diff mbox

[1/2] ARM: rockchip: add basic smp support for rk3288

Message ID 1410343554-8383-2-git-send-email-kever.yang@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kever Yang Sept. 10, 2014, 10:05 a.m. UTC
basic rk3288 smp support

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

 arch/arm/mach-rockchip/core.h    |  1 +
 arch/arm/mach-rockchip/platsmp.c | 60 +++++++++++++++++++++++++++++++++++++---
 2 files changed, 57 insertions(+), 4 deletions(-)

Comments

Heiko Stuebner Sept. 10, 2014, 7:17 p.m. UTC | #1
Hi Kever,

Am Mittwoch, 10. September 2014, 18:05:53 schrieb Kever Yang:
> basic rk3288 smp support
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> ---
> 
>  arch/arm/mach-rockchip/core.h    |  1 +
>  arch/arm/mach-rockchip/platsmp.c | 60
> +++++++++++++++++++++++++++++++++++++--- 2 files changed, 57 insertions(+),
> 4 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
> index 39bca96..b2ade69 100644
> --- a/arch/arm/mach-rockchip/core.h
> +++ b/arch/arm/mach-rockchip/core.h
> @@ -18,3 +18,4 @@ extern char rockchip_secondary_trampoline_end;
> 
>  extern unsigned long rockchip_boot_fn;
>  extern void rockchip_secondary_startup(void);
> +extern void secondary_startup(void);
> diff --git a/arch/arm/mach-rockchip/platsmp.c
> b/arch/arm/mach-rockchip/platsmp.c index 189684f..fcd33fd 100644
> --- a/arch/arm/mach-rockchip/platsmp.c
> +++ b/arch/arm/mach-rockchip/platsmp.c
> @@ -77,6 +77,12 @@ static int __cpuinit rockchip_boot_secondary(unsigned int
> cpu, /* start the core */
>  	pmu_set_power_domain(0 + cpu, true);
> 
> +	/* wait for cpu 1~3 bootup and run into wfe state */
> +	udelay(10);
> +	writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
> +	writel(0xDEADBEAF, sram_base_addr + 4);
> +	dsb_sev();
> +

Are you sure this also works on the Cortex-A9, which do share the 
rockchip_boot_secondary function here?

This is also the area where the rk3066/rk3188 put their bringup trampoline, so 
writing new values there might break the code fragment for them.



>  	return 0;
>  }
> 
> @@ -125,7 +131,7 @@ static int __init rockchip_smp_prepare_sram(struct
> device_node *node) return 0;
>  }
> 
> -static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
> +static void __init rk3066_smp_prepare_cpus(unsigned int max_cpus)
>  {
>  	struct device_node *node;
>  	unsigned int i;
> @@ -194,12 +200,58 @@ static void rockchip_cpu_die(unsigned int cpu)
>  }
>  #endif
> 
> -static struct smp_operations rockchip_smp_ops __initdata = {
> -	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
> +static void __init rk3288_smp_prepare_cpus(unsigned int max_cpus)
> +{
> +	struct device_node *node;
> +	unsigned int i;
> +
> +	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
> +	if (!node) {
> +		pr_err("%s: could not find sram dt node\n", __func__);
> +		return;
> +	}
> +
> +	sram_base_addr = of_iomap(node, 0);
> +	if (!sram_base_addr) {
> +		pr_err("%s: could not map pmu registers\n", __func__);
> +		return;
> +	}
> +
> +	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu");
> +	if (!node) {
> +		pr_err("%s: could not find pmu dt node\n", __func__);
> +		return;
> +	}
> +
> +	pmu_base_addr = of_iomap(node, 0);
> +	if (!pmu_base_addr) {
> +		pr_err("%s: could not map pmu registers\n", __func__);
> +		return;
> +	}
> +
> +	ncores = 4;
> +
> +	/* Make sure that all cores except the first are really off */
> +	for (i = 1; i < ncores; i++)
> +		pmu_set_power_domain(0 + i, false);
> +}
> +
> +static struct smp_operations rockchip3066_smp_ops __initdata = {
> +	.smp_prepare_cpus	= rk3066_smp_prepare_cpus,
> +	.smp_boot_secondary	= rockchip_boot_secondary,
> +#ifdef CONFIG_HOTPLUG_CPU
> +	.cpu_kill		= rockchip_cpu_kill,
> +	.cpu_die		= rockchip_cpu_die,
> +#endif
> +};
> +CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp",
> &rockchip3066_smp_ops); +
> +static struct smp_operations rockchip3288_smp_ops __initdata = {
> +	.smp_prepare_cpus	= rk3288_smp_prepare_cpus,
>  	.smp_boot_secondary	= rockchip_boot_secondary,
>  #ifdef CONFIG_HOTPLUG_CPU
>  	.cpu_kill		= rockchip_cpu_kill,
>  	.cpu_die		= rockchip_cpu_die,
>  #endif
>  };
> -CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp",
> &rockchip_smp_ops); +CPU_METHOD_OF_DECLARE(rk3288_smp,
> "rockchip,rk3288-smp", &rockchip3288_smp_ops);
Doug Anderson Sept. 11, 2014, 5:41 p.m. UTC | #2
Kever,

On Wed, Sep 10, 2014 at 3:05 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> -CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
> +CPU_METHOD_OF_DECLARE(rk3288_smp, "rockchip,rk3288-smp", &rockchip3288_smp_ops);

I haven't done a full review, but I think that the above means you
need to update "Documentation/devicetree/bindings/arm/cpus.txt".

-Doug
diff mbox

Patch

diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h
index 39bca96..b2ade69 100644
--- a/arch/arm/mach-rockchip/core.h
+++ b/arch/arm/mach-rockchip/core.h
@@ -18,3 +18,4 @@  extern char rockchip_secondary_trampoline_end;
 
 extern unsigned long rockchip_boot_fn;
 extern void rockchip_secondary_startup(void);
+extern void secondary_startup(void);
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 189684f..fcd33fd 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -77,6 +77,12 @@  static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
 	/* start the core */
 	pmu_set_power_domain(0 + cpu, true);
 
+	/* wait for cpu 1~3 bootup and run into wfe state */
+	udelay(10);
+	writel(virt_to_phys(secondary_startup), sram_base_addr + 8);
+	writel(0xDEADBEAF, sram_base_addr + 4);
+	dsb_sev();
+
 	return 0;
 }
 
@@ -125,7 +131,7 @@  static int __init rockchip_smp_prepare_sram(struct device_node *node)
 	return 0;
 }
 
-static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+static void __init rk3066_smp_prepare_cpus(unsigned int max_cpus)
 {
 	struct device_node *node;
 	unsigned int i;
@@ -194,12 +200,58 @@  static void rockchip_cpu_die(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations rockchip_smp_ops __initdata = {
-	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
+static void __init rk3288_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *node;
+	unsigned int i;
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
+	if (!node) {
+		pr_err("%s: could not find sram dt node\n", __func__);
+		return;
+	}
+
+	sram_base_addr = of_iomap(node, 0);
+	if (!sram_base_addr) {
+		pr_err("%s: could not map pmu registers\n", __func__);
+		return;
+	}
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu");
+	if (!node) {
+		pr_err("%s: could not find pmu dt node\n", __func__);
+		return;
+	}
+
+	pmu_base_addr = of_iomap(node, 0);
+	if (!pmu_base_addr) {
+		pr_err("%s: could not map pmu registers\n", __func__);
+		return;
+	}
+
+	ncores = 4;
+
+	/* Make sure that all cores except the first are really off */
+	for (i = 1; i < ncores; i++)
+		pmu_set_power_domain(0 + i, false);
+}
+
+static struct smp_operations rockchip3066_smp_ops __initdata = {
+	.smp_prepare_cpus	= rk3066_smp_prepare_cpus,
+	.smp_boot_secondary	= rockchip_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= rockchip_cpu_kill,
+	.cpu_die		= rockchip_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip3066_smp_ops);
+
+static struct smp_operations rockchip3288_smp_ops __initdata = {
+	.smp_prepare_cpus	= rk3288_smp_prepare_cpus,
 	.smp_boot_secondary	= rockchip_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= rockchip_cpu_kill,
 	.cpu_die		= rockchip_cpu_die,
 #endif
 };
-CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
+CPU_METHOD_OF_DECLARE(rk3288_smp, "rockchip,rk3288-smp", &rockchip3288_smp_ops);