@@ -294,7 +294,16 @@ static void swap_buffer(void *bufaddr, int len)
for (i = 0; i < len; i += 4, buf++)
swab32s(buf);
+}
+
+static void swap_buffer2(void *dst_buf, void *src_buf, int len)
+{
+ int i;
+ unsigned int *src = src_buf;
+ unsigned int *dst = dst_buf;
+ for (i = 0; i < len; i += 4, src++, dst++)
+ *dst = swab32p(src);
}
static void fec_dump(struct net_device *ndev)
@@ -1292,7 +1301,7 @@ fec_enet_new_rxbdp(struct net_device *ndev, struct bufdesc *bdp, struct sk_buff
}
static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
- struct bufdesc *bdp, u32 length)
+ struct bufdesc *bdp, u32 length, bool swap)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct sk_buff *new_skb;
@@ -1307,7 +1316,10 @@ static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
FEC_ENET_RX_FRSIZE - fep->rx_align,
DMA_FROM_DEVICE);
- memcpy(new_skb->data, (*skb)->data, length);
+ if (!swap)
+ memcpy(new_skb->data, (*skb)->data, length);
+ else
+ swap_buffer2(new_skb->data, (*skb)->data, length);
*skb = new_skb;
return true;
@@ -1335,6 +1347,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
u16 vlan_tag;
int index = 0;
bool is_copybreak;
+ bool need_swap = fep->quirks & FEC_QUIRK_SWAP_FRAME;
#ifdef CONFIG_M532x
flush_cache_all();
@@ -1398,7 +1411,8 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
* include that when passing upstream as it messes up
* bridging applications.
*/
- is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4);
+ is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4,
+ need_swap);
if (!is_copybreak) {
skb_new = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
if (unlikely(!skb_new)) {
@@ -1413,7 +1427,7 @@ fec_enet_rx_queue(struct net_device *ndev, int budget, u16 queue_id)
prefetch(skb->data - NET_IP_ALIGN);
skb_put(skb, pkt_len - 4);
data = skb->data;
- if (fep->quirks & FEC_QUIRK_SWAP_FRAME)
+ if (!is_copybreak && need_swap)
swap_buffer(data, pkt_len);
/* Extract the enhanced buffer descriptor */
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") introduced a regression for i.MX28. The swap_buffer() function doing the endian conversion of the received data on i.MX28 may access memory beyond the actual packet size in the DMA buffer. fec_enet_copybreak() does not copy those bytes, so that the last bytes of a packet may be filled with invalid data after swapping. This will likely lead to checksum errors on received packets. E.g. when trying to mount an NFS rootfs: UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36 Do the byte swapping and copying to the new skb in one go if necessary. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> --- drivers/net/ethernet/freescale/fec_main.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)