| Message ID | 1416982792-11917-3-git-send-email-taki@igel.co.jp (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
Hello. On 11/26/2014 9:19 AM, Takanari Hayama wrote: > Regardless of a number of inputs, we should always enable virtual RPF > when BRU is used. This allows the case when there's only one input to > BRU, and a size of the input is smaller than a size of an output of BRU. > Signed-off-by: Takanari Hayama <taki@igel.co.jp> > --- > drivers/media/platform/vsp1/vsp1_wpf.c | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c > index 6e05776..29ea28b 100644 > --- a/drivers/media/platform/vsp1/vsp1_wpf.c > +++ b/drivers/media/platform/vsp1/vsp1_wpf.c > @@ -92,19 +92,20 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) > return 0; > } > > - /* Sources. If the pipeline has a single input configure it as the > - * master layer. Otherwise configure all inputs as sub-layers and > - * select the virtual RPF as the master layer. > + /* Sources. If the pipeline has a single input and BRU is not used, > + * configure it as the master layer. Otherwise configure all > + * inputs as sub-layers and select the virtual RPF as the master > + * layer. > */ > for (i = 0; i < pipe->num_inputs; ++i) { > struct vsp1_rwpf *input = pipe->inputs[i]; > > - srcrpf |= pipe->num_inputs == 1 > + srcrpf |= ((!pipe->bru) && (pipe->num_inputs == 1)) Inner parens not needed, especially in the first case. > ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) > : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); > } > > - if (pipe->num_inputs > 1) > + if ((pipe->bru) || (pipe->num_inputs > 1)) Likewise. [...] WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Sergei, On 11/26/14, 9:55 PM, Sergei Shtylyov wrote: > Hello. > > On 11/26/2014 9:19 AM, Takanari Hayama wrote: > >> Regardless of a number of inputs, we should always enable virtual RPF >> when BRU is used. This allows the case when there's only one input to >> BRU, and a size of the input is smaller than a size of an output of BRU. > >> Signed-off-by: Takanari Hayama <taki@igel.co.jp> >> --- >> drivers/media/platform/vsp1/vsp1_wpf.c | 11 ++++++----- >> 1 file changed, 6 insertions(+), 5 deletions(-) > >> diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c >> b/drivers/media/platform/vsp1/vsp1_wpf.c >> index 6e05776..29ea28b 100644 >> --- a/drivers/media/platform/vsp1/vsp1_wpf.c >> +++ b/drivers/media/platform/vsp1/vsp1_wpf.c >> @@ -92,19 +92,20 @@ static int wpf_s_stream(struct v4l2_subdev >> *subdev, int enable) >> return 0; >> } >> >> - /* Sources. If the pipeline has a single input configure it as the >> - * master layer. Otherwise configure all inputs as sub-layers and >> - * select the virtual RPF as the master layer. >> + /* Sources. If the pipeline has a single input and BRU is not used, >> + * configure it as the master layer. Otherwise configure all >> + * inputs as sub-layers and select the virtual RPF as the master >> + * layer. >> */ >> for (i = 0; i < pipe->num_inputs; ++i) { >> struct vsp1_rwpf *input = pipe->inputs[i]; >> >> - srcrpf |= pipe->num_inputs == 1 >> + srcrpf |= ((!pipe->bru) && (pipe->num_inputs == 1)) > > Inner parens not needed, especially in the first case. Ok. Will fix it. >> ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) >> : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); >> } >> >> - if (pipe->num_inputs > 1) >> + if ((pipe->bru) || (pipe->num_inputs > 1)) > > Likewise. Here too. Thanks! > [...] > > WBR, Sergei Cheers, Takanari Hayama, Ph.D. (taki@igel.co.jp) IGEL Co.,Ltd. http://www.igel.co.jp/ -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/vsp1/vsp1_wpf.c b/drivers/media/platform/vsp1/vsp1_wpf.c index 6e05776..29ea28b 100644 --- a/drivers/media/platform/vsp1/vsp1_wpf.c +++ b/drivers/media/platform/vsp1/vsp1_wpf.c @@ -92,19 +92,20 @@ static int wpf_s_stream(struct v4l2_subdev *subdev, int enable) return 0; } - /* Sources. If the pipeline has a single input configure it as the - * master layer. Otherwise configure all inputs as sub-layers and - * select the virtual RPF as the master layer. + /* Sources. If the pipeline has a single input and BRU is not used, + * configure it as the master layer. Otherwise configure all + * inputs as sub-layers and select the virtual RPF as the master + * layer. */ for (i = 0; i < pipe->num_inputs; ++i) { struct vsp1_rwpf *input = pipe->inputs[i]; - srcrpf |= pipe->num_inputs == 1 + srcrpf |= ((!pipe->bru) && (pipe->num_inputs == 1)) ? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index) : VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index); } - if (pipe->num_inputs > 1) + if ((pipe->bru) || (pipe->num_inputs > 1)) srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST; vsp1_wpf_write(wpf, VI6_WPF_SRCRPF, srcrpf);
Regardless of a number of inputs, we should always enable virtual RPF when BRU is used. This allows the case when there's only one input to BRU, and a size of the input is smaller than a size of an output of BRU. Signed-off-by: Takanari Hayama <taki@igel.co.jp> --- drivers/media/platform/vsp1/vsp1_wpf.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)