| Message ID | 1412181777-6388-1-git-send-email-a.kesavan@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kukjin, On Wed, Oct 1, 2014 at 10:12 PM, Abhilash Kesavan <a.kesavan@samsung.com> wrote: > Remove usage of CONFIG_SERIAL_SAMSUNG_UARTS symbol from platform > specific code. > > Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> > Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Can you please pick this up if it looks OK ? Abhilash > --- > Changes in v2: > - Re-ordered the patches > - Added a define for number of uart ports in arch/arm/plat-samsung/init.c > - Removed CONFIG_SERIAL_SAMSUNG #ifdef in arch/arm/plat-samsung/init.c > > Build tested using s3c2410_defconfig, s3c6400_defconfig, exynos_defconfig > and arm64's defconfig with and without the serial driver enabled. Boot tested > on Exynos5420 and Exynos7. > > arch/arm/mach-s3c64xx/irq-pm.c | 6 +++--- > arch/arm/plat-samsung/init.c | 7 ++----- > 2 files changed, 5 insertions(+), 8 deletions(-) > > diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c > index ae4ea76..b20024e 100644 > --- a/arch/arm/mach-s3c64xx/irq-pm.c > +++ b/arch/arm/mach-s3c64xx/irq-pm.c > @@ -55,10 +55,10 @@ static struct irq_grp_save { > u32 mask; > } eint_grp_save[5]; > > -#ifndef CONFIG_SERIAL_SAMSUNG_UARTS > -#define SERIAL_SAMSUNG_UARTS 0 > +#ifndef CONFIG_SERIAL_SAMSUNG > +#define SERIAL_SAMSUNG_UARTS 0 > #else > -#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS > +#define SERIAL_SAMSUNG_UARTS 4 > #endif > > static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; > diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c > index 11fbbc2..6114942 100644 > --- a/arch/arm/plat-samsung/init.c > +++ b/arch/arm/plat-samsung/init.c > @@ -92,10 +92,9 @@ void __init s3c24xx_init_clocks(int xtal) > /* uart management */ > #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) > static int nr_uarts __initdata = 0; > +#define MAX_UART_PORTS 4 > > -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS > -static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; > -#endif > +static struct s3c2410_uartcfg uart_cfgs[MAX_UART_PORTS]; > > /* s3c24xx_init_uartdevs > * > @@ -110,7 +109,6 @@ void __init s3c24xx_init_uartdevs(char *name, > struct s3c24xx_uart_resources *res, > struct s3c2410_uartcfg *cfg, int no) > { > -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS > struct platform_device *platdev; > struct s3c2410_uartcfg *cfgptr = uart_cfgs; > struct s3c24xx_uart_resources *resp; > @@ -133,7 +131,6 @@ void __init s3c24xx_init_uartdevs(char *name, > } > > nr_uarts = no; > -#endif > } > > void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kukjin, On Mon, Oct 20, 2014 at 7:11 PM, Abhilash Kesavan <kesavan.abhilash@gmail.com> wrote: > Hi Kukjin, > > On Wed, Oct 1, 2014 at 10:12 PM, Abhilash Kesavan <a.kesavan@samsung.com> wrote: >> Remove usage of CONFIG_SERIAL_SAMSUNG_UARTS symbol from platform >> specific code. >> >> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> >> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> > > Can you please pick this up if it looks OK ? A gentle reminder on these 2 patches. Abhilash > > Abhilash >> --- >> Changes in v2: >> - Re-ordered the patches >> - Added a define for number of uart ports in arch/arm/plat-samsung/init.c >> - Removed CONFIG_SERIAL_SAMSUNG #ifdef in arch/arm/plat-samsung/init.c >> >> Build tested using s3c2410_defconfig, s3c6400_defconfig, exynos_defconfig >> and arm64's defconfig with and without the serial driver enabled. Boot tested >> on Exynos5420 and Exynos7. >> >> arch/arm/mach-s3c64xx/irq-pm.c | 6 +++--- >> arch/arm/plat-samsung/init.c | 7 ++----- >> 2 files changed, 5 insertions(+), 8 deletions(-) >> >> diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c >> index ae4ea76..b20024e 100644 >> --- a/arch/arm/mach-s3c64xx/irq-pm.c >> +++ b/arch/arm/mach-s3c64xx/irq-pm.c >> @@ -55,10 +55,10 @@ static struct irq_grp_save { >> u32 mask; >> } eint_grp_save[5]; >> >> -#ifndef CONFIG_SERIAL_SAMSUNG_UARTS >> -#define SERIAL_SAMSUNG_UARTS 0 >> +#ifndef CONFIG_SERIAL_SAMSUNG >> +#define SERIAL_SAMSUNG_UARTS 0 >> #else >> -#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS >> +#define SERIAL_SAMSUNG_UARTS 4 >> #endif >> >> static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; >> diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c >> index 11fbbc2..6114942 100644 >> --- a/arch/arm/plat-samsung/init.c >> +++ b/arch/arm/plat-samsung/init.c >> @@ -92,10 +92,9 @@ void __init s3c24xx_init_clocks(int xtal) >> /* uart management */ >> #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) >> static int nr_uarts __initdata = 0; >> +#define MAX_UART_PORTS 4 >> >> -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS >> -static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; >> -#endif >> +static struct s3c2410_uartcfg uart_cfgs[MAX_UART_PORTS]; >> >> /* s3c24xx_init_uartdevs >> * >> @@ -110,7 +109,6 @@ void __init s3c24xx_init_uartdevs(char *name, >> struct s3c24xx_uart_resources *res, >> struct s3c2410_uartcfg *cfg, int no) >> { >> -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS >> struct platform_device *platdev; >> struct s3c2410_uartcfg *cfgptr = uart_cfgs; >> struct s3c24xx_uart_resources *resp; >> @@ -133,7 +131,6 @@ void __init s3c24xx_init_uartdevs(char *name, >> } >> >> nr_uarts = no; >> -#endif >> } >> >> void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) >> -- >> 1.7.9.5 >> -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c index ae4ea76..b20024e 100644 --- a/arch/arm/mach-s3c64xx/irq-pm.c +++ b/arch/arm/mach-s3c64xx/irq-pm.c @@ -55,10 +55,10 @@ static struct irq_grp_save { u32 mask; } eint_grp_save[5]; -#ifndef CONFIG_SERIAL_SAMSUNG_UARTS -#define SERIAL_SAMSUNG_UARTS 0 +#ifndef CONFIG_SERIAL_SAMSUNG +#define SERIAL_SAMSUNG_UARTS 0 #else -#define SERIAL_SAMSUNG_UARTS CONFIG_SERIAL_SAMSUNG_UARTS +#define SERIAL_SAMSUNG_UARTS 4 #endif static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c index 11fbbc2..6114942 100644 --- a/arch/arm/plat-samsung/init.c +++ b/arch/arm/plat-samsung/init.c @@ -92,10 +92,9 @@ void __init s3c24xx_init_clocks(int xtal) /* uart management */ #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS) static int nr_uarts __initdata = 0; +#define MAX_UART_PORTS 4 -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS -static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; -#endif +static struct s3c2410_uartcfg uart_cfgs[MAX_UART_PORTS]; /* s3c24xx_init_uartdevs * @@ -110,7 +109,6 @@ void __init s3c24xx_init_uartdevs(char *name, struct s3c24xx_uart_resources *res, struct s3c2410_uartcfg *cfg, int no) { -#ifdef CONFIG_SERIAL_SAMSUNG_UARTS struct platform_device *platdev; struct s3c2410_uartcfg *cfgptr = uart_cfgs; struct s3c24xx_uart_resources *resp; @@ -133,7 +131,6 @@ void __init s3c24xx_init_uartdevs(char *name, } nr_uarts = no; -#endif } void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)