diff mbox

[1/9] drm: add helper to get crtc timings (v4)

Message ID 1416858786-25376-2-git-send-email-matthew.d.roper@intel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Matt Roper Nov. 24, 2014, 7:52 p.m. UTC 
From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>

We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.

v2 (by Matt): Use new stereo doubling function (suggested by Ville)

v3 (by Matt):
 - Add missing kerneldoc (Daniel)
 - Use drm_mode_copy() (Jani)

v4 (by Matt):
 - Drop stereo doubling function again; add 'stereo only' flag
   to drm_mode_set_crtcinfo() instead (Ville)

Cc: dri-devel@lists.freedesktop.org
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 drivers/gpu/drm/drm_crtc.c           | 32 ++++++++++++++++++++++----------
 drivers/gpu/drm/drm_modes.c          | 24 ++++++++++++++----------
 drivers/gpu/drm/i915/intel_display.c |  6 +++---
 include/drm/drm_crtc.h               |  2 ++
 include/drm/drm_modes.h              |  3 +++
 5 files changed, 44 insertions(+), 23 deletions(-)

Comments

Ander Conselvan de Oliveira Nov. 27, 2014, 2:19 p.m. UTC | #1 
On 11/24/2014 09:52 PM, Matt Roper wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>
> We need to get hdisplay and vdisplay in a few places so create a
> helper to make our job easier.
>
> v2 (by Matt): Use new stereo doubling function (suggested by Ville)
>
> v3 (by Matt):
>   - Add missing kerneldoc (Daniel)
>   - Use drm_mode_copy() (Jani)
>
> v4 (by Matt):
>   - Drop stereo doubling function again; add 'stereo only' flag
>     to drm_mode_set_crtcinfo() instead (Ville)
>
> Cc: dri-devel@lists.freedesktop.org
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>   drivers/gpu/drm/drm_crtc.c           | 32 ++++++++++++++++++++++----------
>   drivers/gpu/drm/drm_modes.c          | 24 ++++++++++++++----------
>   drivers/gpu/drm/i915/intel_display.c |  6 +++---
>   include/drm/drm_crtc.h               |  2 ++
>   include/drm/drm_modes.h              |  3 +++
>   5 files changed, 44 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 589a921..f06f1b4 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -2499,6 +2499,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
>   EXPORT_SYMBOL(drm_mode_set_config_internal);
>
>   /**
> + * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
> + * @mode: mode to query
> + * @hdisplay: hdisplay value to fill in
> + * @vdisplay: vdisplay value to fill in
> + *
> + * The vdisplay value will be doubled if the specified mode is a stereo mode of
> + * the appropriate layout.
> + */
> +void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> +			    int *hdisplay, int *vdisplay)
> +{
> +	struct drm_display_mode adjusted;
> +
> +	drm_mode_copy(&adjusted, mode);
> +	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
> +	*hdisplay = adjusted.crtc_hdisplay;
> +	*vdisplay = adjusted.crtc_vdisplay;
> +}
> +EXPORT_SYMBOL(drm_crtc_get_hv_timing);
> +
> +/**
>    * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
>    *     CRTC viewport
>    * @crtc: CRTC that framebuffer will be displayed on
> @@ -2515,16 +2536,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc,
>   {
>   	int hdisplay, vdisplay;
>
> -	hdisplay = mode->hdisplay;
> -	vdisplay = mode->vdisplay;
> -
> -	if (drm_mode_is_stereo(mode)) {
> -		struct drm_display_mode adjusted = *mode;
> -
> -		drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
> -		hdisplay = adjusted.crtc_hdisplay;
> -		vdisplay = adjusted.crtc_vdisplay;
> -	}
> +	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);

This changes the behavior slightly since before, for stereo modes, 
dbl_scan and vscan would affect hdisplay and vdisplay. If I understand 
correctly the old behavior is a bug, but it would be good to state that 
the change is intentional.

>
>   	if (crtc->invert_dimensions)
>   		swap(hdisplay, vdisplay);
> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> index 6d8b941..fd5479b 100644
> --- a/drivers/gpu/drm/drm_modes.c
> +++ b/drivers/gpu/drm/drm_modes.c
> @@ -765,18 +765,22 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
>   		}
>   	}
>
> -	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
> -		p->crtc_vdisplay *= 2;
> -		p->crtc_vsync_start *= 2;
> -		p->crtc_vsync_end *= 2;
> -		p->crtc_vtotal *= 2;
> +	if (!(adjust_flags & CRTC_NO_DBLSCAN)) {
> +		if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
> +			p->crtc_vdisplay *= 2;
> +			p->crtc_vsync_start *= 2;
> +			p->crtc_vsync_end *= 2;
> +			p->crtc_vtotal *= 2;
> +		}
>   	}
>
> -	if (p->vscan > 1) {
> -		p->crtc_vdisplay *= p->vscan;
> -		p->crtc_vsync_start *= p->vscan;
> -		p->crtc_vsync_end *= p->vscan;
> -		p->crtc_vtotal *= p->vscan;
> +	if (!(adjust_flags & CRTC_NO_VSCAN)) {
> +		if (p->vscan > 1) {
> +			p->crtc_vdisplay *= p->vscan;
> +			p->crtc_vsync_start *= p->vscan;
> +			p->crtc_vsync_end *= p->vscan;
> +			p->crtc_vtotal *= p->vscan;
> +		}
>   	}
>
>   	if (adjust_flags & CRTC_STEREO_DOUBLE) {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index a3d2a44..b87aeab 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10205,9 +10205,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
>   	 * computation to clearly distinguish it from the adjusted mode, which
>   	 * can be changed by the connectors in the below retry loop.
>   	 */
> -	drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
> -	pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
> -	pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
> +	drm_crtc_get_hv_timing(&pipe_config->requested_mode,
> +			       &pipe_config->pipe_src_w,
> +			       &pipe_config->pipe_src_h);

Same thing here.


>   encoder_retry:
>   	/* Ensure the port clock defaults are reset when retrying. */
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index b459e8f..6e46c5d 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1140,6 +1140,8 @@ extern int drm_plane_init(struct drm_device *dev,
>   extern void drm_plane_cleanup(struct drm_plane *plane);
>   extern unsigned int drm_plane_index(struct drm_plane *plane);
>   extern void drm_plane_force_disable(struct drm_plane *plane);
> +extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
> +				   int *hdisplay, int *vdisplay);
>   extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
>   				   int x, int y,
>   				   const struct drm_display_mode *mode,
> diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
> index 91d0582..8f17811 100644
> --- a/include/drm/drm_modes.h
> +++ b/include/drm/drm_modes.h
> @@ -90,6 +90,9 @@ enum drm_mode_status {
>
>   #define CRTC_INTERLACE_HALVE_V	(1 << 0) /* halve V values for interlacing */
>   #define CRTC_STEREO_DOUBLE	(1 << 1) /* adjust timings for stereo modes */
> +#define CRTC_NO_DBLSCAN		(1 << 2) /* don't adjust doublescan */
> +#define CRTC_NO_VSCAN		(1 << 3) /* don't adjust doublescan */
> +#define CRTC_STEREO_DOUBLE_ONLY	(CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)

The kernel doc of drm_mode_set_crtcinfo() has a brief explanation of 
what the flags above do. I think it would be proper to update that with 
the new additions.

Cheers,
Ander

>
>   #define DRM_MODE_FLAG_3D_MAX	DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
>
>
diff mbox

Patch

diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 589a921..f06f1b4 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2499,6 +2499,27 @@  int drm_mode_set_config_internal(struct drm_mode_set *set)
 EXPORT_SYMBOL(drm_mode_set_config_internal);
 
 /**
+ * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode
+ * @mode: mode to query
+ * @hdisplay: hdisplay value to fill in
+ * @vdisplay: vdisplay value to fill in
+ *
+ * The vdisplay value will be doubled if the specified mode is a stereo mode of
+ * the appropriate layout.
+ */
+void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+			    int *hdisplay, int *vdisplay)
+{
+	struct drm_display_mode adjusted;
+
+	drm_mode_copy(&adjusted, mode);
+	drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY);
+	*hdisplay = adjusted.crtc_hdisplay;
+	*vdisplay = adjusted.crtc_vdisplay;
+}
+EXPORT_SYMBOL(drm_crtc_get_hv_timing);
+
+/**
  * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the
  *     CRTC viewport
  * @crtc: CRTC that framebuffer will be displayed on
@@ -2515,16 +2536,7 @@  int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 {
 	int hdisplay, vdisplay;
 
-	hdisplay = mode->hdisplay;
-	vdisplay = mode->vdisplay;
-
-	if (drm_mode_is_stereo(mode)) {
-		struct drm_display_mode adjusted = *mode;
-
-		drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE);
-		hdisplay = adjusted.crtc_hdisplay;
-		vdisplay = adjusted.crtc_vdisplay;
-	}
+	drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
 
 	if (crtc->invert_dimensions)
 		swap(hdisplay, vdisplay);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 6d8b941..fd5479b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -765,18 +765,22 @@  void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
 		}
 	}
 
-	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
-		p->crtc_vdisplay *= 2;
-		p->crtc_vsync_start *= 2;
-		p->crtc_vsync_end *= 2;
-		p->crtc_vtotal *= 2;
+	if (!(adjust_flags & CRTC_NO_DBLSCAN)) {
+		if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+			p->crtc_vdisplay *= 2;
+			p->crtc_vsync_start *= 2;
+			p->crtc_vsync_end *= 2;
+			p->crtc_vtotal *= 2;
+		}
 	}
 
-	if (p->vscan > 1) {
-		p->crtc_vdisplay *= p->vscan;
-		p->crtc_vsync_start *= p->vscan;
-		p->crtc_vsync_end *= p->vscan;
-		p->crtc_vtotal *= p->vscan;
+	if (!(adjust_flags & CRTC_NO_VSCAN)) {
+		if (p->vscan > 1) {
+			p->crtc_vdisplay *= p->vscan;
+			p->crtc_vsync_start *= p->vscan;
+			p->crtc_vsync_end *= p->vscan;
+			p->crtc_vtotal *= p->vscan;
+		}
 	}
 
 	if (adjust_flags & CRTC_STEREO_DOUBLE) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a3d2a44..b87aeab 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10205,9 +10205,9 @@  intel_modeset_pipe_config(struct drm_crtc *crtc,
 	 * computation to clearly distinguish it from the adjusted mode, which
 	 * can be changed by the connectors in the below retry loop.
 	 */
-	drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE);
-	pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay;
-	pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay;
+	drm_crtc_get_hv_timing(&pipe_config->requested_mode,
+			       &pipe_config->pipe_src_w,
+			       &pipe_config->pipe_src_h);
 
 encoder_retry:
 	/* Ensure the port clock defaults are reset when retrying. */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index b459e8f..6e46c5d 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1140,6 +1140,8 @@  extern int drm_plane_init(struct drm_device *dev,
 extern void drm_plane_cleanup(struct drm_plane *plane);
 extern unsigned int drm_plane_index(struct drm_plane *plane);
 extern void drm_plane_force_disable(struct drm_plane *plane);
+extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
+				   int *hdisplay, int *vdisplay);
 extern int drm_crtc_check_viewport(const struct drm_crtc *crtc,
 				   int x, int y,
 				   const struct drm_display_mode *mode,
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h
index 91d0582..8f17811 100644
--- a/include/drm/drm_modes.h
+++ b/include/drm/drm_modes.h
@@ -90,6 +90,9 @@  enum drm_mode_status {
 
 #define CRTC_INTERLACE_HALVE_V	(1 << 0) /* halve V values for interlacing */
 #define CRTC_STEREO_DOUBLE	(1 << 1) /* adjust timings for stereo modes */
+#define CRTC_NO_DBLSCAN		(1 << 2) /* don't adjust doublescan */
+#define CRTC_NO_VSCAN		(1 << 3) /* don't adjust doublescan */
+#define CRTC_STEREO_DOUBLE_ONLY	(CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
 
 #define DRM_MODE_FLAG_3D_MAX	DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF