@@ -316,6 +316,7 @@ config CHARGER_GPIO
config CHARGER_MANAGER
bool "Battery charger manager for multiple chargers"
depends on REGULATOR
+ depends on THERMAL
select EXTCON
help
Say Y to enable charger-manager support, which allows multiple
@@ -28,13 +28,6 @@
#include <linux/of.h>
#include <linux/thermal.h>
-/*
- * Default termperature threshold for charging.
- * Every temperature units are in tenth of centigrade.
- */
-#define CM_DEFAULT_RECHARGE_TEMP_DIFF 50
-#define CM_DEFAULT_CHARGE_TEMP_MAX 500
-
static const char * const default_event_names[] = {
[CM_EVENT_UNKNOWN] = "Unknown",
[CM_EVENT_BATT_FULL] = "Battery Full",
@@ -572,40 +565,18 @@ static int check_charging_duration(struct charger_manager *cm)
return ret;
}
-static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
- int *temp)
-{
- struct power_supply *fuel_gauge;
-
- fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
- if (!fuel_gauge)
- return -ENODEV;
-
- return fuel_gauge->get_property(fuel_gauge,
- POWER_SUPPLY_PROP_TEMP,
- (union power_supply_propval *)temp);
-}
-
static int cm_get_battery_temperature(struct charger_manager *cm,
int *temp)
{
int ret;
- if (!cm->desc->measure_battery_temp)
+ if (!cm->tzd_batt)
return -ENODEV;
-#ifdef CONFIG_THERMAL
- if (cm->tzd_batt) {
- ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
- if (!ret)
- /* Calibrate temperature unit */
- *temp /= 100;
- } else
-#endif
- {
- /* if-else continued from CONFIG_THERMAL */
- ret = cm_get_battery_temperature_by_psy(cm, temp);
- }
+ ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
+ if (!ret)
+ /* Calibrate temperature unit */
+ *temp /= 100;
return ret;
}
@@ -1007,12 +978,11 @@ static enum power_supply_property default_charger_props[] = {
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
/*
* Optional properties are:
* POWER_SUPPLY_PROP_CHARGE_NOW,
* POWER_SUPPLY_PROP_CURRENT_NOW,
- * POWER_SUPPLY_PROP_TEMP, and
- * POWER_SUPPLY_PROP_TEMP_AMBIENT,
*/
};
@@ -1417,49 +1387,6 @@ err:
return ret;
}
-static int cm_init_thermal_data(struct charger_manager *cm,
- struct power_supply *fuel_gauge)
-{
- struct charger_desc *desc = cm->desc;
- union power_supply_propval val;
- int ret;
-
- /* Verify whether fuel gauge provides battery temperature */
- ret = fuel_gauge->get_property(fuel_gauge,
- POWER_SUPPLY_PROP_TEMP, &val);
-
- if (!ret) {
- cm->charger_psy.properties[cm->charger_psy.num_properties] =
- POWER_SUPPLY_PROP_TEMP;
- cm->charger_psy.num_properties++;
- cm->desc->measure_battery_temp = true;
- }
-#ifdef CONFIG_THERMAL
- if (ret && desc->thermal_zone) {
- cm->tzd_batt =
- thermal_zone_get_zone_by_name(desc->thermal_zone);
- if (IS_ERR(cm->tzd_batt))
- return PTR_ERR(cm->tzd_batt);
-
- /* Use external thermometer */
- cm->charger_psy.properties[cm->charger_psy.num_properties] =
- POWER_SUPPLY_PROP_TEMP_AMBIENT;
- cm->charger_psy.num_properties++;
- cm->desc->measure_battery_temp = true;
- ret = 0;
- }
-#endif
- if (cm->desc->measure_battery_temp) {
- /* NOTICE : Default allowable minimum charge temperature is 0 */
- if (!desc->temp_max)
- desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX;
- if (!desc->temp_diff)
- desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF;
- }
-
- return ret;
-}
-
static struct of_device_id charger_manager_match[] = {
{
.compatible = "charger-manager",
@@ -1474,6 +1401,7 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
u32 poll_mode = CM_POLL_DISABLE;
u32 battery_stat = CM_NO_BATTERY;
int num_chgs = 0;
+ bool monitor_temp = false;
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
if (!desc)
@@ -1517,14 +1445,16 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge);
- of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone);
-
- of_property_read_u32(np, "cm-battery-cold", &desc->temp_min);
- if (of_get_property(np, "cm-battery-cold-in-minus", NULL))
- desc->temp_min *= -1;
- of_property_read_u32(np, "cm-battery-hot", &desc->temp_max);
+ if (!of_property_read_u32(np, "cm-battery-cold", &desc->temp_min))
+ monitor_temp = true;
+ if (!of_property_read_u32(np, "cm-battery-hot", &desc->temp_max))
+ monitor_temp = true;
of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff);
+ if (monitor_temp && of_property_read_string(np,
+ "cm-thermal-zone", &desc->thermal_zone))
+ desc->thermal_zone = desc->psy_fuel_gauge;
+
of_property_read_u32(np, "cm-charging-max",
&desc->charging_max_duration_ms);
of_property_read_u32(np, "cm-discharging-max",
@@ -1733,7 +1663,16 @@ static int charger_manager_probe(struct platform_device *pdev)
cm->charger_psy.num_properties++;
}
- ret = cm_init_thermal_data(cm, fuel_gauge);
+ if (desc->thermal_zone) {
+ cm->tzd_batt =
+ thermal_zone_get_zone_by_name(desc->thermal_zone);
+ if (!cm->tzd_batt) {
+ pr_err("Failed to get thermal zone (%s).\n",
+ desc->thermal_zone);
+ return -ENODEV;
+ }
+ }
+
if (ret) {
dev_err(&pdev->dev, "Failed to initialize thermal data\n");
cm->desc->measure_battery_temp = false;
@@ -231,9 +231,8 @@ struct charger_manager {
struct device *dev;
struct charger_desc *desc;
-#ifdef CONFIG_THERMAL
struct thermal_zone_device *tzd_batt;
-#endif
+
bool charger_enabled;
unsigned long fullbatt_vchk_jiffies_at;
It drops the way of using power_supply interface to reference battery's temperature. Then it tries to use thermal subsystem's only. This makes driver more simple and also can remove ifdeferies. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> --- drivers/power/Kconfig | 1 + drivers/power/charger-manager.c | 111 ++++++++------------------------- include/linux/power/charger-manager.h | 3 +- 3 files changed, 27 insertions(+), 88 deletions(-)