| Message ID | 1412618020-22278-1-git-send-email-sonnyrao@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Sonny, On Mon, Oct 6, 2014 at 10:53 AM, Sonny Rao <sonnyrao@chromium.org> wrote: > We've already got a reset of DMA after it's done. Add one before we > start DMA too. This fixes a data corruption on Rockchip SoCs which > will get bad data when doing a DMA transfer after doing a PIO transfer. > > We tested this on an Exynos 5800 with HS200 and didn't notice any > difference in sequential read throughput. > > Signed-off-by: Sonny Rao <sonnyrao@chromium.org> > Signed-off-by: Doug Anderson <dianders@chromium.org> > --- > drivers/mmc/host/dw_mmc.c | 4 ++++ > 1 file changed, 4 insertions(+) Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Acked-by: Jaehoon Chung <jh80.chung@samsung.com> On 10/07/2014 03:11 AM, Doug Anderson wrote: > Sonny, > > On Mon, Oct 6, 2014 at 10:53 AM, Sonny Rao <sonnyrao@chromium.org> wrote: >> We've already got a reset of DMA after it's done. Add one before we >> start DMA too. This fixes a data corruption on Rockchip SoCs which >> will get bad data when doing a DMA transfer after doing a PIO transfer. >> >> We tested this on an Exynos 5800 with HS200 and didn't notice any >> difference in sequential read throughput. >> >> Signed-off-by: Sonny Rao <sonnyrao@chromium.org> >> Signed-off-by: Doug Anderson <dianders@chromium.org> >> --- >> drivers/mmc/host/dw_mmc.c | 4 ++++ >> 1 file changed, 4 insertions(+) > > Reviewed-by: Doug Anderson <dianders@chromium.org> > Tested-by: Doug Anderson <dianders@chromium.org> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sonny/Doug, On Mon, Oct 6, 2014 at 11:23 PM, Sonny Rao <sonnyrao@chromium.org> wrote: > We've already got a reset of DMA after it's done. Add one before we > start DMA too. This fixes a data corruption on Rockchip SoCs which > will get bad data when doing a DMA transfer after doing a PIO transfer. > > We tested this on an Exynos 5800 with HS200 and didn't notice any > difference in sequential read throughput. > > Signed-off-by: Sonny Rao <sonnyrao@chromium.org> > Signed-off-by: Doug Anderson <dianders@chromium.org> > --- > drivers/mmc/host/dw_mmc.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 69f0cc6..2b5401e 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -83,6 +83,7 @@ struct idmac_desc { > #endif /* CONFIG_MMC_DW_IDMAC */ > > static bool dw_mci_reset(struct dw_mci *host); > +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); > > #if defined(CONFIG_DEBUG_FS) > static int dw_mci_req_show(struct seq_file *s, void *v) > @@ -448,6 +449,9 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) > > dw_mci_translate_sglist(host, host->data, sg_len); > > + /* Make sure to reset DMA in case we did PIO before this */ > + dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET); > + Though this is good to do, but this does not look complete to me. dw_mmc data book does mention that " It is recommended that the host issue reset to DMA interface by setting DMA_RESET bit of the CTRL register and then issue a IDMAC software reset." The above lines are from 'Transmission and reception with internal DMA' section of the data book. My suggestion here to add dw_mci_idmac_reset() call after this above change. What is the controller version used in your case? > /* Select IDMAC interface */ > temp = mci_readl(host, CTRL); > temp |= SDMMC_CTRL_USE_IDMAC; > -- > 1.8.3.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Eddie, On Thu, Oct 9, 2014 at 7:43 PM, Eddie Cai(??) <eddie.cai@rock-chips.com> wrote: > Hi Alim > > 2014?10?8? ??4:28? "Alim Akhtar" <alim.akhtar@gmail.com>??? > > >> >> Hi Sonny/Doug, >> >> On Mon, Oct 6, 2014 at 11:23 PM, Sonny Rao <sonnyrao@chromium.org> wrote: >> > We've already got a reset of DMA after it's done. Add one before we >> > start DMA too. This fixes a data corruption on Rockchip SoCs which >> > will get bad data when doing a DMA transfer after doing a PIO transfer. >> > >> > We tested this on an Exynos 5800 with HS200 and didn't notice any >> > difference in sequential read throughput. >> > >> > Signed-off-by: Sonny Rao <sonnyrao@chromium.org> >> > Signed-off-by: Doug Anderson <dianders@chromium.org> >> > --- >> > drivers/mmc/host/dw_mmc.c | 4 ++++ >> > 1 file changed, 4 insertions(+) >> > >> > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> > index 69f0cc6..2b5401e 100644 >> > --- a/drivers/mmc/host/dw_mmc.c >> > +++ b/drivers/mmc/host/dw_mmc.c >> > @@ -83,6 +83,7 @@ struct idmac_desc { >> > #endif /* CONFIG_MMC_DW_IDMAC */ >> > >> > static bool dw_mci_reset(struct dw_mci *host); >> > +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); >> > >> > #if defined(CONFIG_DEBUG_FS) >> > static int dw_mci_req_show(struct seq_file *s, void *v) >> > @@ -448,6 +449,9 @@ static void dw_mci_idmac_start_dma(struct dw_mci >> > *host, unsigned int sg_len) >> > >> > dw_mci_translate_sglist(host, host->data, sg_len); >> > >> > + /* Make sure to reset DMA in case we did PIO before this */ >> > + dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET); >> > + >> Though this is good to do, but this does not look complete to me. >> dw_mmc data book does mention that " It is recommended that the host >> issue reset to DMA interface by setting DMA_RESET bit of the CTRL >> register and then issue a IDMAC software reset." >> The above lines are from 'Transmission and reception with internal >> DMA' section of the data book. >> My suggestion here to add dw_mci_idmac_reset() call after this above >> change. >> >> What is the controller version used in your case? > > it just compatible with dw mmc controler but not the same one. it is > designed by rockchip. > Thats fine, I think every vendor (most of them) has a custom implementation of dw_mmc, but they do have VERID register to check the dw_mmc version. The reason why I asked is, I have seen inconsistency in card enumeration on few controller version, and this patch alone does not help, and adding a call to dw_mci_idmac_reset() after DMA reset is needed. And this is what is recommended in the synopsys's data book also. Do you see any issue/side effect after adding dw_mci_idmac_reset()? >> > /* Select IDMAC interface */ >> > temp = mci_readl(host, CTRL); >> > temp |= SDMMC_CTRL_USE_IDMAC; >> > -- >> > 1.8.3.2 >> > >> > -- >> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> > the body of a message to majordomo@vger.kernel.org >> > More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> -- >> Regards, >> Alim >> >>
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 69f0cc6..2b5401e 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -83,6 +83,7 @@ struct idmac_desc { #endif /* CONFIG_MMC_DW_IDMAC */ static bool dw_mci_reset(struct dw_mci *host); +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); #if defined(CONFIG_DEBUG_FS) static int dw_mci_req_show(struct seq_file *s, void *v) @@ -448,6 +449,9 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) dw_mci_translate_sglist(host, host->data, sg_len); + /* Make sure to reset DMA in case we did PIO before this */ + dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET); + /* Select IDMAC interface */ temp = mci_readl(host, CTRL); temp |= SDMMC_CTRL_USE_IDMAC;