| Message ID | 1415994379-29165-1-git-send-email-sjoerd.simons@collabora.co.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Sjoerd, On Fri, Nov 14, 2014 at 8:46 PM, Sjoerd Simons <sjoerd.simons@collabora.co.uk> wrote: > Explicitly set the dr_mode for the dwc3 controller on the > Snow board to host mode. This is required to ensure the > controller is initialized in the right mode if the kernel is > build with USB gadget support. The patch looks good to me. Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Kukjin, I think $subject is -rc material since this issue is seen after commit 508423b ("ARM: exynos_defconfig: enable USB gadget support") which landed in 3.18. Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Javier Martinez Canillas wrote: > > Hello Sjoerd, > Hi, > On Fri, Nov 14, 2014 at 8:46 PM, Sjoerd Simons > <sjoerd.simons@collabora.co.uk> wrote: > > Explicitly set the dr_mode for the dwc3 controller on the > > Snow board to host mode. This is required to ensure the > > controller is initialized in the right mode if the kernel is > > build with USB gadget support. > > The patch looks good to me. > > Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > > Kukjin, > > I think $subject is -rc material since this issue is seen after commit > 508423b ("ARM: exynos_defconfig: enable USB gadget support") which > landed in 3.18. > Yeah, you're right. I'll queue this into -fixes for 3.18. Thanks, Kukjin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index e51fcef..60429ad 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -624,4 +624,8 @@ num-cs = <1>; }; +&usbdrd_dwc3 { + dr_mode = "host"; +}; + #include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index f21b9aa..d55c1a2 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -555,7 +555,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3: dwc3 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>;
Explicitly set the dr_mode for the dwc3 controller on the Snow board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> --- arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++ arch/arm/boot/dts/exynos5250.dtsi | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)