| Message ID | 1416767760-14487-5-git-send-email-eric.auger@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Nov 23, 2014 at 07:35:56PM +0100, Eric Auger wrote: > This patch adds and document a new KVM_DEV_VFIO_DEVICE group documents > and 2 device attributes: KVM_DEV_VFIO_DEVICE_FORWARD_IRQ, > KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ. The purpose is to be able > to set a VFIO device IRQ as forwarded or not forwarded. > the command takes as argument a handle to a new struct named > kvm_arch_forwarded_irq. > > Signed-off-by: Eric Auger <eric.auger@linaro.org> > > --- > > v2 -> v3: > - rework vfio kvm device documentation > - reword commit message and title > - add subindex in kvm_arch_forwarded_irq to be closer to VFIO API > - forwarding state can only be changed with VFIO IRQ signaling is off > > v1 -> v2: > - struct kvm_arch_forwarded_irq moved from arch/arm/include/uapi/asm/kvm.h > to include/uapi/linux/kvm.h > also irq_index renamed into index and guest_irq renamed into gsi > - ASSIGN/DEASSIGN renamed into FORWARD/UNFORWARD > --- > Documentation/virtual/kvm/devices/vfio.txt | 34 ++++++++++++++++++++++++------ > include/uapi/linux/kvm.h | 10 +++++++++ > 2 files changed, 38 insertions(+), 6 deletions(-) > > diff --git a/Documentation/virtual/kvm/devices/vfio.txt b/Documentation/virtual/kvm/devices/vfio.txt > index ef51740..f7aff29 100644 > --- a/Documentation/virtual/kvm/devices/vfio.txt > +++ b/Documentation/virtual/kvm/devices/vfio.txt > @@ -4,15 +4,24 @@ VFIO virtual device > Device types supported: > KVM_DEV_TYPE_VFIO > > -Only one VFIO instance may be created per VM. The created device > -tracks VFIO groups in use by the VM and features of those groups > -important to the correctness and acceleration of the VM. As groups > -are enabled and disabled for use by the VM, KVM should be updated > -about their presence. When registered with KVM, a reference to the > -VFIO-group is held by KVM. > +Only one VFIO instance may be created per VM. > + > +The created device tracks VFIO groups in use by the VM and features > +of those groups important to the correctness and acceleration of > +the VM. As groups are enabled and disabled for use by the VM, KVM > +should be updated about their presence. When registered with KVM, > +a reference to the VFIO-group is held by KVM. > + > +The device also tracks & enable VFIO device forwarded IRQs, if any. s/tracks & enable/tracks and enables/ > +A physical forwarded IRQ is directly completed by the guest. This > +requires HW support in the interrupt controller which must be able > +to automatically complete the physical IRQ when it detects the guest > +has completed the corresponding virtual IRQ. The modality sometimes > +is named direct EOI. this last sentence is a bit floating out there; perhaps you want to be more specific and say what it is on ARM. > > Groups: > KVM_DEV_VFIO_GROUP > + KVM_DEV_VFIO_DEVICE > > KVM_DEV_VFIO_GROUP attributes: > KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking > @@ -20,3 +29,16 @@ KVM_DEV_VFIO_GROUP attributes: > > For each, kvm_device_attr.addr points to an int32_t file descriptor > for the VFIO group. > + > +KVM_DEV_VFIO_DEVICE attributes: > + KVM_DEV_VFIO_DEVICE_FORWARD_IRQ: set a VFIO device IRQ as forwarded > + KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ: set a VFIO device IRQ as not forwarded > + > +For each, kvm_device_attr.addr points to a kvm_arch_forwarded_irq struct. > + > +The forwarded state can only be changed when the VFIO signaling mechanism > +for this physical IRQ is not set. In other words, forwarding must be > +activated before VFIO_DEVICE_SET_IRQS has been called to trigger the IRQ > +or associate an eventfd to it. Unforwarding can only be called while the > +signaling has been disabled with VFIO_DEVICE_SET_IRQS. If this condition is > +not satisfied, the command returns an -EBUSY. s/command/ioctl/ > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 6076882..a269a42 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -946,6 +946,9 @@ struct kvm_device_attr { > #define KVM_DEV_VFIO_GROUP 1 > #define KVM_DEV_VFIO_GROUP_ADD 1 > #define KVM_DEV_VFIO_GROUP_DEL 2 > +#define KVM_DEV_VFIO_DEVICE 2 > +#define KVM_DEV_VFIO_DEVICE_FORWARD_IRQ 1 > +#define KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ 2 > > enum kvm_device_type { > KVM_DEV_TYPE_FSL_MPIC_20 = 1, > @@ -963,6 +966,13 @@ enum kvm_device_type { > KVM_DEV_TYPE_MAX, > }; > > +struct kvm_arch_forwarded_irq { > + __u32 fd; /* file desciptor of the VFIO device */ > + __u32 index; /* VFIO device IRQ index */ > + __u32 subindex; /* VFIO device IRQ subindex */ > + __u32 gsi; /* gsi, ie. virtual IRQ number */ > +}; > + > /* > * ioctls for VM fds > */ > -- > 1.9.1 > otherwise this looks reasonable. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/30/2014 01:53 PM, Christoffer Dall wrote: > On Sun, Nov 23, 2014 at 07:35:56PM +0100, Eric Auger wrote: >> This patch adds and document a new KVM_DEV_VFIO_DEVICE group > > documents OK > >> and 2 device attributes: KVM_DEV_VFIO_DEVICE_FORWARD_IRQ, >> KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ. The purpose is to be able >> to set a VFIO device IRQ as forwarded or not forwarded. >> the command takes as argument a handle to a new struct named >> kvm_arch_forwarded_irq. >> >> Signed-off-by: Eric Auger <eric.auger@linaro.org> >> >> --- >> >> v2 -> v3: >> - rework vfio kvm device documentation >> - reword commit message and title >> - add subindex in kvm_arch_forwarded_irq to be closer to VFIO API >> - forwarding state can only be changed with VFIO IRQ signaling is off >> >> v1 -> v2: >> - struct kvm_arch_forwarded_irq moved from arch/arm/include/uapi/asm/kvm.h >> to include/uapi/linux/kvm.h >> also irq_index renamed into index and guest_irq renamed into gsi >> - ASSIGN/DEASSIGN renamed into FORWARD/UNFORWARD >> --- >> Documentation/virtual/kvm/devices/vfio.txt | 34 ++++++++++++++++++++++++------ >> include/uapi/linux/kvm.h | 10 +++++++++ >> 2 files changed, 38 insertions(+), 6 deletions(-) >> >> diff --git a/Documentation/virtual/kvm/devices/vfio.txt b/Documentation/virtual/kvm/devices/vfio.txt >> index ef51740..f7aff29 100644 >> --- a/Documentation/virtual/kvm/devices/vfio.txt >> +++ b/Documentation/virtual/kvm/devices/vfio.txt >> @@ -4,15 +4,24 @@ VFIO virtual device >> Device types supported: >> KVM_DEV_TYPE_VFIO >> >> -Only one VFIO instance may be created per VM. The created device >> -tracks VFIO groups in use by the VM and features of those groups >> -important to the correctness and acceleration of the VM. As groups >> -are enabled and disabled for use by the VM, KVM should be updated >> -about their presence. When registered with KVM, a reference to the >> -VFIO-group is held by KVM. >> +Only one VFIO instance may be created per VM. >> + >> +The created device tracks VFIO groups in use by the VM and features >> +of those groups important to the correctness and acceleration of >> +the VM. As groups are enabled and disabled for use by the VM, KVM >> +should be updated about their presence. When registered with KVM, >> +a reference to the VFIO-group is held by KVM. >> + >> +The device also tracks & enable VFIO device forwarded IRQs, if any. > > s/tracks & enable/tracks and enables/ ok > >> +A physical forwarded IRQ is directly completed by the guest. This >> +requires HW support in the interrupt controller which must be able >> +to automatically complete the physical IRQ when it detects the guest >> +has completed the corresponding virtual IRQ. The modality sometimes >> +is named direct EOI. > > this last sentence is a bit floating out there; perhaps you want to be > more specific and say what it is on ARM. Well this is naming some people used at the KVM forum. I thought this was something known on other archs but I can drop this comment. > >> >> Groups: >> KVM_DEV_VFIO_GROUP >> + KVM_DEV_VFIO_DEVICE >> >> KVM_DEV_VFIO_GROUP attributes: >> KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking >> @@ -20,3 +29,16 @@ KVM_DEV_VFIO_GROUP attributes: >> >> For each, kvm_device_attr.addr points to an int32_t file descriptor >> for the VFIO group. >> + >> +KVM_DEV_VFIO_DEVICE attributes: >> + KVM_DEV_VFIO_DEVICE_FORWARD_IRQ: set a VFIO device IRQ as forwarded >> + KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ: set a VFIO device IRQ as not forwarded >> + >> +For each, kvm_device_attr.addr points to a kvm_arch_forwarded_irq struct. >> + >> +The forwarded state can only be changed when the VFIO signaling mechanism >> +for this physical IRQ is not set. In other words, forwarding must be >> +activated before VFIO_DEVICE_SET_IRQS has been called to trigger the IRQ >> +or associate an eventfd to it. Unforwarding can only be called while the >> +signaling has been disabled with VFIO_DEVICE_SET_IRQS. If this condition is >> +not satisfied, the command returns an -EBUSY. > > s/command/ioctl/ ok > >> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h >> index 6076882..a269a42 100644 >> --- a/include/uapi/linux/kvm.h >> +++ b/include/uapi/linux/kvm.h >> @@ -946,6 +946,9 @@ struct kvm_device_attr { >> #define KVM_DEV_VFIO_GROUP 1 >> #define KVM_DEV_VFIO_GROUP_ADD 1 >> #define KVM_DEV_VFIO_GROUP_DEL 2 >> +#define KVM_DEV_VFIO_DEVICE 2 >> +#define KVM_DEV_VFIO_DEVICE_FORWARD_IRQ 1 >> +#define KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ 2 >> >> enum kvm_device_type { >> KVM_DEV_TYPE_FSL_MPIC_20 = 1, >> @@ -963,6 +966,13 @@ enum kvm_device_type { >> KVM_DEV_TYPE_MAX, >> }; >> >> +struct kvm_arch_forwarded_irq { >> + __u32 fd; /* file desciptor of the VFIO device */ >> + __u32 index; /* VFIO device IRQ index */ >> + __u32 subindex; /* VFIO device IRQ subindex */ >> + __u32 gsi; /* gsi, ie. virtual IRQ number */ >> +}; >> + >> /* >> * ioctls for VM fds >> */ >> -- >> 1.9.1 >> > > otherwise this looks reasonable. thanks Eric > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/virtual/kvm/devices/vfio.txt b/Documentation/virtual/kvm/devices/vfio.txt index ef51740..f7aff29 100644 --- a/Documentation/virtual/kvm/devices/vfio.txt +++ b/Documentation/virtual/kvm/devices/vfio.txt @@ -4,15 +4,24 @@ VFIO virtual device Device types supported: KVM_DEV_TYPE_VFIO -Only one VFIO instance may be created per VM. The created device -tracks VFIO groups in use by the VM and features of those groups -important to the correctness and acceleration of the VM. As groups -are enabled and disabled for use by the VM, KVM should be updated -about their presence. When registered with KVM, a reference to the -VFIO-group is held by KVM. +Only one VFIO instance may be created per VM. + +The created device tracks VFIO groups in use by the VM and features +of those groups important to the correctness and acceleration of +the VM. As groups are enabled and disabled for use by the VM, KVM +should be updated about their presence. When registered with KVM, +a reference to the VFIO-group is held by KVM. + +The device also tracks & enable VFIO device forwarded IRQs, if any. +A physical forwarded IRQ is directly completed by the guest. This +requires HW support in the interrupt controller which must be able +to automatically complete the physical IRQ when it detects the guest +has completed the corresponding virtual IRQ. The modality sometimes +is named direct EOI. Groups: KVM_DEV_VFIO_GROUP + KVM_DEV_VFIO_DEVICE KVM_DEV_VFIO_GROUP attributes: KVM_DEV_VFIO_GROUP_ADD: Add a VFIO group to VFIO-KVM device tracking @@ -20,3 +29,16 @@ KVM_DEV_VFIO_GROUP attributes: For each, kvm_device_attr.addr points to an int32_t file descriptor for the VFIO group. + +KVM_DEV_VFIO_DEVICE attributes: + KVM_DEV_VFIO_DEVICE_FORWARD_IRQ: set a VFIO device IRQ as forwarded + KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ: set a VFIO device IRQ as not forwarded + +For each, kvm_device_attr.addr points to a kvm_arch_forwarded_irq struct. + +The forwarded state can only be changed when the VFIO signaling mechanism +for this physical IRQ is not set. In other words, forwarding must be +activated before VFIO_DEVICE_SET_IRQS has been called to trigger the IRQ +or associate an eventfd to it. Unforwarding can only be called while the +signaling has been disabled with VFIO_DEVICE_SET_IRQS. If this condition is +not satisfied, the command returns an -EBUSY. diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 6076882..a269a42 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -946,6 +946,9 @@ struct kvm_device_attr { #define KVM_DEV_VFIO_GROUP 1 #define KVM_DEV_VFIO_GROUP_ADD 1 #define KVM_DEV_VFIO_GROUP_DEL 2 +#define KVM_DEV_VFIO_DEVICE 2 +#define KVM_DEV_VFIO_DEVICE_FORWARD_IRQ 1 +#define KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ 2 enum kvm_device_type { KVM_DEV_TYPE_FSL_MPIC_20 = 1, @@ -963,6 +966,13 @@ enum kvm_device_type { KVM_DEV_TYPE_MAX, }; +struct kvm_arch_forwarded_irq { + __u32 fd; /* file desciptor of the VFIO device */ + __u32 index; /* VFIO device IRQ index */ + __u32 subindex; /* VFIO device IRQ subindex */ + __u32 gsi; /* gsi, ie. virtual IRQ number */ +}; + /* * ioctls for VM fds */
This patch adds and document a new KVM_DEV_VFIO_DEVICE group and 2 device attributes: KVM_DEV_VFIO_DEVICE_FORWARD_IRQ, KVM_DEV_VFIO_DEVICE_UNFORWARD_IRQ. The purpose is to be able to set a VFIO device IRQ as forwarded or not forwarded. the command takes as argument a handle to a new struct named kvm_arch_forwarded_irq. Signed-off-by: Eric Auger <eric.auger@linaro.org> --- v2 -> v3: - rework vfio kvm device documentation - reword commit message and title - add subindex in kvm_arch_forwarded_irq to be closer to VFIO API - forwarding state can only be changed with VFIO IRQ signaling is off v1 -> v2: - struct kvm_arch_forwarded_irq moved from arch/arm/include/uapi/asm/kvm.h to include/uapi/linux/kvm.h also irq_index renamed into index and guest_irq renamed into gsi - ASSIGN/DEASSIGN renamed into FORWARD/UNFORWARD --- Documentation/virtual/kvm/devices/vfio.txt | 34 ++++++++++++++++++++++++------ include/uapi/linux/kvm.h | 10 +++++++++ 2 files changed, 38 insertions(+), 6 deletions(-)