| Message ID | 201501241300.00723@pali (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Saturday 24 January 2015 13:00:00 Pali Rohár wrote: > > Another regression for DT setup (which does not occur for board code): > > omap_hsmmc driver does not export slot_name sysfs entry because > it not supported by DT yet. Entry slot_name is used by userspace > application to determinate if mmc block device is internal eMMC > memory or external uSD card. So support for this property also in > DT is needed. > > Here is simple patch which fix this problem: > The sysfs file only exists for the two OMAP drivers, and the naming is used only by board-n8x0, board-rx51 and board-omap3logic. It may be better to add a board-specific hack for these to keep the existing user space working but not spread the use of this file anywhere else. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday 24 January 2015 23:08:00 Arnd Bergmann wrote: > On Saturday 24 January 2015 13:00:00 Pali Rohár wrote: > > Another regression for DT setup (which does not occur for > > board code): > > > > omap_hsmmc driver does not export slot_name sysfs entry > > because it not supported by DT yet. Entry slot_name is used > > by userspace application to determinate if mmc block device > > is internal eMMC memory or external uSD card. So support > > for this property also in DT is needed. > > > Here is simple patch which fix this problem: > The sysfs file only exists for the two OMAP drivers, and the > naming is used only by board-n8x0, board-rx51 and > board-omap3logic. > > It may be better to add a board-specific hack for these to > keep the existing user space working but not spread the use > of this file anywhere else. > > Arnd Why? omap_hsmmc.c has already support for slot_name sysfs entry, just it is not filled from DT data (only from platform_data)...
On Sat, Jan 24, 2015 at 01:00:00PM +0100, Pali Rohár wrote: > Another regression for DT setup (which does not occur for board code): > > omap_hsmmc driver does not export slot_name sysfs entry because > it not supported by DT yet. Entry slot_name is used by userspace > application to determinate if mmc block device is internal eMMC > memory or external uSD card. So support for this property also in > DT is needed. > > Here is simple patch which fix this problem: > > diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > index 8571027..31ca609 100644 > --- a/arch/arm/boot/dts/omap3-n900.dts > +++ b/arch/arm/boot/dts/omap3-n900.dts > @@ -665,6 +665,7 @@ > }; > > &mmc1 { > + slot-name = "external"; > pinctrl-names = "default"; > pinctrl-0 = <&mmc1_pins>; > vmmc-supply = <&vmmc1>; > @@ -674,6 +675,7 @@ > > /* most boards use vaux3, only some old versions use vmmc2 instead */ > &mmc2 { > + slot-name = "internal"; > pinctrl-names = "default"; > pinctrl-0 = <&mmc2_pins>; > vmmc-supply = <&vaux3>; > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index 7c71dcd..cd189eb 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -2021,6 +2021,8 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev) > if (of_find_property(np, "enable-sdio-wakeup", NULL)) > pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; > > + of_property_read_string(np, "slot-name", &pdata->name); > + > return pdata; > } > #else I suggest to use "label" as DT property name, which is also used for labeling GPIOs, LEDs, partitions, ... in DT. -- Sebastian
On Sat 2015-01-24 13:00:00, Pali Rohár wrote: > On Thursday 15 January 2015 15:25:36 Sebastian Reichel wrote: > > On Tue, Jan 13, 2015 at 12:42:20PM -0800, Tony Lindgren wrote: > > > * Arnd Bergmann <arnd@arndb.de> [150113 12:27]: > > > > On Tuesday 13 January 2015 09:57:41 Tony Lindgren wrote: > > > > > It seems we can now drop omap3517 legacy booting support > > > > > to get a bit closer to making all of omap3 boot in > > > > > device tree only mode. > > > > > > > > > > All these boards have at least minimal support for > > > > > booting with device tree, and pretty much anything > > > > > supported with the legacy board files can be configured > > > > > also for device tree based booting if not done already. > > > > > > > > Ah, very nice. > > > > > > > > Just out of curiosity, what are the remaining showstoppers > > > > for the 3430 and 3530 based boards? > > > > > > Not much really. We're now printing a warning to get a > > > people to upgrade their systems. So with some boards we > > > need to wait a while. > > > > > > Then here are the remaining items that I'm aware of: > > > > > > - A regression at least on some n900 with appended DTB not > > > booting > > > > > > properly any longer reported by Pali > > > > > > - A regression where the legacy ATAGs don't seem to get > > > properly > > > > > > translated by the uncompress code for atag_rev at least > > > reported by Pali > > > > > > - A few missing .dts files for devkit8000, omap3logic, > > > omap3stalker, > > > > > > omap3pandora and omap3touchbook > > > > > > Pali and Sebastian probably know best of any other remaining > > > issues to drop n900 legacy booting. > > > > Apart from the bugs there is only one feature-wise regression > > when the system is booted via DT, which is the accelerometer. > > I will (re)send patches for that in the next days. > > > > -- Sebastian > > Another regression for DT setup (which does not occur for board code): > > omap_hsmmc driver does not export slot_name sysfs entry because > it not supported by DT yet. Entry slot_name is used by userspace > application to determinate if mmc block device is internal eMMC > memory or external uSD card. So support for this property also in > DT is needed. > > Here is simple patch which fix this problem: Thanks! Does it need line into Documentation/devicetree/ somewhere? With that, Acked-by: Pavel Machek <pavel@ucw.cz> Pavel
On Sat 2015-01-24 23:08:00, Arnd Bergmann wrote: > On Saturday 24 January 2015 13:00:00 Pali Rohár wrote: > > > > Another regression for DT setup (which does not occur for board code): > > > > omap_hsmmc driver does not export slot_name sysfs entry because > > it not supported by DT yet. Entry slot_name is used by userspace > > application to determinate if mmc block device is internal eMMC > > memory or external uSD card. So support for this property also in > > DT is needed. > > > > Here is simple patch which fix this problem: > > > > The sysfs file only exists for the two OMAP drivers, and the naming > is used only by board-n8x0, board-rx51 and board-omap3logic. > > It may be better to add a board-specific hack for these to keep the > existing user space working but not spread the use of this file anywhere > else. I'd guess this is going to be useful on more than just n900, and thus is worth supporting generically... Pavel
On Sun, Jan 25, 2015 at 10:22:58PM +0100, Pavel Machek wrote: > > Another regression for DT setup (which does not occur for board code): > > > > omap_hsmmc driver does not export slot_name sysfs entry because > > it not supported by DT yet. Entry slot_name is used by userspace > > application to determinate if mmc block device is internal eMMC > > memory or external uSD card. So support for this property also in > > DT is needed. > > > > Here is simple patch which fix this problem: > > Thanks! > > Does it need line into Documentation/devicetree/ somewhere? Documentation/devicetree/bindings/mmc/mmc.txt (generic) Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt (omap specific) -- Sebastian
On Saturday 24 January 2015 23:14:58 Pali Rohár wrote: > On Saturday 24 January 2015 23:08:00 Arnd Bergmann wrote: > > On Saturday 24 January 2015 13:00:00 Pali Rohár wrote: > > > Another regression for DT setup (which does not occur for > > > board code): > > > > > > omap_hsmmc driver does not export slot_name sysfs entry > > > because it not supported by DT yet. Entry slot_name is used > > > by userspace application to determinate if mmc block device > > > is internal eMMC memory or external uSD card. So support > > > for this property also in DT is needed. > > > > > Here is simple patch which fix this problem: > > The sysfs file only exists for the two OMAP drivers, and the > > naming is used only by board-n8x0, board-rx51 and > > board-omap3logic. > > > > It may be better to add a board-specific hack for these to > > keep the existing user space working but not spread the use > > of this file anywhere else. > > Why? omap_hsmmc.c has already support for slot_name sysfs entry, > just it is not filled from DT data (only from platform_data)... It's a highly nonstandard interface, none of the other controllers support it, and even changing the the other omap machines to use the same strings might break existing user space that might rely on whatever gets printed in those properties today. We should limit the use of those strings to the boards that are known to run software that requires them to avoid regressions. We could also define a standard way of finding out whether an mmc device is removable. We already have the MMC_CAP_NONREMOVABLE flag in the kernel and could have a read-only boolean attribute in sysfs for it. Putting a "name" property into DT because some random user space requires a particular name to show up in sysfs however does not seem a legitimate hardware description. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 8571027..31ca609 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -665,6 +665,7 @@ }; &mmc1 { + slot-name = "external"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; @@ -674,6 +675,7 @@ /* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { + slot-name = "internal"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&vaux3>; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 7c71dcd..cd189eb 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2021,6 +2021,8 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev) if (of_find_property(np, "enable-sdio-wakeup", NULL)) pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + of_property_read_string(np, "slot-name", &pdata->name); + return pdata; } #else