| Message ID | 1251303445-25317-4-git-send-email-elendil@planet.nl (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
On Thu, 2009-08-27 at 00:17 +0800, Frans Pop wrote: > Users can force passive cooling for a thermal zone that does not > have _PSV defined in ACPI by setting the passive attribute in sysfs. > It's useful to display such trip points in /proc/acpi/thermal_zone. > > .../TZ1/cooling_mode:<setting not supported> > .../TZ1/polling_frequency:polling frequency: 10 seconds > .../TZ1/state:state: ok > .../TZ1/temperature:temperature: 53 C > .../TZ1/trip_points:critical (S5): 110 C > .../TZ1/trip_points:passive (forced): 95 C > > And if not set (passive is 0): > .../TZ1/trip_points:passive (forced):<not set> > > Signed-off-by: Frans Pop <elendil@planet.nl> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Matthew Garrett <mjg59@srcf.ucam.org> > Acked-by: Zhang Rui <rui.zhang@intel.com> thanks, rui > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > index 564ea14..a4e507b 100644 > --- a/drivers/acpi/thermal.c > +++ b/drivers/acpi/thermal.c > @@ -1050,6 +1050,13 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) > acpi_device_bid(device)); > } > seq_puts(seq, "\n"); > + } else { > + seq_printf(seq, "passive (forced):"); > + if (tz->thermal_zone->forced_passive) > + seq_printf(seq, " %i C\n", > + tz->thermal_zone->forced_passive / 1000); > + else > + seq_printf(seq, "<not set>\n"); > } > > for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 564ea14..a4e507b 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1050,6 +1050,13 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) acpi_device_bid(device)); } seq_puts(seq, "\n"); + } else { + seq_printf(seq, "passive (forced):"); + if (tz->thermal_zone->forced_passive) + seq_printf(seq, " %i C\n", + tz->thermal_zone->forced_passive / 1000); + else + seq_printf(seq, "<not set>\n"); } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
Users can force passive cooling for a thermal zone that does not have _PSV defined in ACPI by setting the passive attribute in sysfs. It's useful to display such trip points in /proc/acpi/thermal_zone. .../TZ1/cooling_mode:<setting not supported> .../TZ1/polling_frequency:polling frequency: 10 seconds .../TZ1/state:state: ok .../TZ1/temperature:temperature: 53 C .../TZ1/trip_points:critical (S5): 110 C .../TZ1/trip_points:passive (forced): 95 C And if not set (passive is 0): .../TZ1/trip_points:passive (forced):<not set> Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html