Message ID | 1413890597-31037-3-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hello Krzysztof, On 10/21/2014 01:23 PM, Krzysztof Kozlowski wrote: > Some LDOs of Maxim 77686 PMIC support disabling during system suspend > (LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part > of set_suspend_mode function. In that case the mode was one of: > - disable, > - normal mode, > - low power mode. > However there are no bindings for setting the mode during suspend. > > Add suspend disable for LDO regulators supporting this to the existing > max77686_buck_set_suspend_disable() function. This helps reducing > energy consumption during system sleep. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > --- > drivers/regulator/max77686.c | 33 ++++++++++++++++++++++++++++----- > 1 file changed, 28 insertions(+), 5 deletions(-) > > diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c > index cffe0c69d57d..05df72d584bf 100644 > --- a/drivers/regulator/max77686.c > +++ b/drivers/regulator/max77686.c > @@ -79,17 +79,33 @@ struct max77686_data { > }; > > /* Some BUCKS supports Normal[ON/OFF] mode during suspend */ > -static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev) > +static int max77686_set_suspend_disable(struct regulator_dev *rdev) > { > unsigned int val; > struct max77686_data *max77686 = rdev_get_drvdata(rdev); > int ret, id = rdev_get_id(rdev); > > - if (id == MAX77686_BUCK1) > + switch (id) { > + case MAX77686_BUCK1: > val = MAX77686_OPMODE_OFF_PWRREQ; > - else > + break; > + case MAX77686_BUCK2: > + case MAX77686_BUCK3: > + case MAX77686_BUCK4: > val = MAX77686_OPMODE_OFF_PWRREQ > << MAX77686_OPMODE_BUCK234_SHIFT; > + break; > + case MAX77686_LDO2: > + case MAX77686_LDO6 ... MAX77686_LDO8: > + case MAX77686_LDO10 ... MAX77686_LDO12: > + case MAX77686_LDO14 ... MAX77686_LDO16: > + val = MAX77686_OPMODE_OFF_PWRREQ << MAX77686_OPMODE_SHIFT; > + break; > + default: > + pr_warn("%s: regulator_suspend_disable not supported\n", > + rdev->desc->name); > + return -EINVAL; > + } > > ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, > rdev->desc->enable_mask, val); > @@ -171,6 +187,9 @@ static int max77686_enable(struct regulator_dev *rdev) > { > struct max77686_data *max77686 = rdev_get_drvdata(rdev); > > + if (max77686->opmode[rdev_get_id(rdev)] == MAX77686_OPMODE_OFF_PWRREQ) > + max77686->opmode[rdev_get_id(rdev)] = MAX77686_OPMODE_NORMAL; > + > return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, > rdev->desc->enable_mask, > max77686->opmode[rdev_get_id(rdev)]); > @@ -223,6 +242,8 @@ static struct regulator_ops max77686_ldo_ops = { > .set_voltage_sel = regulator_set_voltage_sel_regmap, > .set_voltage_time_sel = regulator_set_voltage_time_sel, > .set_suspend_mode = max77686_ldo_set_suspend_mode, > + .set_suspend_disable = max77686_set_suspend_disable, > + .set_suspend_enable = max77686_enable, > }; > > static struct regulator_ops max77686_buck1_ops = { > @@ -234,7 +255,8 @@ static struct regulator_ops max77686_buck1_ops = { > .get_voltage_sel = regulator_get_voltage_sel_regmap, > .set_voltage_sel = regulator_set_voltage_sel_regmap, > .set_voltage_time_sel = regulator_set_voltage_time_sel, > - .set_suspend_disable = max77686_buck_set_suspend_disable, > + .set_suspend_disable = max77686_set_suspend_disable, > + .set_suspend_enable = max77686_enable, > }; > > static struct regulator_ops max77686_buck_dvs_ops = { > @@ -247,7 +269,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { > .set_voltage_sel = regulator_set_voltage_sel_regmap, > .set_voltage_time_sel = regulator_set_voltage_time_sel, > .set_ramp_delay = max77686_set_ramp_delay, > - .set_suspend_disable = max77686_buck_set_suspend_disable, > + .set_suspend_disable = max77686_set_suspend_disable, > + .set_suspend_enable = max77686_enable, > }; > > #define regulator_desc_ldo(num) { \ > Looks good to me. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Best regards, Javier
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index cffe0c69d57d..05df72d584bf 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -79,17 +79,33 @@ struct max77686_data { }; /* Some BUCKS supports Normal[ON/OFF] mode during suspend */ -static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev) +static int max77686_set_suspend_disable(struct regulator_dev *rdev) { unsigned int val; struct max77686_data *max77686 = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - if (id == MAX77686_BUCK1) + switch (id) { + case MAX77686_BUCK1: val = MAX77686_OPMODE_OFF_PWRREQ; - else + break; + case MAX77686_BUCK2: + case MAX77686_BUCK3: + case MAX77686_BUCK4: val = MAX77686_OPMODE_OFF_PWRREQ << MAX77686_OPMODE_BUCK234_SHIFT; + break; + case MAX77686_LDO2: + case MAX77686_LDO6 ... MAX77686_LDO8: + case MAX77686_LDO10 ... MAX77686_LDO12: + case MAX77686_LDO14 ... MAX77686_LDO16: + val = MAX77686_OPMODE_OFF_PWRREQ << MAX77686_OPMODE_SHIFT; + break; + default: + pr_warn("%s: regulator_suspend_disable not supported\n", + rdev->desc->name); + return -EINVAL; + } ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -171,6 +187,9 @@ static int max77686_enable(struct regulator_dev *rdev) { struct max77686_data *max77686 = rdev_get_drvdata(rdev); + if (max77686->opmode[rdev_get_id(rdev)] == MAX77686_OPMODE_OFF_PWRREQ) + max77686->opmode[rdev_get_id(rdev)] = MAX77686_OPMODE_NORMAL; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, max77686->opmode[rdev_get_id(rdev)]); @@ -223,6 +242,8 @@ static struct regulator_ops max77686_ldo_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_suspend_mode = max77686_ldo_set_suspend_mode, + .set_suspend_disable = max77686_set_suspend_disable, + .set_suspend_enable = max77686_enable, }; static struct regulator_ops max77686_buck1_ops = { @@ -234,7 +255,8 @@ static struct regulator_ops max77686_buck1_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_suspend_disable = max77686_buck_set_suspend_disable, + .set_suspend_disable = max77686_set_suspend_disable, + .set_suspend_enable = max77686_enable, }; static struct regulator_ops max77686_buck_dvs_ops = { @@ -247,7 +269,8 @@ static struct regulator_ops max77686_buck_dvs_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = max77686_set_ramp_delay, - .set_suspend_disable = max77686_buck_set_suspend_disable, + .set_suspend_disable = max77686_set_suspend_disable, + .set_suspend_enable = max77686_enable, }; #define regulator_desc_ldo(num) { \
Some LDOs of Maxim 77686 PMIC support disabling during system suspend (LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part of set_suspend_mode function. In that case the mode was one of: - disable, - normal mode, - low power mode. However there are no bindings for setting the mode during suspend. Add suspend disable for LDO regulators supporting this to the existing max77686_buck_set_suspend_disable() function. This helps reducing energy consumption during system sleep. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- drivers/regulator/max77686.c | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-)