| Message ID | 1414727409-6765-1-git-send-email-addy.ke@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Addy, On Thu, Oct 30, 2014 at 8:50 PM, Addy Ke <addy.ke@rock-chips.com> wrote: > +static int dw_mci_rk3288_parse_dt(struct dw_mci *host) > +{ > + struct device_node *np = host->dev->of_node; > + int sdio_id0; > + > + if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0", > + &sdio_id0)) > + host->sdio_id0 = sdio_id0; This function is only run on rk3288 and on all rk3288 SoCs this value is exactly 8. Just replace this with: /* SDIO IRQ shows up as if it were slot 8 on rk3288 SoCs */ host->sdio_id0 = 8; -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Addy. On 10/31/2014 12:50 PM, Addy Ke wrote: > The bit of sdio interrupt is 16 in designware implementation, > but it is 24 in RK3288. This patch add sdio_id0 for the number > of slot0 in the SDIO interrupt registers, which can be set in > platform DT table, such as: > - rockchip,sdio-interrupt-slot0 = <8>; I have a question. (It's not important question) You mentioned the sdio-irq bit used from 24 to 31, right? Then what interrupts are used from 16 to 23 at RK3288? Just reserved? Best Regards, Jaehoon Chung > > Signed-off-by: Addy Ke <addy.ke@rock-chips.com> > --- > Changes in v2: > - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next branch > > drivers/mmc/host/dw_mmc-rockchip.c | 13 +++++++++++++ > drivers/mmc/host/dw_mmc.c | 12 +++++++----- > drivers/mmc/host/dw_mmc.h | 2 ++ > include/linux/mmc/dw_mmc.h | 3 +++ > 4 files changed, 25 insertions(+), 5 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c > index bbb4ec3..1cb3bc6 100644 > --- a/drivers/mmc/host/dw_mmc-rockchip.c > +++ b/drivers/mmc/host/dw_mmc-rockchip.c > @@ -68,6 +68,18 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios) > } > } > > +static int dw_mci_rk3288_parse_dt(struct dw_mci *host) > +{ > + struct device_node *np = host->dev->of_node; > + int sdio_id0; > + > + if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0", > + &sdio_id0)) > + host->sdio_id0 = sdio_id0; > + > + return 0; > +} > + > static const struct dw_mci_drv_data rk2928_drv_data = { > .prepare_command = dw_mci_rockchip_prepare_command, > }; > @@ -76,6 +88,7 @@ static const struct dw_mci_drv_data rk3288_drv_data = { > .prepare_command = dw_mci_rockchip_prepare_command, > .set_ios = dw_mci_rk3288_set_ios, > .setup_clock = dw_mci_rk3288_setup_clock, > + .parse_dt = dw_mci_rk3288_parse_dt, > }; > > static const struct of_device_id dw_mci_rockchip_match[] = { > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index bb46b1b..a633b58 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) > > /* enable clock; only low power if no SDIO */ > clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; > - if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) > + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id))) > clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; > mci_writel(host, CLKENA, clk_en_a); > > @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) > dw_mci_disable_low_power(slot); > > mci_writel(host, INTMASK, > - (int_mask | SDMMC_INT_SDIO(slot->id))); > + (int_mask | SDMMC_INT_SDIO(slot->sdio_id))); > } else { > mci_writel(host, INTMASK, > - (int_mask & ~SDMMC_INT_SDIO(slot->id))); > + (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id))); > } > } > > @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) > /* Handle SDIO Interrupts */ > for (i = 0; i < host->num_slots; i++) { > struct dw_mci_slot *slot = host->slot[i]; > - if (pending & SDMMC_INT_SDIO(i)) { > - mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); > + if (pending & SDMMC_INT_SDIO(slot->sdio_id)) { > + mci_writel(host, RINTSTS, > + SDMMC_INT_SDIO(slot->sdio_id)); > mmc_signal_sdio_irq(slot->mmc); > } > } > @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) > > slot = mmc_priv(mmc); > slot->id = id; > + slot->sdio_id = host->sdio_id0 + id; > slot->mmc = mmc; > slot->host = host; > host->slot[id] = slot; > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 71d4995..0562f10 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host); > * with CONFIG_MMC_CLKGATE. > * @flags: Random state bits associated with the slot. > * @id: Number of this slot. > + * @sdio_id: Number of this slot in the SDIO interrupt registers. > */ > struct dw_mci_slot { > struct mmc_host *mmc; > @@ -233,6 +234,7 @@ struct dw_mci_slot { > #define DW_MMC_CARD_PRESENT 0 > #define DW_MMC_CARD_NEED_INIT 1 > int id; > + int sdio_id; > }; > > struct dw_mci_tuning_data { > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index 69d0814..72c319f 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -96,6 +96,7 @@ struct mmc_data; > * @quirks: Set of quirks that apply to specific versions of the IP. > * @irq_flags: The flags to be passed to request_irq. > * @irq: The irq value to be passed to request_irq. > + * @sdio_id0: Number of slot0 in the SDIO interrupt registers. > * > * Locking > * ======= > @@ -191,6 +192,8 @@ struct dw_mci { > bool vqmmc_enabled; > unsigned long irq_flags; /* IRQ flags */ > int irq; > + > + int sdio_id0; > }; > > /* DMA ops for Internal/External DMAC interface */ > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am Freitag, 31. Oktober 2014, 11:50:09 schrieb Addy Ke: > The bit of sdio interrupt is 16 in designware implementation, > but it is 24 in RK3288. This patch add sdio_id0 for the number > of slot0 in the SDIO interrupt registers, which can be set in > platform DT table, such as: > - rockchip,sdio-interrupt-slot0 = <8>; I just checked the manuals of rk3066 and rk3188 - and it seems the sdio interrupt is in bit 24 on all of them. Addy, could you check this and maybe enable this for all two variants we currently support? Thanks Heiko > > Signed-off-by: Addy Ke <addy.ke@rock-chips.com> > --- > Changes in v2: > - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next > branch > > drivers/mmc/host/dw_mmc-rockchip.c | 13 +++++++++++++ > drivers/mmc/host/dw_mmc.c | 12 +++++++----- > drivers/mmc/host/dw_mmc.h | 2 ++ > include/linux/mmc/dw_mmc.h | 3 +++ > 4 files changed, 25 insertions(+), 5 deletions(-) > > diff --git a/drivers/mmc/host/dw_mmc-rockchip.c > b/drivers/mmc/host/dw_mmc-rockchip.c index bbb4ec3..1cb3bc6 100644 > --- a/drivers/mmc/host/dw_mmc-rockchip.c > +++ b/drivers/mmc/host/dw_mmc-rockchip.c > @@ -68,6 +68,18 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, > struct mmc_ios *ios) } > } > > +static int dw_mci_rk3288_parse_dt(struct dw_mci *host) > +{ > + struct device_node *np = host->dev->of_node; > + int sdio_id0; > + > + if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0", > + &sdio_id0)) > + host->sdio_id0 = sdio_id0; > + > + return 0; > +} > + > static const struct dw_mci_drv_data rk2928_drv_data = { > .prepare_command = dw_mci_rockchip_prepare_command, > }; > @@ -76,6 +88,7 @@ static const struct dw_mci_drv_data rk3288_drv_data = { > .prepare_command = dw_mci_rockchip_prepare_command, > .set_ios = dw_mci_rk3288_set_ios, > .setup_clock = dw_mci_rk3288_setup_clock, > + .parse_dt = dw_mci_rk3288_parse_dt, > }; > > static const struct of_device_id dw_mci_rockchip_match[] = { > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index bb46b1b..a633b58 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, > bool force_clkinit) > > /* enable clock; only low power if no SDIO */ > clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; > - if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) > + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id))) > clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; > mci_writel(host, CLKENA, clk_en_a); > > @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host > *mmc, int enb) dw_mci_disable_low_power(slot); > > mci_writel(host, INTMASK, > - (int_mask | SDMMC_INT_SDIO(slot->id))); > + (int_mask | SDMMC_INT_SDIO(slot->sdio_id))); > } else { > mci_writel(host, INTMASK, > - (int_mask & ~SDMMC_INT_SDIO(slot->id))); > + (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id))); > } > } > > @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void > *dev_id) /* Handle SDIO Interrupts */ > for (i = 0; i < host->num_slots; i++) { > struct dw_mci_slot *slot = host->slot[i]; > - if (pending & SDMMC_INT_SDIO(i)) { > - mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); > + if (pending & SDMMC_INT_SDIO(slot->sdio_id)) { > + mci_writel(host, RINTSTS, > + SDMMC_INT_SDIO(slot->sdio_id)); > mmc_signal_sdio_irq(slot->mmc); > } > } > @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host, > unsigned int id) > > slot = mmc_priv(mmc); > slot->id = id; > + slot->sdio_id = host->sdio_id0 + id; > slot->mmc = mmc; > slot->host = host; > host->slot[id] = slot; > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 71d4995..0562f10 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host); > * with CONFIG_MMC_CLKGATE. > * @flags: Random state bits associated with the slot. > * @id: Number of this slot. > + * @sdio_id: Number of this slot in the SDIO interrupt registers. > */ > struct dw_mci_slot { > struct mmc_host *mmc; > @@ -233,6 +234,7 @@ struct dw_mci_slot { > #define DW_MMC_CARD_PRESENT 0 > #define DW_MMC_CARD_NEED_INIT 1 > int id; > + int sdio_id; > }; > > struct dw_mci_tuning_data { > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index 69d0814..72c319f 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -96,6 +96,7 @@ struct mmc_data; > * @quirks: Set of quirks that apply to specific versions of the IP. > * @irq_flags: The flags to be passed to request_irq. > * @irq: The irq value to be passed to request_irq. > + * @sdio_id0: Number of slot0 in the SDIO interrupt registers. > * > * Locking > * ======= > @@ -191,6 +192,8 @@ struct dw_mci { > bool vqmmc_enabled; > unsigned long irq_flags; /* IRQ flags */ > int irq; > + > + int sdio_id0; > }; > > /* DMA ops for Internal/External DMAC interface */ -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Jaehoon, On Fri, Oct 31, 2014 at 1:45 AM, Jaehoon Chung <jh80.chung@samsung.com> wrote: > Hi, Addy. > > On 10/31/2014 12:50 PM, Addy Ke wrote: >> The bit of sdio interrupt is 16 in designware implementation, >> but it is 24 in RK3288. This patch add sdio_id0 for the number >> of slot0 in the SDIO interrupt registers, which can be set in >> platform DT table, such as: >> - rockchip,sdio-interrupt-slot0 = <8>; > > I have a question. (It's not important question) > You mentioned the sdio-irq bit used from 24 to 31, right? > Then what interrupts are used from 16 to 23 at RK3288? Just reserved? In my TRM 16 shows as "data_nobusy". A quick search doesn't show any documentation for what this means. 17-23 and 25-31 are reserved. Note that (of course) there's no actual support for more than one slot on rk3288, so claiming that "24-31" is SDIO INT is a little silly, but I agree that it's probably is the best way to fit into the existing code until someone gets around to removing the whole multi-slot cruft. -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2014/10/31 18:43, Heiko Stübner wrote: > Am Freitag, 31. Oktober 2014, 11:50:09 schrieb Addy Ke: >> The bit of sdio interrupt is 16 in designware implementation, >> but it is 24 in RK3288. This patch add sdio_id0 for the number >> of slot0 in the SDIO interrupt registers, which can be set in >> platform DT table, such as: >> - rockchip,sdio-interrupt-slot0 = <8>; > > I just checked the manuals of rk3066 and rk3188 - and it seems the sdio > interrupt is in bit 24 on all of them. > > Addy, could you check this and maybe enable this for all two variants we > currently support? OK, I will do so in my next patch. thank you! > > > Thanks > Heiko > > >> >> Signed-off-by: Addy Ke <addy.ke@rock-chips.com> >> --- >> Changes in v2: >> - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next >> branch >> >> drivers/mmc/host/dw_mmc-rockchip.c | 13 +++++++++++++ >> drivers/mmc/host/dw_mmc.c | 12 +++++++----- >> drivers/mmc/host/dw_mmc.h | 2 ++ >> include/linux/mmc/dw_mmc.h | 3 +++ >> 4 files changed, 25 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/mmc/host/dw_mmc-rockchip.c >> b/drivers/mmc/host/dw_mmc-rockchip.c index bbb4ec3..1cb3bc6 100644 >> --- a/drivers/mmc/host/dw_mmc-rockchip.c >> +++ b/drivers/mmc/host/dw_mmc-rockchip.c >> @@ -68,6 +68,18 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, >> struct mmc_ios *ios) } >> } >> >> +static int dw_mci_rk3288_parse_dt(struct dw_mci *host) >> +{ >> + struct device_node *np = host->dev->of_node; >> + int sdio_id0; >> + >> + if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0", >> + &sdio_id0)) >> + host->sdio_id0 = sdio_id0; >> + >> + return 0; >> +} >> + >> static const struct dw_mci_drv_data rk2928_drv_data = { >> .prepare_command = dw_mci_rockchip_prepare_command, >> }; >> @@ -76,6 +88,7 @@ static const struct dw_mci_drv_data rk3288_drv_data = { >> .prepare_command = dw_mci_rockchip_prepare_command, >> .set_ios = dw_mci_rk3288_set_ios, >> .setup_clock = dw_mci_rk3288_setup_clock, >> + .parse_dt = dw_mci_rk3288_parse_dt, >> }; >> >> static const struct of_device_id dw_mci_rockchip_match[] = { >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index bb46b1b..a633b58 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, >> bool force_clkinit) >> >> /* enable clock; only low power if no SDIO */ >> clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; >> - if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) >> + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id))) >> clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; >> mci_writel(host, CLKENA, clk_en_a); >> >> @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host >> *mmc, int enb) dw_mci_disable_low_power(slot); >> >> mci_writel(host, INTMASK, >> - (int_mask | SDMMC_INT_SDIO(slot->id))); >> + (int_mask | SDMMC_INT_SDIO(slot->sdio_id))); >> } else { >> mci_writel(host, INTMASK, >> - (int_mask & ~SDMMC_INT_SDIO(slot->id))); >> + (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id))); >> } >> } >> >> @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void >> *dev_id) /* Handle SDIO Interrupts */ >> for (i = 0; i < host->num_slots; i++) { >> struct dw_mci_slot *slot = host->slot[i]; >> - if (pending & SDMMC_INT_SDIO(i)) { >> - mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); >> + if (pending & SDMMC_INT_SDIO(slot->sdio_id)) { >> + mci_writel(host, RINTSTS, >> + SDMMC_INT_SDIO(slot->sdio_id)); >> mmc_signal_sdio_irq(slot->mmc); >> } >> } >> @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host, >> unsigned int id) >> >> slot = mmc_priv(mmc); >> slot->id = id; >> + slot->sdio_id = host->sdio_id0 + id; >> slot->mmc = mmc; >> slot->host = host; >> host->slot[id] = slot; >> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h >> index 71d4995..0562f10 100644 >> --- a/drivers/mmc/host/dw_mmc.h >> +++ b/drivers/mmc/host/dw_mmc.h >> @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host); >> * with CONFIG_MMC_CLKGATE. >> * @flags: Random state bits associated with the slot. >> * @id: Number of this slot. >> + * @sdio_id: Number of this slot in the SDIO interrupt registers. >> */ >> struct dw_mci_slot { >> struct mmc_host *mmc; >> @@ -233,6 +234,7 @@ struct dw_mci_slot { >> #define DW_MMC_CARD_PRESENT 0 >> #define DW_MMC_CARD_NEED_INIT 1 >> int id; >> + int sdio_id; >> }; >> >> struct dw_mci_tuning_data { >> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h >> index 69d0814..72c319f 100644 >> --- a/include/linux/mmc/dw_mmc.h >> +++ b/include/linux/mmc/dw_mmc.h >> @@ -96,6 +96,7 @@ struct mmc_data; >> * @quirks: Set of quirks that apply to specific versions of the IP. >> * @irq_flags: The flags to be passed to request_irq. >> * @irq: The irq value to be passed to request_irq. >> + * @sdio_id0: Number of slot0 in the SDIO interrupt registers. >> * >> * Locking >> * ======= >> @@ -191,6 +192,8 @@ struct dw_mci { >> bool vqmmc_enabled; >> unsigned long irq_flags; /* IRQ flags */ >> int irq; >> + >> + int sdio_id0; >> }; >> >> /* DMA ops for Internal/External DMAC interface */ > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c index bbb4ec3..1cb3bc6 100644 --- a/drivers/mmc/host/dw_mmc-rockchip.c +++ b/drivers/mmc/host/dw_mmc-rockchip.c @@ -68,6 +68,18 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios) } } +static int dw_mci_rk3288_parse_dt(struct dw_mci *host) +{ + struct device_node *np = host->dev->of_node; + int sdio_id0; + + if (!of_property_read_u32(np, "rockchip,sdio-interrupt-slot0", + &sdio_id0)) + host->sdio_id0 = sdio_id0; + + return 0; +} + static const struct dw_mci_drv_data rk2928_drv_data = { .prepare_command = dw_mci_rockchip_prepare_command, }; @@ -76,6 +88,7 @@ static const struct dw_mci_drv_data rk3288_drv_data = { .prepare_command = dw_mci_rockchip_prepare_command, .set_ios = dw_mci_rk3288_set_ios, .setup_clock = dw_mci_rk3288_setup_clock, + .parse_dt = dw_mci_rk3288_parse_dt, }; static const struct of_device_id dw_mci_rockchip_match[] = { diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index bb46b1b..a633b58 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -823,7 +823,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit) /* enable clock; only low power if no SDIO */ clk_en_a = SDMMC_CLKEN_ENABLE << slot->id; - if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id))) + if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id))) clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id; mci_writel(host, CLKENA, clk_en_a); @@ -1184,10 +1184,10 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb) dw_mci_disable_low_power(slot); mci_writel(host, INTMASK, - (int_mask | SDMMC_INT_SDIO(slot->id))); + (int_mask | SDMMC_INT_SDIO(slot->sdio_id))); } else { mci_writel(host, INTMASK, - (int_mask & ~SDMMC_INT_SDIO(slot->id))); + (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id))); } } @@ -2056,8 +2056,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) /* Handle SDIO Interrupts */ for (i = 0; i < host->num_slots; i++) { struct dw_mci_slot *slot = host->slot[i]; - if (pending & SDMMC_INT_SDIO(i)) { - mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i)); + if (pending & SDMMC_INT_SDIO(slot->sdio_id)) { + mci_writel(host, RINTSTS, + SDMMC_INT_SDIO(slot->sdio_id)); mmc_signal_sdio_irq(slot->mmc); } } @@ -2145,6 +2146,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) slot = mmc_priv(mmc); slot->id = id; + slot->sdio_id = host->sdio_id0 + id; slot->mmc = mmc; slot->host = host; host->slot[id] = slot; diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 71d4995..0562f10 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -214,6 +214,7 @@ extern int dw_mci_resume(struct dw_mci *host); * with CONFIG_MMC_CLKGATE. * @flags: Random state bits associated with the slot. * @id: Number of this slot. + * @sdio_id: Number of this slot in the SDIO interrupt registers. */ struct dw_mci_slot { struct mmc_host *mmc; @@ -233,6 +234,7 @@ struct dw_mci_slot { #define DW_MMC_CARD_PRESENT 0 #define DW_MMC_CARD_NEED_INIT 1 int id; + int sdio_id; }; struct dw_mci_tuning_data { diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 69d0814..72c319f 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -96,6 +96,7 @@ struct mmc_data; * @quirks: Set of quirks that apply to specific versions of the IP. * @irq_flags: The flags to be passed to request_irq. * @irq: The irq value to be passed to request_irq. + * @sdio_id0: Number of slot0 in the SDIO interrupt registers. * * Locking * ======= @@ -191,6 +192,8 @@ struct dw_mci { bool vqmmc_enabled; unsigned long irq_flags; /* IRQ flags */ int irq; + + int sdio_id0; }; /* DMA ops for Internal/External DMAC interface */
The bit of sdio interrupt is 16 in designware implementation, but it is 24 in RK3288. This patch add sdio_id0 for the number of slot0 in the SDIO interrupt registers, which can be set in platform DT table, such as: - rockchip,sdio-interrupt-slot0 = <8>; Signed-off-by: Addy Ke <addy.ke@rock-chips.com> --- Changes in v2: - rebase on http://git.linaro.org/git/people/ulf.hansson/mmc.git, next branch drivers/mmc/host/dw_mmc-rockchip.c | 13 +++++++++++++ drivers/mmc/host/dw_mmc.c | 12 +++++++----- drivers/mmc/host/dw_mmc.h | 2 ++ include/linux/mmc/dw_mmc.h | 3 +++ 4 files changed, 25 insertions(+), 5 deletions(-)