diff mbox

ARM: dts: Fix booting on Rinato market device

Message ID 1415360662-30390-1-git-send-email-k.kozlowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski Nov. 7, 2014, 11:44 a.m. UTC
The bootloader on market Rinato (Gear 2) device checks for revision in
compatible field of DTB. If it is not present or lower than required
then booting fails with: "Could not do normal boot. (no DTB found)".

Log of bootloader in case of failure:
h/w: revision  = 0x06
h/w: schematic = SM-R380_Rev0.5_Final_0205
date = 2000/01/01 12:00:21 (UTC)
cmu_div:4, div:5, src_clk:800000000, pixel_clk:31860720
load_kernel: loading boot image from 57344.. (BOOT)
load_kernel: found zImage, size: 0x3267e8
0xbc Error!
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
load_kernel: found custom kernel (ret:-2147483647)
 No need to update kernel type.
Detected board: samsung,rinato-rev06
Could not do normal boot. (no DTB found)
: Entering usb mode for SM-R380_EUR_XX (65535)..

Add a "rev06" suffix to compatible to satisfy the bootloader.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Chanwoo Choi Nov. 7, 2014, 11:50 a.m. UTC | #1
Hi Krzysztof,

On 11/07/2014 08:44 PM, Krzysztof Kozlowski wrote:
> The bootloader on market Rinato (Gear 2) device checks for revision in
> compatible field of DTB. If it is not present or lower than required
> then booting fails with: "Could not do normal boot. (no DTB found)".
> 
> Log of bootloader in case of failure:
> h/w: revision  = 0x06
> h/w: schematic = SM-R380_Rev0.5_Final_0205
> date = 2000/01/01 12:00:21 (UTC)
> cmu_div:4, div:5, src_clk:800000000, pixel_clk:31860720
> load_kernel: loading boot image from 57344.. (BOOT)
> load_kernel: found zImage, size: 0x3267e8
> 0xbc Error!
> Verify_Binary_Signature: failed.
> pit_check_signature (BOOT) invalid.
> load_kernel: found custom kernel (ret:-2147483647)
>  No need to update kernel type.
> Detected board: samsung,rinato-rev06
> Could not do normal boot. (no DTB found)
> : Entering usb mode for SM-R380_EUR_XX (65535)..
> 
> Add a "rev06" suffix to compatible to satisfy the bootloader.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> index 84380fa13e37..f72ba0a1d915 100644
> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> @@ -18,7 +18,8 @@
>  
>  / {
>  	model = "Samsung Rinato board";
> -	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
> +	compatible = "samsung,rinato", "samsung,rinato-rev06",
> +			"samsung,exynos3250", "samsung,exynos3";

I think it is wrong. The released bootloader from Samsung is not u-boot.
Instead, you have to update u-boot to support Exynos3250-basd Rinato board.

Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski Nov. 7, 2014, 11:59 a.m. UTC | #2
On pi?, 2014-11-07 at 20:50 +0900, Chanwoo Choi wrote:
> Hi Krzysztof,
> 
> On 11/07/2014 08:44 PM, Krzysztof Kozlowski wrote:
> > The bootloader on market Rinato (Gear 2) device checks for revision in
> > compatible field of DTB. If it is not present or lower than required
> > then booting fails with: "Could not do normal boot. (no DTB found)".
> > 
> > Log of bootloader in case of failure:
> > h/w: revision  = 0x06
> > h/w: schematic = SM-R380_Rev0.5_Final_0205
> > date = 2000/01/01 12:00:21 (UTC)
> > cmu_div:4, div:5, src_clk:800000000, pixel_clk:31860720
> > load_kernel: loading boot image from 57344.. (BOOT)
> > load_kernel: found zImage, size: 0x3267e8
> > 0xbc Error!
> > Verify_Binary_Signature: failed.
> > pit_check_signature (BOOT) invalid.
> > load_kernel: found custom kernel (ret:-2147483647)
> >  No need to update kernel type.
> > Detected board: samsung,rinato-rev06
> > Could not do normal boot. (no DTB found)
> > : Entering usb mode for SM-R380_EUR_XX (65535)..
> > 
> > Add a "rev06" suffix to compatible to satisfy the bootloader.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> > index 84380fa13e37..f72ba0a1d915 100644
> > --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> > +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> > @@ -18,7 +18,8 @@
> >  
> >  / {
> >  	model = "Samsung Rinato board";
> > -	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
> > +	compatible = "samsung,rinato", "samsung,rinato-rev06",
> > +			"samsung,exynos3250", "samsung,exynos3";
> 
> I think it is wrong. The released bootloader from Samsung is not u-boot.
> Instead, you have to update u-boot to support Exynos3250-basd Rinato board.

The bootloader on device also was not a u-boot. So the fix is for native
bootloader delivered on device.

I do not insist that this is proper fix. It was just needed to boot the
device with custom kernel.

Anyway, thanks for comments!

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
kgene@kernel.org Nov. 8, 2014, 10:16 a.m. UTC | #3
Krzysztof Kozlowski wrote:
> 
> On pi?, 2014-11-07 at 20:50 +0900, Chanwoo Choi wrote:
> > Hi Krzysztof,
> >
> > On 11/07/2014 08:44 PM, Krzysztof Kozlowski wrote:
> > > The bootloader on market Rinato (Gear 2) device checks for revision in
> > > compatible field of DTB. If it is not present or lower than required
> > > then booting fails with: "Could not do normal boot. (no DTB found)".
> > >
> > > Log of bootloader in case of failure:
> > > h/w: revision  = 0x06
> > > h/w: schematic = SM-R380_Rev0.5_Final_0205
> > > date = 2000/01/01 12:00:21 (UTC)
> > > cmu_div:4, div:5, src_clk:800000000, pixel_clk:31860720
> > > load_kernel: loading boot image from 57344.. (BOOT)
> > > load_kernel: found zImage, size: 0x3267e8
> > > 0xbc Error!
> > > Verify_Binary_Signature: failed.
> > > pit_check_signature (BOOT) invalid.
> > > load_kernel: found custom kernel (ret:-2147483647)
> > >  No need to update kernel type.
> > > Detected board: samsung,rinato-rev06
> > > Could not do normal boot. (no DTB found)
> > > : Entering usb mode for SM-R380_EUR_XX (65535)..
> > >
> > > Add a "rev06" suffix to compatible to satisfy the bootloader.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > > ---
> > >  arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
> > > index 84380fa13e37..f72ba0a1d915 100644
> > > --- a/arch/arm/boot/dts/exynos3250-rinato.dts
> > > +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
> > > @@ -18,7 +18,8 @@
> > >
> > >  / {
> > >  	model = "Samsung Rinato board";
> > > -	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
> > > +	compatible = "samsung,rinato", "samsung,rinato-rev06",
> > > +			"samsung,exynos3250", "samsung,exynos3";
> >
> > I think it is wrong. The released bootloader from Samsung is not u-boot.
> > Instead, you have to update u-boot to support Exynos3250-basd Rinato board.
> 
> The bootloader on device also was not a u-boot. So the fix is for native
> bootloader delivered on device.
> 
> I do not insist that this is proper fix. It was just needed to boot the
> device with custom kernel.
> 
> Anyway, thanks for comments!
> 
Hi Krzysztof and Chanwoo,

So, we don’t need this to fix the problem Krzysztof said? OK.

- Kukjin

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Chanwoo Choi Nov. 10, 2014, 1:03 a.m. UTC | #4
Dear Kukjin,

On 11/08/2014 07:16 PM, Kukjin Kim wrote:
> Krzysztof Kozlowski wrote:
>>
>> On pi?, 2014-11-07 at 20:50 +0900, Chanwoo Choi wrote:
>>> Hi Krzysztof,
>>>
>>> On 11/07/2014 08:44 PM, Krzysztof Kozlowski wrote:
>>>> The bootloader on market Rinato (Gear 2) device checks for revision in
>>>> compatible field of DTB. If it is not present or lower than required
>>>> then booting fails with: "Could not do normal boot. (no DTB found)".
>>>>
>>>> Log of bootloader in case of failure:
>>>> h/w: revision  = 0x06
>>>> h/w: schematic = SM-R380_Rev0.5_Final_0205
>>>> date = 2000/01/01 12:00:21 (UTC)
>>>> cmu_div:4, div:5, src_clk:800000000, pixel_clk:31860720
>>>> load_kernel: loading boot image from 57344.. (BOOT)
>>>> load_kernel: found zImage, size: 0x3267e8
>>>> 0xbc Error!
>>>> Verify_Binary_Signature: failed.
>>>> pit_check_signature (BOOT) invalid.
>>>> load_kernel: found custom kernel (ret:-2147483647)
>>>>  No need to update kernel type.
>>>> Detected board: samsung,rinato-rev06
>>>> Could not do normal boot. (no DTB found)
>>>> : Entering usb mode for SM-R380_EUR_XX (65535)..
>>>>
>>>> Add a "rev06" suffix to compatible to satisfy the bootloader.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>>>> ---
>>>>  arch/arm/boot/dts/exynos3250-rinato.dts | 3 ++-
>>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
>>>> index 84380fa13e37..f72ba0a1d915 100644
>>>> --- a/arch/arm/boot/dts/exynos3250-rinato.dts
>>>> +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
>>>> @@ -18,7 +18,8 @@
>>>>
>>>>  / {
>>>>  	model = "Samsung Rinato board";
>>>> -	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
>>>> +	compatible = "samsung,rinato", "samsung,rinato-rev06",
>>>> +			"samsung,exynos3250", "samsung,exynos3";
>>>
>>> I think it is wrong. The released bootloader from Samsung is not u-boot.
>>> Instead, you have to update u-boot to support Exynos3250-basd Rinato board.
>>
>> The bootloader on device also was not a u-boot. So the fix is for native
>> bootloader delivered on device.
>>
>> I do not insist that this is proper fix. It was just needed to boot the
>> device with custom kernel.
>>
>> Anyway, thanks for comments!
>>
> Hi Krzysztof and Chanwoo,
> 
> So, we don’t need this to fix the problem Krzysztof said? OK.

Yes.
The released bootloader from Samsung is not general and not opened.
We have to support Exynos3250-based Rinato on general bootloader.

Beset Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 84380fa13e37..f72ba0a1d915 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -18,7 +18,8 @@ 
 
 / {
 	model = "Samsung Rinato board";
-	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+	compatible = "samsung,rinato", "samsung,rinato-rev06",
+			"samsung,exynos3250", "samsung,exynos3";
 
 	aliases {
 		i2c7 = &i2c_max77836;