
 		enable-method = "rockchip,rk3066-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1608000 1350000
+				1416000 1250000
+				1200000 1150000
+				1008000 1075000
+				 816000  975000
+				 600000  950000
+				 504000  925000
+				 312000  875000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu@1 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5950b0a..9275a47 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -40,10 +40,25 @@ 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@500 {
+		cpu0: cpu@500 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x500>;
+			operating-points = <
+				/* KHz    uV */
+				1416000 1150000
+				1200000 1050000
+				1008000 1000000
+				816000  950000
+				696000  900000
+				600000  850000
+				408000  850000
+				312000  850000
+				216000  850000
+				126000  850000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu@501 {
 			device_type = "cpu";