diff mbox

[4/4] arm64: dts: Add initial pinctrl support to EXYNOS7

Message ID 1410598252-30931-6-git-send-email-a.kesavan@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Abhilash Kesavan Sept. 13, 2014, 8:50 a.m. UTC
From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>

Add intial pin configuration nodes for EXYNOS7.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thomas Abraham <thomas.ab@samsung.com>
---
 arch/arm64/Kconfig                              |    2 +
 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi |  560 +++++++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos7.dtsi         |   66 +++
 3 files changed, 628 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi

Comments

Thomas Abraham Sept. 13, 2014, 10:54 a.m. UTC | #1
Hi Abhilash,

On Sat, Sep 13, 2014 at 2:20 PM, Abhilash Kesavan <a.kesavan@samsung.com> wrote:
> From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>
> Add intial pin configuration nodes for EXYNOS7.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Thomas Abraham <thomas.ab@samsung.com>
> ---
>  arch/arm64/Kconfig                              |    2 +
>  arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi |  560 +++++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |   66 +++
>  3 files changed, 628 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index b4d1dc2..0dcf6f5 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -143,6 +143,8 @@ config ARCH_EXYNOS7
>         bool "ARMv8 based Samsung Exynos7"
>         select ARCH_EXYNOS
>         select COMMON_CLK_SAMSUNG
> +       select PINCTRL
> +       select PINCTRL_EXYNOS

It would be good if the this change is moved to a different patch and
keep this only for dts updates. Rest of the patch looks fine.

Regards,
Thomas.

>         help
>           This enables support for Samsung Exynos7 SoC family
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> new file mode 100644
> index 0000000..d858805
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -0,0 +1,560 @@
> +/*
> + * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *             http://www.samsung.com
> + *
> + * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
> + * device tree nodes in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +&pinctrl_alive {
> +       gpa0: gpa0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               interrupt-parent = <&gic>;
> +               #interrupt-cells = <2>;
> +               interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> +                            <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> +       };
> +
> +       gpa1: gpa1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               interrupt-parent = <&gic>;
> +               #interrupt-cells = <2>;
> +               interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> +                            <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> +       };
> +
> +       gpa2: gpa2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpa3: gpa3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +};
> +
> +&pinctrl_bus0 {
> +       gpb0: gpb0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc0: gpc0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc1: gpc1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc2: gpc2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc3: gpc3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd0: gpd0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd1: gpd1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd2: gpd2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd4: gpd4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd5: gpd5 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd6: gpd6 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd7: gpd7 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd8: gpd8 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg0: gpg0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg3: gpg3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c10_bus: hs-i2c10-bus {
> +               samsung,pins = "gpb0-1", "gpb0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c11_bus: hs-i2c11-bus {
> +               samsung,pins = "gpb0-3", "gpb0-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c2_bus: hs-i2c2-bus {
> +               samsung,pins = "gpd0-3", "gpd0-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart0_data: uart0-data {
> +               samsung,pins = "gpd0-0", "gpd0-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart0_fctl: uart0-fctl {
> +               samsung,pins = "gpd0-2", "gpd0-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart2_data: uart2-data {
> +               samsung,pins = "gpd1-4", "gpd1-5";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c3_bus: hs-i2c3-bus {
> +               samsung,pins = "gpd1-3", "gpd1-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart1_data: uart1-data {
> +               samsung,pins = "gpd1-0", "gpd1-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart1_fctl: uart1-fctl {
> +               samsung,pins = "gpd1-2", "gpd1-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c0_bus: hs-i2c0-bus {
> +               samsung,pins = "gpd2-1", "gpd2-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c1_bus: hs-i2c1-bus {
> +               samsung,pins = "gpd2-3", "gpd2-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c9_bus: hs-i2c9-bus {
> +               samsung,pins = "gpd2-7", "gpd2-6";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c8_bus: hs-i2c8-bus {
> +               samsung,pins = "gpd5-3", "gpd5-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart3_data: uart3-data {
> +               samsung,pins = "gpd5-0", "gpd5-1";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi2_bus: spi2-bus {
> +               samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi1_bus: spi1-bus {
> +               samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi0_bus: spi0-bus {
> +               samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c4_bus: hs-i2c4-bus {
> +               samsung,pins = "gpg3-1", "gpg3-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c5_bus: hs-i2c5-bus {
> +               samsung,pins = "gpg3-3", "gpg3-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_nfc {
> +       gpj0: gpj0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c6_bus: hs-i2c6-bus {
> +               samsung,pins = "gpj0-1", "gpj0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_touch {
> +       gpj1: gpj1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c7_bus: hs-i2c7-bus {
> +               samsung,pins = "gpj1-1", "gpj1-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_ff {
> +       gpg4: gpg4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       spi3_bus: spi3-bus {
> +               samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_ese {
> +       gpv7: gpv7 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       spi4_bus: spi4-bus {
> +               samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_fsys0 {
> +       gpr4: gpr4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       sd2_clk: sd2-clk {
> +               samsung,pins = "gpr4-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_cmd: sd2-cmd {
> +               samsung,pins = "gpr4-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_cd: sd2-cd {
> +               samsung,pins = "gpr4-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_bus1: sd2-bus-width1 {
> +               samsung,pins = "gpr4-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_bus4: sd2-bus-width4 {
> +               samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +};
> +
> +&pinctrl_fsys1 {
> +       gpr0: gpr0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr1: gpr1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr2: gpr2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr3: gpr3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       sd0_clk: sd0-clk {
> +               samsung,pins = "gpr0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_cmd: sd0-cmd {
> +               samsung,pins = "gpr0-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_rdqs: sd0-rdqs {
> +               samsung,pins = "gpr0-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_qrdy: sd0-qrdy {
> +               samsung,pins = "gpr0-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus1: sd0-bus-width1 {
> +               samsung,pins = "gpr1-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus4: sd0-bus-width4 {
> +               samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus8: sd0-bus-width8 {
> +               samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd1_clk: sd1-clk {
> +               samsung,pins = "gpr2-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_cmd: sd1-cmd {
> +               samsung,pins = "gpr2-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_ds: sd1-ds {
> +               samsung,pins = "gpr2-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_qrdy: sd1-qrdy {
> +               samsung,pins = "gpr2-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_int: sd1-int {
> +               samsung,pins = "gpr2-4";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_bus1: sd1-bus-width1 {
> +               samsung,pins = "gpr3-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_bus4: sd1-bus-width4 {
> +               samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_bus8: sd1-bus-width8 {
> +               samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c5b1b86..f8a07cc 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -17,6 +17,17 @@
>         #address-cells = <2>;
>         #size-cells = <2>;
>
> +       aliases {
> +               pinctrl0 = &pinctrl_alive;
> +               pinctrl1 = &pinctrl_bus0;
> +               pinctrl2 = &pinctrl_nfc;
> +               pinctrl3 = &pinctrl_touch;
> +               pinctrl4 = &pinctrl_ff;
> +               pinctrl5 = &pinctrl_ese;
> +               pinctrl6 = &pinctrl_fsys0;
> +               pinctrl7 = &pinctrl_fsys1;
> +       };
> +
>         cpus {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> @@ -149,6 +160,59 @@
>                         status = "disabled";
>                 };
>
> +               pinctrl_alive: pinctrl@10580000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x10580000 0x1000>;
> +
> +                       wakeup-interrupt-controller {
> +                               compatible = "samsung,exynos7-wakeup-eint";
> +                               interrupt-parent = <&gic>;
> +                               interrupts = <0 16 0>;
> +                       };
> +               };
> +
> +               pinctrl_bus0: pinctrl@13470000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x13470000 0x1000>;
> +                       interrupts = <0 383 0>;
> +               };
> +
> +               pinctrl_nfc: pinctrl@14cd0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14cd0000 0x1000>;
> +                       interrupts = <0 473 0>;
> +               };
> +
> +               pinctrl_touch: pinctrl@14ce0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14ce0000 0x1000>;
> +                       interrupts = <0 474 0>;
> +               };
> +
> +               pinctrl_ff: pinctrl@14c90000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14c90000 0x1000>;
> +                       interrupts = <0 475 0>;
> +               };
> +
> +               pinctrl_ese: pinctrl@14ca0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14ca0000 0x1000>;
> +                       interrupts = <0 476 0>;
> +               };
> +
> +               pinctrl_fsys0: pinctrl@10e60000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x10e60000 0x1000>;
> +                       interrupts = <0 221 0>;
> +               };
> +
> +               pinctrl_fsys1: pinctrl@15690000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x15690000 0x1000>;
> +                       interrupts = <0 203 0>;
> +               };
> +
>                 timer {
>                         compatible = "arm,armv8-timer";
>                         interrupts = <1 13 0xff01>,
> @@ -158,3 +222,5 @@
>                 };
>         };
>  };
> +
> +#include "exynos7-pinctrl.dtsi"
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alim Akhtar Sept. 20, 2014, 12:08 p.m. UTC | #2
Hi Abhilash,

On Sat, Sep 13, 2014 at 2:20 PM, Abhilash Kesavan <a.kesavan@samsung.com> wrote:
> From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
>
> Add intial pin configuration nodes for EXYNOS7.
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Thomas Abraham <thomas.ab@samsung.com>
> ---
>  arch/arm64/Kconfig                              |    2 +
>  arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi |  560 +++++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos7.dtsi         |   66 +++
>  3 files changed, 628 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index b4d1dc2..0dcf6f5 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -143,6 +143,8 @@ config ARCH_EXYNOS7
>         bool "ARMv8 based Samsung Exynos7"
>         select ARCH_EXYNOS
>         select COMMON_CLK_SAMSUNG
> +       select PINCTRL
> +       select PINCTRL_EXYNOS
>         help
>           This enables support for Samsung Exynos7 SoC family
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> new file mode 100644
> index 0000000..d858805
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -0,0 +1,560 @@
> +/*
> + * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + *             http://www.samsung.com
> + *
> + * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
> + * device tree nodes in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +&pinctrl_alive {
> +       gpa0: gpa0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               interrupt-parent = <&gic>;
> +               #interrupt-cells = <2>;
> +               interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> +                            <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> +       };
> +
> +       gpa1: gpa1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               interrupt-parent = <&gic>;
> +               #interrupt-cells = <2>;
> +               interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> +                            <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> +       };
> +
> +       gpa2: gpa2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpa3: gpa3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +};
> +
> +&pinctrl_bus0 {
> +       gpb0: gpb0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc0: gpc0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc1: gpc1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc2: gpc2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpc3: gpc3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd0: gpd0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd1: gpd1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd2: gpd2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd4: gpd4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd5: gpd5 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd6: gpd6 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd7: gpd7 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpd8: gpd8 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg0: gpg0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpg3: gpg3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c10_bus: hs-i2c10-bus {
> +               samsung,pins = "gpb0-1", "gpb0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c11_bus: hs-i2c11-bus {
> +               samsung,pins = "gpb0-3", "gpb0-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c2_bus: hs-i2c2-bus {
> +               samsung,pins = "gpd0-3", "gpd0-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart0_data: uart0-data {
> +               samsung,pins = "gpd0-0", "gpd0-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart0_fctl: uart0-fctl {
> +               samsung,pins = "gpd0-2", "gpd0-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart2_data: uart2-data {
> +               samsung,pins = "gpd1-4", "gpd1-5";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c3_bus: hs-i2c3-bus {
> +               samsung,pins = "gpd1-3", "gpd1-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart1_data: uart1-data {
> +               samsung,pins = "gpd1-0", "gpd1-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart1_fctl: uart1-fctl {
> +               samsung,pins = "gpd1-2", "gpd1-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c0_bus: hs-i2c0-bus {
> +               samsung,pins = "gpd2-1", "gpd2-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c1_bus: hs-i2c1-bus {
> +               samsung,pins = "gpd2-3", "gpd2-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c9_bus: hs-i2c9-bus {
> +               samsung,pins = "gpd2-7", "gpd2-6";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c8_bus: hs-i2c8-bus {
> +               samsung,pins = "gpd5-3", "gpd5-2";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       uart3_data: uart3-data {
> +               samsung,pins = "gpd5-0", "gpd5-1";
> +               samsung,pin-function = <3>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi2_bus: spi2-bus {
> +               samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi1_bus: spi1-bus {
> +               samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       spi0_bus: spi0-bus {
> +               samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c4_bus: hs-i2c4-bus {
> +               samsung,pins = "gpg3-1", "gpg3-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +
> +       hs_i2c5_bus: hs-i2c5-bus {
> +               samsung,pins = "gpg3-3", "gpg3-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_nfc {
> +       gpj0: gpj0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c6_bus: hs-i2c6-bus {
> +               samsung,pins = "gpj0-1", "gpj0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_touch {
> +       gpj1: gpj1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       hs_i2c7_bus: hs-i2c7-bus {
> +               samsung,pins = "gpj1-1", "gpj1-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_ff {
> +       gpg4: gpg4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       spi3_bus: spi3-bus {
> +               samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_ese {
> +       gpv7: gpv7 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       spi4_bus: spi4-bus {
> +               samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <0>;
> +       };
> +};
> +
> +&pinctrl_fsys0 {
> +       gpr4: gpr4 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       sd2_clk: sd2-clk {
> +               samsung,pins = "gpr4-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_cmd: sd2-cmd {
> +               samsung,pins = "gpr4-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_cd: sd2-cd {
> +               samsung,pins = "gpr4-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_bus1: sd2-bus-width1 {
> +               samsung,pins = "gpr4-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd2_bus4: sd2-bus-width4 {
> +               samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +};
> +
> +&pinctrl_fsys1 {
> +       gpr0: gpr0 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr1: gpr1 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr2: gpr2 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       gpr3: gpr3 {
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <2>;
> +       };
> +
> +       sd0_clk: sd0-clk {
> +               samsung,pins = "gpr0-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_cmd: sd0-cmd {
> +               samsung,pins = "gpr0-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_rdqs: sd0-rdqs {
This is Data Strobe pin, please rename this as 'sd0_ds' as it is down
below for sd1-ds. Also that matches the datasheet that I have.
> +               samsung,pins = "gpr0-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_qrdy: sd0-qrdy {
> +               samsung,pins = "gpr0-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus1: sd0-bus-width1 {
> +               samsung,pins = "gpr1-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus4: sd0-bus-width4 {
> +               samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd0_bus8: sd0-bus-width8 {
> +               samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <3>;
> +       };
> +
> +       sd1_clk: sd1-clk {
> +               samsung,pins = "gpr2-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_cmd: sd1-cmd {
> +               samsung,pins = "gpr2-1";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <0>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_ds: sd1-ds {
> +               samsung,pins = "gpr2-2";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_qrdy: sd1-qrdy {
> +               samsung,pins = "gpr2-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_int: sd1-int {
> +               samsung,pins = "gpr2-4";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <1>;
> +               samsung,pin-drv = <6>;
> +       };
> +
> +       sd1_bus1: sd1-bus-width1 {
> +               samsung,pins = "gpr3-0";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_bus4: sd1-bus-width4 {
> +               samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +
> +       sd1_bus8: sd1-bus-width8 {
> +               samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
> +               samsung,pin-function = <2>;
> +               samsung,pin-pud = <3>;
> +               samsung,pin-drv = <2>;
> +       };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c5b1b86..f8a07cc 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -17,6 +17,17 @@
>         #address-cells = <2>;
>         #size-cells = <2>;
>
> +       aliases {
> +               pinctrl0 = &pinctrl_alive;
> +               pinctrl1 = &pinctrl_bus0;
> +               pinctrl2 = &pinctrl_nfc;
> +               pinctrl3 = &pinctrl_touch;
> +               pinctrl4 = &pinctrl_ff;
> +               pinctrl5 = &pinctrl_ese;
> +               pinctrl6 = &pinctrl_fsys0;
> +               pinctrl7 = &pinctrl_fsys1;
> +       };
> +
>         cpus {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> @@ -149,6 +160,59 @@
>                         status = "disabled";
>                 };
>
> +               pinctrl_alive: pinctrl@10580000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x10580000 0x1000>;
> +
> +                       wakeup-interrupt-controller {
> +                               compatible = "samsung,exynos7-wakeup-eint";
> +                               interrupt-parent = <&gic>;
> +                               interrupts = <0 16 0>;
> +                       };
> +               };
> +
> +               pinctrl_bus0: pinctrl@13470000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x13470000 0x1000>;
> +                       interrupts = <0 383 0>;
> +               };
> +
> +               pinctrl_nfc: pinctrl@14cd0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14cd0000 0x1000>;
> +                       interrupts = <0 473 0>;
> +               };
> +
> +               pinctrl_touch: pinctrl@14ce0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14ce0000 0x1000>;
> +                       interrupts = <0 474 0>;
> +               };
> +
> +               pinctrl_ff: pinctrl@14c90000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14c90000 0x1000>;
> +                       interrupts = <0 475 0>;
> +               };
> +
> +               pinctrl_ese: pinctrl@14ca0000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x14ca0000 0x1000>;
> +                       interrupts = <0 476 0>;
> +               };
> +
> +               pinctrl_fsys0: pinctrl@10e60000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x10e60000 0x1000>;
> +                       interrupts = <0 221 0>;
> +               };
> +
> +               pinctrl_fsys1: pinctrl@15690000 {
> +                       compatible = "samsung,exynos7-pinctrl";
> +                       reg = <0x15690000 0x1000>;
> +                       interrupts = <0 203 0>;
> +               };
> +
>                 timer {
>                         compatible = "arm,armv8-timer";
>                         interrupts = <1 13 0xff01>,
> @@ -158,3 +222,5 @@
>                 };
>         };
>  };
> +
> +#include "exynos7-pinctrl.dtsi"
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b4d1dc2..0dcf6f5 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -143,6 +143,8 @@  config ARCH_EXYNOS7
 	bool "ARMv8 based Samsung Exynos7"
 	select ARCH_EXYNOS
 	select COMMON_CLK_SAMSUNG
+	select PINCTRL
+	select PINCTRL_EXYNOS
 	help
 	  This enables support for Samsung Exynos7 SoC family
 
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
new file mode 100644
index 0000000..d858805
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -0,0 +1,560 @@ 
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_ds: sd1-ds {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_qrdy: sd1-qrdy {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index c5b1b86..f8a07cc 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -17,6 +17,17 @@ 
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_bus0;
+		pinctrl2 = &pinctrl_nfc;
+		pinctrl3 = &pinctrl_touch;
+		pinctrl4 = &pinctrl_ff;
+		pinctrl5 = &pinctrl_ese;
+		pinctrl6 = &pinctrl_fsys0;
+		pinctrl7 = &pinctrl_fsys1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -149,6 +160,59 @@ 
 			status = "disabled";
 		};
 
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10580000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 16 0>;
+			};
+		};
+
+		pinctrl_bus0: pinctrl@13470000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x13470000 0x1000>;
+			interrupts = <0 383 0>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <0 473 0>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ce0000 0x1000>;
+			interrupts = <0 474 0>;
+		};
+
+		pinctrl_ff: pinctrl@14c90000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14c90000 0x1000>;
+			interrupts = <0 475 0>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <0 476 0>;
+		};
+
+		pinctrl_fsys0: pinctrl@10e60000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10e60000 0x1000>;
+			interrupts = <0 221 0>;
+		};
+
+		pinctrl_fsys1: pinctrl@15690000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <0 203 0>;
+		};
+
 		timer {
 			compatible = "arm,armv8-timer";
 			interrupts = <1 13 0xff01>,
@@ -158,3 +222,5 @@ 
 		};
 	};
 };
+
+#include "exynos7-pinctrl.dtsi"