| Message ID | 1410348691-18317-2-git-send-email-javier.martinez@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Sep 10, 2014 at 01:31:29PM +0200, Javier Martinez Canillas wrote: > From: Sjoerd Simons <sjoerd.simons@collabora.co.uk> > > The Peach Pit board has an Atmel maXTouch trackpad device. > Add the needed Device Tree nodes to support it. > > This Device Tree change is based on the Chrome OS 3.8 tree > but adapted to use the mainline Atmel maXTouch DT binding. > > Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> > Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > > Changes since v3: > - Use KEY_RESERVED even for not reserved pins with a GPIO not hooked. > Suggested by Nick Dyer. > - Add a comment to specify the maXTouch chip version so is more clear. > Suggested by Nick Dyer. > - Omit trailing omit KEY_RESERVED after the GPIO pins. Suggested by Nick Dyer. > > Changes since v2: > - Add spaces around '=' on properties. Suggested by Andreas Faerber. > > Changes since v1: > - Change trackpad IRQ pad function from 0x0 (GPIO input) to 0xf (GPIO IRQ). > suggested by Tomasz Figa. > - Remove BTN_TOOL_* from "linux,gpio-keymap" property since those are set > by input mt core if INPUT_MT_POINTER is set. Suggested by Nick Dyer. > - Use correct values for "linux,gpio-keymap" property. Suggested by Nick Dyer. > - Remove support for Peach Pi board since it uses a different Atmel touchpad > that requires an Atmel object protocol (T100) not supported by the driver. > - Use IRQ type constants from <dt-bindings/interrupt-controller/irq.h> instead > of magic numbers. Suggested by Andreas Faerber. > > arch/arm/boot/dts/exynos5420-peach-pit.dts | 29 +++++++++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts > index f247709..ad56d4c 100644 > --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts > +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts > @@ -507,6 +507,28 @@ > }; > }; > > +&hsi2c_8 { > + status = "okay"; > + clock-frequency = <333000>; > + > + /* Atmel mXT336S */ > + trackpad@4b { > + compatible = "atmel,maxtouch"; > + reg = <0x4b>; > + interrupt-parent = <&gpx1>; > + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; > + wakeup-source; > + pinctrl-names = "default"; > + pinctrl-0 = <&trackpad_irq>; > + linux,gpio-keymap = <KEY_RESERVED > + KEY_RESERVED > + KEY_RESERVED /* GPIO0 */ > + KEY_RESERVED /* GPIO1 */ > + KEY_RESERVED /* GPIO2 */ > + BTN_LEFT>; /* GPIO3 */ Seems like a single space sneaked between the semicolon and the tab. Maybe whoever applies could squash it. Thanks.
Hello Dmitry, On 09/11/2014 12:25 AM, Dmitry Torokhov wrote: >> >> +&hsi2c_8 { >> + status = "okay"; >> + clock-frequency = <333000>; >> + >> + /* Atmel mXT336S */ >> + trackpad@4b { >> + compatible = "atmel,maxtouch"; >> + reg = <0x4b>; >> + interrupt-parent = <&gpx1>; >> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; >> + wakeup-source; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&trackpad_irq>; >> + linux,gpio-keymap = <KEY_RESERVED >> + KEY_RESERVED >> + KEY_RESERVED /* GPIO0 */ >> + KEY_RESERVED /* GPIO1 */ >> + KEY_RESERVED /* GPIO2 */ >> + BTN_LEFT>; /* GPIO3 */ > > Seems like a single space sneaked between the semicolon and the tab. > Maybe whoever applies could squash it. > Right, I set c-default-style to "linux" on Emacs but seems it gets confused sometimes when editing Device Tree source files. Sorry about that. Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/11/14 18:44, Javier Martinez Canillas wrote: > Hello Dmitry, > Hi, > On 09/11/2014 12:25 AM, Dmitry Torokhov wrote: >>> >>> +&hsi2c_8 { >>> + status = "okay"; >>> + clock-frequency =<333000>; >>> + >>> + /* Atmel mXT336S */ >>> + trackpad@4b { >>> + compatible = "atmel,maxtouch"; >>> + reg =<0x4b>; >>> + interrupt-parent =<&gpx1>; >>> + interrupts =<1 IRQ_TYPE_EDGE_FALLING>; >>> + wakeup-source; >>> + pinctrl-names = "default"; >>> + pinctrl-0 =<&trackpad_irq>; >>> + linux,gpio-keymap =<KEY_RESERVED >>> + KEY_RESERVED >>> + KEY_RESERVED /* GPIO0 */ >>> + KEY_RESERVED /* GPIO1 */ >>> + KEY_RESERVED /* GPIO2 */ >>> + BTN_LEFT>; /* GPIO3 */ >> >> Seems like a single space sneaked between the semicolon and the tab. >> Maybe whoever applies could squash it. >> > > Right, I set c-default-style to "linux" on Emacs but seems it gets confused > sometimes when editing Device Tree source files. Sorry about that. > Applied this whole series with fixing a white space Dmitry commented. Note, I will handle all of exynos_defconfig changes separately. Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f247709..ad56d4c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -507,6 +507,28 @@ }; }; +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + + /* Atmel mXT336S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO0 */ + KEY_RESERVED /* GPIO1 */ + KEY_RESERVED /* GPIO2 */ + BTN_LEFT>; /* GPIO3 */ + }; +}; + &hsi2c_9 { status = "okay"; clock-frequency = <400000>; @@ -591,6 +613,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>;