Message ID | 1421373430-21915-1-git-send-email-quwenruo@cn.fujitsu.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On Fri, Jan 16, 2015 at 09:57:10AM +0800, Qu Wenruo wrote: > Reported in Red Hat BZ#1181627, 'btrfs fi show' on unmounted device will > return 1 even no error happens. Please describe the bug in the commit message, don't make me have to go look at some web page to work out what you are trying to fix. > Introduced by: commit 2513077f > btrfs-progs: fix device missing of btrfs fi show with seed devices > > Patch fixing it: > https://patchwork.kernel.org/patch/5626001/ > btrfs-progs: Fix wrong return value when executing 'fi show' on > umounted device. What btrfs progs commit introduced and fixed is not actually relevant to fstests. If I have to go read other stuff to understand the change you are making, then the description needs more detail and less external references.... > Reported-by: Vratislav Podzimek <vpodzime@redhat.com> > Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> > --- > tests/btrfs/006 | 51 ++++++++++++++++++++++++++++++++++++++++++++------- > tests/btrfs/006.out | 10 ++++++++++ > 2 files changed, 54 insertions(+), 7 deletions(-) > > diff --git a/tests/btrfs/006 b/tests/btrfs/006 > index 715fd80..2d8c1c0 100755 > --- a/tests/btrfs/006 > +++ b/tests/btrfs/006 > @@ -62,33 +62,70 @@ _scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" > > # These have to be done unmounted...? > echo "== Set filesystem label to $LABEL" > -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL || \ > + _fail "set lable failed" Apart from the typo, why not _run_btrfs_util_prog? However, this will make the test fail on older btrfs progs installations that we previously passing the test just fine, right? IOWs, if you want to test that `btrfs fi show` always returns the correct value, don't add that checking to an existing test: write a new test that tests the validity of the return value.... > echo "== Get filesystem label" > -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV > +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV || \ > + _fail "get lable failed" > + > +echo "== Show filesystem by device(offline)" > +$BTRFS_UTIL_PROG filesystem show $FIRST_POOL_DEV | \ > + _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID > +[ ${PIPESTATUS[0]} -ne 0 ] && \ > + _fail "show filesystem by device(offline) return value wrong" That's a new function being tested. Again, this belongs in a new test, not an existing regression test.... FWIW, Now that I've seen it used a couple of times, I don't really like the mess that checking errors via PIPESTATUS results in, especially as _run_btrfs_util_prog filesystem show $FIRST_POOL_DEV | \ _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID Gives *exactly* the same failure detection.... Cheers, Dave.
-------- Original Message -------- Subject: Re: [PATCH] fstest: btrfs/006: Add extra check on return value and 'fi show' by device From: Dave Chinner <david@fromorbit.com> To: Qu Wenruo <quwenruo@cn.fujitsu.com> Date: 2015?01?21? 12:03 > On Fri, Jan 16, 2015 at 09:57:10AM +0800, Qu Wenruo wrote: >> Reported in Red Hat BZ#1181627, 'btrfs fi show' on unmounted device will >> return 1 even no error happens. > Please describe the bug in the commit message, don't make me have to > go look at some web page to work out what you are trying to fix. OK, I'll make the description more detailed. > >> Introduced by: commit 2513077f >> btrfs-progs: fix device missing of btrfs fi show with seed devices >> >> Patch fixing it: >> https://patchwork.kernel.org/patch/5626001/ >> btrfs-progs: Fix wrong return value when executing 'fi show' on >> umounted device. > What btrfs progs commit introduced and fixed is not actually > relevant to fstests. This just saves some time for some users who failed the test and what to check if the bug is fixed or not. > If I have to go read other stuff to understand > the change you are making, then the description needs more detail > and less external references.... I understand that I need to make the description more detailed. Although external reference does not help much for fstests, but it will really saves time for some tests. Like Fillipe Manana's test, which embedded such info into the test script, saved me a lot of time to find the regression commit. > > >> Reported-by: Vratislav Podzimek <vpodzime@redhat.com> >> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> >> --- >> tests/btrfs/006 | 51 ++++++++++++++++++++++++++++++++++++++++++++------- >> tests/btrfs/006.out | 10 ++++++++++ >> 2 files changed, 54 insertions(+), 7 deletions(-) >> >> diff --git a/tests/btrfs/006 b/tests/btrfs/006 >> index 715fd80..2d8c1c0 100755 >> --- a/tests/btrfs/006 >> +++ b/tests/btrfs/006 >> @@ -62,33 +62,70 @@ _scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" >> >> # These have to be done unmounted...? >> echo "== Set filesystem label to $LABEL" >> -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL >> +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL || \ >> + _fail "set lable failed" > Apart from the typo, why not _run_btrfs_util_prog? Oh thanks a lot for the existing infrastructure. With this one, the PIPESTATUS[] is no longer needed. > > However, this will make the test fail on older btrfs progs > installations that we previously passing the test just fine, right? No, old tests will still pass, since it returns 0 as expected. Add the return values test just in case. > > IOWs, if you want to test that `btrfs fi show` always returns the > correct value, don't add that checking to an existing test: write a > new test that tests the validity of the return value.... OK, creating a new one seems reasonable enough for me. > > >> echo "== Get filesystem label" >> -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV >> +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV || \ >> + _fail "get lable failed" >> + >> +echo "== Show filesystem by device(offline)" >> +$BTRFS_UTIL_PROG filesystem show $FIRST_POOL_DEV | \ >> + _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID >> +[ ${PIPESTATUS[0]} -ne 0 ] && \ >> + _fail "show filesystem by device(offline) return value wrong" > That's a new function being tested. Again, this belongs in a new > test, not an existing regression test.... > > FWIW, Now that I've seen it used a couple of times, I don't really > like the mess that checking errors via PIPESTATUS results in, > especially as > > _run_btrfs_util_prog filesystem show $FIRST_POOL_DEV | \ > _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID > > Gives *exactly* the same failure detection.... Thanks for the _run_btrfs_util_prog macro hint. That's great and makes codes look much nicer. BTW, do I need to cleanup all the $BTRFS_UTIL_PROG in the original test? Thanks, Qu > > Cheers, > > Dave. -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jan 21, 2015 at 12:19:32PM +0800, Qu Wenruo wrote: > From: Dave Chinner <david@fromorbit.com> > >On Fri, Jan 16, 2015 at 09:57:10AM +0800, Qu Wenruo wrote: > >>Reported in Red Hat BZ#1181627, 'btrfs fi show' on unmounted device will > >>return 1 even no error happens. > >Please describe the bug in the commit message, don't make me have to > >go look at some web page to work out what you are trying to fix. > OK, I'll make the description more detailed. > > > >>Introduced by: commit 2513077f > >>btrfs-progs: fix device missing of btrfs fi show with seed devices > >> > >>Patch fixing it: > >>https://patchwork.kernel.org/patch/5626001/ > >>btrfs-progs: Fix wrong return value when executing 'fi show' on > >>umounted device. > >What btrfs progs commit introduced and fixed is not actually > >relevant to fstests. > This just saves some time for some users who failed the test and > what to check if the bug is fixed or not. Doesn't save me time - it takes me much longer as I have to use 3 different tools to follow those three references to try to understand why you are making the change. > >If I have to go read other stuff to understand > >the change you are making, then the description needs more detail > >and less external references.... > I understand that I need to make the description more detailed. > Although external reference does not help much for fstests, but it > will really saves time for some tests. Like Fillipe Manana's > test, which embedded such info into the test script, saved me a > lot of time to find the regression commit. What it helps is people running a new fstests tree on an older distro kernels. It doesn't save time for reviewers, yet reviewer resources are in much scarcer supply than distro QA resources. If you want your changes reviewed faster, then commit messages need to be reviewer friendly. Further, if you review other people's changes, then they are much more likely to review your changes quickly. If the review burden is left to me all the time then, like Andrew Morton, I get grumpy when people say "but it helps me"..... > BTW, do I need to cleanup all the $BTRFS_UTIL_PROG in the original test? Not if it causes older btrfs progs installations to fail. Cheers, Dave.
diff --git a/tests/btrfs/006 b/tests/btrfs/006 index 715fd80..2d8c1c0 100755 --- a/tests/btrfs/006 +++ b/tests/btrfs/006 @@ -62,33 +62,70 @@ _scratch_pool_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" # These have to be done unmounted...? echo "== Set filesystem label to $LABEL" -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL || \ + _fail "set lable failed" echo "== Get filesystem label" -$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV || \ + _fail "get lable failed" + +echo "== Show filesystem by device(offline)" +$BTRFS_UTIL_PROG filesystem show $FIRST_POOL_DEV | \ + _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show filesystem by device(offline) return value wrong" echo "== Mount." _scratch_mount echo "== Show filesystem by label" -$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS +$BTRFS_UTIL_PROG filesystem show $LABEL | \ + _filter_btrfs_filesystem_show $TOTAL_DEVS +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show filesystem by lable return value wrong" UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'` echo "UUID $UUID" >> $seqres.full echo "== Show filesystem by UUID" -$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID +$BTRFS_UTIL_PROG filesystem show $UUID | \ + _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show filesystem by UUID return value wrong" + +echo "== Show filesystem by device(online)" +$BTRFS_UTIL_PROG filesystem show $FIRST_POOL_DEV | \ + _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show filesystem by UUID return value wrong" echo "== Sync filesystem" $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "sync filesystem failed" + echo "== Show device stats by mountpoint" -$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | \ + _filter_btrfs_device_stats $TOTAL_DEVS +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show device status return value wrong" + echo "== Show device stats by first/scratch dev" $BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show device status return value wrong" + echo "== Show device stats by second dev" -$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | \ + sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g" +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show device status return value wrong" + echo "== Show device stats by last dev" -$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | \ + sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g" +[ ${PIPESTATUS[0]} -ne 0 ] && \ + _fail "show device status return value wrong" # success, all done status=0 diff --git a/tests/btrfs/006.out b/tests/btrfs/006.out index 22bcb77..497de67 100644 --- a/tests/btrfs/006.out +++ b/tests/btrfs/006.out @@ -2,6 +2,11 @@ == Set filesystem label to TestLabel.006 == Get filesystem label TestLabel.006 +== Show filesystem by device(offline) +Label: 'TestLabel.006' uuid: <UUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + == Mount. == Show filesystem by label Label: 'TestLabel.006' uuid: <UUID> @@ -13,6 +18,11 @@ Label: 'TestLabel.006' uuid: <EXACTUUID> Total devices <EXACTNUM> FS bytes used <SIZE> devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV +== Show filesystem by device(online) +Label: 'TestLabel.006' uuid: <EXACTUUID> + Total devices <EXACTNUM> FS bytes used <SIZE> + devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV + == Sync filesystem FSSync 'SCRATCH_MNT' == Show device stats by mountpoint
Reported in Red Hat BZ#1181627, 'btrfs fi show' on unmounted device will return 1 even no error happens. Introduced by: commit 2513077f btrfs-progs: fix device missing of btrfs fi show with seed devices Patch fixing it: https://patchwork.kernel.org/patch/5626001/ btrfs-progs: Fix wrong return value when executing 'fi show' on umounted device. Reported-by: Vratislav Podzimek <vpodzime@redhat.com> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> --- tests/btrfs/006 | 51 ++++++++++++++++++++++++++++++++++++++++++++------- tests/btrfs/006.out | 10 ++++++++++ 2 files changed, 54 insertions(+), 7 deletions(-)