Message ID | 1410843726-4235-1-git-send-email-gautam.vivek@samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tuesday 16 September 2014 10:32 AM, Vivek Gautam wrote: > Currently the DP_PHY_ENABLE register is mapped in the driver, > and accessed to control power to the PHY. > With mfd-syscon and regmap interface available at our disposal, > it's wise to use that instead of using a 'reg' property for the > controller and allocating a memory resource for that. > > To facilitate this, we have added another compatible string > for Exynso5420 SoC to acquire driver data which contains > different DP-PHY-CONTROL register offset. > > Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> > Cc: Jingoo Han <jg1.han@samsung.com> > Cc: Kishon Vijay Abraham I <kishon@ti.com> Taking this in linux-phy tree. If someone has already taken this patch, please let me know. Thanks Kishon > --- > > Changes since v2: > - Using 'EXYNOS5_PHY_ENABLE' macro instead of 'EXYNOS_DPTX_PHY_ENABLE' > since that's available with us in "linux/mfd/syscon/exynos5-pmu.h" file. > > Changes since v1: > - state->regs should have been "struct regmap *" instead of > "void __iomem *". So corrected the same. > > .../devicetree/bindings/phy/samsung-phy.txt | 7 +- > drivers/phy/phy-exynos-dp-video.c | 79 +++++++++++++------- > 2 files changed, 59 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt > index 7a6feea..15e0f2c 100644 > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > @@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY > ------------------------------------------------- > > Required properties: > -- compatible : should be "samsung,exynos5250-dp-video-phy"; > -- reg : offset and length of the Display Port PHY register set; > +- compatible : should be one of the following supported values: > + - "samsung,exynos5250-dp-video-phy" > + - "samsung,exynos5420-dp-video-phy" > +- samsung,pmu-syscon: phandle for PMU system controller interface, used to > + control pmu registers for power isolation. > - #phy-cells : from the generic PHY bindings, must be 0; > > Samsung S5P/EXYNOS SoC series USB PHY > diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c > index 8b3026e..53f44a0 100644 > --- a/drivers/phy/phy-exynos-dp-video.c > +++ b/drivers/phy/phy-exynos-dp-video.c > @@ -13,44 +13,55 @@ > #include <linux/io.h> > #include <linux/kernel.h> > #include <linux/module.h> > +#include <linux/mfd/syscon.h> > +#include <linux/mfd/syscon/exynos5-pmu.h> > #include <linux/of.h> > #include <linux/of_address.h> > #include <linux/phy/phy.h> > #include <linux/platform_device.h> > +#include <linux/regmap.h> > > -/* DPTX_PHY_CONTROL register */ > -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) > +struct exynos_dp_video_phy_drvdata { > + u32 phy_ctrl_offset; > +}; > > struct exynos_dp_video_phy { > - void __iomem *regs; > + struct regmap *regs; > + const struct exynos_dp_video_phy_drvdata *drvdata; > }; > > -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) > +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state, > + unsigned int on) > { > - u32 reg; > + unsigned int val; > + > + if (IS_ERR(state->regs)) > + return; > > - reg = readl(state->regs); > - if (on) > - reg |= EXYNOS_DPTX_PHY_ENABLE; > - else > - reg &= ~EXYNOS_DPTX_PHY_ENABLE; > - writel(reg, state->regs); > + val = on ? 0 : EXYNOS5_PHY_ENABLE; > > - return 0; > + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, > + EXYNOS5_PHY_ENABLE, val); > } > > static int exynos_dp_video_phy_power_on(struct phy *phy) > { > struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > - return __set_phy_state(state, 1); > + /* Disable power isolation on DP-PHY */ > + exynos_dp_video_phy_pwr_isol(state, 0); > + > + return 0; > } > > static int exynos_dp_video_phy_power_off(struct phy *phy) > { > struct exynos_dp_video_phy *state = phy_get_drvdata(phy); > > - return __set_phy_state(state, 0); > + /* Enable power isolation on DP-PHY */ > + exynos_dp_video_phy_pwr_isol(state, 1); > + > + return 0; > } > > static struct phy_ops exynos_dp_video_phy_ops = { > @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = { > .owner = THIS_MODULE, > }; > > +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { > + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, > +}; > + > +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { > + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, > +}; > + > +static const struct of_device_id exynos_dp_video_phy_of_match[] = { > + { > + .compatible = "samsung,exynos5250-dp-video-phy", > + .data = &exynos5250_dp_video_phy, > + }, { > + .compatible = "samsung,exynos5420-dp-video-phy", > + .data = &exynos5420_dp_video_phy, > + }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); > + > static int exynos_dp_video_phy_probe(struct platform_device *pdev) > { > struct exynos_dp_video_phy *state; > struct device *dev = &pdev->dev; > - struct resource *res; > + const struct of_device_id *match; > struct phy_provider *phy_provider; > struct phy *phy; > > @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) > if (!state) > return -ENOMEM; > > - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - > - state->regs = devm_ioremap_resource(dev, res); > - if (IS_ERR(state->regs)) > + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, > + "samsung,pmu-syscon"); > + if (IS_ERR(state->regs)) { > + dev_err(dev, "Failed to lookup PMU regmap\n"); > return PTR_ERR(state->regs); > + } > + > + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); > + state->drvdata = match->data; > > phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL); > if (IS_ERR(phy)) { > @@ -89,12 +124,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) > return PTR_ERR_OR_ZERO(phy_provider); > } > > -static const struct of_device_id exynos_dp_video_phy_of_match[] = { > - { .compatible = "samsung,exynos5250-dp-video-phy" }, > - { }, > -}; > -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); > - > static struct platform_driver exynos_dp_video_phy_driver = { > .probe = exynos_dp_video_phy_probe, > .driver = { >
Hi Kishon, On Wed, Sep 17, 2014 at 10:24 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote: > > > On Tuesday 16 September 2014 10:32 AM, Vivek Gautam wrote: >> Currently the DP_PHY_ENABLE register is mapped in the driver, >> and accessed to control power to the PHY. >> With mfd-syscon and regmap interface available at our disposal, >> it's wise to use that instead of using a 'reg' property for the >> controller and allocating a memory resource for that. >> >> To facilitate this, we have added another compatible string >> for Exynso5420 SoC to acquire driver data which contains >> different DP-PHY-CONTROL register offset. >> >> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >> Cc: Jingoo Han <jg1.han@samsung.com> >> Cc: Kishon Vijay Abraham I <kishon@ti.com> > > Taking this in linux-phy tree. If someone has already taken this patch, please > let me know. Thanks for taking this. But just one check, i think i need to separate out the Documentation to a separate patch even before this driver patch. Isn't it ? > > Thanks > Kishon > >> --- >> >> Changes since v2: >> - Using 'EXYNOS5_PHY_ENABLE' macro instead of 'EXYNOS_DPTX_PHY_ENABLE' >> since that's available with us in "linux/mfd/syscon/exynos5-pmu.h" file. >> >> Changes since v1: >> - state->regs should have been "struct regmap *" instead of >> "void __iomem *". So corrected the same. >> >> .../devicetree/bindings/phy/samsung-phy.txt | 7 +- >> drivers/phy/phy-exynos-dp-video.c | 79 +++++++++++++------- >> 2 files changed, 59 insertions(+), 27 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt >> index 7a6feea..15e0f2c 100644 >> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt >> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt >> @@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY >> ------------------------------------------------- >> >> Required properties: >> -- compatible : should be "samsung,exynos5250-dp-video-phy"; >> -- reg : offset and length of the Display Port PHY register set; >> +- compatible : should be one of the following supported values: >> + - "samsung,exynos5250-dp-video-phy" >> + - "samsung,exynos5420-dp-video-phy" >> +- samsung,pmu-syscon: phandle for PMU system controller interface, used to >> + control pmu registers for power isolation. >> - #phy-cells : from the generic PHY bindings, must be 0; >> >> Samsung S5P/EXYNOS SoC series USB PHY >> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c >> index 8b3026e..53f44a0 100644 >> --- a/drivers/phy/phy-exynos-dp-video.c >> +++ b/drivers/phy/phy-exynos-dp-video.c >> @@ -13,44 +13,55 @@ >> #include <linux/io.h> >> #include <linux/kernel.h> >> #include <linux/module.h> >> +#include <linux/mfd/syscon.h> >> +#include <linux/mfd/syscon/exynos5-pmu.h> >> #include <linux/of.h> >> #include <linux/of_address.h> >> #include <linux/phy/phy.h> >> #include <linux/platform_device.h> >> +#include <linux/regmap.h> >> >> -/* DPTX_PHY_CONTROL register */ >> -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) >> +struct exynos_dp_video_phy_drvdata { >> + u32 phy_ctrl_offset; >> +}; >> >> struct exynos_dp_video_phy { >> - void __iomem *regs; >> + struct regmap *regs; >> + const struct exynos_dp_video_phy_drvdata *drvdata; >> }; >> >> -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) >> +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state, >> + unsigned int on) >> { >> - u32 reg; >> + unsigned int val; >> + >> + if (IS_ERR(state->regs)) >> + return; >> >> - reg = readl(state->regs); >> - if (on) >> - reg |= EXYNOS_DPTX_PHY_ENABLE; >> - else >> - reg &= ~EXYNOS_DPTX_PHY_ENABLE; >> - writel(reg, state->regs); >> + val = on ? 0 : EXYNOS5_PHY_ENABLE; >> >> - return 0; >> + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, >> + EXYNOS5_PHY_ENABLE, val); >> } >> >> static int exynos_dp_video_phy_power_on(struct phy *phy) >> { >> struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >> >> - return __set_phy_state(state, 1); >> + /* Disable power isolation on DP-PHY */ >> + exynos_dp_video_phy_pwr_isol(state, 0); >> + >> + return 0; >> } >> >> static int exynos_dp_video_phy_power_off(struct phy *phy) >> { >> struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >> >> - return __set_phy_state(state, 0); >> + /* Enable power isolation on DP-PHY */ >> + exynos_dp_video_phy_pwr_isol(state, 1); >> + >> + return 0; >> } >> >> static struct phy_ops exynos_dp_video_phy_ops = { >> @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = { >> .owner = THIS_MODULE, >> }; >> >> +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { >> + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, >> +}; >> + >> +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { >> + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, >> +}; >> + >> +static const struct of_device_id exynos_dp_video_phy_of_match[] = { >> + { >> + .compatible = "samsung,exynos5250-dp-video-phy", >> + .data = &exynos5250_dp_video_phy, >> + }, { >> + .compatible = "samsung,exynos5420-dp-video-phy", >> + .data = &exynos5420_dp_video_phy, >> + }, >> + { }, >> +}; >> +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); >> + >> static int exynos_dp_video_phy_probe(struct platform_device *pdev) >> { >> struct exynos_dp_video_phy *state; >> struct device *dev = &pdev->dev; >> - struct resource *res; >> + const struct of_device_id *match; >> struct phy_provider *phy_provider; >> struct phy *phy; >> >> @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) >> if (!state) >> return -ENOMEM; >> >> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> - >> - state->regs = devm_ioremap_resource(dev, res); >> - if (IS_ERR(state->regs)) >> + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, >> + "samsung,pmu-syscon"); >> + if (IS_ERR(state->regs)) { >> + dev_err(dev, "Failed to lookup PMU regmap\n"); >> return PTR_ERR(state->regs); >> + } >> + >> + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); >> + state->drvdata = match->data; >> >> phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL); >> if (IS_ERR(phy)) { >> @@ -89,12 +124,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) >> return PTR_ERR_OR_ZERO(phy_provider); >> } >> >> -static const struct of_device_id exynos_dp_video_phy_of_match[] = { >> - { .compatible = "samsung,exynos5250-dp-video-phy" }, >> - { }, >> -}; >> -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); >> - >> static struct platform_driver exynos_dp_video_phy_driver = { >> .probe = exynos_dp_video_phy_probe, >> .driver = { >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 18 September 2014 08:55 AM, Vivek Gautam wrote: > Hi Kishon, > > > On Wed, Sep 17, 2014 at 10:24 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote: >> >> >> On Tuesday 16 September 2014 10:32 AM, Vivek Gautam wrote: >>> Currently the DP_PHY_ENABLE register is mapped in the driver, >>> and accessed to control power to the PHY. >>> With mfd-syscon and regmap interface available at our disposal, >>> it's wise to use that instead of using a 'reg' property for the >>> controller and allocating a memory resource for that. >>> >>> To facilitate this, we have added another compatible string >>> for Exynso5420 SoC to acquire driver data which contains >>> different DP-PHY-CONTROL register offset. >>> >>> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> >>> Cc: Jingoo Han <jg1.han@samsung.com> >>> Cc: Kishon Vijay Abraham I <kishon@ti.com> >> >> Taking this in linux-phy tree. If someone has already taken this patch, please >> let me know. > > Thanks for taking this. But just one check, i think i need to separate > out the Documentation > to a separate patch even before this driver patch. Isn't it ? no.. that's alright. Thanks Kishon > >> >> Thanks >> Kishon >> >>> --- >>> >>> Changes since v2: >>> - Using 'EXYNOS5_PHY_ENABLE' macro instead of 'EXYNOS_DPTX_PHY_ENABLE' >>> since that's available with us in "linux/mfd/syscon/exynos5-pmu.h" file. >>> >>> Changes since v1: >>> - state->regs should have been "struct regmap *" instead of >>> "void __iomem *". So corrected the same. >>> >>> .../devicetree/bindings/phy/samsung-phy.txt | 7 +- >>> drivers/phy/phy-exynos-dp-video.c | 79 +++++++++++++------- >>> 2 files changed, 59 insertions(+), 27 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> index 7a6feea..15e0f2c 100644 >>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt >>> @@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY >>> ------------------------------------------------- >>> >>> Required properties: >>> -- compatible : should be "samsung,exynos5250-dp-video-phy"; >>> -- reg : offset and length of the Display Port PHY register set; >>> +- compatible : should be one of the following supported values: >>> + - "samsung,exynos5250-dp-video-phy" >>> + - "samsung,exynos5420-dp-video-phy" >>> +- samsung,pmu-syscon: phandle for PMU system controller interface, used to >>> + control pmu registers for power isolation. >>> - #phy-cells : from the generic PHY bindings, must be 0; >>> >>> Samsung S5P/EXYNOS SoC series USB PHY >>> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c >>> index 8b3026e..53f44a0 100644 >>> --- a/drivers/phy/phy-exynos-dp-video.c >>> +++ b/drivers/phy/phy-exynos-dp-video.c >>> @@ -13,44 +13,55 @@ >>> #include <linux/io.h> >>> #include <linux/kernel.h> >>> #include <linux/module.h> >>> +#include <linux/mfd/syscon.h> >>> +#include <linux/mfd/syscon/exynos5-pmu.h> >>> #include <linux/of.h> >>> #include <linux/of_address.h> >>> #include <linux/phy/phy.h> >>> #include <linux/platform_device.h> >>> +#include <linux/regmap.h> >>> >>> -/* DPTX_PHY_CONTROL register */ >>> -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) >>> +struct exynos_dp_video_phy_drvdata { >>> + u32 phy_ctrl_offset; >>> +}; >>> >>> struct exynos_dp_video_phy { >>> - void __iomem *regs; >>> + struct regmap *regs; >>> + const struct exynos_dp_video_phy_drvdata *drvdata; >>> }; >>> >>> -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) >>> +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state, >>> + unsigned int on) >>> { >>> - u32 reg; >>> + unsigned int val; >>> + >>> + if (IS_ERR(state->regs)) >>> + return; >>> >>> - reg = readl(state->regs); >>> - if (on) >>> - reg |= EXYNOS_DPTX_PHY_ENABLE; >>> - else >>> - reg &= ~EXYNOS_DPTX_PHY_ENABLE; >>> - writel(reg, state->regs); >>> + val = on ? 0 : EXYNOS5_PHY_ENABLE; >>> >>> - return 0; >>> + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, >>> + EXYNOS5_PHY_ENABLE, val); >>> } >>> >>> static int exynos_dp_video_phy_power_on(struct phy *phy) >>> { >>> struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >>> >>> - return __set_phy_state(state, 1); >>> + /* Disable power isolation on DP-PHY */ >>> + exynos_dp_video_phy_pwr_isol(state, 0); >>> + >>> + return 0; >>> } >>> >>> static int exynos_dp_video_phy_power_off(struct phy *phy) >>> { >>> struct exynos_dp_video_phy *state = phy_get_drvdata(phy); >>> >>> - return __set_phy_state(state, 0); >>> + /* Enable power isolation on DP-PHY */ >>> + exynos_dp_video_phy_pwr_isol(state, 1); >>> + >>> + return 0; >>> } >>> >>> static struct phy_ops exynos_dp_video_phy_ops = { >>> @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = { >>> .owner = THIS_MODULE, >>> }; >>> >>> +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { >>> + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, >>> +}; >>> + >>> +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { >>> + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, >>> +}; >>> + >>> +static const struct of_device_id exynos_dp_video_phy_of_match[] = { >>> + { >>> + .compatible = "samsung,exynos5250-dp-video-phy", >>> + .data = &exynos5250_dp_video_phy, >>> + }, { >>> + .compatible = "samsung,exynos5420-dp-video-phy", >>> + .data = &exynos5420_dp_video_phy, >>> + }, >>> + { }, >>> +}; >>> +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); >>> + >>> static int exynos_dp_video_phy_probe(struct platform_device *pdev) >>> { >>> struct exynos_dp_video_phy *state; >>> struct device *dev = &pdev->dev; >>> - struct resource *res; >>> + const struct of_device_id *match; >>> struct phy_provider *phy_provider; >>> struct phy *phy; >>> >>> @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) >>> if (!state) >>> return -ENOMEM; >>> >>> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> - >>> - state->regs = devm_ioremap_resource(dev, res); >>> - if (IS_ERR(state->regs)) >>> + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, >>> + "samsung,pmu-syscon"); >>> + if (IS_ERR(state->regs)) { >>> + dev_err(dev, "Failed to lookup PMU regmap\n"); >>> return PTR_ERR(state->regs); >>> + } >>> + >>> + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); >>> + state->drvdata = match->data; >>> >>> phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL); >>> if (IS_ERR(phy)) { >>> @@ -89,12 +124,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) >>> return PTR_ERR_OR_ZERO(phy_provider); >>> } >>> >>> -static const struct of_device_id exynos_dp_video_phy_of_match[] = { >>> - { .compatible = "samsung,exynos5250-dp-video-phy" }, >>> - { }, >>> -}; >>> -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); >>> - >>> static struct platform_driver exynos_dp_video_phy_driver = { >>> .probe = exynos_dp_video_phy_probe, >>> .driver = { >>> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > >
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 7a6feea..15e0f2c 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY ------------------------------------------------- Required properties: -- compatible : should be "samsung,exynos5250-dp-video-phy"; -- reg : offset and length of the Display Port PHY register set; +- compatible : should be one of the following supported values: + - "samsung,exynos5250-dp-video-phy" + - "samsung,exynos5420-dp-video-phy" +- samsung,pmu-syscon: phandle for PMU system controller interface, used to + control pmu registers for power isolation. - #phy-cells : from the generic PHY bindings, must be 0; Samsung S5P/EXYNOS SoC series USB PHY diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c index 8b3026e..53f44a0 100644 --- a/drivers/phy/phy-exynos-dp-video.c +++ b/drivers/phy/phy-exynos-dp-video.c @@ -13,44 +13,55 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> -/* DPTX_PHY_CONTROL register */ -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) +struct exynos_dp_video_phy_drvdata { + u32 phy_ctrl_offset; +}; struct exynos_dp_video_phy { - void __iomem *regs; + struct regmap *regs; + const struct exynos_dp_video_phy_drvdata *drvdata; }; -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state, + unsigned int on) { - u32 reg; + unsigned int val; + + if (IS_ERR(state->regs)) + return; - reg = readl(state->regs); - if (on) - reg |= EXYNOS_DPTX_PHY_ENABLE; - else - reg &= ~EXYNOS_DPTX_PHY_ENABLE; - writel(reg, state->regs); + val = on ? 0 : EXYNOS5_PHY_ENABLE; - return 0; + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS5_PHY_ENABLE, val); } static int exynos_dp_video_phy_power_on(struct phy *phy) { struct exynos_dp_video_phy *state = phy_get_drvdata(phy); - return __set_phy_state(state, 1); + /* Disable power isolation on DP-PHY */ + exynos_dp_video_phy_pwr_isol(state, 0); + + return 0; } static int exynos_dp_video_phy_power_off(struct phy *phy) { struct exynos_dp_video_phy *state = phy_get_drvdata(phy); - return __set_phy_state(state, 0); + /* Enable power isolation on DP-PHY */ + exynos_dp_video_phy_pwr_isol(state, 1); + + return 0; } static struct phy_ops exynos_dp_video_phy_ops = { @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = { .owner = THIS_MODULE, }; +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, +}; + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-dp-video-phy", + .data = &exynos5250_dp_video_phy, + }, { + .compatible = "samsung,exynos5420-dp-video-phy", + .data = &exynos5420_dp_video_phy, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + static int exynos_dp_video_phy_probe(struct platform_device *pdev) { struct exynos_dp_video_phy *state; struct device *dev = &pdev->dev; - struct resource *res; + const struct of_device_id *match; struct phy_provider *phy_provider; struct phy *phy; @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) if (!state) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - state->regs = devm_ioremap_resource(dev, res); - if (IS_ERR(state->regs)) + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(state->regs)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); return PTR_ERR(state->regs); + } + + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); + state->drvdata = match->data; phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL); if (IS_ERR(phy)) { @@ -89,12 +124,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } -static const struct of_device_id exynos_dp_video_phy_of_match[] = { - { .compatible = "samsung,exynos5250-dp-video-phy" }, - { }, -}; -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); - static struct platform_driver exynos_dp_video_phy_driver = { .probe = exynos_dp_video_phy_probe, .driver = {
Currently the DP_PHY_ENABLE register is mapped in the driver, and accessed to control power to the PHY. With mfd-syscon and regmap interface available at our disposal, it's wise to use that instead of using a 'reg' property for the controller and allocating a memory resource for that. To facilitate this, we have added another compatible string for Exynso5420 SoC to acquire driver data which contains different DP-PHY-CONTROL register offset. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> --- Changes since v2: - Using 'EXYNOS5_PHY_ENABLE' macro instead of 'EXYNOS_DPTX_PHY_ENABLE' since that's available with us in "linux/mfd/syscon/exynos5-pmu.h" file. Changes since v1: - state->regs should have been "struct regmap *" instead of "void __iomem *". So corrected the same. .../devicetree/bindings/phy/samsung-phy.txt | 7 +- drivers/phy/phy-exynos-dp-video.c | 79 +++++++++++++------- 2 files changed, 59 insertions(+), 27 deletions(-)