diff mbox

[v4] mfd: syscon: Decouple syscon interface from platform devices

Message ID 1411132009-11173-1-git-send-email-pankaj.dubey@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Pankaj Dubey Sept. 19, 2014, 1:06 p.m. UTC
Currently a syscon entity can be only registered directly through a
platform device that binds to a dedicated syscon driver. However in
certain use cases it is desirable to make a device used with another
driver a syscon interface provider.

For example, certain SoCs (e.g. Exynos) contain system controller
blocks which perform various functions such as power domain control,
CPU power management, low power mode control, but in addition contain
certain IP integration glue, such as various signal masks,
coprocessor power control, etc. In such case, there is a need to have
a dedicated driver for such system controller but also share registers
with other drivers. The latter is where the syscon interface is helpful.

In case of DT based platforms, this patch decouples syscon object from
syscon platform driver, and allows to create syscon objects first time
when it is required by calling of syscon_regmap_lookup_by APIs and keep
a list of such syscon objects along with syscon provider device_nodes
and regmap handles.

For non-DT based platforms, this patch keeps syscon platform driver
structure where is can be probed and such non-DT based drivers can use
syscon_regmap_lookup_by_pdev API and get access to regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completly remove platform driver of syscon, and keep only helper
functions to get regmap handles.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
Changes since v3:
 - Addressed Arnd's comment for v2.
 - Updated of_syscon_register for adding dev pointer in regmap_init_mmio.
 - For early users created dummy platform device.
   
Changes since v2:
 - Added back platform device support from syscon, with one change that
   syscon will not be probed for DT based platform.
 - Added back syscon_regmap_lookup_by_pdevname API so that non-DT base
   users of syscon will not be broken.
 - Removed unwanted change in syscon.h.
 - Modified Signed-off-by list, added Suggested-by of Tomasz Figa and
   Arnd Bergmann.
 - Added Tested-by of Vivek Gautam for testing on Exynos platform.

Changes since v1:
 - Removed of_syscon_unregister function.
 - Modified of_syscon_register function and it will be used by syscon.c
   to create syscon objects whenever required.
 - Removed platform device support from syscon.
 - Removed syscon_regmap_lookup_by_pdevname API support.
 - As there are significant changes w.r.t patchset v1, I am taking over
   author for this patchset from Tomasz Figa.

[1]: https://lkml.org/lkml/2014/9/2/299
 drivers/mfd/syscon.c |  102 ++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 79 insertions(+), 23 deletions(-)

Comments

Javier Martinez Canillas Sept. 19, 2014, 2:18 p.m. UTC | #1
Hello Pankaj,

On Fri, Sep 19, 2014 at 3:06 PM, Pankaj Dubey <pankaj.dubey@samsung.com> wrote:
> Currently a syscon entity can be only registered directly through a
> platform device that binds to a dedicated syscon driver. However in
> certain use cases it is desirable to make a device used with another
> driver a syscon interface provider.
>
> For example, certain SoCs (e.g. Exynos) contain system controller
> blocks which perform various functions such as power domain control,
> CPU power management, low power mode control, but in addition contain
> certain IP integration glue, such as various signal masks,
> coprocessor power control, etc. In such case, there is a need to have
> a dedicated driver for such system controller but also share registers
> with other drivers. The latter is where the syscon interface is helpful.
>
> In case of DT based platforms, this patch decouples syscon object from
> syscon platform driver, and allows to create syscon objects first time
> when it is required by calling of syscon_regmap_lookup_by APIs and keep
> a list of such syscon objects along with syscon provider device_nodes
> and regmap handles.
>
> For non-DT based platforms, this patch keeps syscon platform driver
> structure where is can be probed and such non-DT based drivers can use
> syscon_regmap_lookup_by_pdev API and get access to regmap handles.
> Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
> we can completly remove platform driver of syscon, and keep only helper
> functions to get regmap handles.
>
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
> ---
> Changes since v3:
>  - Addressed Arnd's comment for v2.
>  - Updated of_syscon_register for adding dev pointer in regmap_init_mmio.
>  - For early users created dummy platform device.
>
> Changes since v2:
>  - Added back platform device support from syscon, with one change that
>    syscon will not be probed for DT based platform.
>  - Added back syscon_regmap_lookup_by_pdevname API so that non-DT base
>    users of syscon will not be broken.
>  - Removed unwanted change in syscon.h.
>  - Modified Signed-off-by list, added Suggested-by of Tomasz Figa and
>    Arnd Bergmann.
>  - Added Tested-by of Vivek Gautam for testing on Exynos platform.
>
> Changes since v1:
>  - Removed of_syscon_unregister function.
>  - Modified of_syscon_register function and it will be used by syscon.c
>    to create syscon objects whenever required.
>  - Removed platform device support from syscon.
>  - Removed syscon_regmap_lookup_by_pdevname API support.
>  - As there are significant changes w.r.t patchset v1, I am taking over
>    author for this patchset from Tomasz Figa.
>
> [1]: https://lkml.org/lkml/2014/9/2/299
>  drivers/mfd/syscon.c |  102 ++++++++++++++++++++++++++++++++++++++------------
>  1 file changed, 79 insertions(+), 23 deletions(-)
>

I tested this patch on an Exynos5420 Peach Pit Chromebook and I see
that of_syscon_register() is called for the PMU system controller with
compatible string "samsung,exynos5420-pmu", "syscon" which does not
have a dedicated platform driver, so:

Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier
Tomasz Figa Sept. 19, 2014, 3:11 p.m. UTC | #2
Hi Pankaj,

Please see my comments inline.

On 19.09.2014 15:06, Pankaj Dubey wrote:
> Currently a syscon entity can be only registered directly through a
> platform device that binds to a dedicated syscon driver. However in
> certain use cases it is desirable to make a device used with another
> driver a syscon interface provider.

[snip]

> -static int syscon_match_node(struct device *dev, void *data)
> +static struct syscon *of_syscon_register(struct device_node *np)
>  {
> -	struct device_node *dn = data;
> +	struct platform_device *pdev = NULL;
> +	struct syscon *syscon;
> +	struct regmap *regmap;
> +	void __iomem *base;
> +
> +

nit: Stray blank line.

> +	if (!of_device_is_compatible(np, "syscon"))
> +		return ERR_PTR(-EINVAL);

I don't think this check is needed at all. I'd say that drivers should
be free to register a syscon provider for any node.

> +
> +	syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
> +	if (!syscon)
> +		return ERR_PTR(-ENOMEM);
> +
> +	base = of_iomap(np, 0);
> +	if (!base)
> +		return ERR_PTR(-ENOMEM);
> +
> +	if (!of_device_is_available(np) ||

Wouldn't it be enough to simply call of_find_device_by_node(np) and if
it fails then instead create a dummy device?

> +			of_node_test_and_set_flag(np, OF_POPULATED)) {
> +		/* if device is already populated and avaiable then use it */
> +		pdev = of_find_device_by_node(np);
> +		if (!(&pdev->dev))

This is just plain wrong, because this condition will always evaluate to
true (see the definition of struct platform_device). Shouldn't you
rather just check the pdev pointer?

> +			return ERR_PTR(-ENODEV);
> +
> +	} else {
> +		/* for early users create dummy syscon device and use it */
> +		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
> +		if (!pdev)
> +			return ERR_PTR(-ENOMEM);

Any clean-up on error path?

> +
> +		pdev->name = "dummy-syscon";
> +		pdev->id = -1;

Wouldn't you get an ID collision if more than one syscon is registered
early? Maybe the naming scheme from of_device_alloc() could be adopted
partially?

> +		device_initialize(&pdev->dev);

I wonder if you couldn't simply reuse platform_device_alloc() for all of
this, except the line below, which would still have to be handled
separately.

> +		pdev->dev.of_node = np;
> +	}
> +
> +	regmap = regmap_init_mmio(&pdev->dev, base, &syscon_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		pr_err("regmap init failed\n");

If you have a dev here then you should be able to use dev_err() already.

> +		return ERR_CAST(regmap);
> +	}
> +
> +	syscon->regmap = regmap;
> +	syscon->np = np;
>  
> -	return (dev->of_node == dn) ? 1 : 0;
> +	spin_lock(&syscon_list_slock);
> +	list_add_tail(&syscon->list, &syscon_list);
> +	spin_unlock(&syscon_list_slock);
> +
> +	return syscon;
>  }
>  
>  struct regmap *syscon_node_to_regmap(struct device_node *np)
>  {
> -	struct syscon *syscon;
> -	struct device *dev;
> +	struct syscon *entry, *syscon = NULL;
>  
> -	dev = driver_find_device(&syscon_driver.driver, NULL, np,
> -				 syscon_match_node);
> -	if (!dev)
> -		return ERR_PTR(-EPROBE_DEFER);
> +	spin_lock(&syscon_list_slock);
>  
> -	syscon = dev_get_drvdata(dev);
> +	list_for_each_entry(entry, &syscon_list, list)
> +		if (entry->np == np) {
> +			syscon = entry;
> +			break;
> +		}
>  
> -	return syscon->regmap;
> +	spin_unlock(&syscon_list_slock);
> +
> +	if (!syscon)
> +		syscon = of_syscon_register(np);
> +
> +	if (!IS_ERR(syscon))
> +		return syscon->regmap;
> +
> +	return ERR_CAST(syscon);

nit: Usually error checking is done the opposite way, i.e.

	if (IS_ERR(syscon))
		return ERR_CAST(syscon);

	return syscon->regmap;

Best regards,
Tomasz
Tomasz Figa Sept. 19, 2014, 5:39 p.m. UTC | #3
On 19.09.2014 17:11, Tomasz Figa wrote:
>> +
>> +	if (!of_device_is_available(np) ||
> 
> Wouldn't it be enough to simply call of_find_device_by_node(np) and if
> it fails then instead create a dummy device?
> 
>> +			of_node_test_and_set_flag(np, OF_POPULATED)) {

One more thing I forgot to mention, the call to
of_node_test_and_set_flag() is also wrong, because it sets the flag,
marking the device as already populated, while it isn't.

Best regards,
Tomasz
Pankaj Dubey Sept. 22, 2014, 4:11 a.m. UTC | #4
Hi Tomasz,

On Friday, September 19, 2014 Tomasz Figa wrote,
> Hi Pankaj,
> 
> Please see my comments inline.
> 
> On 19.09.2014 15:06, Pankaj Dubey wrote:
> > Currently a syscon entity can be only registered directly through a
> > platform device that binds to a dedicated syscon driver. However in
> > certain use cases it is desirable to make a device used with another
> > driver a syscon interface provider.
> 
> [snip]
> 
> > -static int syscon_match_node(struct device *dev, void *data)
> > +static struct syscon *of_syscon_register(struct device_node *np)
> >  {
> > -	struct device_node *dn = data;
> > +	struct platform_device *pdev = NULL;
> > +	struct syscon *syscon;
> > +	struct regmap *regmap;
> > +	void __iomem *base;
> > +
> > +
> 
> nit: Stray blank line.
> 

OK. Will remove this.

> > +	if (!of_device_is_compatible(np, "syscon"))
> > +		return ERR_PTR(-EINVAL);
> 
> I don't think this check is needed at all. I'd say that drivers should be
free to register a
> syscon provider for any node.

I think this check is correct, as only nodes having "syscon" as secondary
compatibility should be
used to create a syscon provider. And that's why we have "syscon" as
secondary compatibility in
device nodes which can be a syscon provider.

> 
> > +
> > +	syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
> > +	if (!syscon)
> > +		return ERR_PTR(-ENOMEM);
> > +
> > +	base = of_iomap(np, 0);
> > +	if (!base)
> > +		return ERR_PTR(-ENOMEM);
> > +
> > +	if (!of_device_is_available(np) ||
> 
> Wouldn't it be enough to simply call of_find_device_by_node(np) and if it
fails then
> instead create a dummy device?
> 

OK, this could be also one of approach, I will change accordingly.

> > +			of_node_test_and_set_flag(np, OF_POPULATED)) {
> > +		/* if device is already populated and avaiable then use it
*/
> > +		pdev = of_find_device_by_node(np);
> > +		if (!(&pdev->dev))
> 
> This is just plain wrong, because this condition will always evaluate to
true (see the
> definition of struct platform_device). Shouldn't you rather just check the
pdev
> pointer?

OK, will update this.

> 
> > +			return ERR_PTR(-ENODEV);
> > +
> > +	} else {
> > +		/* for early users create dummy syscon device and use it */
> > +		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
> > +		if (!pdev)
> > +			return ERR_PTR(-ENOMEM);
> 
> Any clean-up on error path?

OK, will add error path. Also will use platform_device_alloc as suggested.

> 
> > +
> > +		pdev->name = "dummy-syscon";
> > +		pdev->id = -1;
> 
> Wouldn't you get an ID collision if more than one syscon is registered
early? Maybe
> the naming scheme from of_device_alloc() could be adopted partially?

I think this should not be an issue, passing id as -1 should take care of
this.
As you know Exynos has two syscon providers "pmu" and "sysreg" I have
written a test
code to check this scenario and tested it during early stage and I am
successfully able to get
PMU and SYSREG handle.
 
> 
> > +		device_initialize(&pdev->dev);
> 
> I wonder if you couldn't simply reuse platform_device_alloc() for all of
this, except
> the line below, which would still have to be handled separately.
> 
> > +		pdev->dev.of_node = np;
> > +	}
> > +
> > +	regmap = regmap_init_mmio(&pdev->dev, base, &syscon_regmap_config);
> > +	if (IS_ERR(regmap)) {
> > +		pr_err("regmap init failed\n");
> 
> If you have a dev here then you should be able to use dev_err() already.

OK.

> 
> > +		return ERR_CAST(regmap);
> > +	}

[snip]

> > +
> > +	if (!syscon)
> > +		syscon = of_syscon_register(np);
> > +
> > +	if (!IS_ERR(syscon))
> > +		return syscon->regmap;
> > +
> > +	return ERR_CAST(syscon);
> 
> nit: Usually error checking is done the opposite way, i.e.

OK, will change accordingly.

Thanks,
Pankaj Dubey
> 
> 	if (IS_ERR(syscon))
> 		return ERR_CAST(syscon);
> 
> 	return syscon->regmap;
> 
> Best regards,
> Tomasz
diff mbox

Patch

diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index ca15878..630de0a 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -15,6 +15,7 @@ 
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/list.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
@@ -22,33 +23,100 @@ 
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/slab.h>
 
 static struct platform_driver syscon_driver;
 
+static DEFINE_SPINLOCK(syscon_list_slock);
+static LIST_HEAD(syscon_list);
+
 struct syscon {
+	struct device_node *np;
 	struct regmap *regmap;
+	struct list_head list;
+};
+
+static struct regmap_config syscon_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
 };
 
-static int syscon_match_node(struct device *dev, void *data)
+static struct syscon *of_syscon_register(struct device_node *np)
 {
-	struct device_node *dn = data;
+	struct platform_device *pdev = NULL;
+	struct syscon *syscon;
+	struct regmap *regmap;
+	void __iomem *base;
+
+
+	if (!of_device_is_compatible(np, "syscon"))
+		return ERR_PTR(-EINVAL);
+
+	syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
+	if (!syscon)
+		return ERR_PTR(-ENOMEM);
+
+	base = of_iomap(np, 0);
+	if (!base)
+		return ERR_PTR(-ENOMEM);
+
+	if (!of_device_is_available(np) ||
+			of_node_test_and_set_flag(np, OF_POPULATED)) {
+		/* if device is already populated and avaiable then use it */
+		pdev = of_find_device_by_node(np);
+		if (!(&pdev->dev))
+			return ERR_PTR(-ENODEV);
+
+	} else {
+		/* for early users create dummy syscon device and use it */
+		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+		if (!pdev)
+			return ERR_PTR(-ENOMEM);
+
+		pdev->name = "dummy-syscon";
+		pdev->id = -1;
+		device_initialize(&pdev->dev);
+		pdev->dev.of_node = np;
+	}
+
+	regmap = regmap_init_mmio(&pdev->dev, base, &syscon_regmap_config);
+	if (IS_ERR(regmap)) {
+		pr_err("regmap init failed\n");
+		return ERR_CAST(regmap);
+	}
+
+	syscon->regmap = regmap;
+	syscon->np = np;
 
-	return (dev->of_node == dn) ? 1 : 0;
+	spin_lock(&syscon_list_slock);
+	list_add_tail(&syscon->list, &syscon_list);
+	spin_unlock(&syscon_list_slock);
+
+	return syscon;
 }
 
 struct regmap *syscon_node_to_regmap(struct device_node *np)
 {
-	struct syscon *syscon;
-	struct device *dev;
+	struct syscon *entry, *syscon = NULL;
 
-	dev = driver_find_device(&syscon_driver.driver, NULL, np,
-				 syscon_match_node);
-	if (!dev)
-		return ERR_PTR(-EPROBE_DEFER);
+	spin_lock(&syscon_list_slock);
 
-	syscon = dev_get_drvdata(dev);
+	list_for_each_entry(entry, &syscon_list, list)
+		if (entry->np == np) {
+			syscon = entry;
+			break;
+		}
 
-	return syscon->regmap;
+	spin_unlock(&syscon_list_slock);
+
+	if (!syscon)
+		syscon = of_syscon_register(np);
+
+	if (!IS_ERR(syscon))
+		return syscon->regmap;
+
+	return ERR_CAST(syscon);
 }
 EXPORT_SYMBOL_GPL(syscon_node_to_regmap);
 
@@ -110,17 +178,6 @@  struct regmap *syscon_regmap_lookup_by_phandle(struct device_node *np,
 }
 EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
 
-static const struct of_device_id of_syscon_match[] = {
-	{ .compatible = "syscon", },
-	{ },
-};
-
-static struct regmap_config syscon_regmap_config = {
-	.reg_bits = 32,
-	.val_bits = 32,
-	.reg_stride = 4,
-};
-
 static int syscon_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -167,7 +224,6 @@  static struct platform_driver syscon_driver = {
 	.driver = {
 		.name = "syscon",
 		.owner = THIS_MODULE,
-		.of_match_table = of_syscon_match,
 	},
 	.probe		= syscon_probe,
 	.id_table	= syscon_ids,