| Message ID | 1412001499-19369-3-git-send-email-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi Grygorii, On Mon, Sep 29, 2014 at 4:38 PM, Grygorii Strashko <grygorii.strashko@ti.com> wrote: > This patch switches Keystone 2 PM code to use Generic PM domains > instead of PM clock domains because of the lack of DT support > for the last. Thanks, this looks interesting, as today I've been digging deeper into the !CONFIG_PM_RUNTIME case for my patch series, and ended up with something similar... > --- a/arch/arm/mach-keystone/pm_domain.c > +++ b/arch/arm/mach-keystone/pm_domain.c > @@ -12,69 +12,110 @@ > * version 2, as published by the Free Software Foundation. > */ > > +#include <linux/clk.h> > #include <linux/init.h> > -#include <linux/pm_runtime.h> > #include <linux/pm_clock.h> > +#include <linux/pm_domain.h> > #include <linux/platform_device.h> > -#include <linux/clk-provider.h> > #include <linux/of.h> > > -#ifdef CONFIG_PM_RUNTIME > -static int keystone_pm_runtime_suspend(struct device *dev) > +#ifdef CONFIG_PM_GENERIC_DOMAINS > + > +struct keystone_domain { > + struct generic_pm_domain base; > + struct device *dev; > +}; > + > +void keystone_pm_domain_attach_dev(struct device *dev) > { > + struct clk *clk; > int ret; > + int i = 0; > > dev_dbg(dev, "%s\n", __func__); > > - ret = pm_generic_runtime_suspend(dev); > - if (ret) > - return ret; > - > - ret = pm_clk_suspend(dev); > + ret = pm_clk_create(dev); > if (ret) { > - pm_generic_runtime_resume(dev); > - return ret; > + dev_err(dev, "pm_clk_create failed %d\n", ret); > + return; > + }; > + > + while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) { > + ret = pm_clk_add_clk(dev, clk); This is an important difference compared to the non-DT pm_clk_notify() version for !CONFIG_PM_RUNTIME. You do call pm_clk_create() and pm_clk_add_clk(), while pm_clk_notify() doesn't. Hence for the latter, the clocklist is always empty. > + if (ret) { > + dev_err(dev, "pm_clk_add_clk failed %d\n", ret); > + goto clk_err; > + }; > } > > - return 0; > + if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { > + ret = pm_clk_resume(dev); As a consequence of the above, calling pm_clk_resume() here just works, and there's no need for the separate enable_clock()/disable_clock() functions, like in drivers/base/power/clock_ops.c. > + if (ret) { > + dev_err(dev, "pm_clk_resume failed %d\n", ret); > + goto clk_err; > + }; > + } > + return; > + > +clk_err: > + pm_clk_destroy(dev); > } > > -static int keystone_pm_runtime_resume(struct device *dev) > +void keystone_pm_domain_detach_dev(struct device *dev) > { > dev_dbg(dev, "%s\n", __func__); > - > - pm_clk_resume(dev); > - > - return pm_generic_runtime_resume(dev); > + pm_clk_destroy(dev); > } > -#endif > > -static struct dev_pm_domain keystone_pm_domain = { > - .ops = { > - SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend, > - keystone_pm_runtime_resume, NULL) > - USE_PLATFORM_PM_SLEEP_OPS > +static const struct keystone_domain keystone_domain = { > + .base = { > + .name = "keystone", > + .attach_dev = keystone_pm_domain_attach_dev, > + .detach_dev = keystone_pm_domain_detach_dev, > + .dev_ops = { > + .stop = pm_clk_suspend, > + .start = pm_clk_resume, Same here: the clocks will be disabled/enabled on system suspend/resume, which is not the case for the non-DT case. Rafael: shouldn't pm_clk_notify() in drivers/base/power/clock_ops.c behave the same as above? Or is there a good reason the non-PM runtime version doesn't call pm_clk_add()? Then the two versions (CONFIG_PM_RUNTIME enabled vs. disabled) can become more similar, and perhaps be merged. > + }, > + .power_off_latency_ns = 25000, > + .power_on_latency_ns = 2000000, > }, > }; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday 29 September 2014 10:38 AM, Grygorii Strashko wrote: > This patch switches Keystone 2 PM code to use Generic PM domains > instead of PM clock domains because of the lack of DT support > for the last. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > --- > .../devicetree/bindings/power/ti,keystone-gpc.txt | 31 ++++++ > arch/arm/mach-keystone/Kconfig | 1 + > arch/arm/mach-keystone/pm_domain.c | 115 ++++++++++++++------- > 3 files changed, 110 insertions(+), 37 deletions(-) > create mode 100644 Documentation/devicetree/bindings/power/ti,keystone-gpc.txt > > diff --git a/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt b/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt > new file mode 100644 > index 0000000..43af1fc > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt > @@ -0,0 +1,31 @@ > +* TI Keystone 2 Generic PM Controller > + > +The TI Keystone 2 Generic PM Controller is responsible for Clock gating > +for each controlled IP module. > + > +Required properties: > +- compatible: Should be "ti,keystone-gpc" > +- #power-domain-cells: Should be 0, see below: > + > +The gpc node is a power-controller as documented by the generic power domain > +bindings in Documentation/devicetree/bindings/power/power_domain.txt. > + > +Example: > + > + pm_controller: pm-controller { > + compatible = "ti,keystone-gpc"; 'gpc' doesn't make it clear. May be 'keystone-powerdomain' ? > + #power-domain-cells = <0>; > + }; > + > + netcp: netcp@2090000 { > + reg = <0x2620110 0x8>; > + reg-names = "efuse"; > + ... > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + power-domains = <&pm_controller>; > + > + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; > + dma-coherent; > + } > diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig > index e571084..0132bde 100644 > --- a/arch/arm/mach-keystone/Kconfig > +++ b/arch/arm/mach-keystone/Kconfig > @@ -9,6 +9,7 @@ config ARCH_KEYSTONE > select COMMON_CLK_KEYSTONE > select ARCH_SUPPORTS_BIG_ENDIAN > select ZONE_DMA if ARM_LPAE > + select PM_GENERIC_DOMAINS if PM > help > Support for boards based on the Texas Instruments Keystone family of > SoCs. > diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c > index ca79dda..3eb5257 100644 > --- a/arch/arm/mach-keystone/pm_domain.c > +++ b/arch/arm/mach-keystone/pm_domain.c > @@ -12,69 +12,110 @@ > * version 2, as published by the Free Software Foundation. > */ > > +#include <linux/clk.h> > #include <linux/init.h> > -#include <linux/pm_runtime.h> > #include <linux/pm_clock.h> > +#include <linux/pm_domain.h> > #include <linux/platform_device.h> > -#include <linux/clk-provider.h> > #include <linux/of.h> > > -#ifdef CONFIG_PM_RUNTIME > -static int keystone_pm_runtime_suspend(struct device *dev) > +#ifdef CONFIG_PM_GENERIC_DOMAINS > + > +struct keystone_domain { > + struct generic_pm_domain base; > + struct device *dev; > +}; > + > +void keystone_pm_domain_attach_dev(struct device *dev) > { > + struct clk *clk; > int ret; > + int i = 0; > > dev_dbg(dev, "%s\n", __func__); > > - ret = pm_generic_runtime_suspend(dev); > - if (ret) > - return ret; > - > - ret = pm_clk_suspend(dev); > + ret = pm_clk_create(dev); > if (ret) { > - pm_generic_runtime_resume(dev); > - return ret; > + dev_err(dev, "pm_clk_create failed %d\n", ret); > + return; > + }; > + > + while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) { > + ret = pm_clk_add_clk(dev, clk); > + if (ret) { > + dev_err(dev, "pm_clk_add_clk failed %d\n", ret); > + goto clk_err; > + }; > } > > - return 0; > + if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { > + ret = pm_clk_resume(dev); > + if (ret) { > + dev_err(dev, "pm_clk_resume failed %d\n", ret); > + goto clk_err; > + }; > + } > + return; > + > +clk_err: > + pm_clk_destroy(dev); > } > > -static int keystone_pm_runtime_resume(struct device *dev) > +void keystone_pm_domain_detach_dev(struct device *dev) > { > dev_dbg(dev, "%s\n", __func__); > - > - pm_clk_resume(dev); > - > - return pm_generic_runtime_resume(dev); > + pm_clk_destroy(dev); > } > -#endif > > -static struct dev_pm_domain keystone_pm_domain = { > - .ops = { > - SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend, > - keystone_pm_runtime_resume, NULL) > - USE_PLATFORM_PM_SLEEP_OPS > +static const struct keystone_domain keystone_domain = { > + .base = { > + .name = "keystone", > + .attach_dev = keystone_pm_domain_attach_dev, > + .detach_dev = keystone_pm_domain_detach_dev, > + .dev_ops = { > + .stop = pm_clk_suspend, > + .start = pm_clk_resume, > + }, > + .power_off_latency_ns = 25000, > + .power_on_latency_ns = 2000000, Did you cook up these numbers ? Other than that patch looks fine to me. If Kevin is happy with overall approach then we can proceed with this. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Grygorii, On 9/29/14 7:38 AM, Grygorii Strashko wrote: > This patch switches Keystone 2 PM code to use Generic PM domains > instead of PM clock domains because of the lack of DT support > for the last. > > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> IMO, this approach is much better. One minor nit below... > diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c > index ca79dda..3eb5257 100644 > --- a/arch/arm/mach-keystone/pm_domain.c > +++ b/arch/arm/mach-keystone/pm_domain.c > @@ -12,69 +12,110 @@ > * version 2, as published by the Free Software Foundation. > */ > > +#include <linux/clk.h> > #include <linux/init.h> > -#include <linux/pm_runtime.h> > #include <linux/pm_clock.h> > +#include <linux/pm_domain.h> > #include <linux/platform_device.h> > -#include <linux/clk-provider.h> > #include <linux/of.h> > > -#ifdef CONFIG_PM_RUNTIME > -static int keystone_pm_runtime_suspend(struct device *dev) > +#ifdef CONFIG_PM_GENERIC_DOMAINS > + > +struct keystone_domain { > + struct generic_pm_domain base; > + struct device *dev; > +}; I think the name 'base' for this field leads to confusion later in the code, since base usually means something else in drivers. How about 'genpd'? Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/2/14 12:17 PM, Santosh Shilimkar wrote: > On Monday 29 September 2014 10:38 AM, Grygorii Strashko wrote: >> This patch switches Keystone 2 PM code to use Generic PM domains >> instead of PM clock domains because of the lack of DT support >> for the last. >> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> >> --- [...] >> Other than that patch looks fine to me. If Kevin is happy >> with overall approach then we can proceed with this. Looks good to me: Reviewed-by: Kevin Hilman <khilman@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/12/2014 03:56 PM, Kevin Hilman wrote: > Hi Grygorii, > > On 9/29/14 7:38 AM, Grygorii Strashko wrote: >> This patch switches Keystone 2 PM code to use Generic PM domains >> instead of PM clock domains because of the lack of DT support >> for the last. >> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> > > IMO, this approach is much better. > > One minor nit below... > >> diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c >> index ca79dda..3eb5257 100644 >> --- a/arch/arm/mach-keystone/pm_domain.c >> +++ b/arch/arm/mach-keystone/pm_domain.c >> @@ -12,69 +12,110 @@ >> * version 2, as published by the Free Software Foundation. >> */ >> >> +#include <linux/clk.h> >> #include <linux/init.h> >> -#include <linux/pm_runtime.h> >> #include <linux/pm_clock.h> >> +#include <linux/pm_domain.h> >> #include <linux/platform_device.h> >> -#include <linux/clk-provider.h> >> #include <linux/of.h> >> >> -#ifdef CONFIG_PM_RUNTIME >> -static int keystone_pm_runtime_suspend(struct device *dev) >> +#ifdef CONFIG_PM_GENERIC_DOMAINS >> + >> +struct keystone_domain { >> + struct generic_pm_domain base; >> + struct device *dev; >> +}; > > I think the name 'base' for this field leads to confusion later in the > code, since base usually means something else in drivers. How about > 'genpd'? Agree. I'll change it. Thanks for your comments. Regards, -grygorii -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt b/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt new file mode 100644 index 0000000..43af1fc --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti,keystone-gpc.txt @@ -0,0 +1,31 @@ +* TI Keystone 2 Generic PM Controller + +The TI Keystone 2 Generic PM Controller is responsible for Clock gating +for each controlled IP module. + +Required properties: +- compatible: Should be "ti,keystone-gpc" +- #power-domain-cells: Should be 0, see below: + +The gpc node is a power-controller as documented by the generic power domain +bindings in Documentation/devicetree/bindings/power/power_domain.txt. + +Example: + + pm_controller: pm-controller { + compatible = "ti,keystone-gpc"; + #power-domain-cells = <0>; + }; + + netcp: netcp@2090000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + ... + #address-cells = <1>; + #size-cells = <1>; + ranges; + power-domains = <&pm_controller>; + + clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + } diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index e571084..0132bde 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -9,6 +9,7 @@ config ARCH_KEYSTONE select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN select ZONE_DMA if ARM_LPAE + select PM_GENERIC_DOMAINS if PM help Support for boards based on the Texas Instruments Keystone family of SoCs. diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index ca79dda..3eb5257 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -12,69 +12,110 @@ * version 2, as published by the Free Software Foundation. */ +#include <linux/clk.h> #include <linux/init.h> -#include <linux/pm_runtime.h> #include <linux/pm_clock.h> +#include <linux/pm_domain.h> #include <linux/platform_device.h> -#include <linux/clk-provider.h> #include <linux/of.h> -#ifdef CONFIG_PM_RUNTIME -static int keystone_pm_runtime_suspend(struct device *dev) +#ifdef CONFIG_PM_GENERIC_DOMAINS + +struct keystone_domain { + struct generic_pm_domain base; + struct device *dev; +}; + +void keystone_pm_domain_attach_dev(struct device *dev) { + struct clk *clk; int ret; + int i = 0; dev_dbg(dev, "%s\n", __func__); - ret = pm_generic_runtime_suspend(dev); - if (ret) - return ret; - - ret = pm_clk_suspend(dev); + ret = pm_clk_create(dev); if (ret) { - pm_generic_runtime_resume(dev); - return ret; + dev_err(dev, "pm_clk_create failed %d\n", ret); + return; + }; + + while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) { + ret = pm_clk_add_clk(dev, clk); + if (ret) { + dev_err(dev, "pm_clk_add_clk failed %d\n", ret); + goto clk_err; + }; } - return 0; + if (!IS_ENABLED(CONFIG_PM_RUNTIME)) { + ret = pm_clk_resume(dev); + if (ret) { + dev_err(dev, "pm_clk_resume failed %d\n", ret); + goto clk_err; + }; + } + return; + +clk_err: + pm_clk_destroy(dev); } -static int keystone_pm_runtime_resume(struct device *dev) +void keystone_pm_domain_detach_dev(struct device *dev) { dev_dbg(dev, "%s\n", __func__); - - pm_clk_resume(dev); - - return pm_generic_runtime_resume(dev); + pm_clk_destroy(dev); } -#endif -static struct dev_pm_domain keystone_pm_domain = { - .ops = { - SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend, - keystone_pm_runtime_resume, NULL) - USE_PLATFORM_PM_SLEEP_OPS +static const struct keystone_domain keystone_domain = { + .base = { + .name = "keystone", + .attach_dev = keystone_pm_domain_attach_dev, + .detach_dev = keystone_pm_domain_detach_dev, + .dev_ops = { + .stop = pm_clk_suspend, + .start = pm_clk_resume, + }, + .power_off_latency_ns = 25000, + .power_on_latency_ns = 2000000, }, }; -static struct pm_clk_notifier_block platform_domain_notifier = { - .pm_domain = &keystone_pm_domain, +static int keystone_pm_domain_probe(struct platform_device *pdev) +{ + struct keystone_domain *domain; + + domain = devm_kzalloc(&pdev->dev, + sizeof(struct keystone_domain), GFP_KERNEL); + if (!domain) + return -ENOMEM; + + domain->base = keystone_domain.base; + domain->base.of_node = pdev->dev.of_node; + domain->dev = &pdev->dev; + + pm_genpd_init(&domain->base, NULL, false); + return of_genpd_add_provider_simple(pdev->dev.of_node, &domain->base); +} + +static struct of_device_id keystone_pm_domain_dt_ids[] = { + { .compatible = "ti,keystone-gpc" }, + { } }; -static struct of_device_id of_keystone_table[] = { - {.compatible = "ti,keystone"}, - { /* end of list */ }, +static struct platform_driver keystone_pm_domain_driver = { + .driver = { + .name = "ti,keystone-gpc", + .owner = THIS_MODULE, + .of_match_table = keystone_pm_domain_dt_ids, + }, + .probe = keystone_pm_domain_probe, }; int __init keystone_pm_runtime_init(void) { - struct device_node *np; - - np = of_find_matching_node(NULL, of_keystone_table); - if (!np) - return 0; - - pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier); - - return 0; + return platform_driver_register(&keystone_pm_domain_driver); } +#else +int __init keystone_pm_runtime_init(void) { return 0; } +#endif /* CONFIG_PM_GENERIC_DOMAINS */
This patch switches Keystone 2 PM code to use Generic PM domains instead of PM clock domains because of the lack of DT support for the last. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- .../devicetree/bindings/power/ti,keystone-gpc.txt | 31 ++++++ arch/arm/mach-keystone/Kconfig | 1 + arch/arm/mach-keystone/pm_domain.c | 115 ++++++++++++++------- 3 files changed, 110 insertions(+), 37 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/ti,keystone-gpc.txt