diff mbox

ARM: dts: zynq: Enable PL clocks for Parallella

Message ID 1415294531-8942-1-git-send-email-afaerber@suse.de (mailing list archive)
State New, archived
Headers show

Commit Message

Andreas Färber Nov. 6, 2014, 5:22 p.m. UTC
The Parallella board comes with a U-Boot bootloader that loads one of
two predefined FPGA bitstreams before booting the kernel. Both define an
AXI interface to the on-board Epiphany processor.

Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.

Otherwise accessing, e.g., the ESYSRESET register freezes the board,
as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.

Cc: <stable@vger.kernel.org> # 3.17.x
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 Michal/Olof, please consider this trivial patch as a fix for 3.18.

 arch/arm/boot/dts/zynq-parallella.dts | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Soren Brinkmann Nov. 6, 2014, 5:33 p.m. UTC | #1
Hi Andreas,

On Thu, 2014-11-06 at 06:22PM +0100, Andreas Färber wrote:
> The Parallella board comes with a U-Boot bootloader that loads one of
> two predefined FPGA bitstreams before booting the kernel. Both define an
> AXI interface to the on-board Epiphany processor.
> 
> Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
> 
> Otherwise accessing, e.g., the ESYSRESET register freezes the board,
> as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.

Yeah, this is the problem. Bypassing the kernel banging on memory
directly through /dev/mem does not leave any chance of enabling clocks on
demand through the proper interfaces.

Though, this is a valid workaround for the immediate problem, longer
term, you should consider adding some kind of proper kernel driver for
this interface that would then use the clock framework to control the
required clocks dynamically.

	Sören
Andreas Färber Nov. 6, 2014, 6:34 p.m. UTC | #2
Hi Sören,

Am 06.11.2014 um 18:33 schrieb Sören Brinkmann:
> On Thu, 2014-11-06 at 06:22PM +0100, Andreas Färber wrote:
>> The Parallella board comes with a U-Boot bootloader that loads one of
>> two predefined FPGA bitstreams before booting the kernel. Both define an
>> AXI interface to the on-board Epiphany processor.
>>
>> Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
>>
>> Otherwise accessing, e.g., the ESYSRESET register freezes the board,
>> as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
> 
> Yeah, this is the problem. Bypassing the kernel banging on memory
> directly through /dev/mem does not leave any chance of enabling clocks on
> demand through the proper interfaces.
> 
> Though, this is a valid workaround for the immediate problem, longer
> term, you should consider adding some kind of proper kernel driver for
> this interface that would then use the clock framework to control the
> required clocks dynamically.

Yes, Adapteva has a new char driver, and I have a proof-of-concept
platform driver on the branch I mentioned (where I had experimented with
enabling the wrong clock: adi,axi-clkgen-2.00a).
https://github.com/afaerber/linux/commits/parallella-next

But as there is no such driver in 3.17 or 3.18, I consider this patch
the right short-term fix according to your earlier message.

Apart from fixing functionality for users, it buys us more time to find
a consensus on how the kernel driver(s) should actually look like. ;)
My goal is having the DT describe the chip rather than some userspace
text/XML file and to have all chip-specific quirks in the driver.
I've been reading up on remoteproc, but it doesn't quite seem to match
the deployment model for Epiphany AFAICT.

Also, as discussed during the initial submission, we'll need to split
and reorganize the .dts file once we start adding nodes beyond the
common Epiphany IP.

Regards,
Andreas
Michal Simek Nov. 7, 2014, 6:44 a.m. UTC | #3
On 11/06/2014 06:22 PM, Andreas Färber wrote:
> The Parallella board comes with a U-Boot bootloader that loads one of
> two predefined FPGA bitstreams before booting the kernel. Both define an
> AXI interface to the on-board Epiphany processor.
> 
> Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
> 
> Otherwise accessing, e.g., the ESYSRESET register freezes the board,
> as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
> 
> Cc: <stable@vger.kernel.org> # 3.17.x
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
>  Michal/Olof, please consider this trivial patch as a fix for 3.18.

Acked-by: Michal Simek <michal.simek@xilinx.com>

Olof, Arnd: Can you please pick this directly?

Thanks,
Michal
Olof Johansson Nov. 9, 2014, 12:58 a.m. UTC | #4
On Fri, Nov 07, 2014 at 07:44:16AM +0100, Michal Simek wrote:
> On 11/06/2014 06:22 PM, Andreas Färber wrote:
> > The Parallella board comes with a U-Boot bootloader that loads one of
> > two predefined FPGA bitstreams before booting the kernel. Both define an
> > AXI interface to the on-board Epiphany processor.
> > 
> > Enable clocks FCLK0..FCLK3 for the Programmable Logic by default.
> > 
> > Otherwise accessing, e.g., the ESYSRESET register freezes the board,
> > as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem.
> > 
> > Cc: <stable@vger.kernel.org> # 3.17.x
> > Signed-off-by: Andreas Färber <afaerber@suse.de>
> > ---
> >  Michal/Olof, please consider this trivial patch as a fix for 3.18.
> 
> Acked-by: Michal Simek <michal.simek@xilinx.com>
> 
> Olof, Arnd: Can you please pick this directly?

Done, applied to fixes.


-Olof
diff mbox

Patch

diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index e1f51ca127fe..0429bbd89fba 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,6 +34,10 @@ 
 	};
 };
 
+&clkc {
+	fclk-enable = <0xf>;
+};
+
 &gem0 {
 	status = "okay";
 	phy-mode = "rgmii-id";