| Message ID | 1416384447-29391-1-git-send-email-jay.xu@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Nov 19, 2014 at 04:07:27PM +0800, Jianqun Xu wrote: > Add an property "i2s_clk_out", which enables to output clock to outside > of rockchip SoCs. Let's make it optional since not each board needs it. Don't send new patches as individual followups to patches in the series, repost the series. It becomes very difficult to follow what the current series is (which is the latest version of everything, what ordering, is everything still in the current version of the series).
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..6dedd0d 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -22,6 +22,10 @@ Required properties: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +Optional property: + - "i2s_clk_out" : clock output to outside of chip, usally as master clock for audio + codec chip + Example for rk3288 I2S controller: i2s@ff890000 { @@ -32,6 +36,6 @@ i2s@ff890000 { #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_CLKOUT>; };
Add an property "i2s_clk_out", which enables to output clock to outside of rockchip SoCs. Let's make it optional since not each board needs it. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> --- changes since v1: - make "i2s_clk_out" optional, suggested by Sonny Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)