diff mbox

crypto: qat - fix problem with coalescing enable logic

Message ID 20141203050847.10558.83640.stgit@tstruk-mobl1 (mailing list archive)
State Accepted
Delegated to: Herbert Xu
Headers show

Commit Message

Tadeusz Struk Dec. 3, 2014, 5:08 a.m. UTC 
Fixed issue reported by Dan Carpenter

410          if (adf_get_cfg_int(accel_dev, "Accelerator0",
411				 ADF_ETRMGR_COALESCING_ENABLED_FORMAT,
412                              bank_num, &coalesc_enabled) && coalesc_enabled)
This condition is reversed, so it only enables coalescing on error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
---
 drivers/crypto/qat/qat_common/adf_transport.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-crypto" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Herbert Xu Dec. 4, 2014, 3:51 p.m. UTC | #1 
On Tue, Dec 02, 2014 at 09:08:48PM -0800, Tadeusz Struk wrote:
> Fixed issue reported by Dan Carpenter
> 
> 410          if (adf_get_cfg_int(accel_dev, "Accelerator0",
> 411				 ADF_ETRMGR_COALESCING_ENABLED_FORMAT,
> 412                              bank_num, &coalesc_enabled) && coalesc_enabled)
> This condition is reversed, so it only enables coalescing on error.
> 
> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

Patch applied.
diff mbox

Patch

diff --git a/drivers/crypto/qat/qat_common/adf_transport.c b/drivers/crypto/qat/qat_common/adf_transport.c
index 5f3fa45..5890992 100644
--- a/drivers/crypto/qat/qat_common/adf_transport.c
+++ b/drivers/crypto/qat/qat_common/adf_transport.c
@@ -376,8 +376,9 @@  static inline int adf_get_cfg_int(struct adf_accel_dev *accel_dev,
 	return 0;
 }
 
-static void adf_enable_coalesc(struct adf_etr_bank_data *bank,
-			       const char *section, uint32_t bank_num_in_accel)
+static void adf_get_coalesc_timer(struct adf_etr_bank_data *bank,
+				  const char *section,
+				  uint32_t bank_num_in_accel)
 {
 	if (adf_get_cfg_int(bank->accel_dev, section,
 			    ADF_ETRMGR_COALESCE_TIMER_FORMAT,
@@ -396,7 +397,7 @@  static int adf_init_bank(struct adf_accel_dev *accel_dev,
 	struct adf_hw_device_data *hw_data = accel_dev->hw_device;
 	struct adf_etr_ring_data *ring;
 	struct adf_etr_ring_data *tx_ring;
-	uint32_t i, coalesc_enabled;
+	uint32_t i, coalesc_enabled = 0;
 
 	memset(bank, 0, sizeof(*bank));
 	bank->bank_number = bank_num;
@@ -407,10 +408,10 @@  static int adf_init_bank(struct adf_accel_dev *accel_dev,
 	/* Enable IRQ coalescing always. This will allow to use
 	 * the optimised flag and coalesc register.
 	 * If it is disabled in the config file just use min time value */
-	if (adf_get_cfg_int(accel_dev, "Accelerator0",
-			    ADF_ETRMGR_COALESCING_ENABLED_FORMAT,
-			    bank_num, &coalesc_enabled) && coalesc_enabled)
-		adf_enable_coalesc(bank, "Accelerator0", bank_num);
+	if ((adf_get_cfg_int(accel_dev, "Accelerator0",
+			     ADF_ETRMGR_COALESCING_ENABLED_FORMAT, bank_num,
+			     &coalesc_enabled) == 0) && coalesc_enabled)
+		adf_get_coalesc_timer(bank, "Accelerator0", bank_num);
 	else
 		bank->irq_coalesc_timer = ADF_COALESCING_MIN_TIME;