| Message ID | 5230569.XLlNbB5NvF@amdc1032 (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Bartlomiej Zolnierkiewicz wrote: > > Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation > when topology is read from DT") fixed GIC driver to filter cluster ID > from values returned by cpu_logical_map() for SoCs having registers > mapped without per-CPU banking making it is possible to add CPU nodes > for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also > required by future changes adding initialization of cpuidle states in > Exynos cpuidle driver through DT. > > Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > --- > Based on for-next branch of linux-samsung.git tree. > > v3: > - refreshed on top of Kukjin's tree > > v2: > - match the unit-address with the reg > > arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ > arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ > arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ > 3 files changed, 63 insertions(+) Thanks for re-spin and looks good to me. Applied. Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[CC'ed Daniel to make him aware this patch goes through your tree] On Thu, Sep 25, 2014 at 06:56:33AM +0100, Kukjin Kim wrote: > Bartlomiej Zolnierkiewicz wrote: > > > > Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation > > when topology is read from DT") fixed GIC driver to filter cluster ID > > from values returned by cpu_logical_map() for SoCs having registers > > mapped without per-CPU banking making it is possible to add CPU nodes > > for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also > > required by future changes adding initialization of cpuidle states in > > Exynos cpuidle driver through DT. > > > > Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). > > > > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> > > --- > > Based on for-next branch of linux-samsung.git tree. > > > > v3: > > - refreshed on top of Kukjin's tree > > > > v2: > > - match the unit-address with the reg > > > > arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ > > arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ > > arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ > > 3 files changed, 63 insertions(+) > > Thanks for re-spin and looks good to me. > > Applied. That's great, now my Exynos CPUidle DT patch should be rebased on top of this patch so that thanks to the testing carried out by Bart it can be merged too. Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/25/14 17:17, Lorenzo Pieralisi wrote: > [CC'ed Daniel to make him aware this patch goes through your tree] > Thanks and just note the branch which is including this change actually v4 is just rebased not v3 will be sent out to arm-soc last tonight or tomorrow. - Kukjin > On Thu, Sep 25, 2014 at 06:56:33AM +0100, Kukjin Kim wrote: >> Bartlomiej Zolnierkiewicz wrote: >>> >>> Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation >>> when topology is read from DT") fixed GIC driver to filter cluster ID >>> from values returned by cpu_logical_map() for SoCs having registers >>> mapped without per-CPU banking making it is possible to add CPU nodes >>> for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also >>> required by future changes adding initialization of cpuidle states in >>> Exynos cpuidle driver through DT. >>> >>> Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). >>> >>> Signed-off-by: Bartlomiej Zolnierkiewicz<b.zolnierkie@samsung.com> >>> --- >>> Based on for-next branch of linux-samsung.git tree. >>> >>> v3: >>> - refreshed on top of Kukjin's tree >>> >>> v2: >>> - match the unit-address with the reg >>> >>> arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ >>> arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ >>> arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ >>> 3 files changed, 63 insertions(+) >> >> Thanks for re-spin and looks good to me. >> >> Applied. > > That's great, now my Exynos CPUidle DT patch should be rebased on top > of this patch so that thanks to the testing carried out by Bart it can be > merged too. > > Lorenzo > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kukjin, On 25.09.2014 10:26, Kukjin Kim wrote: > On 09/25/14 17:17, Lorenzo Pieralisi wrote: >> [CC'ed Daniel to make him aware this patch goes through your tree] >> > Thanks and just note the branch which is including this change actually > v4 is just rebased not v3 will be sent out to arm-soc last tonight or > tomorrow. Could you keep this patch in a separate stable branch, so I could pull it as a dependency for Thomas Abraham's cpufreq series? Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/25/14 17:28, Tomasz Figa wrote: > Hi Kukjin, > > On 25.09.2014 10:26, Kukjin Kim wrote: >> On 09/25/14 17:17, Lorenzo Pieralisi wrote: >>> [CC'ed Daniel to make him aware this patch goes through your tree] >>> >> Thanks and just note the branch which is including this change actually >> v4 is just rebased not v3 will be sent out to arm-soc last tonight or >> tomorrow. v3 is correct :) sorry, I confused the version... > > Could you keep this patch in a separate stable branch, so I could pull > it as a dependency for Thomas Abraham's cpufreq series? > It's possible, but would be better that DT changes are sent to upstream through samsung/arm-soc tree?...we suffered ugly conflicts between arm-soc and driver before and then we decided DT changes should be handled in arm-soc...Hmm... - Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 25.09.2014 10:44, Kukjin Kim wrote: > On 09/25/14 17:28, Tomasz Figa wrote: >> Hi Kukjin, >> >> On 25.09.2014 10:26, Kukjin Kim wrote: >>> On 09/25/14 17:17, Lorenzo Pieralisi wrote: >>>> [CC'ed Daniel to make him aware this patch goes through your tree] >>>> >>> Thanks and just note the branch which is including this change actually >>> v4 is just rebased not v3 will be sent out to arm-soc last tonight or >>> tomorrow. > > v3 is correct :) sorry, I confused the version... > >> >> Could you keep this patch in a separate stable branch, so I could pull >> it as a dependency for Thomas Abraham's cpufreq series? >> > It's possible, but would be better that DT changes are sent to upstream > through samsung/arm-soc tree?...we suffered ugly conflicts between > arm-soc and driver before and then we decided DT changes should be > handled in arm-soc...Hmm... The only other option I can see is splitting the series and sending mach/dts patches through arm-soc and clock/cpufreq patches through clock tree. This would break cpufreq support in both trees, until they both hit Linus's tree. If this is not a problem, then I can proceed this way. Please correct me if I'm missing something. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/25/2014 10:17 AM, Lorenzo Pieralisi wrote: > [CC'ed Daniel to make him aware this patch goes through your tree] Thanks for the head up. I was about to send the PR to Rafael. [ ... ] > That's great, now my Exynos CPUidle DT patch should be rebased on top > of this patch so that thanks to the testing carried out by Bart it can be > merged too. Ok, I am getting confused. How can I rebase the latest patch of your series with a patch no yet available in my tree ? I propose just to drop the last patch and wait for the next merge to reintegrate it into the cpuidle tree. Does it make sense ? Thanks -- Daniel
On Thu, Sep 25, 2014 at 10:02:05AM +0100, Daniel Lezcano wrote: > On 09/25/2014 10:17 AM, Lorenzo Pieralisi wrote: > > [CC'ed Daniel to make him aware this patch goes through your tree] > > Thanks for the head up. I was about to send the PR to Rafael. > > [ ... ] > > > That's great, now my Exynos CPUidle DT patch should be rebased on top > > of this patch so that thanks to the testing carried out by Bart it can be > > merged too. > > Ok, I am getting confused. How can I rebase the latest patch of your > series with a patch no yet available in my tree ? I just wanted to say that the Exynos CPUidle DT patch depends on this patch, that is now going through Samsung tree, to make sure we are on the same page and prevent issues, it was not clear, sorry. > I propose just to drop the last patch and wait for the next merge to > reintegrate it into the cpuidle tree. Does it make sense ? I agree, drop the Exynos CPUidle DT patch, we will reintegrate it in the CPUidle tree when the merge window closes and dependencies are sorted out. Thanks a lot, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 09/25/2014 11:36 AM, Lorenzo Pieralisi wrote: > On Thu, Sep 25, 2014 at 10:02:05AM +0100, Daniel Lezcano wrote: >> On 09/25/2014 10:17 AM, Lorenzo Pieralisi wrote: >>> [CC'ed Daniel to make him aware this patch goes through your tree] >> >> Thanks for the head up. I was about to send the PR to Rafael. >> >> [ ... ] >> >>> That's great, now my Exynos CPUidle DT patch should be rebased on top >>> of this patch so that thanks to the testing carried out by Bart it can be >>> merged too. >> >> Ok, I am getting confused. How can I rebase the latest patch of your >> series with a patch no yet available in my tree ? > > I just wanted to say that the Exynos CPUidle DT patch depends on this > patch, that is now going through Samsung tree, to make sure we are on > the same page and prevent issues, it was not clear, sorry. Ah, ok. >> I propose just to drop the last patch and wait for the next merge to >> reintegrate it into the cpuidle tree. Does it make sense ? > > I agree, drop the Exynos CPUidle DT patch, we will reintegrate it in the > CPUidle tree when the merge window closes and dependencies are sorted out. Perfect. I sent the PR to Rafael. Thanks -- Daniel
On Thu, Sep 25, 2014 at 09:26:03AM +0100, Kukjin Kim wrote: > On 09/25/14 17:17, Lorenzo Pieralisi wrote: > > [CC'ed Daniel to make him aware this patch goes through your tree] > > > Thanks and just note the branch which is including this change actually > v4 is just rebased not v3 will be sent out to arm-soc last tonight or > tomorrow. What's the plan for patch ? I do not see it upstream and would like to rebase the Exynos CPUidle changes on top of it. Thanks, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: b/arch/arm/boot/dts/exynos4210.dtsi =================================================================== --- a/arch/arm/boot/dts/exynos4210.dtsi 2014-09-24 14:38:18.958571829 +0200 +++ b/arch/arm/boot/dts/exynos4210.dtsi 2014-09-24 15:08:14.062510517 +0200 @@ -31,6 +31,23 @@ pinctrl2 = &pinctrl_2; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@900 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x900>; + }; + + cpu@901 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x901>; + }; + }; + pmu_system_controller: system-controller@10020000 { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; Index: b/arch/arm/boot/dts/exynos4212.dtsi =================================================================== --- a/arch/arm/boot/dts/exynos4212.dtsi 2014-09-24 14:38:18.954571828 +0200 +++ b/arch/arm/boot/dts/exynos4212.dtsi 2014-09-24 14:43:02.198562156 +0200 @@ -22,6 +22,23 @@ / { compatible = "samsung,exynos4212", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <18>; }; Index: b/arch/arm/boot/dts/exynos4412.dtsi =================================================================== --- a/arch/arm/boot/dts/exynos4412.dtsi 2014-09-24 14:38:18.966571830 +0200 +++ b/arch/arm/boot/dts/exynos4412.dtsi 2014-09-24 14:43:02.198562156 +0200 @@ -22,6 +22,35 @@ / { compatible = "samsung,exynos4412", "samsung,exynos4"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@A00 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA00>; + }; + + cpu@A01 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA01>; + }; + + cpu@A02 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA02>; + }; + + cpu@A03 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0xA03>; + }; + }; + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <20>; };
Recent patch by Tomasz Figa ("irqchip: gic: Fix core ID calculation when topology is read from DT") fixed GIC driver to filter cluster ID from values returned by cpu_logical_map() for SoCs having registers mapped without per-CPU banking making it is possible to add CPU nodes for Exynos4 SoCs. In case of Exynos SoCs these CPU nodes are also required by future changes adding initialization of cpuidle states in Exynos cpuidle driver through DT. Tested on Origen board (Exynos4210 SoC) and Trats2 (Exynos4412 SoC). Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- Based on for-next branch of linux-samsung.git tree. v3: - refreshed on top of Kukjin's tree v2: - match the unit-address with the reg arch/arm/boot/dts/exynos4210.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4212.dtsi | 17 +++++++++++++++++ arch/arm/boot/dts/exynos4412.dtsi | 29 +++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html