| Message ID | 1419702779-16001-4-git-send-email-aaro.koskinen@iki.fi (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Dec 27, 2014 at 07:52:55PM +0200, Aaro Koskinen wrote: > Add initial DT support. > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > --- > Documentation/devicetree/bindings/mfd/menelaus.txt | 30 +++++++++++++ > drivers/mfd/menelaus.c | 52 ++++++++++++++++++++-- > 2 files changed, 78 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/menelaus.txt > > diff --git a/Documentation/devicetree/bindings/mfd/menelaus.txt b/Documentation/devicetree/bindings/mfd/menelaus.txt > new file mode 100644 > index 0000000..5f69f23 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/menelaus.txt > @@ -0,0 +1,30 @@ > +Menelaus (Texas Instruments TWL92330) Power Management chip > + > +Menelaus provides facilities to control the power resources. > + > +Required properties: > +- compatible: must be "menelaus" > +- reg: I2C address of the chip > + > +Optional properties: > +- interrupts: the interrupt > +- ti,autosleep: All regulators are put to sleep by default. > +- ti,vcore-min-microvolt: Range floor for the HW controlled VCORE > +- ti,vcore-max-microvolt: Range roof for the HW controlled VCORE > + > +The use of ti,autosleep is recommended at least on Nokia N800/N810. > + > +Example: > + > +&i2c1 { > + clock-frequency = <400000>; > + > + pmic@72 { > + compatible = "menelaus"; > + reg = <0x72>; > + interrupts = <7 IRQ_TYPE_EDGE_RISING>; > + ti,autosleep; > + ti,vcore-min-microvolt = <1050000>; > + ti,vcore-max-microvolt = <1400000>; looks like these should be first converted to actual regulators otherwise we will have to maintain this binding forever which means that any effort of adding regulator fwk support for menelaus will become a lot more difficult because it'll have to cope with the legacy/bogus binding. I started doing irqchip/irqdomain conversion but I don't have where to test and got side-tracked by other stuff. I'll see if I can restart that work early next year. Then, if you change your series so that first you add proper regulator fwk support, we should be pretty good with menelaus.
Hi, On Sat, Dec 27, 2014 at 03:25:53PM -0600, Felipe Balbi wrote: > On Sat, Dec 27, 2014 at 07:52:55PM +0200, Aaro Koskinen wrote: > > Add initial DT support. > > > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > --- > > Documentation/devicetree/bindings/mfd/menelaus.txt | 30 +++++++++++++ > > drivers/mfd/menelaus.c | 52 ++++++++++++++++++++-- > > 2 files changed, 78 insertions(+), 4 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/mfd/menelaus.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/menelaus.txt b/Documentation/devicetree/bindings/mfd/menelaus.txt > > new file mode 100644 > > index 0000000..5f69f23 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/menelaus.txt > > @@ -0,0 +1,30 @@ > > +Menelaus (Texas Instruments TWL92330) Power Management chip > > + > > +Menelaus provides facilities to control the power resources. > > + > > +Required properties: > > +- compatible: must be "menelaus" > > +- reg: I2C address of the chip > > + > > +Optional properties: > > +- interrupts: the interrupt > > +- ti,autosleep: All regulators are put to sleep by default. > > +- ti,vcore-min-microvolt: Range floor for the HW controlled VCORE > > +- ti,vcore-max-microvolt: Range roof for the HW controlled VCORE > > + > > +The use of ti,autosleep is recommended at least on Nokia N800/N810. > > + > > +Example: > > + > > +&i2c1 { > > + clock-frequency = <400000>; > > + > > + pmic@72 { > > + compatible = "menelaus"; > > + reg = <0x72>; > > + interrupts = <7 IRQ_TYPE_EDGE_RISING>; > > + ti,autosleep; > > + ti,vcore-min-microvolt = <1050000>; > > + ti,vcore-max-microvolt = <1400000>; > > looks like these should be first converted to actual regulators > otherwise we will have to maintain this binding forever which means that > any effort of adding regulator fwk support for menelaus will become a > lot more difficult because it'll have to cope with the legacy/bogus > binding. I was thinking such conversion could be done with incremental patches... There's basically only one board (n8x0) that uses this and not likely to be any others. Is there a way to declare bindings unstable? > I started doing irqchip/irqdomain conversion but I don't have where to > test and got side-tracked by other stuff. I'll see if I can restart that > work early next year. > > Then, if you change your series so that first you add proper regulator > fwk support, we should be pretty good with menelaus. Ok, let's see. A. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Mon, Dec 29, 2014 at 01:34:45AM +0200, Aaro Koskinen wrote: > > > Add initial DT support. > > > > > > Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> > > > --- > > > Documentation/devicetree/bindings/mfd/menelaus.txt | 30 +++++++++++++ > > > drivers/mfd/menelaus.c | 52 ++++++++++++++++++++-- > > > 2 files changed, 78 insertions(+), 4 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/mfd/menelaus.txt > > > > > > diff --git a/Documentation/devicetree/bindings/mfd/menelaus.txt b/Documentation/devicetree/bindings/mfd/menelaus.txt > > > new file mode 100644 > > > index 0000000..5f69f23 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/mfd/menelaus.txt > > > @@ -0,0 +1,30 @@ > > > +Menelaus (Texas Instruments TWL92330) Power Management chip > > > + > > > +Menelaus provides facilities to control the power resources. > > > + > > > +Required properties: > > > +- compatible: must be "menelaus" > > > +- reg: I2C address of the chip > > > + > > > +Optional properties: > > > +- interrupts: the interrupt > > > +- ti,autosleep: All regulators are put to sleep by default. > > > +- ti,vcore-min-microvolt: Range floor for the HW controlled VCORE > > > +- ti,vcore-max-microvolt: Range roof for the HW controlled VCORE > > > + > > > +The use of ti,autosleep is recommended at least on Nokia N800/N810. > > > + > > > +Example: > > > + > > > +&i2c1 { > > > + clock-frequency = <400000>; > > > + > > > + pmic@72 { > > > + compatible = "menelaus"; > > > + reg = <0x72>; > > > + interrupts = <7 IRQ_TYPE_EDGE_RISING>; > > > + ti,autosleep; > > > + ti,vcore-min-microvolt = <1050000>; > > > + ti,vcore-max-microvolt = <1400000>; > > > > looks like these should be first converted to actual regulators > > otherwise we will have to maintain this binding forever which means that > > any effort of adding regulator fwk support for menelaus will become a > > lot more difficult because it'll have to cope with the legacy/bogus > > binding. > > I was thinking such conversion could be done with incremental patches... > There's basically only one board (n8x0) that uses this and not likely > to be any others. Is there a way to declare bindings unstable? AFAICT, once they hit a major release, they're stable for life :-)
diff --git a/Documentation/devicetree/bindings/mfd/menelaus.txt b/Documentation/devicetree/bindings/mfd/menelaus.txt new file mode 100644 index 0000000..5f69f23 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/menelaus.txt @@ -0,0 +1,30 @@ +Menelaus (Texas Instruments TWL92330) Power Management chip + +Menelaus provides facilities to control the power resources. + +Required properties: +- compatible: must be "menelaus" +- reg: I2C address of the chip + +Optional properties: +- interrupts: the interrupt +- ti,autosleep: All regulators are put to sleep by default. +- ti,vcore-min-microvolt: Range floor for the HW controlled VCORE +- ti,vcore-max-microvolt: Range roof for the HW controlled VCORE + +The use of ti,autosleep is recommended at least on Nokia N800/N810. + +Example: + +&i2c1 { + clock-frequency = <400000>; + + pmic@72 { + compatible = "menelaus"; + reg = <0x72>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + ti,autosleep; + ti,vcore-min-microvolt = <1050000>; + ti,vcore-max-microvolt = <1400000>; + }; +}; diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c index 917fa86..3e04c64 100644 --- a/drivers/mfd/menelaus.c +++ b/drivers/mfd/menelaus.c @@ -16,6 +16,8 @@ * Amit Kucheria <amit.kucheria@nokia.com> * Copyright (C) 2005, 2006 Nokia Corporation * + * Cleanups and DT modifications by Aaro Koskinen <aaro.koskinen@iki.fi>. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -767,6 +769,22 @@ out: return ret; } +static int menelaus_auto_sleep_regulators(void) +{ + u32 val; + int ret; + + val = EN_VPLL_SLEEP | EN_VMMC_SLEEP | EN_VAUX_SLEEP | EN_VIO_SLEEP | \ + EN_VMEM_SLEEP | EN_DC3_SLEEP | EN_VC_SLEEP | EN_DC2_SLEEP; + ret = menelaus_set_regulator_sleep(1, val); + if (ret < 0) { + dev_err(&the_menelaus->client->dev, + "could not set regulators to sleep: %d\n", ret); + return ret; + } + return 0; +} + /*-----------------------------------------------------------------------*/ /* Handles Menelaus interrupts. Does not run in interrupt context */ @@ -1162,6 +1180,7 @@ static int menelaus_probe(struct i2c_client *client, struct menelaus_chip *menelaus; int rev = 0; int err = 0; + struct device_node *np = client->dev.of_node; struct menelaus_platform_data *menelaus_pdata = dev_get_platdata(&client->dev); @@ -1221,10 +1240,35 @@ static int menelaus_probe(struct i2c_client *client, else menelaus->vcore_hw_mode = 0; - if (menelaus_pdata != NULL && menelaus_pdata->late_init != NULL) { - err = menelaus_pdata->late_init(&client->dev); - if (err < 0) - goto fail; + if (menelaus_pdata != NULL) { + if (menelaus_pdata->late_init != NULL) { + err = menelaus_pdata->late_init(&client->dev); + if (err < 0) + goto fail; + } + } else if (np) { + u32 vcore_min; + u32 vcore_max; + + if (!of_property_read_u32(np, "ti,vcore-min-microvolt", + &vcore_min) && + !of_property_read_u32(np, "ti,vcore-max-microvolt", + &vcore_max)) { + err = menelaus_set_vcore_hw(vcore_max / 1000, + vcore_min / 1000); + if (err < 0) { + dev_err(&client->dev, + "could not set VCORE voltage: %d\n", + err); + goto fail; + } + } + + if (of_property_read_bool(np, "ti,autosleep")) { + err = menelaus_auto_sleep_regulators(); + if (err < 0) + goto fail; + } } menelaus_rtc_init(menelaus);
Add initial DT support. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> --- Documentation/devicetree/bindings/mfd/menelaus.txt | 30 +++++++++++++ drivers/mfd/menelaus.c | 52 ++++++++++++++++++++-- 2 files changed, 78 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/menelaus.txt