diff mbox

[v3,2/3] Documentation: DT: Add documentation for ti,opa362 bindings

Message ID 1417352867-7436-3-git-send-email-marek@goldelico.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marek Belisko Nov. 30, 2014, 1:07 p.m. UTC 
Signed-off-by: Marek Belisko <marek@goldelico.com>
---
 .../devicetree/bindings/video/ti,opa362.txt        | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt

Comments

Tomi Valkeinen Dec. 3, 2014, 12:18 p.m. UTC | #1 
On 30/11/14 15:07, Marek Belisko wrote:
> Signed-off-by: Marek Belisko <marek@goldelico.com>
> ---
>  .../devicetree/bindings/video/ti,opa362.txt        | 38 ++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
> new file mode 100644
> index 0000000..4747ef9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
> @@ -0,0 +1,38 @@
> +OPA362 analog video amplifier
> +
> +Required properties:
> +- compatible: "ti,opa362"
> +- gpio: enable/disable output gpio

Either this or the example is wrong. If I'm not mistaken 'gpios' is the
correct form.

 Tomi
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 0000000..4747ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@ 
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- gpio: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+