| Message ID | 1416512485-7292-4-git-send-email-joshc@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Nov 20, 2014 at 01:41:25PM -0600, Josh Cartwright wrote: > The IPQ8064 reference boards make use of SMB208 regulators which are > controlled by RPM. Implement support for these regulators in the RPM > regulator driver. I'm missing both patches 1-3 and the cover letter, what's the story with the series - are there interdependencies?
On Fri, Nov 21, 2014 at 10:13 AM, Mark Brown <broonie@kernel.org> wrote: > On Thu, Nov 20, 2014 at 01:41:25PM -0600, Josh Cartwright wrote: >> The IPQ8064 reference boards make use of SMB208 regulators which are >> controlled by RPM. Implement support for these regulators in the RPM >> regulator driver. > > I'm missing both patches 1-3 and the cover letter, what's the story > with the series - are there interdependencies? Hi Mark, There are no new dependencies introduced here, patch 1 and 2 are DT and mfd additions. So you can apply this patch independently in your tree. Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Regards, Bjorn
On Thu, Nov 20, 2014 at 01:41:25PM -0600, Josh Cartwright wrote: > The IPQ8064 reference boards make use of SMB208 regulators which are > controlled by RPM. Implement support for these regulators in the RPM > regulator driver. Applied, thanks.
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index b869254..36c39e9 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -183,6 +183,13 @@ static const struct regulator_linear_range ftsmps_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), }; +static const struct regulator_linear_range smb208_ranges[] = { + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), + REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000), +}; + static const struct regulator_linear_range ncp_ranges[] = { REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), }; @@ -559,6 +566,16 @@ static const struct qcom_rpm_reg pm8921_switch = { .parts = &rpm8960_switch_parts, }; +static const struct qcom_rpm_reg smb208_smps = { + .desc.linear_ranges = smb208_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges), + .desc.n_voltages = 235, + .desc.ops = &uV_ops, + .parts = &rpm8960_smps_parts, + .supports_force_mode_auto = false, + .supports_force_mode_bypass = false, +}; + static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, @@ -578,6 +595,8 @@ static const struct of_device_id rpm_of_match[] = { { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, + + { .compatible = "qcom,rpm-smb208", .data = &smb208_smps }, { } }; MODULE_DEVICE_TABLE(of, rpm_of_match);
The IPQ8064 reference boards make use of SMB208 regulators which are controlled by RPM. Implement support for these regulators in the RPM regulator driver. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> --- drivers/regulator/qcom_rpm-regulator.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)