diff mbox

[5/5] ARM: dts: Add dts files for Exynos4415 SoC

Message ID 1413775935-17743-5-git-send-email-cw00.choi@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chanwoo Choi Oct. 20, 2014, 3:32 a.m. UTC 
This patch adds new exynos4415.dtsi to support Exynos4415 SoC
based on Cortex-A9 quad cores and includes following dt nodes:

- GIC interrupt controller (GIC-400)
- Pinctrl to control three GPIO parts
- CMU (Clock Management Unit) for CMU/CMU_DMC/AUDSS
- CPU information (Cortex-A9 quad cores)
- UART to support serial port
- MCT (Multi Core Timer)
- ADC (Analog Digital Converter)
- RTC (Real Time Clock)
- I2C/SPI busses
- Power domains (CAM, TV, MFC, G3D, LCD0, ISP0/1)
- PMU (Performance Monitoring Unit)
- MSHC (Mobile Storage Host Controller)
- EHCI (Enhanced Host Controller Interface)
- OHIC (Open Host Controller Interface)
- USB 2.0 device with hsotg
- PWM (Pluse Width Modulation) Timer
- AMBA bus for PDMA0/1
- SYSRAM node for memory mapping
- SYSREG node for memory mapping
- PMU (Power Management Unit) node for memory mapping

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[m.szyprowski: Add OHCI node and correct EHCI node]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[yj44.cho: Add mipi-phy node]
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
[jaewon02: Add EHCI and SPI_2 node]
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
[ideal.song: Add I2S0 node for audio interface]
Signed-off-by: Inha Song <ideal.song@samsung.com>
[tomasz.figa: Add L2 cache node]
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Kyungmin Park <Kyungmin Park@samsung.com>
---
 arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 613 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos4415.dtsi         | 627 ++++++++++++++++++++++++++++++
 2 files changed, 1240 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4415-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/exynos4415.dtsi

Comments

Daniel Drake Oct. 24, 2014, 1:23 p.m. UTC | #1 
On Sun, Oct 19, 2014 at 9:32 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch adds new exynos4415.dtsi to support Exynos4415 SoC
> based on Cortex-A9 quad cores and includes following dt nodes:

There's a lot in common between your new exynos4415.dtsi and the
existing exynos4.dtsi.
Would it make more sense for the 4415 code to extend the existing
exynos4.dtsi like the other Exynos4 variants do?

Thanks
Daniel
Tomasz Figa Oct. 24, 2014, 1:30 p.m. UTC | #2 
On 24.10.2014 15:23, Daniel Drake wrote:
> On Sun, Oct 19, 2014 at 9:32 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch adds new exynos4415.dtsi to support Exynos4415 SoC
>> based on Cortex-A9 quad cores and includes following dt nodes:
> 
> There's a lot in common between your new exynos4415.dtsi and the
> existing exynos4.dtsi.
> Would it make more sense for the 4415 code to extend the existing
> exynos4.dtsi like the other Exynos4 variants do?

This would make sense, but then existing Exynos 4 device tree sources
would have to be refactored to use reference-based syntax for extending
nodes. (Which is desirable anyway, but adds quite a bit of effort and
could be prone to conflicts.) I'd say that they could be merged later
anyway.

Best regards,
Tomasz
Marek Szyprowski Oct. 24, 2014, 1:34 p.m. UTC | #3 
Hello,

On 2014-10-24 15:23, Daniel Drake wrote:
> On Sun, Oct 19, 2014 at 9:32 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch adds new exynos4415.dtsi to support Exynos4415 SoC
>> based on Cortex-A9 quad cores and includes following dt nodes:
> There's a lot in common between your new exynos4415.dtsi and the
> existing exynos4.dtsi.
> Would it make more sense for the 4415 code to extend the existing
> exynos4.dtsi like the other Exynos4 variants do?

Well, I also thought about such approach, but there are some fundamental 
differences:
interrupt and clock controllers are completely different. Using a common 
exynos4.dtsi
and overriding them in every node will result in a code, which is a bit 
hard to follow.
IMHO with such differences justifies using separate base dtsi file.

Best regards
Daniel Drake Oct. 24, 2014, 1:44 p.m. UTC | #4 
On Fri, Oct 24, 2014 at 7:34 AM, Marek Szyprowski
<m.szyprowski@samsung.com> wrote:
> Well, I also thought about such approach, but there are some fundamental
> differences:
> interrupt and clock controllers are completely different. Using a common
> exynos4.dtsi
> and overriding them in every node will result in a code, which is a bit hard
> to follow.
> IMHO with such differences justifies using separate base dtsi file.

For the things that aren't in common, they are already split out into
soc-specific files for the existing Exynos4 variants. Taking your
example of the CMU, it already differs in different exynos4 versions
therefore is not listed in exynos4.dtsi at all.

So this argument only seems valid if the differences are really huge,
or if you are also saying the existing exynos4 dts files are bad?
Personally I have come to like the current layout, although would
definitely appreciate the reference-based syntax mentioned by Tomasz,
and this seems like a good opportunity to at least fix up exynos4.dtsi
for that.

Daniel
Chanwoo Choi Oct. 24, 2014, 1:53 p.m. UTC | #5 
Hi Daniel,

On 10/24/2014 10:23 PM, Daniel Drake wrote:
> On Sun, Oct 19, 2014 at 9:32 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch adds new exynos4415.dtsi to support Exynos4415 SoC
>> based on Cortex-A9 quad cores and includes following dt nodes:
> 
> There's a lot in common between your new exynos4415.dtsi and the
> existing exynos4.dtsi.
> Would it make more sense for the 4415 code to extend the existing
> exynos4.dtsi like the other Exynos4 variants do?

I explained the difference between Exynos4415 and existing Exynos4 series
on mail-thread of exynos4415 clock controller.

Exynos4415 has difference clock id from existing Exynos4 clock controller.
because exynos4415 clock controller has fewer difference from Exynos4 series.

Best Regards,
Chanwoo Choi
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
new file mode 100644
index 0000000..5ce4314
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -0,0 +1,613 @@ 
+/*
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	mp00: mp00 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp01: mp01 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	
+	mp02: mp02 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp03: mp03 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp04: mp04 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp05: mp05 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp06: mp06 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <4>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	etc: etc {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
new file mode 100644
index 0000000..e3c81c1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -0,0 +1,627 @@ 
+/*
+ * Samsung's Exynos4415 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos4415.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+	compatible = "samsung,exynos4415";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		mshc2 = &mshc_2;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa00>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa01>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa02>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa03>;
+			clock-frequency = <1600000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fixed-rate-clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xusbxti: clock@0 {
+				compatible = "fixed-clock";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xusbxti";
+			};
+
+			xxti: clock@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xxti";
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x50000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x50000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@4f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x4f000 0x1000>;
+			};
+		};
+
+		pinctrl_2: pinctrl@03860000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 242 0>;
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sysreg_system_controller: syscon@10010000 {
+			compatible = "samsung,exynos4-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos4415-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		mipi_phy: video-phy@10020710 {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			reg = <0x10020710 8>;
+			#phy-cells = <1>;
+		};
+
+		pd_cam: cam-power-domain@10024000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024000 0x20>;
+		};
+
+		pd_tv: tv-power-domain@10024020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024020 0x20>;
+		};
+
+		pd_mfc: mfc-power-domain@10024040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024040 0x20>;
+		};
+
+		pd_g3d: g3d-power-domain@10024060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024060 0x20>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10024080 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024080 0x20>;
+		};
+	
+		pd_isp0: isp0-power-domain@100240A0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100240A0 0x20>;
+		};
+
+		pd_isp1: isp1-power-domain@100240E0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100240E0 0x20>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos4415-cmu";
+			reg = <0x10030000 0x18000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,exynos3250-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		l2c: l2-cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <3 2 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <1>;
+			arm,prefetch-offset = <7>;
+		};
+
+		cmu_dmc: clock-controller@105C0000 {
+			compatible = "samsung,exynos4415-cmu-dmc";
+			reg = <0x105C0000 0x3000>;
+			#clock-cells = <1>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		hsotg: hsotg@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0x12480000 0x20000>;
+			interrupts = <0 141 0>;
+			clocks = <&cmu CLK_USBDEVICE>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_2: mshc@12530000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12530000 0x1000>;
+			interrupts = <0 144 0>;
+			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci: ehci@12580000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12580000 0x100>;
+			interrupts = <0 140 0>;
+			clocks = <&cmu CLK_USBHOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&exynos_usbphy 1>;
+				status = "disabled";
+			};
+			port@1 {
+				reg = <1>;
+				phys = <&exynos_usbphy 2>;
+				status = "disabled";
+			};
+			port@2 {
+				reg = <2>;
+				phys = <&exynos_usbphy 3>;
+				status = "disabled";
+			};
+		};
+
+		ohci: ohci@12590000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12590000 0x100>;
+			interrupts = <0 140 0>;
+			clocks = <&cmu CLK_USBHOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&exynos_usbphy 1>;
+				status = "disabled";
+			};
+		};
+
+		exynos_usbphy: exynos-usbphy@125B0000 {
+			compatible = "samsung,exynos4x12-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos3250-adc",
+				     "samsung,exynos-adc-v2";
+			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <0 111 0>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@13830000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13830000 0x100>;
+			interrupts = <0 112 0>;
+			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		spi_2: spi@13940000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13940000 0x100>;
+			interrupts = <0 123 0>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			status = "disabled";
+		};
+
+		clock_audss: clock-controller@03810000 {
+			compatible = "samsung,exynos4210-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+		};
+
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0x03830000 0x100>;
+			interrupts = <0 124 0>;
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			         <&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			samsung,idma-addr = <0x03000000>;
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
+		};
+	};
+};
+
+#include "exynos4415-pinctrl.dtsi"