diff mbox

[v3] input/keyboard: new OpenCores Keyboard Controller driver

Message ID 20090915055224.GD1132@core.coreip.homeip.net (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Dmitry Torokhov Sept. 15, 2009, 5:52 a.m. UTC
On Mon, Sep 14, 2009 at 08:18:48PM +0200, Javier Herrero wrote:
> Hello,
>
> It has a bit long since last time I touched the driver, so I should also  
> try to refresh my memory about it :). I suppose that you're right in the  
> double allocation issue (I took another keyboard driver as a starting  
> point and probably the double allocation was already there...), so feel  
> free to introduce the change and I will test it as soon as I can.
>
> About the exact scancode - key mapping, the reason is that since the  
> FPGA opencores device already implements a translation table, I found  
> that another translation table sounded a bit redundant.
>

OK, below is what I have now... One concern though - don't we need to do
request_mem_region/ioremap for the addr_res?

Comments

Mike Frysinger Sept. 15, 2009, 11:16 a.m. UTC | #1
On Tue, Sep 15, 2009 at 01:52, Dmitry Torokhov wrote:
> On Mon, Sep 14, 2009 at 08:18:48PM +0200, Javier Herrero wrote:
>> It has a bit long since last time I touched the driver, so I should also
>> try to refresh my memory about it :). I suppose that you're right in the
>> double allocation issue (I took another keyboard driver as a starting
>> point and probably the double allocation was already there...), so feel
>> free to introduce the change and I will test it as soon as I can.
>>
>> About the exact scancode - key mapping, the reason is that since the
>> FPGA opencores device already implements a translation table, I found
>> that another translation table sounded a bit redundant.
>
> OK, below is what I have now... One concern though - don't we need to do
> request_mem_region/ioremap for the addr_res?

i think so ... these operations are nops on a Blackfin CPU which is
probably why it "just works".

> +struct opencores_kbd {
> +       struct input_dev *input;
> +       void __iomem *addr;
> +       int irq;
> +       struct resource *irq_res;

the irq_res member is no longer needed

+#define NUM_KEYS 128
> +       unsigned short keycodes[NUM_KEYS];

since this is the only usage of NUM_KEYS, could just inline it now ...

> +       error = request_irq(irq, &opencores_kbd_isr,
> +                           IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
> +       if (error) {
> +               dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
> +               goto err_free_mem;
> +       }
> +
> +       error = input_register_device(input);
> +       if (error) {
> +               dev_err(&pdev->dev, "unable to register input device\n");
> +               goto err_free_irq;
> +       }

the input layer can handle input even if it's not registered ?
-mike
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dmitry Torokhov Sept. 15, 2009, 4:23 p.m. UTC | #2
On Tue, Sep 15, 2009 at 07:16:25AM -0400, Mike Frysinger wrote:
> On Tue, Sep 15, 2009 at 01:52, Dmitry Torokhov wrote:
> > On Mon, Sep 14, 2009 at 08:18:48PM +0200, Javier Herrero wrote:
> >> It has a bit long since last time I touched the driver, so I should also
> >> try to refresh my memory about it :). I suppose that you're right in the
> >> double allocation issue (I took another keyboard driver as a starting
> >> point and probably the double allocation was already there...), so feel
> >> free to introduce the change and I will test it as soon as I can.
> >>
> >> About the exact scancode - key mapping, the reason is that since the
> >> FPGA opencores device already implements a translation table, I found
> >> that another translation table sounded a bit redundant.
> >
> > OK, below is what I have now... One concern though - don't we need to do
> > request_mem_region/ioremap for the addr_res?
> 
> i think so ... these operations are nops on a Blackfin CPU which is
> probably why it "just works".
> 

Surely request_mem_region is not a nop? I think even if uoremap is a nop
we need to convert the driver since it does not have to be on a
Blackfin, does it?

> > +struct opencores_kbd {
> > +       struct input_dev *input;
> > +       void __iomem *addr;
> > +       int irq;
> > +       struct resource *irq_res;
> 
> the irq_res member is no longer needed
> 
> +#define NUM_KEYS 128
> > +       unsigned short keycodes[NUM_KEYS];
> 
> since this is the only usage of NUM_KEYS, could just inline it now ...
> 
> > +       error = request_irq(irq, &opencores_kbd_isr,
> > +                           IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
> > +       if (error) {
> > +               dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
> > +               goto err_free_mem;
> > +       }
> > +
> > +       error = input_register_device(input);
> > +       if (error) {
> > +               dev_err(&pdev->dev, "unable to register input device\n");
> > +               goto err_free_irq;
> > +       }
> 
> the input layer can handle input even if it's not registered ?

The device can survive input events as soon as it was allocated with
input_allocate_device() but of course the event will not get anywhere.
This is a property that I intend to keep since it is very convenient.
Mike Frysinger Sept. 15, 2009, 4:39 p.m. UTC | #3
On Tue, Sep 15, 2009 at 12:23, Dmitry Torokhov wrote:
> On Tue, Sep 15, 2009 at 07:16:25AM -0400, Mike Frysinger wrote:
>> On Tue, Sep 15, 2009 at 01:52, Dmitry Torokhov wrote:
>> > OK, below is what I have now... One concern though - don't we need to do
>> > request_mem_region/ioremap for the addr_res?
>>
>> i think so ... these operations are nops on a Blackfin CPU which is
>> probably why it "just works".
>
> Surely request_mem_region is not a nop? I think even if uoremap is a nop
> we need to convert the driver since it does not have to be on a
> Blackfin, does it?

i wasnt suggesting we not add these calls.  i was just stating why
they hadnt already been added -- things work fine on a Blackfin system
w/out ioremap calls because we're a no-mmu system.

>> the input layer can handle input even if it's not registered ?
>
> The device can survive input events as soon as it was allocated with
> input_allocate_device() but of course the event will not get anywhere.
> This is a property that I intend to keep since it is very convenient.

that's fine, i was just curious
-mike
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 3525c19..e363077 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -311,6 +311,15 @@  config KEYBOARD_SUNKBD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sunkbd.
 
+config KEYBOARD_OPENCORES
+	tristate "OpenCores Keyboard Controller"
+	help
+	  Say Y here if you want to use the OpenCores Keyboard Controller
+	  http://www.opencores.org/project,keyboardcontroller
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called opencores-kbd.
+
 config KEYBOARD_SH_KEYSC
 	tristate "SuperH KEYSC keypad support"
 	depends on SUPERH
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 8a7a22b..ab35ac3 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -23,6 +23,7 @@  obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c
new file mode 100644
index 0000000..1bff086
--- /dev/null
+++ b/drivers/input/keyboard/opencores-kbd.c
@@ -0,0 +1,162 @@ 
+/*
+ * OpenCores Keyboard Controller Driver
+ * http://www.opencores.org/project,keyboardcontroller
+ *
+ * Copyright 2007-2009 HV Sistemas S.L.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define NUM_KEYS 128
+
+struct opencores_kbd {
+	struct input_dev *input;
+	void __iomem *addr;
+	int irq;
+	struct resource *irq_res;
+	unsigned short keycodes[NUM_KEYS];
+};
+
+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+	struct opencores_kbd *opencores_kbd = dev_id;
+	struct input_dev *input = opencores_kbd->input;
+	unsigned char c;
+
+	c = readb(opencores_kbd->addr);
+	input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit opencores_kbd_probe(struct platform_device *pdev)
+{
+	struct input_dev *input;
+	struct opencores_kbd *opencores_kbd;
+	struct resource *addr_res;
+	int irq;
+	int i, error;
+
+	addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!addr_res) {
+		dev_err(&pdev->dev, "missing board memory resource\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing board IRQ resource\n");
+		return -EINVAL;
+	}
+
+	opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!opencores_kbd || !input) {
+		dev_err(&pdev->dev, "failed to allocate device structures\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	opencores_kbd->input = input;
+	opencores_kbd->addr = (void __force __iomem *)addr_res->start;
+	opencores_kbd->irq = irq;
+
+	input->name = pdev->name;
+	input->phys = "opencores-kbd/input0";
+	input->dev.parent = &pdev->dev;
+
+	input_set_drvdata(input, opencores_kbd);
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->keycode = opencores_kbd->keycodes;
+	input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
+		/*
+		 * OpenCores controller happens to have scancodes match
+		 * our KEY_* definitions.
+		 */
+		opencores_kbd->keycodes[i] = i;
+		__set_bit(opencores_kbd->keycodes[i], input->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	error = request_irq(irq, &opencores_kbd_isr,
+			    IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
+	if (error) {
+		dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, opencores_kbd);
+
+	return 0;
+
+ err_free_irq:
+	free_irq(irq, opencores_kbd);
+ err_free_mem:
+	input_free_device(input);
+	kfree(opencores_kbd);
+
+	return error;
+}
+
+static int __devexit opencores_kbd_remove(struct platform_device *pdev)
+{
+	struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev);
+
+	free_irq(opencores_kbd->irq, opencores_kbd);
+
+	input_unregister_device(opencores_kbd->input);
+	kfree(opencores_kbd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver opencores_kbd_device_driver = {
+	.probe    = opencores_kbd_probe,
+	.remove   = __devexit_p(opencores_kbd_remove),
+	.driver   = {
+		.name = KBUILD_MODNAME,
+	},
+};
+
+static int __init opencores_kbd_init(void)
+{
+	return platform_driver_register(&opencores_kbd_device_driver);
+}
+module_init(opencores_kbd_init);
+
+static void __exit opencores_kbd_exit(void)
+{
+	platform_driver_unregister(&opencores_kbd_device_driver);
+}
+module_exit(opencores_kbd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
+MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller");