Message ID | 1410444665-24492-1-git-send-email-sr@denx.de (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 11 September 2014 16:11, Stefan Roese <sr@denx.de> wrote: > From: Thorsten Einsbein <thorsten.eisbein@head-acoustics.de> > > On the TAO3530 (OMAP3530 based) we noticed that some SD cards are not > detected reliably upon bootup (timeout). Especially the SanDisk Ultra > 8GiB seems to be problematic here. The SanDisk Extreme also has this > problem on this platform, but not that often. A Samsung 8 GiB type 6 > doesn't show this problem at all. > > This patch now adds a short delay after enabling the power on the slot. > With this delay all cards are detected reliably. Is this delay related to regulator ramp up/down time? Then I think it maybe should be a part of the regulator code/DT. Kind regards Uffe > > Signed-off-by: Thorsten Einsbein <thorsten.eisbein@head-acoustics.de> > Signed-off-by: Stefan Roese <sr@denx.de> > Cc: Ulf Hansson <ulf.hansson@linaro.org> > Cc: Balaji T K <balajitk@ti.com> > --- > drivers/mmc/host/omap_hsmmc.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index 9656726..62ff0a7 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -335,6 +335,10 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, > ret = mmc_regulator_set_ocr(host->mmc, > host->vcc, 0); > } > + > + dev_dbg(host->dev, "omap_hsmmc_set_power: wait a little (slot %d)\n", > + slot); > + msleep(5); > } else { > /* Shut down the rail */ > if (host->vcc_aux) > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11.09.2014 16:15, Ulf Hansson wrote: > On 11 September 2014 16:11, Stefan Roese <sr@denx.de> wrote: >> From: Thorsten Einsbein <thorsten.eisbein@head-acoustics.de> >> >> On the TAO3530 (OMAP3530 based) we noticed that some SD cards are not >> detected reliably upon bootup (timeout). Especially the SanDisk Ultra >> 8GiB seems to be problematic here. The SanDisk Extreme also has this >> problem on this platform, but not that often. A Samsung 8 GiB type 6 >> doesn't show this problem at all. >> >> This patch now adds a short delay after enabling the power on the slot. >> With this delay all cards are detected reliably. > > Is this delay related to regulator ramp up/down time? Then I think it > maybe should be a part of the regulator code/DT. Thanks for this feedback. Yes, adding "regulator-enable-ramp-delay" to the regulator(s) solves this issue too. I wasn't aware of that one. The patch can be dropped. Thanks, Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 9656726..62ff0a7 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -335,6 +335,10 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0); } + + dev_dbg(host->dev, "omap_hsmmc_set_power: wait a little (slot %d)\n", + slot); + msleep(5); } else { /* Shut down the rail */ if (host->vcc_aux)