| Message ID | 1411801899-5236-1-git-send-email-linux@rempel-privat.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Ulf, providing proper changes for bounce buffer will take some time. I assume it will be probably long time project. Can you please review/ack(?) this driver, so i can sleep good at night :) Am 27.09.2014 um 09:11 schrieb Oleksij Rempel: > This driver is based on documentation which was based on my RE-work and > comparision with other MMC drivers. > It works in legacy mode and can provide 20MB/s R/W spead for most modern > SD cards, even if at least 40MB/s should be possible on this hardware. > It was not possible provide description for all register. But some of them > are important to make this hardware work in some unknown way. > > Biggest part of RE-work was done by emulating AU6601 in QEMU. > > Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> > --- > drivers/mmc/host/Kconfig | 8 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/au6601.c | 1215 +++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1224 insertions(+) > create mode 100644 drivers/mmc/host/au6601.c > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig > index 779368b..630a4ee 100644 > --- a/drivers/mmc/host/Kconfig > +++ b/drivers/mmc/host/Kconfig > @@ -315,6 +315,14 @@ config MMC_WBSD > > If unsure, say N. > > +config MMC_AU6601 > + tristate "Alcor Micro AU6601" > + help > + This selects the Alcor Micro Multimedia card interface. > + > + If unsure, say N. > + > + > config MMC_AU1X > tristate "Alchemy AU1XX0 MMC Card Interface support" > depends on MIPS_ALCHEMY > diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile > index 61cbc24..b2aab60 100644 > --- a/drivers/mmc/host/Makefile > +++ b/drivers/mmc/host/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o > obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o > obj-$(CONFIG_MMC_WBSD) += wbsd.o > obj-$(CONFIG_MMC_AU1X) += au1xmmc.o > +obj-$(CONFIG_MMC_AU6601) += au6601.o > obj-$(CONFIG_MMC_OMAP) += omap.o > obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o > obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o > diff --git a/drivers/mmc/host/au6601.c b/drivers/mmc/host/au6601.c > new file mode 100644 > index 0000000..1b9b46d > --- /dev/null > +++ b/drivers/mmc/host/au6601.c > @@ -0,0 +1,1215 @@ > +/* > + * Copyright (C) 2014 Oleksij Rempel. > + * > + * Authors: Oleksij Rempel <linux@rempel-privat.de> > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > + > +#include <linux/delay.h> > +#include <linux/pci.h> > +#include <linux/module.h> > +#include <linux/io.h> > +#include <linux/pm.h> > +#include <linux/irq.h> > +#include <linux/interrupt.h> > + > +#include <linux/mmc/host.h> > +#include <linux/mmc/mmc.h> > + > +#define DRVNAME "au6601-pci" > +#define PCI_ID_ALCOR_MICRO 0x1aea > +#define PCI_ID_AU6601 0x6601 > + > +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) > + > +#define AU6601_MIN_CLOCK (150 * 1000) > +#define AU6601_MAX_CLOCK MHZ_TO_HZ(208) > +#define AU6601_MAX_SEGMENTS 512 > +#define AU6601_MAX_BLOCK_LENGTH 512 > +#define AU6601_MAX_DMA_BLOCKS 8 > +#define AU6601_DMA_LOCAL_SEGMENTS 3 > +#define AU6601_MAX_BLOCK_COUNT 65536 > + > +/* SDMA phy address. Higer then 0x0800.0000? */ > +#define AU6601_REG_SDMA_ADDR 0x00 > + #define AU6601_SDMA_MASK 0xfffff000 > +/* ADMA block count? AU6621 only. */ > +#define REG_05 0x05 > +/* PIO */ > +#define AU6601_REG_BUFFER 0x08 > +/* ADMA ctrl? AU6621 only. */ > +#define REG_0C 0x0c > +/* ADMA phy address. AU6621 only. */ > +#define REG_10 0x10 > +/* CMD index */ > +#define AU6601_REG_CMD_OPCODE 0x23 > +/* CMD parametr */ > +#define AU6601_REG_CMD_ARG 0x24 > +/* CMD response 4x4 Bytes */ > +#define AU6601_REG_CMD_RSP0 0x30 > +#define AU6601_REG_CMD_RSP1 0x34 > +#define AU6601_REG_CMD_RSP2 0x38 > +#define AU6601_REG_CMD_RSP3 0x3C > +/* LED ctrl? */ > +#define REG_51 0x51 > +/* ??? */ > +#define REG_52 0x52 > +/* LED related? Always toggled BIT0 */ > +#define REG_61 0x61 > +/* Same as REG_61? */ > +#define REG_63 0x63 > +/* ??? */ > +#define REG_69 0x69 > +/* Block size for SDMA or PIO */ > +#define AU6601_REG_BLOCK_SIZE 0x6c > +/* Some power related reg, used together with REG_7A */ > +#define REG_70 0x70 > +/* PLL ctrl */ > +#define AU6601_REG_PLL_CTRL 0x72 > +/* ??? */ > +#define REG_74 0x74 > +/* ??? */ > +#define REG_75 0x75 > +/* card slot state? */ > +#define REG_76 0x76 > +/* ??? */ > +#define REG_77 0x77 > +/* looks like soft reset? */ > +#define AU6601_REG_SW_RESET 0x79 > + #define AU6601_RESET_UNK BIT(7) /* unknown bit */ > + #define AU6601_RESET_DATA BIT(3) > + #define AU6601_RESET_CMD BIT(0) > +/* see REG_70 */ > +#define REG_7A 0x7a > +/* ??? Padding? Timeing? */ > +#define REG_7B 0x7b > +/* ??? Padding? Timeing? */ > +#define REG_7C 0x7c > +/* ??? Padding? Timeing? */ > +#define REG_7D 0x7d > +/* read EEPROM? */ > +#define REG_7F 0x7f > + > +#define AU6601_REG_CMD_CTRL 0x81 > +#define AU6601_REG_BUS_CTRL 0x82 > + #define AU6601_BUS_WIDTH_4BIT BIT(5) > +#define REG_83 0x83 > + > +#define AU6601_REG_BUS_STATUS 0x84 > + #define AU6601_BUS_STAT_CMD BIT(15) > +/* BIT(4) - BIT(7) are permanently 1. > + * May be reseved or not attached DAT4-DAT7 */ > + #define AU6601_BUS_STAT_DAT3 BIT(3) > + #define AU6601_BUS_STAT_DAT2 BIT(2) > + #define AU6601_BUS_STAT_DAT1 BIT(1) > + #define AU6601_BUS_STAT_DAT0 BIT(0) > + #define AU6601_BUS_STAT_DAT_MASK 0xf > +#define REG_85 0x85 > +/* ??? */ > +#define REG_86 0x86 > +#define AU6601_REG_INT_STATUS 0x90 /* IRQ intmask */ > +#define AU6601_REG_INT_ENABLE 0x94 > +/* ??? */ > +#define REG_A1 0xa1 > +/* ??? */ > +#define REG_A2 0xa2 > +/* ??? */ > +#define REG_A3 0xa3 > +/* ??? */ > +#define REG_B0 0xb0 > +/* ??? */ > +#define REG_B4 0xb4 > + > + /* AU6601_REG_INT_STATUS is identical or almost identical with sdhci.h */ > + /* OK - are tested and confirmed bits */ > + #define AU6601_INT_RESPONSE 0x00000001 /* ok */ > + #define AU6601_INT_DATA_END 0x00000002 /* fifo, ok */ > + #define AU6601_INT_BLK_GAP 0x00000004 > + #define AU6601_INT_DMA_END 0x00000008 > + #define AU6601_INT_SPACE_AVAIL 0x00000010 /* fifo, ok */ > + #define AU6601_INT_DATA_AVAIL 0x00000020 /* fifo, ok */ > + #define AU6601_INT_CARD_REMOVE 0x00000040 > + #define AU6601_INT_CARD_INSERT 0x00000080 /* 0x40 and 0x80 flip */ > + #define AU6601_INT_CARD_INT 0x00000100 > + #define AU6601_INT_ERROR 0x00008000 /* ok */ > + #define AU6601_INT_TIMEOUT 0x00010000 /* seems to be ok */ > + #define AU6601_INT_CRC 0x00020000 /* seems to be ok */ > + #define AU6601_INT_END_BIT 0x00040000 > + #define AU6601_INT_INDEX 0x00080000 > + #define AU6601_INT_DATA_TIMEOUT 0x00100000 > + #define AU6601_INT_DATA_CRC 0x00200000 > + #define AU6601_INT_DATA_END_BIT 0x00400000 > + #define AU6601_INT_BUS_POWER 0x00800000 > + #define AU6601_INT_ACMD12ERR 0x01000000 > + #define AU6601_INT_ADMA_ERROR 0x02000000 > + > + #define AU6601_INT_NORMAL_MASK 0x00007FFF > + #define AU6601_INT_ERROR_MASK 0xFFFF8000 > + > +/* magic 0xF0001 */ > + #define AU6601_INT_CMD_MASK (AU6601_INT_RESPONSE | AU6601_INT_TIMEOUT | \ > + AU6601_INT_CRC | AU6601_INT_END_BIT | AU6601_INT_INDEX) > +/* magic 0x70003A */ > + #define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ > + AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL | \ > + AU6601_INT_DATA_TIMEOUT | AU6601_INT_DATA_CRC | \ > + AU6601_INT_DATA_END_BIT) > + #define AU6601_INT_ALL_MASK ((uint32_t)-1) > + > +bool disable_dma = 0; > + > +struct au6601_host { > + struct pci_dev *pdev; > + struct device *dev; > + void __iomem *iobase; > + void __iomem *virt_base; > + dma_addr_t phys_base; > + > + struct mmc_host *mmc; > + struct mmc_request *mrq; > + struct mmc_command *cmd; > + struct mmc_data *data; > + unsigned int data_early:1; /* Data finished before cmd */ > + unsigned int dma_on:1; > + unsigned int trigger_dma_dac:1; /* Trigger Data after Command. > + * In some cases data ragister > + * should be triggered after > + * command was done */ > + > + struct mutex cmd_mutex; > + > + struct timer_list timer; > + > + struct sg_mapping_iter sg_miter; /* SG state for PIO */ > + unsigned int blocks; /* remaining PIO blocks */ > + unsigned int requested_blocks; /* count of requested */ > + int sg_count; /* Mapped sg entries */ > +}; > + > +static void au6601_send_cmd(struct au6601_host *host, > + struct mmc_command *cmd); > + > +static void au6601_prepare_data(struct au6601_host *host, > + struct mmc_command *cmd); > +static void au6601_finish_data(struct au6601_host *host); > +static void au6601_request_complete(struct au6601_host *host); > + > +static const struct pci_device_id pci_ids[] = { > + { > + .vendor = PCI_ID_ALCOR_MICRO, > + .device = PCI_ID_AU6601, > + .subvendor = PCI_ANY_ID, > + .subdevice = PCI_ANY_ID, > + }, > + { /* end: all zeroes */ }, > +}; > +MODULE_DEVICE_TABLE(pci, pci_ids); > + > +static inline void au6601_rmw(void __iomem *reg, u32 clear, u32 set) > +{ > + u32 var; > + > + var = ioread32(reg); > + var &= ~clear; > + var |= set; > + iowrite32(var, reg); > +} > + > +static inline void au6601_mask_irqs(struct au6601_host *host) > +{ > + iowrite32(0, host->iobase + AU6601_REG_INT_ENABLE); > +} > + > +static inline void au6601_unmask_irqs(struct au6601_host *host) > +{ > + iowrite32(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | > + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | > + AU6601_INT_CARD_INT | AU6601_INT_BUS_POWER, > + host->iobase + AU6601_REG_INT_ENABLE); > +} > + > +static void au6601_clear_set_reg86(struct au6601_host *host, u32 clear, u32 set) > +{ > + au6601_rmw(host->iobase + REG_86, clear, set); > +} > + > +/* > + * check if one of data line is pulled down > + */ > +static inline int au6601_card_busy(struct au6601_host *host) > +{ > + u8 status; > + > + status = (ioread8(host->iobase + AU6601_REG_BUS_STATUS) & > + AU6601_BUS_STAT_DAT_MASK); > + /* If all data lines are up, then card is not busy */ > + if (status == (AU6601_BUS_STAT_DAT0 | AU6601_BUS_STAT_DAT1 | > + AU6601_BUS_STAT_DAT2 | AU6601_BUS_STAT_DAT3)) > + return 0; > + > + return 1; > +} > + > +/* val = 0x1 abort command; 0x8 abort data? */ > +static void au6601_reset(struct au6601_host *host, u8 val) > +{ > + int i; > + > + iowrite8(val | AU6601_RESET_UNK, host->iobase + AU6601_REG_SW_RESET); > + for (i = 0; i < 100; i++) { > + if (!(ioread8(host->iobase + AU6601_REG_SW_RESET) & val)) > + return; > + udelay(50); > + } > + dev_err(host->dev, "%s: timeout\n", __func__); > +} > + > +/* > + * - 0x8 only Vcc is on > + * - 0x1 Vcc and other pins are on > + * - 0x1 | 0x8 like 0x1, but DAT2 is off > + */ > +static void au6601_set_power(struct au6601_host *host, > + unsigned int value, unsigned int set) > +{ > + u8 tmp1, tmp2; > + > + tmp1 = ioread8(host->iobase + REG_70); > + tmp2 = ioread8(host->iobase + REG_7A); > + if (set) { > + iowrite8(tmp1 | value, host->iobase + REG_70); > + iowrite8(tmp2 | value, host->iobase + REG_7A); > + } else { > + iowrite8(tmp2 & ~value, host->iobase + REG_7A); > + iowrite8(tmp1 & ~value, host->iobase + REG_70); > + } > +} > + > +static void au6601_trigger_data_transfer(struct au6601_host *host, > + unsigned int dma) > +{ > + struct mmc_data *data = host->data; > + u8 ctrl = 0; > + > + if (data->flags & MMC_DATA_WRITE) > + ctrl |= 0x80; > + > + if (dma) { > + iowrite32(host->phys_base, host->iobase + AU6601_REG_SDMA_ADDR); > + ctrl |= 0x40; > + host->dma_on = 1; > + > + if (data->flags & MMC_DATA_WRITE) > + goto done; > + /* prepare first DMA buffer for write operation */ > + if (host->blocks > AU6601_MAX_DMA_BLOCKS) > + host->requested_blocks = AU6601_MAX_DMA_BLOCKS; > + else > + host->requested_blocks = host->blocks; > + > + } > + > +done: > + iowrite32(data->blksz * host->requested_blocks, > + host->iobase + AU6601_REG_BLOCK_SIZE); > + iowrite8(ctrl | 0x1, host->iobase + REG_83); > +} > + > +/*****************************************************************************\ > + * * > + * Core functions * > + * * > +\*****************************************************************************/ > + > +static void au6601_read_block(struct au6601_host *host) > +{ > + size_t blksize, len, chunk = 0; > + void __iomem *virt_base = host->virt_base; > + u8 *buf; > + > + dev_dbg(host->dev, "PIO reading\n"); > + > + blksize = host->data->blksz * host->requested_blocks; > + > + while (blksize) { > + if (!sg_miter_next(&host->sg_miter)) > + BUG(); > + > + len = min(host->sg_miter.length, blksize); > + > + blksize -= len; > + host->sg_miter.consumed = len; > + > + buf = host->sg_miter.addr; > + > + if (host->dma_on) { > + memcpy_fromio(buf, virt_base, len); > + virt_base += len; > + len = 0; > + } else { > + while (len) { > + u32 scratch; > + > + if (chunk == 0) { > + scratch = ioread32(host->iobase + > + AU6601_REG_BUFFER); > + chunk = 4; > + } > + > + *buf = scratch & 0xFF; > + > + buf++; > + scratch >>= 8; > + chunk--; > + len--; > + } > + } > + } > + > + sg_miter_stop(&host->sg_miter); > +} > + > +static void au6601_write_block(struct au6601_host *host) > +{ > + size_t blksize, len, chunk = 0; > + void __iomem *virt_base = host->virt_base; > + u32 scratch = 0; > + u8 *buf; > + > + dev_dbg(host->dev, "PIO writing\n"); > + > + blksize = host->data->blksz * host->requested_blocks; > + > + while (blksize) { > + if (!sg_miter_next(&host->sg_miter)) > + BUG(); > + > + len = min(host->sg_miter.length, blksize); > + > + blksize -= len; > + host->sg_miter.consumed = len; > + > + buf = host->sg_miter.addr; > + > + if (host->dma_on) { > + memcpy_toio(virt_base, buf, len); > + virt_base += len; > + len = 0; > + } else { > + while (len) { > + scratch |= (u32)*buf << (chunk * 8); > + > + buf++; > + chunk++; > + len--; > + > + if ((chunk == 4) || ((len == 0) > + && (blksize == 0))) { > + iowrite32(scratch, host->iobase + > + AU6601_REG_BUFFER); > + chunk = 0; > + scratch = 0; > + } > + } > + } > + } > + > + sg_miter_stop(&host->sg_miter); > +} > + > +static void au6601_transfer_data(struct au6601_host *host) > +{ > + if (host->blocks == 0) > + return; > + > + if (host->data->flags & MMC_DATA_READ) > + au6601_read_block(host); > + else > + au6601_write_block(host); > + > + host->blocks -= host->requested_blocks; > + if (host->dma_on) { > + host->dma_on = 0; > + if (host->blocks || (!host->blocks && > + (host->data->flags & MMC_DATA_WRITE))) > + au6601_trigger_data_transfer(host, 1); > + else > + au6601_finish_data(host); > + } > + > + dev_dbg(host->dev, "PIO transfer complete.\n"); > +} > + > +static void au6601_finish_command(struct au6601_host *host) > +{ > + struct mmc_command *cmd = host->cmd; > + > + if (host->cmd->flags & MMC_RSP_PRESENT) { > + cmd->resp[0] = ioread32be(host->iobase + AU6601_REG_CMD_RSP0); > + if (host->cmd->flags & MMC_RSP_136) { > + cmd->resp[1] = > + ioread32be(host->iobase + AU6601_REG_CMD_RSP1); > + cmd->resp[2] = > + ioread32be(host->iobase + AU6601_REG_CMD_RSP2); > + cmd->resp[3] = > + ioread32be(host->iobase + AU6601_REG_CMD_RSP3); > + } > + > + } > + > + host->cmd->error = 0; > + > + /* Finished CMD23, now send actual command. */ > + if (host->cmd == host->mrq->sbc) { > + host->cmd = NULL; > + au6601_send_cmd(host, host->mrq->cmd); > + } else { > + /* Processed actual command. */ > + if (!host->data) > + au6601_request_complete(host); > + else if (host->data_early) > + au6601_finish_data(host); > + else if (host->trigger_dma_dac) { > + host->dma_on = 1; > + au6601_transfer_data(host); > + } > + > + host->cmd = NULL; > + } > +} > + > +static void au6601_finish_data(struct au6601_host *host) > +{ > + struct mmc_data *data; > + > + data = host->data; > + host->data = NULL; > + host->dma_on = 0; > + host->trigger_dma_dac = 0; > + > + /* > + * The specification states that the block count register must > + * be updated, but it does not specify at what point in the > + * data flow. That makes the register entirely useless to read > + * back so we have to assume that nothing made it to the card > + * in the event of an error. > + */ > + if (data->error) > + data->bytes_xfered = 0; > + else > + data->bytes_xfered = data->blksz * data->blocks; > + > + /* > + * Need to send CMD12 if - > + * a) open-ended multiblock transfer (no CMD23) > + * b) error in multiblock transfer > + */ > + if (data->stop && > + (data->error || > + !host->mrq->sbc)) { > + > + /* > + * The controller needs a reset of internal state machines > + * upon error conditions. > + */ > + if (data->error) { > + au6601_reset(host, AU6601_RESET_CMD); > + au6601_reset(host, AU6601_RESET_DATA); > + } > + au6601_send_cmd(host, data->stop); > + } else > + au6601_request_complete(host); > +} > + > +static void au6601_prepare_sg_miter(struct au6601_host *host) > +{ > + unsigned int flags = SG_MITER_ATOMIC; > + struct mmc_data *data = host->data; > + > + if (data->flags & MMC_DATA_READ) > + flags |= SG_MITER_TO_SG; > + else > + flags |= SG_MITER_FROM_SG; > + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); > +} > + > +static void au6601_prepare_data(struct au6601_host *host, > + struct mmc_command *cmd) > +{ > + unsigned int dma = 0; > + struct mmc_data *data = cmd->data; > + > + if (!data) > + return; > + > + /* Sanity checks */ > + BUG_ON(data->blksz * data->blocks > 524288); > + BUG_ON(data->blksz > host->mmc->max_blk_size); > + BUG_ON(data->blocks > AU6601_MAX_BLOCK_COUNT); > + > + host->data = data; > + host->data_early = 0; > + host->data->bytes_xfered = 0; > + host->requested_blocks = 1; > + > + au6601_prepare_sg_miter(host); > + host->blocks = data->blocks; > + > + if (!disable_dma && > + host->blocks > 1 && > + data->blksz == host->mmc->max_blk_size) { > + dma = 1; > + > + if (data->flags & MMC_DATA_WRITE) { > + /* prepare first write buffer */ > + /* Don't trigger data transfer now. > + * DMA may start it too eraly */ > + host->trigger_dma_dac = 1; > + return; > + } > + } > + > + au6601_trigger_data_transfer(host, dma); > +} > + > +static void au6601_send_cmd(struct au6601_host *host, > + struct mmc_command *cmd) > +{ > + u8 ctrl; /*some mysterious flags and control */ > + unsigned long timeout; > + > + timeout = jiffies; > + if (!cmd->data && cmd->busy_timeout > 9000) > + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; > + else > + timeout += 10 * HZ; > + mod_timer(&host->timer, timeout); > + > + host->cmd = cmd; > + au6601_prepare_data(host, cmd); > + > + iowrite8(cmd->opcode | 0x40, host->iobase + AU6601_REG_CMD_OPCODE); > + iowrite32be(cmd->arg, host->iobase + AU6601_REG_CMD_ARG); > + > + switch (mmc_resp_type(cmd)) { > + case MMC_RSP_NONE: > + ctrl = 0; > + break; > + case MMC_RSP_R1: > + ctrl = 0x40; > + break; > + case MMC_RSP_R1B: > + ctrl = 0x40 | 0x10; > + break; > + case MMC_RSP_R2: > + ctrl = 0xc0; > + break; > + case MMC_RSP_PRESENT | MMC_RSP_OPCODE: > + case MMC_RSP_R3: > + ctrl = 0x80; > + break; > + default: > + dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n", > + mmc_hostname(host->mmc), mmc_resp_type(cmd)); > + break; > + } > + > + iowrite8(ctrl | 0x20, host->iobase + AU6601_REG_CMD_CTRL); > +} > + > +/*****************************************************************************\ > + * * > + * Interrupt handling * > + * * > +\*****************************************************************************/ > + > +static void au6601_cmd_irq(struct au6601_host *host, u32 intmask) > +{ > + if (!host->cmd) { > + dev_err(host->dev, > + "Got command interrupt 0x%08x even though no command operation was in progress.\n", > + intmask); > + return; > + } > + > + if (intmask & AU6601_INT_TIMEOUT) > + host->cmd->error = -ETIMEDOUT; > + else if (intmask & (AU6601_INT_CRC | AU6601_INT_END_BIT | > + AU6601_INT_INDEX)) > + host->cmd->error = -EILSEQ; > + > + if (host->cmd->error) { > + au6601_request_complete(host); > + return; > + } > + > + /* > + * The host can send and interrupt when the busy state has > + * ended, allowing us to wait without wasting CPU cycles. > + * Unfortunately this is overloaded on the "data complete" > + * interrupt, so we need to take some care when handling > + * it. > + * > + * Note: The 1.0 specification is a bit ambiguous about this > + * feature so there might be some problems with older > + * controllers. > + */ > + if (host->cmd->flags & MMC_RSP_BUSY) { > + if (host->cmd->data) > + dev_warn(host->dev, > + "Cannot wait for busy signal when also doing a data transfer"); > + } > + > + if (intmask & AU6601_INT_RESPONSE) > + au6601_finish_command(host); > +} > + > +static void au6601_data_irq(struct au6601_host *host, u32 intmask) > +{ > + if (!host->data) { > + /* FIXME: Ist is same for AU6601 > + * The "data complete" interrupt is also used to > + * indicate that a busy state has ended. See comment > + * above in au6601_cmd_irq(). > + */ > + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { > + if (intmask & AU6601_INT_DATA_END) { > + au6601_finish_command(host); > + return; > + } > + } > + > + dev_err(host->dev, > + "Got data interrupt 0x%08x even though no data operation was in progress.\n", > + (unsigned)intmask); > + > + if (intmask & AU6601_INT_ERROR_MASK) { > + host->cmd->error = -ETIMEDOUT; > + au6601_request_complete(host); > + } > + return; > + } > + > + if (intmask & AU6601_INT_DATA_TIMEOUT) > + host->data->error = -ETIMEDOUT; > + else if (intmask & AU6601_INT_DATA_END_BIT) > + host->data->error = -EILSEQ; > + else if (intmask & AU6601_INT_DATA_CRC) > + host->data->error = -EILSEQ; > + > + if (host->data->error) > + au6601_finish_data(host); > + else { > + if (intmask & (AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL)) > + au6601_transfer_data(host); > + > + if (intmask & AU6601_INT_DATA_END) { > + if (host->cmd) { > + /* > + * Data managed to finish before the > + * command completed. Make sure we do > + * things in the proper order. > + */ > + host->data_early = 1; > + } else if (host->blocks && !host->dma_on) { > + /* > + * Probably we do multi block operation. > + * Prepare PIO for next block. > + */ > + au6601_trigger_data_transfer(host, 0); > + } else if (host->blocks && host->dma_on) { > + au6601_transfer_data(host); > + } else { > + if (host->dma_on) > + au6601_transfer_data(host); > + au6601_finish_data(host); > + } > + } > + } > +} > + > +static irqreturn_t au6601_irq(int irq, void *d) > +{ > + struct au6601_host *host = d; > + irqreturn_t ret = IRQ_HANDLED; > + u32 intmask; > + > + mutex_lock(&host->cmd_mutex); > + > + intmask = ioread32(host->iobase + AU6601_REG_INT_STATUS); > + iowrite32(intmask, host->iobase + AU6601_REG_INT_STATUS); > + > + /* some thing bad */ > + if (unlikely(!intmask || intmask == AU6601_INT_ALL_MASK)) { > + ret = IRQ_NONE; > + goto exit; > + } > + > + if (intmask & AU6601_INT_CMD_MASK) { > + dev_dbg(host->dev, "CMD IRQ %x\n", intmask); > + > + au6601_cmd_irq(host, intmask & AU6601_INT_CMD_MASK); > + intmask &= ~AU6601_INT_CMD_MASK; > + } > + > + if (intmask & AU6601_INT_DATA_MASK) { > + dev_dbg(host->dev, "DATA IRQ %x\n", intmask); > + au6601_data_irq(host, intmask & AU6601_INT_DATA_MASK); > + intmask &= ~AU6601_INT_DATA_MASK; > + } > + > + if (intmask & (AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE)) { > + /* this check can be remove */ > + if (intmask & AU6601_INT_CARD_REMOVE) > + dev_dbg(host->dev, "card removed\n"); > + else > + dev_dbg(host->dev, "card inserted\n"); > + > + intmask &= ~(AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE); > + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); > + } > + > + if (intmask & 0x100) { > + dev_warn(host->dev, > + "0x100 (card INT?) got unknown IRQ with %x\n", > + intmask); > + intmask &= ~0x100; > + } > + > + if (intmask & 0xFFFF7FFF) { > + dev_warn(host->dev, "0xFFFF7FFF got unhandled IRQ with %x\n", > + intmask); > + } > + > +exit: > + mutex_unlock(&host->cmd_mutex); > + return ret; > +} > + > +static void au6601_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq) > +{ > + struct au6601_host *host; > + > + host = mmc_priv(mmc); > + mutex_lock(&host->cmd_mutex); > + > + host->mrq = mrq; > + > + /* check if card is present then send command and data */ > + if (ioread8(host->iobase + REG_76) & 0x1) > + au6601_send_cmd(host, mrq->cmd); > + else { > + mrq->cmd->error = -ENOMEDIUM; > + au6601_request_complete(host); > + } > + > + mutex_unlock(&host->cmd_mutex); > +} > + > +static void au6601_set_clock(struct au6601_host *host, unsigned int clock) > +{ > + unsigned int div = 0, mult = 0, ctrl = 0x1; > + > + /* FIXME: mesuered and calculated values are different. > + * the clock is unstable in some mult/div combinations. > + */ > + if (clock >= MHZ_TO_HZ(208)) { > + mult = 0xb0; /* 30 * ? / 2 = ?MHz */ > + div = 2; > + } else if (clock >= MHZ_TO_HZ(194)) { > + mult = 0x30; /* 30 * 14 / 2 = 210MHz */ > + div = 2; > + } else if (clock >= MHZ_TO_HZ(130)) { > + mult = 0x30; /* 30 * 14 / 3 = 140MHz */ > + div = 3; > + } else if (clock >= MHZ_TO_HZ(100)) { > + mult = 0x30; /* 30 * 14 / 4 = 105MHz */ > + div = 4; > + } else if (clock >= MHZ_TO_HZ(80)) { > + mult = 0x30; /* 30 * 14 / 5 = 84MHz */ > + div = 5; > + } else if (clock >= MHZ_TO_HZ(60)) { > + mult = 0x30; /* 30 * 14 / 7 = 60MHz */ > + div = 7; > + } else if (clock >= MHZ_TO_HZ(50)) { > + mult = 0x10; /* 30 * 2 / 1 = 60MHz */ > + div = 1; > + } else if (clock >= MHZ_TO_HZ(40)) { > + mult = 0x30; /* 30 * 14 / 10 = 42MHz */ > + div = 10; > + } else if (clock >= MHZ_TO_HZ(25)) { > + mult = 0x10; /* 30 * 2 / 2 = 30MHz */ > + div = 2; > + } else if (clock >= MHZ_TO_HZ(20)) { > + mult = 0x20; /* 30 * 4 / 7 = 17MHz */ > + div = 7; > + } else if (clock >= MHZ_TO_HZ(10)) { > + mult = 0x10; /* 30 * 2 / 5 = 12MHz */ > + div = 5; > + } else if (clock >= MHZ_TO_HZ(5)) { > + mult = 0x10; /* 30 * 2 / 10 = 6MHz */ > + div = 10; > + } else if (clock >= MHZ_TO_HZ(1)) { > + mult = 0x0; /* 30 / 16 = 1,8 MHz */ > + div = 16; > + } else if (clock == 0) { > + ctrl = 0; > + } else { > + mult = 0x0; /* reversed 150 * 200 = 30MHz */ > + div = 200; /* 150 KHZ mesured */ > + } > + dev_dbg(host->dev, "set freq %d, %x, %x\n", clock, div, mult); > + iowrite16((div - 1) << 8 | mult | ctrl, > + host->iobase + AU6601_REG_PLL_CTRL); > +} > + > +static void au6601_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > +{ > + struct au6601_host *host; > + > + host = mmc_priv(mmc); > + mutex_lock(&host->cmd_mutex); > + > + iowrite8(0, host->iobase + REG_85); > + iowrite8(0x31, host->iobase + REG_7B); > + iowrite8(0x33, host->iobase + REG_7C); > + iowrite8(1, host->iobase + REG_75); > + iowrite8(0, host->iobase + REG_85); > + > + if (ios->bus_width == MMC_BUS_WIDTH_1) { > + iowrite8(0x0, > + host->iobase + AU6601_REG_BUS_CTRL); > + au6601_clear_set_reg86(host, 0xc0, 0); > + } else if (ios->bus_width == MMC_BUS_WIDTH_4) { > + iowrite8(AU6601_BUS_WIDTH_4BIT, > + host->iobase + AU6601_REG_BUS_CTRL); > + au6601_clear_set_reg86(host, 0, 0xc0); > + } else > + dev_err(host->dev, "Unknown BUS mode\n"); > + > + au6601_set_clock(host, ios->clock); > + > + switch (ios->power_mode) { > + case MMC_POWER_OFF: > + au6601_set_power(host, 0x1 | 0x8, 0); > + break; > + case MMC_POWER_UP: > + au6601_set_power(host, 0x8, 1); > + break; > + case MMC_POWER_ON: > + au6601_set_power(host, 0x1, 1); > + au6601_set_power(host, 0x8, 0); > + break; > + default: > + dev_err(host->dev, "Unknown power parametr\n"); > + } > + > + iowrite8(0x80, host->iobase + REG_83); > + iowrite8(0x7d, host->iobase + REG_69); > + ioread8(host->iobase + REG_74); > + mutex_unlock(&host->cmd_mutex); > +} > + > +static int au6601_ops_card_busy(struct mmc_host *mmc) > +{ > + struct au6601_host *host = mmc_priv(mmc); > + > + return au6601_card_busy(host); > +} > + > +static const struct mmc_host_ops au6601_sdc_ops = { > + .request = au6601_sdc_request, > + .set_ios = au6601_sdc_set_ios, > + > + .card_busy = au6601_ops_card_busy, > +}; > + > +static void au6601_request_complete(struct au6601_host *host) > +{ > + struct mmc_request *mrq; > + > + /* > + * If this tasklet gets rescheduled while running, it will > + * be run again afterwards but without any active request. > + */ > + if (!host->mrq) > + return; > + > + del_timer(&host->timer); > + > + mrq = host->mrq; > + > + /* > + * The controller needs a reset of internal state machines > + * upon error conditions. > + */ > + if ((mrq->cmd && mrq->cmd->error) || > + (mrq->data && (mrq->data->error || > + (mrq->data->stop && mrq->data->stop->error)))) { > + > + au6601_reset(host, AU6601_RESET_CMD); > + au6601_reset(host, AU6601_RESET_DATA); > + } > + > + host->mrq = NULL; > + host->cmd = NULL; > + host->data = NULL; > + host->dma_on = 0; > + host->trigger_dma_dac = 0; > + > + mmc_request_done(host->mmc, mrq); > +} > + > +static void au6601_timeout_timer(unsigned long data) > +{ > + struct au6601_host *host; > + > + host = (struct au6601_host *)data; > + > + mutex_lock(&host->cmd_mutex); > + > + if (host->mrq) { > + dev_err(host->dev, > + "Timeout waiting for hardware interrupt.\n"); > + > + if (host->data) { > + host->data->error = -ETIMEDOUT; > + au6601_finish_data(host); > + } else { > + if (host->cmd) > + host->cmd->error = -ETIMEDOUT; > + else > + host->mrq->cmd->error = -ETIMEDOUT; > + > + au6601_request_complete(host); > + } > + } > + > + mmiowb(); > + mutex_unlock(&host->cmd_mutex); > +} > + > + > + > +static void au6601_init_mmc(struct au6601_host *host) > +{ > + struct mmc_host *mmc = host->mmc; > + > + mmc->f_min = AU6601_MIN_CLOCK; > + mmc->f_max = AU6601_MAX_CLOCK; > + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; > + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY; > + mmc->ops = &au6601_sdc_ops; > + > + /* Hardware cannot do scatter lists? */ > + mmc->max_segs = AU6601_MAX_SEGMENTS; > + > + mmc->max_blk_size = AU6601_MAX_BLOCK_LENGTH; > + mmc->max_blk_count = AU6601_MAX_BLOCK_COUNT; > + > + mmc->max_seg_size = AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS; > + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; > +} > + > +static void au6601_hw_init(struct au6601_host *host) > +{ > + > + iowrite8(0, host->iobase + REG_74); > + > + iowrite8(0, host->iobase + REG_76); > + /* disable DlinkMode? disabled by default. */ > + iowrite8(0x80, host->iobase + REG_76); > + > + au6601_reset(host, AU6601_RESET_CMD); > + > + iowrite8(0x0, host->iobase + REG_05); > + iowrite8(0x1, host->iobase + REG_75); > + > + au6601_unmask_irqs(host); > + > + iowrite32(0x0, host->iobase + AU6601_REG_BUS_CTRL); > + > + au6601_reset(host, AU6601_RESET_DATA); > + > + iowrite8(0x0, host->iobase + REG_05); > + iowrite8(0x0, host->iobase + REG_85); > + iowrite8(0x8, host->iobase + REG_75); > + iowrite32(0x3d00fa, host->iobase + REG_B4); > + > + au6601_set_power(host, 0x1, 0); > + au6601_set_power(host, 0x8, 0); > + > + host->dma_on = 0; > +} > + > +static int __init au6601_dma_alloc(struct au6601_host *host) > +{ > + int ret; > + > + ret = pci_set_dma_mask(host->pdev, AU6601_SDMA_MASK); > + if (ret) { > + dev_err(host->dev, "Failed to set DMA mask\n"); > + return ret; > + } > + > + host->virt_base = dmam_alloc_coherent(host->dev, > + AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS * AU6601_DMA_LOCAL_SEGMENTS, > + &host->phys_base, GFP_KERNEL); > + > + if (!host->virt_base) { > + dev_err(host->dev, "Failed to alloc DMA\n"); > + return -ENOMEM; > + } > + > + return 0; > +} > + > +static int __init au6601_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct mmc_host *mmc; > + struct au6601_host *host; > + int ret, bar = 0; > + > + dev_info(&pdev->dev, "AU6601 controller found [%04x:%04x] (rev %x)\n", > + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); > + > + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { > + dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); > + return -ENODEV; > + } > + > + > + ret = pcim_enable_device(pdev); > + if (ret) > + return ret; > + > + /* FIXME: create managed version of mmc_alloc_host and use it */ > + mmc = mmc_alloc_host(sizeof(struct au6601_host *), &pdev->dev); > + if (!mmc) { > + dev_err(&pdev->dev, "Can't allocate MMC\n"); > + return -ENOMEM; > + } > + > + host = mmc_priv(mmc); > + host->mmc = mmc; > + host->pdev = pdev; > + host->dev = &pdev->dev; > + > + ret = pci_request_region(pdev, bar, DRVNAME); > + if (ret) { > + dev_err(&pdev->dev, "Cannot request region\n"); > + return -ENOMEM; > + } > + > + host->iobase = pcim_iomap(pdev, bar, 0); > + if (!host->iobase) > + return -ENOMEM; > + > + ret = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL, au6601_irq, > + IRQF_ONESHOT, "au6601 host", > + host); > + > + if (ret) { > + dev_err(&pdev->dev, "Failed to get irq for data line\n"); > + return -ENOMEM; > + } > + > + ret = au6601_dma_alloc(host); > + if (ret) > + return ret; > + > + pci_set_master(pdev); > + pci_set_drvdata(pdev, host); > + > + mutex_init(&host->cmd_mutex); > + /* > + * Init tasklets. > + */ > + setup_timer(&host->timer, au6601_timeout_timer, (unsigned long)host); > + > + au6601_init_mmc(host); > + au6601_hw_init(host); > + > + mmc_add_host(mmc); > + return 0; > +} > + > +static void au6601_hw_uninit(struct au6601_host *host) > +{ > + iowrite8(0x0, host->iobase + REG_76); > + au6601_mask_irqs(host); > + > + au6601_set_power(host, 0x1, 0); > + > + iowrite8(0x0, host->iobase + REG_85); > + iowrite8(0x0, host->iobase + REG_B4); > + > + au6601_set_power(host, 0x8, 0); > +} > + > +static void __exit au6601_pci_remove(struct pci_dev *pdev) > +{ > + struct au6601_host *host; > + > + host = pci_get_drvdata(pdev); > + > + au6601_hw_uninit(host); > + > + del_timer_sync(&host->timer); > + > + mmc_remove_host(host->mmc); > + mmc_free_host(host->mmc); > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int au6601_suspend(struct device *dev) > +{ > + struct pci_dev *pdev = to_pci_dev(dev); > + struct au6601_host *host = pci_get_drvdata(pdev); > + > + au6601_hw_uninit(host); > + return 0; > +} > + > +static int au6601_resume(struct device *dev) > +{ > + > + struct pci_dev *pdev = to_pci_dev(dev); > + struct au6601_host *host = pci_get_drvdata(pdev); > + > + au6601_hw_init(host); > + return 0; > +} > +#endif /* CONFIG_PM_SLEEP */ > + > +static SIMPLE_DEV_PM_OPS(au6601_pm_ops, au6601_suspend, au6601_resume); > + > +static struct pci_driver au6601_driver = { > + .name = DRVNAME, > + .id_table = pci_ids, > + .probe = au6601_pci_probe, > + .remove = au6601_pci_remove, > + .driver = { > + .pm = &au6601_pm_ops > + }, > +}; > + > +module_pci_driver(au6601_driver); > + > +module_param(disable_dma, bool, S_IRUGO); > +MODULE_PARM_DESC(disable_dma, "Disable DMA"); > + > +MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); > +MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface"); > +MODULE_LICENSE("GPL"); >
On 8 October 2014 08:58, Oleksij Rempel <linux@rempel-privat.de> wrote: > Hi Ulf, > > providing proper changes for bounce buffer will take some time. I assume > it will be probably long time project. > Can you please review/ack(?) this driver, so i can sleep good at night :) I will look into it after the merge window, sorry for taking so long. I would also like to encourage other mmc people to help out reviewing the driver. Kind regards Uffe > > > Am 27.09.2014 um 09:11 schrieb Oleksij Rempel: >> This driver is based on documentation which was based on my RE-work and >> comparision with other MMC drivers. >> It works in legacy mode and can provide 20MB/s R/W spead for most modern >> SD cards, even if at least 40MB/s should be possible on this hardware. >> It was not possible provide description for all register. But some of them >> are important to make this hardware work in some unknown way. >> >> Biggest part of RE-work was done by emulating AU6601 in QEMU. >> >> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> >> --- >> drivers/mmc/host/Kconfig | 8 + >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/au6601.c | 1215 +++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 1224 insertions(+) >> create mode 100644 drivers/mmc/host/au6601.c >> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig >> index 779368b..630a4ee 100644 >> --- a/drivers/mmc/host/Kconfig >> +++ b/drivers/mmc/host/Kconfig >> @@ -315,6 +315,14 @@ config MMC_WBSD >> >> If unsure, say N. >> >> +config MMC_AU6601 >> + tristate "Alcor Micro AU6601" >> + help >> + This selects the Alcor Micro Multimedia card interface. >> + >> + If unsure, say N. >> + >> + >> config MMC_AU1X >> tristate "Alchemy AU1XX0 MMC Card Interface support" >> depends on MIPS_ALCHEMY >> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile >> index 61cbc24..b2aab60 100644 >> --- a/drivers/mmc/host/Makefile >> +++ b/drivers/mmc/host/Makefile >> @@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o >> obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o >> obj-$(CONFIG_MMC_WBSD) += wbsd.o >> obj-$(CONFIG_MMC_AU1X) += au1xmmc.o >> +obj-$(CONFIG_MMC_AU6601) += au6601.o >> obj-$(CONFIG_MMC_OMAP) += omap.o >> obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o >> obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o >> diff --git a/drivers/mmc/host/au6601.c b/drivers/mmc/host/au6601.c >> new file mode 100644 >> index 0000000..1b9b46d >> --- /dev/null >> +++ b/drivers/mmc/host/au6601.c >> @@ -0,0 +1,1215 @@ >> +/* >> + * Copyright (C) 2014 Oleksij Rempel. >> + * >> + * Authors: Oleksij Rempel <linux@rempel-privat.de> >> + * >> + * This software is licensed under the terms of the GNU General Public >> + * License version 2, as published by the Free Software Foundation, and >> + * may be copied, distributed, and modified under those terms. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> + >> +#include <linux/delay.h> >> +#include <linux/pci.h> >> +#include <linux/module.h> >> +#include <linux/io.h> >> +#include <linux/pm.h> >> +#include <linux/irq.h> >> +#include <linux/interrupt.h> >> + >> +#include <linux/mmc/host.h> >> +#include <linux/mmc/mmc.h> >> + >> +#define DRVNAME "au6601-pci" >> +#define PCI_ID_ALCOR_MICRO 0x1aea >> +#define PCI_ID_AU6601 0x6601 >> + >> +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) >> + >> +#define AU6601_MIN_CLOCK (150 * 1000) >> +#define AU6601_MAX_CLOCK MHZ_TO_HZ(208) >> +#define AU6601_MAX_SEGMENTS 512 >> +#define AU6601_MAX_BLOCK_LENGTH 512 >> +#define AU6601_MAX_DMA_BLOCKS 8 >> +#define AU6601_DMA_LOCAL_SEGMENTS 3 >> +#define AU6601_MAX_BLOCK_COUNT 65536 >> + >> +/* SDMA phy address. Higer then 0x0800.0000? */ >> +#define AU6601_REG_SDMA_ADDR 0x00 >> + #define AU6601_SDMA_MASK 0xfffff000 >> +/* ADMA block count? AU6621 only. */ >> +#define REG_05 0x05 >> +/* PIO */ >> +#define AU6601_REG_BUFFER 0x08 >> +/* ADMA ctrl? AU6621 only. */ >> +#define REG_0C 0x0c >> +/* ADMA phy address. AU6621 only. */ >> +#define REG_10 0x10 >> +/* CMD index */ >> +#define AU6601_REG_CMD_OPCODE 0x23 >> +/* CMD parametr */ >> +#define AU6601_REG_CMD_ARG 0x24 >> +/* CMD response 4x4 Bytes */ >> +#define AU6601_REG_CMD_RSP0 0x30 >> +#define AU6601_REG_CMD_RSP1 0x34 >> +#define AU6601_REG_CMD_RSP2 0x38 >> +#define AU6601_REG_CMD_RSP3 0x3C >> +/* LED ctrl? */ >> +#define REG_51 0x51 >> +/* ??? */ >> +#define REG_52 0x52 >> +/* LED related? Always toggled BIT0 */ >> +#define REG_61 0x61 >> +/* Same as REG_61? */ >> +#define REG_63 0x63 >> +/* ??? */ >> +#define REG_69 0x69 >> +/* Block size for SDMA or PIO */ >> +#define AU6601_REG_BLOCK_SIZE 0x6c >> +/* Some power related reg, used together with REG_7A */ >> +#define REG_70 0x70 >> +/* PLL ctrl */ >> +#define AU6601_REG_PLL_CTRL 0x72 >> +/* ??? */ >> +#define REG_74 0x74 >> +/* ??? */ >> +#define REG_75 0x75 >> +/* card slot state? */ >> +#define REG_76 0x76 >> +/* ??? */ >> +#define REG_77 0x77 >> +/* looks like soft reset? */ >> +#define AU6601_REG_SW_RESET 0x79 >> + #define AU6601_RESET_UNK BIT(7) /* unknown bit */ >> + #define AU6601_RESET_DATA BIT(3) >> + #define AU6601_RESET_CMD BIT(0) >> +/* see REG_70 */ >> +#define REG_7A 0x7a >> +/* ??? Padding? Timeing? */ >> +#define REG_7B 0x7b >> +/* ??? Padding? Timeing? */ >> +#define REG_7C 0x7c >> +/* ??? Padding? Timeing? */ >> +#define REG_7D 0x7d >> +/* read EEPROM? */ >> +#define REG_7F 0x7f >> + >> +#define AU6601_REG_CMD_CTRL 0x81 >> +#define AU6601_REG_BUS_CTRL 0x82 >> + #define AU6601_BUS_WIDTH_4BIT BIT(5) >> +#define REG_83 0x83 >> + >> +#define AU6601_REG_BUS_STATUS 0x84 >> + #define AU6601_BUS_STAT_CMD BIT(15) >> +/* BIT(4) - BIT(7) are permanently 1. >> + * May be reseved or not attached DAT4-DAT7 */ >> + #define AU6601_BUS_STAT_DAT3 BIT(3) >> + #define AU6601_BUS_STAT_DAT2 BIT(2) >> + #define AU6601_BUS_STAT_DAT1 BIT(1) >> + #define AU6601_BUS_STAT_DAT0 BIT(0) >> + #define AU6601_BUS_STAT_DAT_MASK 0xf >> +#define REG_85 0x85 >> +/* ??? */ >> +#define REG_86 0x86 >> +#define AU6601_REG_INT_STATUS 0x90 /* IRQ intmask */ >> +#define AU6601_REG_INT_ENABLE 0x94 >> +/* ??? */ >> +#define REG_A1 0xa1 >> +/* ??? */ >> +#define REG_A2 0xa2 >> +/* ??? */ >> +#define REG_A3 0xa3 >> +/* ??? */ >> +#define REG_B0 0xb0 >> +/* ??? */ >> +#define REG_B4 0xb4 >> + >> + /* AU6601_REG_INT_STATUS is identical or almost identical with sdhci.h */ >> + /* OK - are tested and confirmed bits */ >> + #define AU6601_INT_RESPONSE 0x00000001 /* ok */ >> + #define AU6601_INT_DATA_END 0x00000002 /* fifo, ok */ >> + #define AU6601_INT_BLK_GAP 0x00000004 >> + #define AU6601_INT_DMA_END 0x00000008 >> + #define AU6601_INT_SPACE_AVAIL 0x00000010 /* fifo, ok */ >> + #define AU6601_INT_DATA_AVAIL 0x00000020 /* fifo, ok */ >> + #define AU6601_INT_CARD_REMOVE 0x00000040 >> + #define AU6601_INT_CARD_INSERT 0x00000080 /* 0x40 and 0x80 flip */ >> + #define AU6601_INT_CARD_INT 0x00000100 >> + #define AU6601_INT_ERROR 0x00008000 /* ok */ >> + #define AU6601_INT_TIMEOUT 0x00010000 /* seems to be ok */ >> + #define AU6601_INT_CRC 0x00020000 /* seems to be ok */ >> + #define AU6601_INT_END_BIT 0x00040000 >> + #define AU6601_INT_INDEX 0x00080000 >> + #define AU6601_INT_DATA_TIMEOUT 0x00100000 >> + #define AU6601_INT_DATA_CRC 0x00200000 >> + #define AU6601_INT_DATA_END_BIT 0x00400000 >> + #define AU6601_INT_BUS_POWER 0x00800000 >> + #define AU6601_INT_ACMD12ERR 0x01000000 >> + #define AU6601_INT_ADMA_ERROR 0x02000000 >> + >> + #define AU6601_INT_NORMAL_MASK 0x00007FFF >> + #define AU6601_INT_ERROR_MASK 0xFFFF8000 >> + >> +/* magic 0xF0001 */ >> + #define AU6601_INT_CMD_MASK (AU6601_INT_RESPONSE | AU6601_INT_TIMEOUT | \ >> + AU6601_INT_CRC | AU6601_INT_END_BIT | AU6601_INT_INDEX) >> +/* magic 0x70003A */ >> + #define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ >> + AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL | \ >> + AU6601_INT_DATA_TIMEOUT | AU6601_INT_DATA_CRC | \ >> + AU6601_INT_DATA_END_BIT) >> + #define AU6601_INT_ALL_MASK ((uint32_t)-1) >> + >> +bool disable_dma = 0; >> + >> +struct au6601_host { >> + struct pci_dev *pdev; >> + struct device *dev; >> + void __iomem *iobase; >> + void __iomem *virt_base; >> + dma_addr_t phys_base; >> + >> + struct mmc_host *mmc; >> + struct mmc_request *mrq; >> + struct mmc_command *cmd; >> + struct mmc_data *data; >> + unsigned int data_early:1; /* Data finished before cmd */ >> + unsigned int dma_on:1; >> + unsigned int trigger_dma_dac:1; /* Trigger Data after Command. >> + * In some cases data ragister >> + * should be triggered after >> + * command was done */ >> + >> + struct mutex cmd_mutex; >> + >> + struct timer_list timer; >> + >> + struct sg_mapping_iter sg_miter; /* SG state for PIO */ >> + unsigned int blocks; /* remaining PIO blocks */ >> + unsigned int requested_blocks; /* count of requested */ >> + int sg_count; /* Mapped sg entries */ >> +}; >> + >> +static void au6601_send_cmd(struct au6601_host *host, >> + struct mmc_command *cmd); >> + >> +static void au6601_prepare_data(struct au6601_host *host, >> + struct mmc_command *cmd); >> +static void au6601_finish_data(struct au6601_host *host); >> +static void au6601_request_complete(struct au6601_host *host); >> + >> +static const struct pci_device_id pci_ids[] = { >> + { >> + .vendor = PCI_ID_ALCOR_MICRO, >> + .device = PCI_ID_AU6601, >> + .subvendor = PCI_ANY_ID, >> + .subdevice = PCI_ANY_ID, >> + }, >> + { /* end: all zeroes */ }, >> +}; >> +MODULE_DEVICE_TABLE(pci, pci_ids); >> + >> +static inline void au6601_rmw(void __iomem *reg, u32 clear, u32 set) >> +{ >> + u32 var; >> + >> + var = ioread32(reg); >> + var &= ~clear; >> + var |= set; >> + iowrite32(var, reg); >> +} >> + >> +static inline void au6601_mask_irqs(struct au6601_host *host) >> +{ >> + iowrite32(0, host->iobase + AU6601_REG_INT_ENABLE); >> +} >> + >> +static inline void au6601_unmask_irqs(struct au6601_host *host) >> +{ >> + iowrite32(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | >> + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | >> + AU6601_INT_CARD_INT | AU6601_INT_BUS_POWER, >> + host->iobase + AU6601_REG_INT_ENABLE); >> +} >> + >> +static void au6601_clear_set_reg86(struct au6601_host *host, u32 clear, u32 set) >> +{ >> + au6601_rmw(host->iobase + REG_86, clear, set); >> +} >> + >> +/* >> + * check if one of data line is pulled down >> + */ >> +static inline int au6601_card_busy(struct au6601_host *host) >> +{ >> + u8 status; >> + >> + status = (ioread8(host->iobase + AU6601_REG_BUS_STATUS) & >> + AU6601_BUS_STAT_DAT_MASK); >> + /* If all data lines are up, then card is not busy */ >> + if (status == (AU6601_BUS_STAT_DAT0 | AU6601_BUS_STAT_DAT1 | >> + AU6601_BUS_STAT_DAT2 | AU6601_BUS_STAT_DAT3)) >> + return 0; >> + >> + return 1; >> +} >> + >> +/* val = 0x1 abort command; 0x8 abort data? */ >> +static void au6601_reset(struct au6601_host *host, u8 val) >> +{ >> + int i; >> + >> + iowrite8(val | AU6601_RESET_UNK, host->iobase + AU6601_REG_SW_RESET); >> + for (i = 0; i < 100; i++) { >> + if (!(ioread8(host->iobase + AU6601_REG_SW_RESET) & val)) >> + return; >> + udelay(50); >> + } >> + dev_err(host->dev, "%s: timeout\n", __func__); >> +} >> + >> +/* >> + * - 0x8 only Vcc is on >> + * - 0x1 Vcc and other pins are on >> + * - 0x1 | 0x8 like 0x1, but DAT2 is off >> + */ >> +static void au6601_set_power(struct au6601_host *host, >> + unsigned int value, unsigned int set) >> +{ >> + u8 tmp1, tmp2; >> + >> + tmp1 = ioread8(host->iobase + REG_70); >> + tmp2 = ioread8(host->iobase + REG_7A); >> + if (set) { >> + iowrite8(tmp1 | value, host->iobase + REG_70); >> + iowrite8(tmp2 | value, host->iobase + REG_7A); >> + } else { >> + iowrite8(tmp2 & ~value, host->iobase + REG_7A); >> + iowrite8(tmp1 & ~value, host->iobase + REG_70); >> + } >> +} >> + >> +static void au6601_trigger_data_transfer(struct au6601_host *host, >> + unsigned int dma) >> +{ >> + struct mmc_data *data = host->data; >> + u8 ctrl = 0; >> + >> + if (data->flags & MMC_DATA_WRITE) >> + ctrl |= 0x80; >> + >> + if (dma) { >> + iowrite32(host->phys_base, host->iobase + AU6601_REG_SDMA_ADDR); >> + ctrl |= 0x40; >> + host->dma_on = 1; >> + >> + if (data->flags & MMC_DATA_WRITE) >> + goto done; >> + /* prepare first DMA buffer for write operation */ >> + if (host->blocks > AU6601_MAX_DMA_BLOCKS) >> + host->requested_blocks = AU6601_MAX_DMA_BLOCKS; >> + else >> + host->requested_blocks = host->blocks; >> + >> + } >> + >> +done: >> + iowrite32(data->blksz * host->requested_blocks, >> + host->iobase + AU6601_REG_BLOCK_SIZE); >> + iowrite8(ctrl | 0x1, host->iobase + REG_83); >> +} >> + >> +/*****************************************************************************\ >> + * * >> + * Core functions * >> + * * >> +\*****************************************************************************/ >> + >> +static void au6601_read_block(struct au6601_host *host) >> +{ >> + size_t blksize, len, chunk = 0; >> + void __iomem *virt_base = host->virt_base; >> + u8 *buf; >> + >> + dev_dbg(host->dev, "PIO reading\n"); >> + >> + blksize = host->data->blksz * host->requested_blocks; >> + >> + while (blksize) { >> + if (!sg_miter_next(&host->sg_miter)) >> + BUG(); >> + >> + len = min(host->sg_miter.length, blksize); >> + >> + blksize -= len; >> + host->sg_miter.consumed = len; >> + >> + buf = host->sg_miter.addr; >> + >> + if (host->dma_on) { >> + memcpy_fromio(buf, virt_base, len); >> + virt_base += len; >> + len = 0; >> + } else { >> + while (len) { >> + u32 scratch; >> + >> + if (chunk == 0) { >> + scratch = ioread32(host->iobase + >> + AU6601_REG_BUFFER); >> + chunk = 4; >> + } >> + >> + *buf = scratch & 0xFF; >> + >> + buf++; >> + scratch >>= 8; >> + chunk--; >> + len--; >> + } >> + } >> + } >> + >> + sg_miter_stop(&host->sg_miter); >> +} >> + >> +static void au6601_write_block(struct au6601_host *host) >> +{ >> + size_t blksize, len, chunk = 0; >> + void __iomem *virt_base = host->virt_base; >> + u32 scratch = 0; >> + u8 *buf; >> + >> + dev_dbg(host->dev, "PIO writing\n"); >> + >> + blksize = host->data->blksz * host->requested_blocks; >> + >> + while (blksize) { >> + if (!sg_miter_next(&host->sg_miter)) >> + BUG(); >> + >> + len = min(host->sg_miter.length, blksize); >> + >> + blksize -= len; >> + host->sg_miter.consumed = len; >> + >> + buf = host->sg_miter.addr; >> + >> + if (host->dma_on) { >> + memcpy_toio(virt_base, buf, len); >> + virt_base += len; >> + len = 0; >> + } else { >> + while (len) { >> + scratch |= (u32)*buf << (chunk * 8); >> + >> + buf++; >> + chunk++; >> + len--; >> + >> + if ((chunk == 4) || ((len == 0) >> + && (blksize == 0))) { >> + iowrite32(scratch, host->iobase + >> + AU6601_REG_BUFFER); >> + chunk = 0; >> + scratch = 0; >> + } >> + } >> + } >> + } >> + >> + sg_miter_stop(&host->sg_miter); >> +} >> + >> +static void au6601_transfer_data(struct au6601_host *host) >> +{ >> + if (host->blocks == 0) >> + return; >> + >> + if (host->data->flags & MMC_DATA_READ) >> + au6601_read_block(host); >> + else >> + au6601_write_block(host); >> + >> + host->blocks -= host->requested_blocks; >> + if (host->dma_on) { >> + host->dma_on = 0; >> + if (host->blocks || (!host->blocks && >> + (host->data->flags & MMC_DATA_WRITE))) >> + au6601_trigger_data_transfer(host, 1); >> + else >> + au6601_finish_data(host); >> + } >> + >> + dev_dbg(host->dev, "PIO transfer complete.\n"); >> +} >> + >> +static void au6601_finish_command(struct au6601_host *host) >> +{ >> + struct mmc_command *cmd = host->cmd; >> + >> + if (host->cmd->flags & MMC_RSP_PRESENT) { >> + cmd->resp[0] = ioread32be(host->iobase + AU6601_REG_CMD_RSP0); >> + if (host->cmd->flags & MMC_RSP_136) { >> + cmd->resp[1] = >> + ioread32be(host->iobase + AU6601_REG_CMD_RSP1); >> + cmd->resp[2] = >> + ioread32be(host->iobase + AU6601_REG_CMD_RSP2); >> + cmd->resp[3] = >> + ioread32be(host->iobase + AU6601_REG_CMD_RSP3); >> + } >> + >> + } >> + >> + host->cmd->error = 0; >> + >> + /* Finished CMD23, now send actual command. */ >> + if (host->cmd == host->mrq->sbc) { >> + host->cmd = NULL; >> + au6601_send_cmd(host, host->mrq->cmd); >> + } else { >> + /* Processed actual command. */ >> + if (!host->data) >> + au6601_request_complete(host); >> + else if (host->data_early) >> + au6601_finish_data(host); >> + else if (host->trigger_dma_dac) { >> + host->dma_on = 1; >> + au6601_transfer_data(host); >> + } >> + >> + host->cmd = NULL; >> + } >> +} >> + >> +static void au6601_finish_data(struct au6601_host *host) >> +{ >> + struct mmc_data *data; >> + >> + data = host->data; >> + host->data = NULL; >> + host->dma_on = 0; >> + host->trigger_dma_dac = 0; >> + >> + /* >> + * The specification states that the block count register must >> + * be updated, but it does not specify at what point in the >> + * data flow. That makes the register entirely useless to read >> + * back so we have to assume that nothing made it to the card >> + * in the event of an error. >> + */ >> + if (data->error) >> + data->bytes_xfered = 0; >> + else >> + data->bytes_xfered = data->blksz * data->blocks; >> + >> + /* >> + * Need to send CMD12 if - >> + * a) open-ended multiblock transfer (no CMD23) >> + * b) error in multiblock transfer >> + */ >> + if (data->stop && >> + (data->error || >> + !host->mrq->sbc)) { >> + >> + /* >> + * The controller needs a reset of internal state machines >> + * upon error conditions. >> + */ >> + if (data->error) { >> + au6601_reset(host, AU6601_RESET_CMD); >> + au6601_reset(host, AU6601_RESET_DATA); >> + } >> + au6601_send_cmd(host, data->stop); >> + } else >> + au6601_request_complete(host); >> +} >> + >> +static void au6601_prepare_sg_miter(struct au6601_host *host) >> +{ >> + unsigned int flags = SG_MITER_ATOMIC; >> + struct mmc_data *data = host->data; >> + >> + if (data->flags & MMC_DATA_READ) >> + flags |= SG_MITER_TO_SG; >> + else >> + flags |= SG_MITER_FROM_SG; >> + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); >> +} >> + >> +static void au6601_prepare_data(struct au6601_host *host, >> + struct mmc_command *cmd) >> +{ >> + unsigned int dma = 0; >> + struct mmc_data *data = cmd->data; >> + >> + if (!data) >> + return; >> + >> + /* Sanity checks */ >> + BUG_ON(data->blksz * data->blocks > 524288); >> + BUG_ON(data->blksz > host->mmc->max_blk_size); >> + BUG_ON(data->blocks > AU6601_MAX_BLOCK_COUNT); >> + >> + host->data = data; >> + host->data_early = 0; >> + host->data->bytes_xfered = 0; >> + host->requested_blocks = 1; >> + >> + au6601_prepare_sg_miter(host); >> + host->blocks = data->blocks; >> + >> + if (!disable_dma && >> + host->blocks > 1 && >> + data->blksz == host->mmc->max_blk_size) { >> + dma = 1; >> + >> + if (data->flags & MMC_DATA_WRITE) { >> + /* prepare first write buffer */ >> + /* Don't trigger data transfer now. >> + * DMA may start it too eraly */ >> + host->trigger_dma_dac = 1; >> + return; >> + } >> + } >> + >> + au6601_trigger_data_transfer(host, dma); >> +} >> + >> +static void au6601_send_cmd(struct au6601_host *host, >> + struct mmc_command *cmd) >> +{ >> + u8 ctrl; /*some mysterious flags and control */ >> + unsigned long timeout; >> + >> + timeout = jiffies; >> + if (!cmd->data && cmd->busy_timeout > 9000) >> + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; >> + else >> + timeout += 10 * HZ; >> + mod_timer(&host->timer, timeout); >> + >> + host->cmd = cmd; >> + au6601_prepare_data(host, cmd); >> + >> + iowrite8(cmd->opcode | 0x40, host->iobase + AU6601_REG_CMD_OPCODE); >> + iowrite32be(cmd->arg, host->iobase + AU6601_REG_CMD_ARG); >> + >> + switch (mmc_resp_type(cmd)) { >> + case MMC_RSP_NONE: >> + ctrl = 0; >> + break; >> + case MMC_RSP_R1: >> + ctrl = 0x40; >> + break; >> + case MMC_RSP_R1B: >> + ctrl = 0x40 | 0x10; >> + break; >> + case MMC_RSP_R2: >> + ctrl = 0xc0; >> + break; >> + case MMC_RSP_PRESENT | MMC_RSP_OPCODE: >> + case MMC_RSP_R3: >> + ctrl = 0x80; >> + break; >> + default: >> + dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n", >> + mmc_hostname(host->mmc), mmc_resp_type(cmd)); >> + break; >> + } >> + >> + iowrite8(ctrl | 0x20, host->iobase + AU6601_REG_CMD_CTRL); >> +} >> + >> +/*****************************************************************************\ >> + * * >> + * Interrupt handling * >> + * * >> +\*****************************************************************************/ >> + >> +static void au6601_cmd_irq(struct au6601_host *host, u32 intmask) >> +{ >> + if (!host->cmd) { >> + dev_err(host->dev, >> + "Got command interrupt 0x%08x even though no command operation was in progress.\n", >> + intmask); >> + return; >> + } >> + >> + if (intmask & AU6601_INT_TIMEOUT) >> + host->cmd->error = -ETIMEDOUT; >> + else if (intmask & (AU6601_INT_CRC | AU6601_INT_END_BIT | >> + AU6601_INT_INDEX)) >> + host->cmd->error = -EILSEQ; >> + >> + if (host->cmd->error) { >> + au6601_request_complete(host); >> + return; >> + } >> + >> + /* >> + * The host can send and interrupt when the busy state has >> + * ended, allowing us to wait without wasting CPU cycles. >> + * Unfortunately this is overloaded on the "data complete" >> + * interrupt, so we need to take some care when handling >> + * it. >> + * >> + * Note: The 1.0 specification is a bit ambiguous about this >> + * feature so there might be some problems with older >> + * controllers. >> + */ >> + if (host->cmd->flags & MMC_RSP_BUSY) { >> + if (host->cmd->data) >> + dev_warn(host->dev, >> + "Cannot wait for busy signal when also doing a data transfer"); >> + } >> + >> + if (intmask & AU6601_INT_RESPONSE) >> + au6601_finish_command(host); >> +} >> + >> +static void au6601_data_irq(struct au6601_host *host, u32 intmask) >> +{ >> + if (!host->data) { >> + /* FIXME: Ist is same for AU6601 >> + * The "data complete" interrupt is also used to >> + * indicate that a busy state has ended. See comment >> + * above in au6601_cmd_irq(). >> + */ >> + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { >> + if (intmask & AU6601_INT_DATA_END) { >> + au6601_finish_command(host); >> + return; >> + } >> + } >> + >> + dev_err(host->dev, >> + "Got data interrupt 0x%08x even though no data operation was in progress.\n", >> + (unsigned)intmask); >> + >> + if (intmask & AU6601_INT_ERROR_MASK) { >> + host->cmd->error = -ETIMEDOUT; >> + au6601_request_complete(host); >> + } >> + return; >> + } >> + >> + if (intmask & AU6601_INT_DATA_TIMEOUT) >> + host->data->error = -ETIMEDOUT; >> + else if (intmask & AU6601_INT_DATA_END_BIT) >> + host->data->error = -EILSEQ; >> + else if (intmask & AU6601_INT_DATA_CRC) >> + host->data->error = -EILSEQ; >> + >> + if (host->data->error) >> + au6601_finish_data(host); >> + else { >> + if (intmask & (AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL)) >> + au6601_transfer_data(host); >> + >> + if (intmask & AU6601_INT_DATA_END) { >> + if (host->cmd) { >> + /* >> + * Data managed to finish before the >> + * command completed. Make sure we do >> + * things in the proper order. >> + */ >> + host->data_early = 1; >> + } else if (host->blocks && !host->dma_on) { >> + /* >> + * Probably we do multi block operation. >> + * Prepare PIO for next block. >> + */ >> + au6601_trigger_data_transfer(host, 0); >> + } else if (host->blocks && host->dma_on) { >> + au6601_transfer_data(host); >> + } else { >> + if (host->dma_on) >> + au6601_transfer_data(host); >> + au6601_finish_data(host); >> + } >> + } >> + } >> +} >> + >> +static irqreturn_t au6601_irq(int irq, void *d) >> +{ >> + struct au6601_host *host = d; >> + irqreturn_t ret = IRQ_HANDLED; >> + u32 intmask; >> + >> + mutex_lock(&host->cmd_mutex); >> + >> + intmask = ioread32(host->iobase + AU6601_REG_INT_STATUS); >> + iowrite32(intmask, host->iobase + AU6601_REG_INT_STATUS); >> + >> + /* some thing bad */ >> + if (unlikely(!intmask || intmask == AU6601_INT_ALL_MASK)) { >> + ret = IRQ_NONE; >> + goto exit; >> + } >> + >> + if (intmask & AU6601_INT_CMD_MASK) { >> + dev_dbg(host->dev, "CMD IRQ %x\n", intmask); >> + >> + au6601_cmd_irq(host, intmask & AU6601_INT_CMD_MASK); >> + intmask &= ~AU6601_INT_CMD_MASK; >> + } >> + >> + if (intmask & AU6601_INT_DATA_MASK) { >> + dev_dbg(host->dev, "DATA IRQ %x\n", intmask); >> + au6601_data_irq(host, intmask & AU6601_INT_DATA_MASK); >> + intmask &= ~AU6601_INT_DATA_MASK; >> + } >> + >> + if (intmask & (AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE)) { >> + /* this check can be remove */ >> + if (intmask & AU6601_INT_CARD_REMOVE) >> + dev_dbg(host->dev, "card removed\n"); >> + else >> + dev_dbg(host->dev, "card inserted\n"); >> + >> + intmask &= ~(AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE); >> + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); >> + } >> + >> + if (intmask & 0x100) { >> + dev_warn(host->dev, >> + "0x100 (card INT?) got unknown IRQ with %x\n", >> + intmask); >> + intmask &= ~0x100; >> + } >> + >> + if (intmask & 0xFFFF7FFF) { >> + dev_warn(host->dev, "0xFFFF7FFF got unhandled IRQ with %x\n", >> + intmask); >> + } >> + >> +exit: >> + mutex_unlock(&host->cmd_mutex); >> + return ret; >> +} >> + >> +static void au6601_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq) >> +{ >> + struct au6601_host *host; >> + >> + host = mmc_priv(mmc); >> + mutex_lock(&host->cmd_mutex); >> + >> + host->mrq = mrq; >> + >> + /* check if card is present then send command and data */ >> + if (ioread8(host->iobase + REG_76) & 0x1) >> + au6601_send_cmd(host, mrq->cmd); >> + else { >> + mrq->cmd->error = -ENOMEDIUM; >> + au6601_request_complete(host); >> + } >> + >> + mutex_unlock(&host->cmd_mutex); >> +} >> + >> +static void au6601_set_clock(struct au6601_host *host, unsigned int clock) >> +{ >> + unsigned int div = 0, mult = 0, ctrl = 0x1; >> + >> + /* FIXME: mesuered and calculated values are different. >> + * the clock is unstable in some mult/div combinations. >> + */ >> + if (clock >= MHZ_TO_HZ(208)) { >> + mult = 0xb0; /* 30 * ? / 2 = ?MHz */ >> + div = 2; >> + } else if (clock >= MHZ_TO_HZ(194)) { >> + mult = 0x30; /* 30 * 14 / 2 = 210MHz */ >> + div = 2; >> + } else if (clock >= MHZ_TO_HZ(130)) { >> + mult = 0x30; /* 30 * 14 / 3 = 140MHz */ >> + div = 3; >> + } else if (clock >= MHZ_TO_HZ(100)) { >> + mult = 0x30; /* 30 * 14 / 4 = 105MHz */ >> + div = 4; >> + } else if (clock >= MHZ_TO_HZ(80)) { >> + mult = 0x30; /* 30 * 14 / 5 = 84MHz */ >> + div = 5; >> + } else if (clock >= MHZ_TO_HZ(60)) { >> + mult = 0x30; /* 30 * 14 / 7 = 60MHz */ >> + div = 7; >> + } else if (clock >= MHZ_TO_HZ(50)) { >> + mult = 0x10; /* 30 * 2 / 1 = 60MHz */ >> + div = 1; >> + } else if (clock >= MHZ_TO_HZ(40)) { >> + mult = 0x30; /* 30 * 14 / 10 = 42MHz */ >> + div = 10; >> + } else if (clock >= MHZ_TO_HZ(25)) { >> + mult = 0x10; /* 30 * 2 / 2 = 30MHz */ >> + div = 2; >> + } else if (clock >= MHZ_TO_HZ(20)) { >> + mult = 0x20; /* 30 * 4 / 7 = 17MHz */ >> + div = 7; >> + } else if (clock >= MHZ_TO_HZ(10)) { >> + mult = 0x10; /* 30 * 2 / 5 = 12MHz */ >> + div = 5; >> + } else if (clock >= MHZ_TO_HZ(5)) { >> + mult = 0x10; /* 30 * 2 / 10 = 6MHz */ >> + div = 10; >> + } else if (clock >= MHZ_TO_HZ(1)) { >> + mult = 0x0; /* 30 / 16 = 1,8 MHz */ >> + div = 16; >> + } else if (clock == 0) { >> + ctrl = 0; >> + } else { >> + mult = 0x0; /* reversed 150 * 200 = 30MHz */ >> + div = 200; /* 150 KHZ mesured */ >> + } >> + dev_dbg(host->dev, "set freq %d, %x, %x\n", clock, div, mult); >> + iowrite16((div - 1) << 8 | mult | ctrl, >> + host->iobase + AU6601_REG_PLL_CTRL); >> +} >> + >> +static void au6601_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) >> +{ >> + struct au6601_host *host; >> + >> + host = mmc_priv(mmc); >> + mutex_lock(&host->cmd_mutex); >> + >> + iowrite8(0, host->iobase + REG_85); >> + iowrite8(0x31, host->iobase + REG_7B); >> + iowrite8(0x33, host->iobase + REG_7C); >> + iowrite8(1, host->iobase + REG_75); >> + iowrite8(0, host->iobase + REG_85); >> + >> + if (ios->bus_width == MMC_BUS_WIDTH_1) { >> + iowrite8(0x0, >> + host->iobase + AU6601_REG_BUS_CTRL); >> + au6601_clear_set_reg86(host, 0xc0, 0); >> + } else if (ios->bus_width == MMC_BUS_WIDTH_4) { >> + iowrite8(AU6601_BUS_WIDTH_4BIT, >> + host->iobase + AU6601_REG_BUS_CTRL); >> + au6601_clear_set_reg86(host, 0, 0xc0); >> + } else >> + dev_err(host->dev, "Unknown BUS mode\n"); >> + >> + au6601_set_clock(host, ios->clock); >> + >> + switch (ios->power_mode) { >> + case MMC_POWER_OFF: >> + au6601_set_power(host, 0x1 | 0x8, 0); >> + break; >> + case MMC_POWER_UP: >> + au6601_set_power(host, 0x8, 1); >> + break; >> + case MMC_POWER_ON: >> + au6601_set_power(host, 0x1, 1); >> + au6601_set_power(host, 0x8, 0); >> + break; >> + default: >> + dev_err(host->dev, "Unknown power parametr\n"); >> + } >> + >> + iowrite8(0x80, host->iobase + REG_83); >> + iowrite8(0x7d, host->iobase + REG_69); >> + ioread8(host->iobase + REG_74); >> + mutex_unlock(&host->cmd_mutex); >> +} >> + >> +static int au6601_ops_card_busy(struct mmc_host *mmc) >> +{ >> + struct au6601_host *host = mmc_priv(mmc); >> + >> + return au6601_card_busy(host); >> +} >> + >> +static const struct mmc_host_ops au6601_sdc_ops = { >> + .request = au6601_sdc_request, >> + .set_ios = au6601_sdc_set_ios, >> + >> + .card_busy = au6601_ops_card_busy, >> +}; >> + >> +static void au6601_request_complete(struct au6601_host *host) >> +{ >> + struct mmc_request *mrq; >> + >> + /* >> + * If this tasklet gets rescheduled while running, it will >> + * be run again afterwards but without any active request. >> + */ >> + if (!host->mrq) >> + return; >> + >> + del_timer(&host->timer); >> + >> + mrq = host->mrq; >> + >> + /* >> + * The controller needs a reset of internal state machines >> + * upon error conditions. >> + */ >> + if ((mrq->cmd && mrq->cmd->error) || >> + (mrq->data && (mrq->data->error || >> + (mrq->data->stop && mrq->data->stop->error)))) { >> + >> + au6601_reset(host, AU6601_RESET_CMD); >> + au6601_reset(host, AU6601_RESET_DATA); >> + } >> + >> + host->mrq = NULL; >> + host->cmd = NULL; >> + host->data = NULL; >> + host->dma_on = 0; >> + host->trigger_dma_dac = 0; >> + >> + mmc_request_done(host->mmc, mrq); >> +} >> + >> +static void au6601_timeout_timer(unsigned long data) >> +{ >> + struct au6601_host *host; >> + >> + host = (struct au6601_host *)data; >> + >> + mutex_lock(&host->cmd_mutex); >> + >> + if (host->mrq) { >> + dev_err(host->dev, >> + "Timeout waiting for hardware interrupt.\n"); >> + >> + if (host->data) { >> + host->data->error = -ETIMEDOUT; >> + au6601_finish_data(host); >> + } else { >> + if (host->cmd) >> + host->cmd->error = -ETIMEDOUT; >> + else >> + host->mrq->cmd->error = -ETIMEDOUT; >> + >> + au6601_request_complete(host); >> + } >> + } >> + >> + mmiowb(); >> + mutex_unlock(&host->cmd_mutex); >> +} >> + >> + >> + >> +static void au6601_init_mmc(struct au6601_host *host) >> +{ >> + struct mmc_host *mmc = host->mmc; >> + >> + mmc->f_min = AU6601_MIN_CLOCK; >> + mmc->f_max = AU6601_MAX_CLOCK; >> + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; >> + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY; >> + mmc->ops = &au6601_sdc_ops; >> + >> + /* Hardware cannot do scatter lists? */ >> + mmc->max_segs = AU6601_MAX_SEGMENTS; >> + >> + mmc->max_blk_size = AU6601_MAX_BLOCK_LENGTH; >> + mmc->max_blk_count = AU6601_MAX_BLOCK_COUNT; >> + >> + mmc->max_seg_size = AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS; >> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >> +} >> + >> +static void au6601_hw_init(struct au6601_host *host) >> +{ >> + >> + iowrite8(0, host->iobase + REG_74); >> + >> + iowrite8(0, host->iobase + REG_76); >> + /* disable DlinkMode? disabled by default. */ >> + iowrite8(0x80, host->iobase + REG_76); >> + >> + au6601_reset(host, AU6601_RESET_CMD); >> + >> + iowrite8(0x0, host->iobase + REG_05); >> + iowrite8(0x1, host->iobase + REG_75); >> + >> + au6601_unmask_irqs(host); >> + >> + iowrite32(0x0, host->iobase + AU6601_REG_BUS_CTRL); >> + >> + au6601_reset(host, AU6601_RESET_DATA); >> + >> + iowrite8(0x0, host->iobase + REG_05); >> + iowrite8(0x0, host->iobase + REG_85); >> + iowrite8(0x8, host->iobase + REG_75); >> + iowrite32(0x3d00fa, host->iobase + REG_B4); >> + >> + au6601_set_power(host, 0x1, 0); >> + au6601_set_power(host, 0x8, 0); >> + >> + host->dma_on = 0; >> +} >> + >> +static int __init au6601_dma_alloc(struct au6601_host *host) >> +{ >> + int ret; >> + >> + ret = pci_set_dma_mask(host->pdev, AU6601_SDMA_MASK); >> + if (ret) { >> + dev_err(host->dev, "Failed to set DMA mask\n"); >> + return ret; >> + } >> + >> + host->virt_base = dmam_alloc_coherent(host->dev, >> + AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS * AU6601_DMA_LOCAL_SEGMENTS, >> + &host->phys_base, GFP_KERNEL); >> + >> + if (!host->virt_base) { >> + dev_err(host->dev, "Failed to alloc DMA\n"); >> + return -ENOMEM; >> + } >> + >> + return 0; >> +} >> + >> +static int __init au6601_pci_probe(struct pci_dev *pdev, >> + const struct pci_device_id *ent) >> +{ >> + struct mmc_host *mmc; >> + struct au6601_host *host; >> + int ret, bar = 0; >> + >> + dev_info(&pdev->dev, "AU6601 controller found [%04x:%04x] (rev %x)\n", >> + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); >> + >> + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { >> + dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); >> + return -ENODEV; >> + } >> + >> + >> + ret = pcim_enable_device(pdev); >> + if (ret) >> + return ret; >> + >> + /* FIXME: create managed version of mmc_alloc_host and use it */ >> + mmc = mmc_alloc_host(sizeof(struct au6601_host *), &pdev->dev); >> + if (!mmc) { >> + dev_err(&pdev->dev, "Can't allocate MMC\n"); >> + return -ENOMEM; >> + } >> + >> + host = mmc_priv(mmc); >> + host->mmc = mmc; >> + host->pdev = pdev; >> + host->dev = &pdev->dev; >> + >> + ret = pci_request_region(pdev, bar, DRVNAME); >> + if (ret) { >> + dev_err(&pdev->dev, "Cannot request region\n"); >> + return -ENOMEM; >> + } >> + >> + host->iobase = pcim_iomap(pdev, bar, 0); >> + if (!host->iobase) >> + return -ENOMEM; >> + >> + ret = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL, au6601_irq, >> + IRQF_ONESHOT, "au6601 host", >> + host); >> + >> + if (ret) { >> + dev_err(&pdev->dev, "Failed to get irq for data line\n"); >> + return -ENOMEM; >> + } >> + >> + ret = au6601_dma_alloc(host); >> + if (ret) >> + return ret; >> + >> + pci_set_master(pdev); >> + pci_set_drvdata(pdev, host); >> + >> + mutex_init(&host->cmd_mutex); >> + /* >> + * Init tasklets. >> + */ >> + setup_timer(&host->timer, au6601_timeout_timer, (unsigned long)host); >> + >> + au6601_init_mmc(host); >> + au6601_hw_init(host); >> + >> + mmc_add_host(mmc); >> + return 0; >> +} >> + >> +static void au6601_hw_uninit(struct au6601_host *host) >> +{ >> + iowrite8(0x0, host->iobase + REG_76); >> + au6601_mask_irqs(host); >> + >> + au6601_set_power(host, 0x1, 0); >> + >> + iowrite8(0x0, host->iobase + REG_85); >> + iowrite8(0x0, host->iobase + REG_B4); >> + >> + au6601_set_power(host, 0x8, 0); >> +} >> + >> +static void __exit au6601_pci_remove(struct pci_dev *pdev) >> +{ >> + struct au6601_host *host; >> + >> + host = pci_get_drvdata(pdev); >> + >> + au6601_hw_uninit(host); >> + >> + del_timer_sync(&host->timer); >> + >> + mmc_remove_host(host->mmc); >> + mmc_free_host(host->mmc); >> +} >> + >> +#ifdef CONFIG_PM_SLEEP >> +static int au6601_suspend(struct device *dev) >> +{ >> + struct pci_dev *pdev = to_pci_dev(dev); >> + struct au6601_host *host = pci_get_drvdata(pdev); >> + >> + au6601_hw_uninit(host); >> + return 0; >> +} >> + >> +static int au6601_resume(struct device *dev) >> +{ >> + >> + struct pci_dev *pdev = to_pci_dev(dev); >> + struct au6601_host *host = pci_get_drvdata(pdev); >> + >> + au6601_hw_init(host); >> + return 0; >> +} >> +#endif /* CONFIG_PM_SLEEP */ >> + >> +static SIMPLE_DEV_PM_OPS(au6601_pm_ops, au6601_suspend, au6601_resume); >> + >> +static struct pci_driver au6601_driver = { >> + .name = DRVNAME, >> + .id_table = pci_ids, >> + .probe = au6601_pci_probe, >> + .remove = au6601_pci_remove, >> + .driver = { >> + .pm = &au6601_pm_ops >> + }, >> +}; >> + >> +module_pci_driver(au6601_driver); >> + >> +module_param(disable_dma, bool, S_IRUGO); >> +MODULE_PARM_DESC(disable_dma, "Disable DMA"); >> + >> +MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); >> +MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface"); >> +MODULE_LICENSE("GPL"); >> > > > -- > Regards, > Oleksij > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Sep 27, 2014 at 12:41 PM, Oleksij Rempel <linux@rempel-privat.de> wrote: > > This driver is based on documentation which was based on my RE-work and > comparision with other MMC drivers. > It works in legacy mode and can provide 20MB/s R/W spead for most modern > SD cards, even if at least 40MB/s should be possible on this hardware. > It was not possible provide description for all register. But some of them > are important to make this hardware work in some unknown way. > > Biggest part of RE-work was done by emulating AU6601 in QEMU. > > Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> > --- > drivers/mmc/host/Kconfig | 8 + > drivers/mmc/host/Makefile | 1 + > drivers/mmc/host/au6601.c | 1215 +++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 1224 insertions(+) > create mode 100644 drivers/mmc/host/au6601.c > > --- /dev/null > +++ b/drivers/mmc/host/au6601.c > @@ -0,0 +1,1215 @@ > +/* > + * Copyright (C) 2014 Oleksij Rempel. > + * > + * Authors: Oleksij Rempel <linux@rempel-privat.de> > + * > + * This software is licensed under the terms of the GNU General Public > + * License version 2, as published by the Free Software Foundation, and > + * may be copied, distributed, and modified under those terms. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > + > +#include <linux/delay.h> > +#include <linux/pci.h> > +#include <linux/module.h> > +#include <linux/io.h> > +#include <linux/pm.h> > +#include <linux/irq.h> > +#include <linux/interrupt.h> > + > +#include <linux/mmc/host.h> > +#include <linux/mmc/mmc.h> > + > +#define DRVNAME "au6601-pci" > +#define PCI_ID_ALCOR_MICRO 0x1aea > +#define PCI_ID_AU6601 0x6601 > + > +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) > + > +#define AU6601_MIN_CLOCK (150 * 1000) > +#define AU6601_MAX_CLOCK MHZ_TO_HZ(208) > +#define AU6601_MAX_SEGMENTS 512 > +#define AU6601_MAX_BLOCK_LENGTH 512 > +#define AU6601_MAX_DMA_BLOCKS 8 > +#define AU6601_DMA_LOCAL_SEGMENTS 3 > +#define AU6601_MAX_BLOCK_COUNT 65536 > + > +/* SDMA phy address. Higer then 0x0800.0000? */ > +#define AU6601_REG_SDMA_ADDR 0x00 > + #define AU6601_SDMA_MASK 0xfffff000 > +/* ADMA block count? AU6621 only. */ > +#define REG_05 0x05 > +/* PIO */ > +#define AU6601_REG_BUFFER 0x08 > +/* ADMA ctrl? AU6621 only. */ > +#define REG_0C 0x0c > +/* ADMA phy address. AU6621 only. */ > +#define REG_10 0x10 > +/* CMD index */ > +#define AU6601_REG_CMD_OPCODE 0x23 > +/* CMD parametr */ > +#define AU6601_REG_CMD_ARG 0x24 > +/* CMD response 4x4 Bytes */ > +#define AU6601_REG_CMD_RSP0 0x30 > +#define AU6601_REG_CMD_RSP1 0x34 > +#define AU6601_REG_CMD_RSP2 0x38 > +#define AU6601_REG_CMD_RSP3 0x3C > +/* LED ctrl? */ > +#define REG_51 0x51 > +/* ??? */ > +#define REG_52 0x52 > +/* LED related? Always toggled BIT0 */ > +#define REG_61 0x61 > +/* Same as REG_61? */ > +#define REG_63 0x63 > +/* ??? */ > +#define REG_69 0x69 > +/* Block size for SDMA or PIO */ > +#define AU6601_REG_BLOCK_SIZE 0x6c > +/* Some power related reg, used together with REG_7A */ > +#define REG_70 0x70 > +/* PLL ctrl */ > +#define AU6601_REG_PLL_CTRL 0x72 > +/* ??? */ > +#define REG_74 0x74 > +/* ??? */ > +#define REG_75 0x75 > +/* card slot state? */ > +#define REG_76 0x76 > +/* ??? */ > +#define REG_77 0x77 > +/* looks like soft reset? */ > +#define AU6601_REG_SW_RESET 0x79 > + #define AU6601_RESET_UNK BIT(7) /* unknown bit */ > + #define AU6601_RESET_DATA BIT(3) > + #define AU6601_RESET_CMD BIT(0) > +/* see REG_70 */ > +#define REG_7A 0x7a > +/* ??? Padding? Timeing? */ > +#define REG_7B 0x7b > +/* ??? Padding? Timeing? */ > +#define REG_7C 0x7c > +/* ??? Padding? Timeing? */ > +#define REG_7D 0x7d > +/* read EEPROM? */ > +#define REG_7F 0x7f > + > +#define AU6601_REG_CMD_CTRL 0x81 > +#define AU6601_REG_BUS_CTRL 0x82 > + #define AU6601_BUS_WIDTH_4BIT BIT(5) > +#define REG_83 0x83 > + > +#define AU6601_REG_BUS_STATUS 0x84 > + #define AU6601_BUS_STAT_CMD BIT(15) > +/* BIT(4) - BIT(7) are permanently 1. > + * May be reseved or not attached DAT4-DAT7 */ > + #define AU6601_BUS_STAT_DAT3 BIT(3) > + #define AU6601_BUS_STAT_DAT2 BIT(2) > + #define AU6601_BUS_STAT_DAT1 BIT(1) > + #define AU6601_BUS_STAT_DAT0 BIT(0) > + #define AU6601_BUS_STAT_DAT_MASK 0xf > +#define REG_85 0x85 > +/* ??? */ > +#define REG_86 0x86 > +#define AU6601_REG_INT_STATUS 0x90 /* IRQ intmask */ > +#define AU6601_REG_INT_ENABLE 0x94 > +/* ??? */ > +#define REG_A1 0xa1 > +/* ??? */ > +#define REG_A2 0xa2 > +/* ??? */ > +#define REG_A3 0xa3 > +/* ??? */ > +#define REG_B0 0xb0 > +/* ??? */ > +#define REG_B4 0xb4 > + > + /* AU6601_REG_INT_STATUS is identical or almost identical with sdhci.h */ > + /* OK - are tested and confirmed bits */ > + #define AU6601_INT_RESPONSE 0x00000001 /* ok */ > + #define AU6601_INT_DATA_END 0x00000002 /* fifo, ok */ > + #define AU6601_INT_BLK_GAP 0x00000004 > + #define AU6601_INT_DMA_END 0x00000008 > + #define AU6601_INT_SPACE_AVAIL 0x00000010 /* fifo, ok */ > + #define AU6601_INT_DATA_AVAIL 0x00000020 /* fifo, ok */ > + #define AU6601_INT_CARD_REMOVE 0x00000040 > + #define AU6601_INT_CARD_INSERT 0x00000080 /* 0x40 and 0x80 flip */ > + #define AU6601_INT_CARD_INT 0x00000100 > + #define AU6601_INT_ERROR 0x00008000 /* ok */ > + #define AU6601_INT_TIMEOUT 0x00010000 /* seems to be ok */ > + #define AU6601_INT_CRC 0x00020000 /* seems to be ok */ > + #define AU6601_INT_END_BIT 0x00040000 > + #define AU6601_INT_INDEX 0x00080000 > + #define AU6601_INT_DATA_TIMEOUT 0x00100000 > + #define AU6601_INT_DATA_CRC 0x00200000 > + #define AU6601_INT_DATA_END_BIT 0x00400000 > + #define AU6601_INT_BUS_POWER 0x00800000 > + #define AU6601_INT_ACMD12ERR 0x01000000 > + #define AU6601_INT_ADMA_ERROR 0x02000000 > + > + #define AU6601_INT_NORMAL_MASK 0x00007FFF > + #define AU6601_INT_ERROR_MASK 0xFFFF8000 > + > +/* magic 0xF0001 */ > + #define AU6601_INT_CMD_MASK (AU6601_INT_RESPONSE | AU6601_INT_TIMEOUT | \ > + AU6601_INT_CRC | AU6601_INT_END_BIT | AU6601_INT_INDEX) > +/* magic 0x70003A */ > + #define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ > + AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL | \ > + AU6601_INT_DATA_TIMEOUT | AU6601_INT_DATA_CRC | \ > + AU6601_INT_DATA_END_BIT) > + #define AU6601_INT_ALL_MASK ((uint32_t)-1) > + > +bool disable_dma = 0; > + > +struct au6601_host { > + struct pci_dev *pdev; > + struct device *dev; > + void __iomem *iobase; > + void __iomem *virt_base; > + dma_addr_t phys_base; > + > + struct mmc_host *mmc; > + struct mmc_request *mrq; > + struct mmc_command *cmd; > + struct mmc_data *data; > + unsigned int data_early:1; /* Data finished before cmd */ > + unsigned int dma_on:1; > + unsigned int trigger_dma_dac:1; /* Trigger Data after Command. > + * In some cases data ragister > + * should be triggered after > + * command was done */ > + > + struct mutex cmd_mutex; > + > + struct timer_list timer; > + > + struct sg_mapping_iter sg_miter; /* SG state for PIO */ > + unsigned int blocks; /* remaining PIO blocks */ > + unsigned int requested_blocks; /* count of requested */ > + int sg_count; /* Mapped sg entries */ > +}; > + > +static void au6601_send_cmd(struct au6601_host *host, > + struct mmc_command *cmd); > + > +static void au6601_prepare_data(struct au6601_host *host, > + struct mmc_command *cmd); > +static void au6601_finish_data(struct au6601_host *host); > +static void au6601_request_complete(struct au6601_host *host); > + > +static const struct pci_device_id pci_ids[] = { > + { > + .vendor = PCI_ID_ALCOR_MICRO, > + .device = PCI_ID_AU6601, > + .subvendor = PCI_ANY_ID, > + .subdevice = PCI_ANY_ID, > + }, > + { /* end: all zeroes */ }, > +}; > +MODULE_DEVICE_TABLE(pci, pci_ids); > + > +static inline void au6601_rmw(void __iomem *reg, u32 clear, u32 set) > +{ > + u32 var; > + > + var = ioread32(reg); > + var &= ~clear; > + var |= set; > + iowrite32(var, reg); > +} > + > +static inline void au6601_mask_irqs(struct au6601_host *host) > +{ > + iowrite32(0, host->iobase + AU6601_REG_INT_ENABLE); > +} > + > +static inline void au6601_unmask_irqs(struct au6601_host *host) > +{ > + iowrite32(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | > + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | > + AU6601_INT_CARD_INT | AU6601_INT_BUS_POWER, > + host->iobase + AU6601_REG_INT_ENABLE); > +} > + > +static void au6601_clear_set_reg86(struct au6601_host *host, u32 clear, u32 set) > +{ > + au6601_rmw(host->iobase + REG_86, clear, set); > +} > + > +/* > + * check if one of data line is pulled down > + */ > +static inline int au6601_card_busy(struct au6601_host *host) > +{ > + u8 status; > + > + status = (ioread8(host->iobase + AU6601_REG_BUS_STATUS) & > + AU6601_BUS_STAT_DAT_MASK); > + /* If all data lines are up, then card is not busy */ > + if (status == (AU6601_BUS_STAT_DAT0 | AU6601_BUS_STAT_DAT1 | > + AU6601_BUS_STAT_DAT2 | AU6601_BUS_STAT_DAT3)) If all lines have to be up, shouldn't it be "&" instead of "|" ? > + return 0; > + > + return 1; > +} -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 17.10.2014 um 14:37 schrieb Venkatraman S: > On Sat, Sep 27, 2014 at 12:41 PM, Oleksij Rempel <linux@rempel-privat.de> wrote: >> >> This driver is based on documentation which was based on my RE-work and >> comparision with other MMC drivers. >> It works in legacy mode and can provide 20MB/s R/W spead for most modern >> SD cards, even if at least 40MB/s should be possible on this hardware. >> It was not possible provide description for all register. But some of them >> are important to make this hardware work in some unknown way. >> >> Biggest part of RE-work was done by emulating AU6601 in QEMU. >> >> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> >> --- >> drivers/mmc/host/Kconfig | 8 + >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/au6601.c | 1215 +++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 1224 insertions(+) >> create mode 100644 drivers/mmc/host/au6601.c >> >> --- /dev/null >> +++ b/drivers/mmc/host/au6601.c >> @@ -0,0 +1,1215 @@ >> +/* >> + * Copyright (C) 2014 Oleksij Rempel. >> + * >> + * Authors: Oleksij Rempel <linux@rempel-privat.de> >> + * >> + * This software is licensed under the terms of the GNU General Public >> + * License version 2, as published by the Free Software Foundation, and >> + * may be copied, distributed, and modified under those terms. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + */ >> + >> + >> +#include <linux/delay.h> >> +#include <linux/pci.h> >> +#include <linux/module.h> >> +#include <linux/io.h> >> +#include <linux/pm.h> >> +#include <linux/irq.h> >> +#include <linux/interrupt.h> >> + >> +#include <linux/mmc/host.h> >> +#include <linux/mmc/mmc.h> >> + >> +#define DRVNAME "au6601-pci" >> +#define PCI_ID_ALCOR_MICRO 0x1aea >> +#define PCI_ID_AU6601 0x6601 >> + >> +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) >> + >> +#define AU6601_MIN_CLOCK (150 * 1000) >> +#define AU6601_MAX_CLOCK MHZ_TO_HZ(208) >> +#define AU6601_MAX_SEGMENTS 512 >> +#define AU6601_MAX_BLOCK_LENGTH 512 >> +#define AU6601_MAX_DMA_BLOCKS 8 >> +#define AU6601_DMA_LOCAL_SEGMENTS 3 >> +#define AU6601_MAX_BLOCK_COUNT 65536 >> + >> +/* SDMA phy address. Higer then 0x0800.0000? */ >> +#define AU6601_REG_SDMA_ADDR 0x00 >> + #define AU6601_SDMA_MASK 0xfffff000 >> +/* ADMA block count? AU6621 only. */ >> +#define REG_05 0x05 >> +/* PIO */ >> +#define AU6601_REG_BUFFER 0x08 >> +/* ADMA ctrl? AU6621 only. */ >> +#define REG_0C 0x0c >> +/* ADMA phy address. AU6621 only. */ >> +#define REG_10 0x10 >> +/* CMD index */ >> +#define AU6601_REG_CMD_OPCODE 0x23 >> +/* CMD parametr */ >> +#define AU6601_REG_CMD_ARG 0x24 >> +/* CMD response 4x4 Bytes */ >> +#define AU6601_REG_CMD_RSP0 0x30 >> +#define AU6601_REG_CMD_RSP1 0x34 >> +#define AU6601_REG_CMD_RSP2 0x38 >> +#define AU6601_REG_CMD_RSP3 0x3C >> +/* LED ctrl? */ >> +#define REG_51 0x51 >> +/* ??? */ >> +#define REG_52 0x52 >> +/* LED related? Always toggled BIT0 */ >> +#define REG_61 0x61 >> +/* Same as REG_61? */ >> +#define REG_63 0x63 >> +/* ??? */ >> +#define REG_69 0x69 >> +/* Block size for SDMA or PIO */ >> +#define AU6601_REG_BLOCK_SIZE 0x6c >> +/* Some power related reg, used together with REG_7A */ >> +#define REG_70 0x70 >> +/* PLL ctrl */ >> +#define AU6601_REG_PLL_CTRL 0x72 >> +/* ??? */ >> +#define REG_74 0x74 >> +/* ??? */ >> +#define REG_75 0x75 >> +/* card slot state? */ >> +#define REG_76 0x76 >> +/* ??? */ >> +#define REG_77 0x77 >> +/* looks like soft reset? */ >> +#define AU6601_REG_SW_RESET 0x79 >> + #define AU6601_RESET_UNK BIT(7) /* unknown bit */ >> + #define AU6601_RESET_DATA BIT(3) >> + #define AU6601_RESET_CMD BIT(0) >> +/* see REG_70 */ >> +#define REG_7A 0x7a >> +/* ??? Padding? Timeing? */ >> +#define REG_7B 0x7b >> +/* ??? Padding? Timeing? */ >> +#define REG_7C 0x7c >> +/* ??? Padding? Timeing? */ >> +#define REG_7D 0x7d >> +/* read EEPROM? */ >> +#define REG_7F 0x7f >> + >> +#define AU6601_REG_CMD_CTRL 0x81 >> +#define AU6601_REG_BUS_CTRL 0x82 >> + #define AU6601_BUS_WIDTH_4BIT BIT(5) >> +#define REG_83 0x83 >> + >> +#define AU6601_REG_BUS_STATUS 0x84 >> + #define AU6601_BUS_STAT_CMD BIT(15) >> +/* BIT(4) - BIT(7) are permanently 1. >> + * May be reseved or not attached DAT4-DAT7 */ >> + #define AU6601_BUS_STAT_DAT3 BIT(3) >> + #define AU6601_BUS_STAT_DAT2 BIT(2) >> + #define AU6601_BUS_STAT_DAT1 BIT(1) >> + #define AU6601_BUS_STAT_DAT0 BIT(0) >> + #define AU6601_BUS_STAT_DAT_MASK 0xf >> +#define REG_85 0x85 >> +/* ??? */ >> +#define REG_86 0x86 >> +#define AU6601_REG_INT_STATUS 0x90 /* IRQ intmask */ >> +#define AU6601_REG_INT_ENABLE 0x94 >> +/* ??? */ >> +#define REG_A1 0xa1 >> +/* ??? */ >> +#define REG_A2 0xa2 >> +/* ??? */ >> +#define REG_A3 0xa3 >> +/* ??? */ >> +#define REG_B0 0xb0 >> +/* ??? */ >> +#define REG_B4 0xb4 >> + >> + /* AU6601_REG_INT_STATUS is identical or almost identical with sdhci.h */ >> + /* OK - are tested and confirmed bits */ >> + #define AU6601_INT_RESPONSE 0x00000001 /* ok */ >> + #define AU6601_INT_DATA_END 0x00000002 /* fifo, ok */ >> + #define AU6601_INT_BLK_GAP 0x00000004 >> + #define AU6601_INT_DMA_END 0x00000008 >> + #define AU6601_INT_SPACE_AVAIL 0x00000010 /* fifo, ok */ >> + #define AU6601_INT_DATA_AVAIL 0x00000020 /* fifo, ok */ >> + #define AU6601_INT_CARD_REMOVE 0x00000040 >> + #define AU6601_INT_CARD_INSERT 0x00000080 /* 0x40 and 0x80 flip */ >> + #define AU6601_INT_CARD_INT 0x00000100 >> + #define AU6601_INT_ERROR 0x00008000 /* ok */ >> + #define AU6601_INT_TIMEOUT 0x00010000 /* seems to be ok */ >> + #define AU6601_INT_CRC 0x00020000 /* seems to be ok */ >> + #define AU6601_INT_END_BIT 0x00040000 >> + #define AU6601_INT_INDEX 0x00080000 >> + #define AU6601_INT_DATA_TIMEOUT 0x00100000 >> + #define AU6601_INT_DATA_CRC 0x00200000 >> + #define AU6601_INT_DATA_END_BIT 0x00400000 >> + #define AU6601_INT_BUS_POWER 0x00800000 >> + #define AU6601_INT_ACMD12ERR 0x01000000 >> + #define AU6601_INT_ADMA_ERROR 0x02000000 >> + >> + #define AU6601_INT_NORMAL_MASK 0x00007FFF >> + #define AU6601_INT_ERROR_MASK 0xFFFF8000 >> + >> +/* magic 0xF0001 */ >> + #define AU6601_INT_CMD_MASK (AU6601_INT_RESPONSE | AU6601_INT_TIMEOUT | \ >> + AU6601_INT_CRC | AU6601_INT_END_BIT | AU6601_INT_INDEX) >> +/* magic 0x70003A */ >> + #define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ >> + AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL | \ >> + AU6601_INT_DATA_TIMEOUT | AU6601_INT_DATA_CRC | \ >> + AU6601_INT_DATA_END_BIT) >> + #define AU6601_INT_ALL_MASK ((uint32_t)-1) >> + >> +bool disable_dma = 0; >> + >> +struct au6601_host { >> + struct pci_dev *pdev; >> + struct device *dev; >> + void __iomem *iobase; >> + void __iomem *virt_base; >> + dma_addr_t phys_base; >> + >> + struct mmc_host *mmc; >> + struct mmc_request *mrq; >> + struct mmc_command *cmd; >> + struct mmc_data *data; >> + unsigned int data_early:1; /* Data finished before cmd */ >> + unsigned int dma_on:1; >> + unsigned int trigger_dma_dac:1; /* Trigger Data after Command. >> + * In some cases data ragister >> + * should be triggered after >> + * command was done */ >> + >> + struct mutex cmd_mutex; >> + >> + struct timer_list timer; >> + >> + struct sg_mapping_iter sg_miter; /* SG state for PIO */ >> + unsigned int blocks; /* remaining PIO blocks */ >> + unsigned int requested_blocks; /* count of requested */ >> + int sg_count; /* Mapped sg entries */ >> +}; >> + >> +static void au6601_send_cmd(struct au6601_host *host, >> + struct mmc_command *cmd); >> + >> +static void au6601_prepare_data(struct au6601_host *host, >> + struct mmc_command *cmd); >> +static void au6601_finish_data(struct au6601_host *host); >> +static void au6601_request_complete(struct au6601_host *host); >> + >> +static const struct pci_device_id pci_ids[] = { >> + { >> + .vendor = PCI_ID_ALCOR_MICRO, >> + .device = PCI_ID_AU6601, >> + .subvendor = PCI_ANY_ID, >> + .subdevice = PCI_ANY_ID, >> + }, >> + { /* end: all zeroes */ }, >> +}; >> +MODULE_DEVICE_TABLE(pci, pci_ids); >> + >> +static inline void au6601_rmw(void __iomem *reg, u32 clear, u32 set) >> +{ >> + u32 var; >> + >> + var = ioread32(reg); >> + var &= ~clear; >> + var |= set; >> + iowrite32(var, reg); >> +} >> + >> +static inline void au6601_mask_irqs(struct au6601_host *host) >> +{ >> + iowrite32(0, host->iobase + AU6601_REG_INT_ENABLE); >> +} >> + >> +static inline void au6601_unmask_irqs(struct au6601_host *host) >> +{ >> + iowrite32(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | >> + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | >> + AU6601_INT_CARD_INT | AU6601_INT_BUS_POWER, >> + host->iobase + AU6601_REG_INT_ENABLE); >> +} >> + >> +static void au6601_clear_set_reg86(struct au6601_host *host, u32 clear, u32 set) >> +{ >> + au6601_rmw(host->iobase + REG_86, clear, set); >> +} >> + >> +/* >> + * check if one of data line is pulled down >> + */ >> +static inline int au6601_card_busy(struct au6601_host *host) >> +{ >> + u8 status; >> + >> + status = (ioread8(host->iobase + AU6601_REG_BUS_STATUS) & >> + AU6601_BUS_STAT_DAT_MASK); >> + /* If all data lines are up, then card is not busy */ >> + if (status == (AU6601_BUS_STAT_DAT0 | AU6601_BUS_STAT_DAT1 | >> + AU6601_BUS_STAT_DAT2 | AU6601_BUS_STAT_DAT3)) > > If all lines have to be up, shouldn't it be "&" instead of "|" ? No :) 01 & 10 = 00 01 | 1O = 11 in case of & status will be compared against 0. > >> + return 0; >> + >> + return 1; >> +}
Am 18.10.2014 um 08:26 schrieb Oleksij Rempel: > Am 17.10.2014 um 14:37 schrieb Venkatraman S: >> On Sat, Sep 27, 2014 at 12:41 PM, Oleksij Rempel <linux@rempel-privat.de> wrote: >>> >>> This driver is based on documentation which was based on my RE-work and >>> comparision with other MMC drivers. >>> It works in legacy mode and can provide 20MB/s R/W spead for most modern >>> SD cards, even if at least 40MB/s should be possible on this hardware. >>> It was not possible provide description for all register. But some of them >>> are important to make this hardware work in some unknown way. >>> >>> Biggest part of RE-work was done by emulating AU6601 in QEMU. >>> >>> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Any updates here?
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 779368b..630a4ee 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -315,6 +315,14 @@ config MMC_WBSD If unsure, say N. +config MMC_AU6601 + tristate "Alcor Micro AU6601" + help + This selects the Alcor Micro Multimedia card interface. + + If unsure, say N. + + config MMC_AU1X tristate "Alchemy AU1XX0 MMC Card Interface support" depends on MIPS_ALCHEMY diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 61cbc24..b2aab60 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o +obj-$(CONFIG_MMC_AU6601) += au6601.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o diff --git a/drivers/mmc/host/au6601.c b/drivers/mmc/host/au6601.c new file mode 100644 index 0000000..1b9b46d --- /dev/null +++ b/drivers/mmc/host/au6601.c @@ -0,0 +1,1215 @@ +/* + * Copyright (C) 2014 Oleksij Rempel. + * + * Authors: Oleksij Rempel <linux@rempel-privat.de> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/pm.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> + +#define DRVNAME "au6601-pci" +#define PCI_ID_ALCOR_MICRO 0x1aea +#define PCI_ID_AU6601 0x6601 + +#define MHZ_TO_HZ(freq) ((freq) * 1000 * 1000) + +#define AU6601_MIN_CLOCK (150 * 1000) +#define AU6601_MAX_CLOCK MHZ_TO_HZ(208) +#define AU6601_MAX_SEGMENTS 512 +#define AU6601_MAX_BLOCK_LENGTH 512 +#define AU6601_MAX_DMA_BLOCKS 8 +#define AU6601_DMA_LOCAL_SEGMENTS 3 +#define AU6601_MAX_BLOCK_COUNT 65536 + +/* SDMA phy address. Higer then 0x0800.0000? */ +#define AU6601_REG_SDMA_ADDR 0x00 + #define AU6601_SDMA_MASK 0xfffff000 +/* ADMA block count? AU6621 only. */ +#define REG_05 0x05 +/* PIO */ +#define AU6601_REG_BUFFER 0x08 +/* ADMA ctrl? AU6621 only. */ +#define REG_0C 0x0c +/* ADMA phy address. AU6621 only. */ +#define REG_10 0x10 +/* CMD index */ +#define AU6601_REG_CMD_OPCODE 0x23 +/* CMD parametr */ +#define AU6601_REG_CMD_ARG 0x24 +/* CMD response 4x4 Bytes */ +#define AU6601_REG_CMD_RSP0 0x30 +#define AU6601_REG_CMD_RSP1 0x34 +#define AU6601_REG_CMD_RSP2 0x38 +#define AU6601_REG_CMD_RSP3 0x3C +/* LED ctrl? */ +#define REG_51 0x51 +/* ??? */ +#define REG_52 0x52 +/* LED related? Always toggled BIT0 */ +#define REG_61 0x61 +/* Same as REG_61? */ +#define REG_63 0x63 +/* ??? */ +#define REG_69 0x69 +/* Block size for SDMA or PIO */ +#define AU6601_REG_BLOCK_SIZE 0x6c +/* Some power related reg, used together with REG_7A */ +#define REG_70 0x70 +/* PLL ctrl */ +#define AU6601_REG_PLL_CTRL 0x72 +/* ??? */ +#define REG_74 0x74 +/* ??? */ +#define REG_75 0x75 +/* card slot state? */ +#define REG_76 0x76 +/* ??? */ +#define REG_77 0x77 +/* looks like soft reset? */ +#define AU6601_REG_SW_RESET 0x79 + #define AU6601_RESET_UNK BIT(7) /* unknown bit */ + #define AU6601_RESET_DATA BIT(3) + #define AU6601_RESET_CMD BIT(0) +/* see REG_70 */ +#define REG_7A 0x7a +/* ??? Padding? Timeing? */ +#define REG_7B 0x7b +/* ??? Padding? Timeing? */ +#define REG_7C 0x7c +/* ??? Padding? Timeing? */ +#define REG_7D 0x7d +/* read EEPROM? */ +#define REG_7F 0x7f + +#define AU6601_REG_CMD_CTRL 0x81 +#define AU6601_REG_BUS_CTRL 0x82 + #define AU6601_BUS_WIDTH_4BIT BIT(5) +#define REG_83 0x83 + +#define AU6601_REG_BUS_STATUS 0x84 + #define AU6601_BUS_STAT_CMD BIT(15) +/* BIT(4) - BIT(7) are permanently 1. + * May be reseved or not attached DAT4-DAT7 */ + #define AU6601_BUS_STAT_DAT3 BIT(3) + #define AU6601_BUS_STAT_DAT2 BIT(2) + #define AU6601_BUS_STAT_DAT1 BIT(1) + #define AU6601_BUS_STAT_DAT0 BIT(0) + #define AU6601_BUS_STAT_DAT_MASK 0xf +#define REG_85 0x85 +/* ??? */ +#define REG_86 0x86 +#define AU6601_REG_INT_STATUS 0x90 /* IRQ intmask */ +#define AU6601_REG_INT_ENABLE 0x94 +/* ??? */ +#define REG_A1 0xa1 +/* ??? */ +#define REG_A2 0xa2 +/* ??? */ +#define REG_A3 0xa3 +/* ??? */ +#define REG_B0 0xb0 +/* ??? */ +#define REG_B4 0xb4 + + /* AU6601_REG_INT_STATUS is identical or almost identical with sdhci.h */ + /* OK - are tested and confirmed bits */ + #define AU6601_INT_RESPONSE 0x00000001 /* ok */ + #define AU6601_INT_DATA_END 0x00000002 /* fifo, ok */ + #define AU6601_INT_BLK_GAP 0x00000004 + #define AU6601_INT_DMA_END 0x00000008 + #define AU6601_INT_SPACE_AVAIL 0x00000010 /* fifo, ok */ + #define AU6601_INT_DATA_AVAIL 0x00000020 /* fifo, ok */ + #define AU6601_INT_CARD_REMOVE 0x00000040 + #define AU6601_INT_CARD_INSERT 0x00000080 /* 0x40 and 0x80 flip */ + #define AU6601_INT_CARD_INT 0x00000100 + #define AU6601_INT_ERROR 0x00008000 /* ok */ + #define AU6601_INT_TIMEOUT 0x00010000 /* seems to be ok */ + #define AU6601_INT_CRC 0x00020000 /* seems to be ok */ + #define AU6601_INT_END_BIT 0x00040000 + #define AU6601_INT_INDEX 0x00080000 + #define AU6601_INT_DATA_TIMEOUT 0x00100000 + #define AU6601_INT_DATA_CRC 0x00200000 + #define AU6601_INT_DATA_END_BIT 0x00400000 + #define AU6601_INT_BUS_POWER 0x00800000 + #define AU6601_INT_ACMD12ERR 0x01000000 + #define AU6601_INT_ADMA_ERROR 0x02000000 + + #define AU6601_INT_NORMAL_MASK 0x00007FFF + #define AU6601_INT_ERROR_MASK 0xFFFF8000 + +/* magic 0xF0001 */ + #define AU6601_INT_CMD_MASK (AU6601_INT_RESPONSE | AU6601_INT_TIMEOUT | \ + AU6601_INT_CRC | AU6601_INT_END_BIT | AU6601_INT_INDEX) +/* magic 0x70003A */ + #define AU6601_INT_DATA_MASK (AU6601_INT_DATA_END | AU6601_INT_DMA_END | \ + AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL | \ + AU6601_INT_DATA_TIMEOUT | AU6601_INT_DATA_CRC | \ + AU6601_INT_DATA_END_BIT) + #define AU6601_INT_ALL_MASK ((uint32_t)-1) + +bool disable_dma = 0; + +struct au6601_host { + struct pci_dev *pdev; + struct device *dev; + void __iomem *iobase; + void __iomem *virt_base; + dma_addr_t phys_base; + + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + unsigned int data_early:1; /* Data finished before cmd */ + unsigned int dma_on:1; + unsigned int trigger_dma_dac:1; /* Trigger Data after Command. + * In some cases data ragister + * should be triggered after + * command was done */ + + struct mutex cmd_mutex; + + struct timer_list timer; + + struct sg_mapping_iter sg_miter; /* SG state for PIO */ + unsigned int blocks; /* remaining PIO blocks */ + unsigned int requested_blocks; /* count of requested */ + int sg_count; /* Mapped sg entries */ +}; + +static void au6601_send_cmd(struct au6601_host *host, + struct mmc_command *cmd); + +static void au6601_prepare_data(struct au6601_host *host, + struct mmc_command *cmd); +static void au6601_finish_data(struct au6601_host *host); +static void au6601_request_complete(struct au6601_host *host); + +static const struct pci_device_id pci_ids[] = { + { + .vendor = PCI_ID_ALCOR_MICRO, + .device = PCI_ID_AU6601, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, + { /* end: all zeroes */ }, +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +static inline void au6601_rmw(void __iomem *reg, u32 clear, u32 set) +{ + u32 var; + + var = ioread32(reg); + var &= ~clear; + var |= set; + iowrite32(var, reg); +} + +static inline void au6601_mask_irqs(struct au6601_host *host) +{ + iowrite32(0, host->iobase + AU6601_REG_INT_ENABLE); +} + +static inline void au6601_unmask_irqs(struct au6601_host *host) +{ + iowrite32(AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | + AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | + AU6601_INT_CARD_INT | AU6601_INT_BUS_POWER, + host->iobase + AU6601_REG_INT_ENABLE); +} + +static void au6601_clear_set_reg86(struct au6601_host *host, u32 clear, u32 set) +{ + au6601_rmw(host->iobase + REG_86, clear, set); +} + +/* + * check if one of data line is pulled down + */ +static inline int au6601_card_busy(struct au6601_host *host) +{ + u8 status; + + status = (ioread8(host->iobase + AU6601_REG_BUS_STATUS) & + AU6601_BUS_STAT_DAT_MASK); + /* If all data lines are up, then card is not busy */ + if (status == (AU6601_BUS_STAT_DAT0 | AU6601_BUS_STAT_DAT1 | + AU6601_BUS_STAT_DAT2 | AU6601_BUS_STAT_DAT3)) + return 0; + + return 1; +} + +/* val = 0x1 abort command; 0x8 abort data? */ +static void au6601_reset(struct au6601_host *host, u8 val) +{ + int i; + + iowrite8(val | AU6601_RESET_UNK, host->iobase + AU6601_REG_SW_RESET); + for (i = 0; i < 100; i++) { + if (!(ioread8(host->iobase + AU6601_REG_SW_RESET) & val)) + return; + udelay(50); + } + dev_err(host->dev, "%s: timeout\n", __func__); +} + +/* + * - 0x8 only Vcc is on + * - 0x1 Vcc and other pins are on + * - 0x1 | 0x8 like 0x1, but DAT2 is off + */ +static void au6601_set_power(struct au6601_host *host, + unsigned int value, unsigned int set) +{ + u8 tmp1, tmp2; + + tmp1 = ioread8(host->iobase + REG_70); + tmp2 = ioread8(host->iobase + REG_7A); + if (set) { + iowrite8(tmp1 | value, host->iobase + REG_70); + iowrite8(tmp2 | value, host->iobase + REG_7A); + } else { + iowrite8(tmp2 & ~value, host->iobase + REG_7A); + iowrite8(tmp1 & ~value, host->iobase + REG_70); + } +} + +static void au6601_trigger_data_transfer(struct au6601_host *host, + unsigned int dma) +{ + struct mmc_data *data = host->data; + u8 ctrl = 0; + + if (data->flags & MMC_DATA_WRITE) + ctrl |= 0x80; + + if (dma) { + iowrite32(host->phys_base, host->iobase + AU6601_REG_SDMA_ADDR); + ctrl |= 0x40; + host->dma_on = 1; + + if (data->flags & MMC_DATA_WRITE) + goto done; + /* prepare first DMA buffer for write operation */ + if (host->blocks > AU6601_MAX_DMA_BLOCKS) + host->requested_blocks = AU6601_MAX_DMA_BLOCKS; + else + host->requested_blocks = host->blocks; + + } + +done: + iowrite32(data->blksz * host->requested_blocks, + host->iobase + AU6601_REG_BLOCK_SIZE); + iowrite8(ctrl | 0x1, host->iobase + REG_83); +} + +/*****************************************************************************\ + * * + * Core functions * + * * +\*****************************************************************************/ + +static void au6601_read_block(struct au6601_host *host) +{ + size_t blksize, len, chunk = 0; + void __iomem *virt_base = host->virt_base; + u8 *buf; + + dev_dbg(host->dev, "PIO reading\n"); + + blksize = host->data->blksz * host->requested_blocks; + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + if (host->dma_on) { + memcpy_fromio(buf, virt_base, len); + virt_base += len; + len = 0; + } else { + while (len) { + u32 scratch; + + if (chunk == 0) { + scratch = ioread32(host->iobase + + AU6601_REG_BUFFER); + chunk = 4; + } + + *buf = scratch & 0xFF; + + buf++; + scratch >>= 8; + chunk--; + len--; + } + } + } + + sg_miter_stop(&host->sg_miter); +} + +static void au6601_write_block(struct au6601_host *host) +{ + size_t blksize, len, chunk = 0; + void __iomem *virt_base = host->virt_base; + u32 scratch = 0; + u8 *buf; + + dev_dbg(host->dev, "PIO writing\n"); + + blksize = host->data->blksz * host->requested_blocks; + + while (blksize) { + if (!sg_miter_next(&host->sg_miter)) + BUG(); + + len = min(host->sg_miter.length, blksize); + + blksize -= len; + host->sg_miter.consumed = len; + + buf = host->sg_miter.addr; + + if (host->dma_on) { + memcpy_toio(virt_base, buf, len); + virt_base += len; + len = 0; + } else { + while (len) { + scratch |= (u32)*buf << (chunk * 8); + + buf++; + chunk++; + len--; + + if ((chunk == 4) || ((len == 0) + && (blksize == 0))) { + iowrite32(scratch, host->iobase + + AU6601_REG_BUFFER); + chunk = 0; + scratch = 0; + } + } + } + } + + sg_miter_stop(&host->sg_miter); +} + +static void au6601_transfer_data(struct au6601_host *host) +{ + if (host->blocks == 0) + return; + + if (host->data->flags & MMC_DATA_READ) + au6601_read_block(host); + else + au6601_write_block(host); + + host->blocks -= host->requested_blocks; + if (host->dma_on) { + host->dma_on = 0; + if (host->blocks || (!host->blocks && + (host->data->flags & MMC_DATA_WRITE))) + au6601_trigger_data_transfer(host, 1); + else + au6601_finish_data(host); + } + + dev_dbg(host->dev, "PIO transfer complete.\n"); +} + +static void au6601_finish_command(struct au6601_host *host) +{ + struct mmc_command *cmd = host->cmd; + + if (host->cmd->flags & MMC_RSP_PRESENT) { + cmd->resp[0] = ioread32be(host->iobase + AU6601_REG_CMD_RSP0); + if (host->cmd->flags & MMC_RSP_136) { + cmd->resp[1] = + ioread32be(host->iobase + AU6601_REG_CMD_RSP1); + cmd->resp[2] = + ioread32be(host->iobase + AU6601_REG_CMD_RSP2); + cmd->resp[3] = + ioread32be(host->iobase + AU6601_REG_CMD_RSP3); + } + + } + + host->cmd->error = 0; + + /* Finished CMD23, now send actual command. */ + if (host->cmd == host->mrq->sbc) { + host->cmd = NULL; + au6601_send_cmd(host, host->mrq->cmd); + } else { + /* Processed actual command. */ + if (!host->data) + au6601_request_complete(host); + else if (host->data_early) + au6601_finish_data(host); + else if (host->trigger_dma_dac) { + host->dma_on = 1; + au6601_transfer_data(host); + } + + host->cmd = NULL; + } +} + +static void au6601_finish_data(struct au6601_host *host) +{ + struct mmc_data *data; + + data = host->data; + host->data = NULL; + host->dma_on = 0; + host->trigger_dma_dac = 0; + + /* + * The specification states that the block count register must + * be updated, but it does not specify at what point in the + * data flow. That makes the register entirely useless to read + * back so we have to assume that nothing made it to the card + * in the event of an error. + */ + if (data->error) + data->bytes_xfered = 0; + else + data->bytes_xfered = data->blksz * data->blocks; + + /* + * Need to send CMD12 if - + * a) open-ended multiblock transfer (no CMD23) + * b) error in multiblock transfer + */ + if (data->stop && + (data->error || + !host->mrq->sbc)) { + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if (data->error) { + au6601_reset(host, AU6601_RESET_CMD); + au6601_reset(host, AU6601_RESET_DATA); + } + au6601_send_cmd(host, data->stop); + } else + au6601_request_complete(host); +} + +static void au6601_prepare_sg_miter(struct au6601_host *host) +{ + unsigned int flags = SG_MITER_ATOMIC; + struct mmc_data *data = host->data; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + +static void au6601_prepare_data(struct au6601_host *host, + struct mmc_command *cmd) +{ + unsigned int dma = 0; + struct mmc_data *data = cmd->data; + + if (!data) + return; + + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > AU6601_MAX_BLOCK_COUNT); + + host->data = data; + host->data_early = 0; + host->data->bytes_xfered = 0; + host->requested_blocks = 1; + + au6601_prepare_sg_miter(host); + host->blocks = data->blocks; + + if (!disable_dma && + host->blocks > 1 && + data->blksz == host->mmc->max_blk_size) { + dma = 1; + + if (data->flags & MMC_DATA_WRITE) { + /* prepare first write buffer */ + /* Don't trigger data transfer now. + * DMA may start it too eraly */ + host->trigger_dma_dac = 1; + return; + } + } + + au6601_trigger_data_transfer(host, dma); +} + +static void au6601_send_cmd(struct au6601_host *host, + struct mmc_command *cmd) +{ + u8 ctrl; /*some mysterious flags and control */ + unsigned long timeout; + + timeout = jiffies; + if (!cmd->data && cmd->busy_timeout > 9000) + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; + else + timeout += 10 * HZ; + mod_timer(&host->timer, timeout); + + host->cmd = cmd; + au6601_prepare_data(host, cmd); + + iowrite8(cmd->opcode | 0x40, host->iobase + AU6601_REG_CMD_OPCODE); + iowrite32be(cmd->arg, host->iobase + AU6601_REG_CMD_ARG); + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + ctrl = 0; + break; + case MMC_RSP_R1: + ctrl = 0x40; + break; + case MMC_RSP_R1B: + ctrl = 0x40 | 0x10; + break; + case MMC_RSP_R2: + ctrl = 0xc0; + break; + case MMC_RSP_PRESENT | MMC_RSP_OPCODE: + case MMC_RSP_R3: + ctrl = 0x80; + break; + default: + dev_err(host->dev, "%s: cmd->flag (0x%02x) is not valid\n", + mmc_hostname(host->mmc), mmc_resp_type(cmd)); + break; + } + + iowrite8(ctrl | 0x20, host->iobase + AU6601_REG_CMD_CTRL); +} + +/*****************************************************************************\ + * * + * Interrupt handling * + * * +\*****************************************************************************/ + +static void au6601_cmd_irq(struct au6601_host *host, u32 intmask) +{ + if (!host->cmd) { + dev_err(host->dev, + "Got command interrupt 0x%08x even though no command operation was in progress.\n", + intmask); + return; + } + + if (intmask & AU6601_INT_TIMEOUT) + host->cmd->error = -ETIMEDOUT; + else if (intmask & (AU6601_INT_CRC | AU6601_INT_END_BIT | + AU6601_INT_INDEX)) + host->cmd->error = -EILSEQ; + + if (host->cmd->error) { + au6601_request_complete(host); + return; + } + + /* + * The host can send and interrupt when the busy state has + * ended, allowing us to wait without wasting CPU cycles. + * Unfortunately this is overloaded on the "data complete" + * interrupt, so we need to take some care when handling + * it. + * + * Note: The 1.0 specification is a bit ambiguous about this + * feature so there might be some problems with older + * controllers. + */ + if (host->cmd->flags & MMC_RSP_BUSY) { + if (host->cmd->data) + dev_warn(host->dev, + "Cannot wait for busy signal when also doing a data transfer"); + } + + if (intmask & AU6601_INT_RESPONSE) + au6601_finish_command(host); +} + +static void au6601_data_irq(struct au6601_host *host, u32 intmask) +{ + if (!host->data) { + /* FIXME: Ist is same for AU6601 + * The "data complete" interrupt is also used to + * indicate that a busy state has ended. See comment + * above in au6601_cmd_irq(). + */ + if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) { + if (intmask & AU6601_INT_DATA_END) { + au6601_finish_command(host); + return; + } + } + + dev_err(host->dev, + "Got data interrupt 0x%08x even though no data operation was in progress.\n", + (unsigned)intmask); + + if (intmask & AU6601_INT_ERROR_MASK) { + host->cmd->error = -ETIMEDOUT; + au6601_request_complete(host); + } + return; + } + + if (intmask & AU6601_INT_DATA_TIMEOUT) + host->data->error = -ETIMEDOUT; + else if (intmask & AU6601_INT_DATA_END_BIT) + host->data->error = -EILSEQ; + else if (intmask & AU6601_INT_DATA_CRC) + host->data->error = -EILSEQ; + + if (host->data->error) + au6601_finish_data(host); + else { + if (intmask & (AU6601_INT_DATA_AVAIL | AU6601_INT_SPACE_AVAIL)) + au6601_transfer_data(host); + + if (intmask & AU6601_INT_DATA_END) { + if (host->cmd) { + /* + * Data managed to finish before the + * command completed. Make sure we do + * things in the proper order. + */ + host->data_early = 1; + } else if (host->blocks && !host->dma_on) { + /* + * Probably we do multi block operation. + * Prepare PIO for next block. + */ + au6601_trigger_data_transfer(host, 0); + } else if (host->blocks && host->dma_on) { + au6601_transfer_data(host); + } else { + if (host->dma_on) + au6601_transfer_data(host); + au6601_finish_data(host); + } + } + } +} + +static irqreturn_t au6601_irq(int irq, void *d) +{ + struct au6601_host *host = d; + irqreturn_t ret = IRQ_HANDLED; + u32 intmask; + + mutex_lock(&host->cmd_mutex); + + intmask = ioread32(host->iobase + AU6601_REG_INT_STATUS); + iowrite32(intmask, host->iobase + AU6601_REG_INT_STATUS); + + /* some thing bad */ + if (unlikely(!intmask || intmask == AU6601_INT_ALL_MASK)) { + ret = IRQ_NONE; + goto exit; + } + + if (intmask & AU6601_INT_CMD_MASK) { + dev_dbg(host->dev, "CMD IRQ %x\n", intmask); + + au6601_cmd_irq(host, intmask & AU6601_INT_CMD_MASK); + intmask &= ~AU6601_INT_CMD_MASK; + } + + if (intmask & AU6601_INT_DATA_MASK) { + dev_dbg(host->dev, "DATA IRQ %x\n", intmask); + au6601_data_irq(host, intmask & AU6601_INT_DATA_MASK); + intmask &= ~AU6601_INT_DATA_MASK; + } + + if (intmask & (AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE)) { + /* this check can be remove */ + if (intmask & AU6601_INT_CARD_REMOVE) + dev_dbg(host->dev, "card removed\n"); + else + dev_dbg(host->dev, "card inserted\n"); + + intmask &= ~(AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE); + mmc_detect_change(host->mmc, msecs_to_jiffies(200)); + } + + if (intmask & 0x100) { + dev_warn(host->dev, + "0x100 (card INT?) got unknown IRQ with %x\n", + intmask); + intmask &= ~0x100; + } + + if (intmask & 0xFFFF7FFF) { + dev_warn(host->dev, "0xFFFF7FFF got unhandled IRQ with %x\n", + intmask); + } + +exit: + mutex_unlock(&host->cmd_mutex); + return ret; +} + +static void au6601_sdc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct au6601_host *host; + + host = mmc_priv(mmc); + mutex_lock(&host->cmd_mutex); + + host->mrq = mrq; + + /* check if card is present then send command and data */ + if (ioread8(host->iobase + REG_76) & 0x1) + au6601_send_cmd(host, mrq->cmd); + else { + mrq->cmd->error = -ENOMEDIUM; + au6601_request_complete(host); + } + + mutex_unlock(&host->cmd_mutex); +} + +static void au6601_set_clock(struct au6601_host *host, unsigned int clock) +{ + unsigned int div = 0, mult = 0, ctrl = 0x1; + + /* FIXME: mesuered and calculated values are different. + * the clock is unstable in some mult/div combinations. + */ + if (clock >= MHZ_TO_HZ(208)) { + mult = 0xb0; /* 30 * ? / 2 = ?MHz */ + div = 2; + } else if (clock >= MHZ_TO_HZ(194)) { + mult = 0x30; /* 30 * 14 / 2 = 210MHz */ + div = 2; + } else if (clock >= MHZ_TO_HZ(130)) { + mult = 0x30; /* 30 * 14 / 3 = 140MHz */ + div = 3; + } else if (clock >= MHZ_TO_HZ(100)) { + mult = 0x30; /* 30 * 14 / 4 = 105MHz */ + div = 4; + } else if (clock >= MHZ_TO_HZ(80)) { + mult = 0x30; /* 30 * 14 / 5 = 84MHz */ + div = 5; + } else if (clock >= MHZ_TO_HZ(60)) { + mult = 0x30; /* 30 * 14 / 7 = 60MHz */ + div = 7; + } else if (clock >= MHZ_TO_HZ(50)) { + mult = 0x10; /* 30 * 2 / 1 = 60MHz */ + div = 1; + } else if (clock >= MHZ_TO_HZ(40)) { + mult = 0x30; /* 30 * 14 / 10 = 42MHz */ + div = 10; + } else if (clock >= MHZ_TO_HZ(25)) { + mult = 0x10; /* 30 * 2 / 2 = 30MHz */ + div = 2; + } else if (clock >= MHZ_TO_HZ(20)) { + mult = 0x20; /* 30 * 4 / 7 = 17MHz */ + div = 7; + } else if (clock >= MHZ_TO_HZ(10)) { + mult = 0x10; /* 30 * 2 / 5 = 12MHz */ + div = 5; + } else if (clock >= MHZ_TO_HZ(5)) { + mult = 0x10; /* 30 * 2 / 10 = 6MHz */ + div = 10; + } else if (clock >= MHZ_TO_HZ(1)) { + mult = 0x0; /* 30 / 16 = 1,8 MHz */ + div = 16; + } else if (clock == 0) { + ctrl = 0; + } else { + mult = 0x0; /* reversed 150 * 200 = 30MHz */ + div = 200; /* 150 KHZ mesured */ + } + dev_dbg(host->dev, "set freq %d, %x, %x\n", clock, div, mult); + iowrite16((div - 1) << 8 | mult | ctrl, + host->iobase + AU6601_REG_PLL_CTRL); +} + +static void au6601_sdc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct au6601_host *host; + + host = mmc_priv(mmc); + mutex_lock(&host->cmd_mutex); + + iowrite8(0, host->iobase + REG_85); + iowrite8(0x31, host->iobase + REG_7B); + iowrite8(0x33, host->iobase + REG_7C); + iowrite8(1, host->iobase + REG_75); + iowrite8(0, host->iobase + REG_85); + + if (ios->bus_width == MMC_BUS_WIDTH_1) { + iowrite8(0x0, + host->iobase + AU6601_REG_BUS_CTRL); + au6601_clear_set_reg86(host, 0xc0, 0); + } else if (ios->bus_width == MMC_BUS_WIDTH_4) { + iowrite8(AU6601_BUS_WIDTH_4BIT, + host->iobase + AU6601_REG_BUS_CTRL); + au6601_clear_set_reg86(host, 0, 0xc0); + } else + dev_err(host->dev, "Unknown BUS mode\n"); + + au6601_set_clock(host, ios->clock); + + switch (ios->power_mode) { + case MMC_POWER_OFF: + au6601_set_power(host, 0x1 | 0x8, 0); + break; + case MMC_POWER_UP: + au6601_set_power(host, 0x8, 1); + break; + case MMC_POWER_ON: + au6601_set_power(host, 0x1, 1); + au6601_set_power(host, 0x8, 0); + break; + default: + dev_err(host->dev, "Unknown power parametr\n"); + } + + iowrite8(0x80, host->iobase + REG_83); + iowrite8(0x7d, host->iobase + REG_69); + ioread8(host->iobase + REG_74); + mutex_unlock(&host->cmd_mutex); +} + +static int au6601_ops_card_busy(struct mmc_host *mmc) +{ + struct au6601_host *host = mmc_priv(mmc); + + return au6601_card_busy(host); +} + +static const struct mmc_host_ops au6601_sdc_ops = { + .request = au6601_sdc_request, + .set_ios = au6601_sdc_set_ios, + + .card_busy = au6601_ops_card_busy, +}; + +static void au6601_request_complete(struct au6601_host *host) +{ + struct mmc_request *mrq; + + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) + return; + + del_timer(&host->timer); + + mrq = host->mrq; + + /* + * The controller needs a reset of internal state machines + * upon error conditions. + */ + if ((mrq->cmd && mrq->cmd->error) || + (mrq->data && (mrq->data->error || + (mrq->data->stop && mrq->data->stop->error)))) { + + au6601_reset(host, AU6601_RESET_CMD); + au6601_reset(host, AU6601_RESET_DATA); + } + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + host->dma_on = 0; + host->trigger_dma_dac = 0; + + mmc_request_done(host->mmc, mrq); +} + +static void au6601_timeout_timer(unsigned long data) +{ + struct au6601_host *host; + + host = (struct au6601_host *)data; + + mutex_lock(&host->cmd_mutex); + + if (host->mrq) { + dev_err(host->dev, + "Timeout waiting for hardware interrupt.\n"); + + if (host->data) { + host->data->error = -ETIMEDOUT; + au6601_finish_data(host); + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->mrq->cmd->error = -ETIMEDOUT; + + au6601_request_complete(host); + } + } + + mmiowb(); + mutex_unlock(&host->cmd_mutex); +} + + + +static void au6601_init_mmc(struct au6601_host *host) +{ + struct mmc_host *mmc = host->mmc; + + mmc->f_min = AU6601_MIN_CLOCK; + mmc->f_max = AU6601_MAX_CLOCK; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY; + mmc->ops = &au6601_sdc_ops; + + /* Hardware cannot do scatter lists? */ + mmc->max_segs = AU6601_MAX_SEGMENTS; + + mmc->max_blk_size = AU6601_MAX_BLOCK_LENGTH; + mmc->max_blk_count = AU6601_MAX_BLOCK_COUNT; + + mmc->max_seg_size = AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS; + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; +} + +static void au6601_hw_init(struct au6601_host *host) +{ + + iowrite8(0, host->iobase + REG_74); + + iowrite8(0, host->iobase + REG_76); + /* disable DlinkMode? disabled by default. */ + iowrite8(0x80, host->iobase + REG_76); + + au6601_reset(host, AU6601_RESET_CMD); + + iowrite8(0x0, host->iobase + REG_05); + iowrite8(0x1, host->iobase + REG_75); + + au6601_unmask_irqs(host); + + iowrite32(0x0, host->iobase + AU6601_REG_BUS_CTRL); + + au6601_reset(host, AU6601_RESET_DATA); + + iowrite8(0x0, host->iobase + REG_05); + iowrite8(0x0, host->iobase + REG_85); + iowrite8(0x8, host->iobase + REG_75); + iowrite32(0x3d00fa, host->iobase + REG_B4); + + au6601_set_power(host, 0x1, 0); + au6601_set_power(host, 0x8, 0); + + host->dma_on = 0; +} + +static int __init au6601_dma_alloc(struct au6601_host *host) +{ + int ret; + + ret = pci_set_dma_mask(host->pdev, AU6601_SDMA_MASK); + if (ret) { + dev_err(host->dev, "Failed to set DMA mask\n"); + return ret; + } + + host->virt_base = dmam_alloc_coherent(host->dev, + AU6601_MAX_BLOCK_LENGTH * AU6601_MAX_DMA_BLOCKS * AU6601_DMA_LOCAL_SEGMENTS, + &host->phys_base, GFP_KERNEL); + + if (!host->virt_base) { + dev_err(host->dev, "Failed to alloc DMA\n"); + return -ENOMEM; + } + + return 0; +} + +static int __init au6601_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct mmc_host *mmc; + struct au6601_host *host; + int ret, bar = 0; + + dev_info(&pdev->dev, "AU6601 controller found [%04x:%04x] (rev %x)\n", + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); + + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { + dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); + return -ENODEV; + } + + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + /* FIXME: create managed version of mmc_alloc_host and use it */ + mmc = mmc_alloc_host(sizeof(struct au6601_host *), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "Can't allocate MMC\n"); + return -ENOMEM; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + host->dev = &pdev->dev; + + ret = pci_request_region(pdev, bar, DRVNAME); + if (ret) { + dev_err(&pdev->dev, "Cannot request region\n"); + return -ENOMEM; + } + + host->iobase = pcim_iomap(pdev, bar, 0); + if (!host->iobase) + return -ENOMEM; + + ret = devm_request_threaded_irq(&pdev->dev, pdev->irq, NULL, au6601_irq, + IRQF_ONESHOT, "au6601 host", + host); + + if (ret) { + dev_err(&pdev->dev, "Failed to get irq for data line\n"); + return -ENOMEM; + } + + ret = au6601_dma_alloc(host); + if (ret) + return ret; + + pci_set_master(pdev); + pci_set_drvdata(pdev, host); + + mutex_init(&host->cmd_mutex); + /* + * Init tasklets. + */ + setup_timer(&host->timer, au6601_timeout_timer, (unsigned long)host); + + au6601_init_mmc(host); + au6601_hw_init(host); + + mmc_add_host(mmc); + return 0; +} + +static void au6601_hw_uninit(struct au6601_host *host) +{ + iowrite8(0x0, host->iobase + REG_76); + au6601_mask_irqs(host); + + au6601_set_power(host, 0x1, 0); + + iowrite8(0x0, host->iobase + REG_85); + iowrite8(0x0, host->iobase + REG_B4); + + au6601_set_power(host, 0x8, 0); +} + +static void __exit au6601_pci_remove(struct pci_dev *pdev) +{ + struct au6601_host *host; + + host = pci_get_drvdata(pdev); + + au6601_hw_uninit(host); + + del_timer_sync(&host->timer); + + mmc_remove_host(host->mmc); + mmc_free_host(host->mmc); +} + +#ifdef CONFIG_PM_SLEEP +static int au6601_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct au6601_host *host = pci_get_drvdata(pdev); + + au6601_hw_uninit(host); + return 0; +} + +static int au6601_resume(struct device *dev) +{ + + struct pci_dev *pdev = to_pci_dev(dev); + struct au6601_host *host = pci_get_drvdata(pdev); + + au6601_hw_init(host); + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(au6601_pm_ops, au6601_suspend, au6601_resume); + +static struct pci_driver au6601_driver = { + .name = DRVNAME, + .id_table = pci_ids, + .probe = au6601_pci_probe, + .remove = au6601_pci_remove, + .driver = { + .pm = &au6601_pm_ops + }, +}; + +module_pci_driver(au6601_driver); + +module_param(disable_dma, bool, S_IRUGO); +MODULE_PARM_DESC(disable_dma, "Disable DMA"); + +MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); +MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface"); +MODULE_LICENSE("GPL");
This driver is based on documentation which was based on my RE-work and comparision with other MMC drivers. It works in legacy mode and can provide 20MB/s R/W spead for most modern SD cards, even if at least 40MB/s should be possible on this hardware. It was not possible provide description for all register. But some of them are important to make this hardware work in some unknown way. Biggest part of RE-work was done by emulating AU6601 in QEMU. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> --- drivers/mmc/host/Kconfig | 8 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/au6601.c | 1215 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1224 insertions(+) create mode 100644 drivers/mmc/host/au6601.c