Message ID | 1423850799-4028-1-git-send-email-sboyd@codeaurora.org (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Simon Horman |
Headers | show |
Hi Stephen, On Fri, Feb 13, 2015 at 10:06:39AM -0800, Stephen Boyd wrote: > Writes to /sys/.../cpuX/online fail if we determine the platform > doesn't support hotplug for that CPU. Furthermore, if the cpu_die > op isn't specified the system hangs when we try to offline a CPU > and it comes right back online unexpectedly. Let's figure this > stuff out before we make the sysfs nodes so that the online file > doesn't even exist if it isn't (at least sometimes) possible to > hotplug the CPU. > > We re-purpose the cpu_disable smp op here and rename it to > cpu_can_disable because all users use the op to indicate if a CPU > can be hotplugged or not in a static fashion. With PSCI we may > need to reintroduce the cpu_disable op so that the secure OS can > be migrated off the CPU we're trying to hotplug. We'll need to > indicate that all CPUs are hotpluggable in that case but this > shouldn't be any worse than something like x86 where we indicate > that all CPUs are hotpluggable but occasionally we can't offline > a CPU due to check_irq_vectors_for_cpu_disable(). > > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Nicolas Pitre <nico@linaro.org> > Cc: Dave Martin <Dave.Martin@arm.com> > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: <linux-sh@vger.kernel.org> > Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [snip] > diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c > index 3923e09e966d..a614cef18db1 100644 > --- a/arch/arm/mach-shmobile/platsmp.c > +++ b/arch/arm/mach-shmobile/platsmp.c > @@ -31,8 +31,8 @@ void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg) > } > > #ifdef CONFIG_HOTPLUG_CPU > -int shmobile_smp_cpu_disable(unsigned int cpu) > +int shmobile_smp_cpu_can_disable(unsigned int cpu) > { > - return 0; /* Hotplug of any CPU is supported */ > + return 1; /* Hotplug of any CPU is supported */ > } > #endif > diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c > index 3f761f839043..b45206f93ddf 100644 > --- a/arch/arm/mach-shmobile/smp-r8a7779.c > +++ b/arch/arm/mach-shmobile/smp-r8a7779.c > @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) > > return 0; > } > - > -static int r8a7779_cpu_disable(unsigned int cpu) > -{ > - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ > - return cpu == 0 ? -EPERM : 0; > -} > #endif /* CONFIG_HOTPLUG_CPU */ > > struct smp_operations r8a7779_smp_ops __initdata = { > .smp_prepare_cpus = r8a7779_smp_prepare_cpus, > .smp_boot_secondary = r8a7779_boot_secondary, > #ifdef CONFIG_HOTPLUG_CPU > - .cpu_disable = r8a7779_cpu_disable, > .cpu_die = shmobile_smp_scu_cpu_die, > .cpu_kill = r8a7779_cpu_kill, > #endif Its not clear to me why r8a7779_cpu_disable() has been removed rather than replaced by r8a7779_cpu_can_disable() -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/13/15 12:20, Simon Horman wrote: > Hi Stephen, > > On Fri, Feb 13, 2015 at 10:06:39AM -0800, Stephen Boyd wrote: >> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c >> index 3f761f839043..b45206f93ddf 100644 >> --- a/arch/arm/mach-shmobile/smp-r8a7779.c >> +++ b/arch/arm/mach-shmobile/smp-r8a7779.c >> @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) >> >> return 0; >> } >> - >> -static int r8a7779_cpu_disable(unsigned int cpu) >> -{ >> - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ >> - return cpu == 0 ? -EPERM : 0; >> -} >> #endif /* CONFIG_HOTPLUG_CPU */ >> >> struct smp_operations r8a7779_smp_ops __initdata = { >> .smp_prepare_cpus = r8a7779_smp_prepare_cpus, >> .smp_boot_secondary = r8a7779_boot_secondary, >> #ifdef CONFIG_HOTPLUG_CPU >> - .cpu_disable = r8a7779_cpu_disable, >> .cpu_die = shmobile_smp_scu_cpu_die, >> .cpu_kill = r8a7779_cpu_kill, >> #endif > Its not clear to me why r8a7779_cpu_disable() has been > removed rather than replaced by r8a7779_cpu_can_disable() By default ARM's smp.c assumes that CPU0 can't be hotplugged. The function is redundant. I guess I should have mentioned that in the commit text.
Hi Stephen, On Fri, Feb 13, 2015 at 8:23 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: > On 02/13/15 12:20, Simon Horman wrote: >> Hi Stephen, >> >> On Fri, Feb 13, 2015 at 10:06:39AM -0800, Stephen Boyd wrote: >>> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c >>> index 3f761f839043..b45206f93ddf 100644 >>> --- a/arch/arm/mach-shmobile/smp-r8a7779.c >>> +++ b/arch/arm/mach-shmobile/smp-r8a7779.c >>> @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) >>> >>> return 0; >>> } >>> - >>> -static int r8a7779_cpu_disable(unsigned int cpu) >>> -{ >>> - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ >>> - return cpu == 0 ? -EPERM : 0; >>> -} >>> #endif /* CONFIG_HOTPLUG_CPU */ >>> >>> struct smp_operations r8a7779_smp_ops __initdata = { >>> .smp_prepare_cpus = r8a7779_smp_prepare_cpus, >>> .smp_boot_secondary = r8a7779_boot_secondary, >>> #ifdef CONFIG_HOTPLUG_CPU >>> - .cpu_disable = r8a7779_cpu_disable, >>> .cpu_die = shmobile_smp_scu_cpu_die, >>> .cpu_kill = r8a7779_cpu_kill, >>> #endif >> Its not clear to me why r8a7779_cpu_disable() has been >> removed rather than replaced by r8a7779_cpu_can_disable() > > By default ARM's smp.c assumes that CPU0 can't be hotplugged. The > function is redundant. I guess I should have mentioned that in the > commit text. Thanks for your efforts. Can you please tell me where that limitation is located? I'm quite sure I've brought CPU cores up and down including CPU0, but maybe something is missing? Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/13/15 12:54, Magnus Damm wrote: > Hi Stephen, > > On Fri, Feb 13, 2015 at 8:23 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: >> On 02/13/15 12:20, Simon Horman wrote: >>> Hi Stephen, >>> >>> On Fri, Feb 13, 2015 at 10:06:39AM -0800, Stephen Boyd wrote: >>>> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c >>>> index 3f761f839043..b45206f93ddf 100644 >>>> --- a/arch/arm/mach-shmobile/smp-r8a7779.c >>>> +++ b/arch/arm/mach-shmobile/smp-r8a7779.c >>>> @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) >>>> >>>> return 0; >>>> } >>>> - >>>> -static int r8a7779_cpu_disable(unsigned int cpu) >>>> -{ >>>> - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ >>>> - return cpu == 0 ? -EPERM : 0; >>>> -} >>>> #endif /* CONFIG_HOTPLUG_CPU */ >>>> >>>> struct smp_operations r8a7779_smp_ops __initdata = { >>>> .smp_prepare_cpus = r8a7779_smp_prepare_cpus, >>>> .smp_boot_secondary = r8a7779_boot_secondary, >>>> #ifdef CONFIG_HOTPLUG_CPU >>>> - .cpu_disable = r8a7779_cpu_disable, >>>> .cpu_die = shmobile_smp_scu_cpu_die, >>>> .cpu_kill = r8a7779_cpu_kill, >>>> #endif >>> Its not clear to me why r8a7779_cpu_disable() has been >>> removed rather than replaced by r8a7779_cpu_can_disable() >> By default ARM's smp.c assumes that CPU0 can't be hotplugged. The >> function is redundant. I guess I should have mentioned that in the >> commit text. > Thanks for your efforts. Can you please tell me where that limitation > is located? I'm quite sure I've brought CPU cores up and down > including CPU0, but maybe something is missing? > > The assumption is made if there isn't a cpu_disable (now cpu_can_disable) op. See platform_cpu_disable() in arch/arm/kernel/smp.c. If there isn't such a limitation on a particular platform, the platform needs to set the cpu_disable/cpu_can_disable op and indicate that there isn't a limitation (by returning 1 for example).
Hi Stephen, On Fri, Feb 13, 2015 at 8:59 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: > On 02/13/15 12:54, Magnus Damm wrote: >> Hi Stephen, >> >> On Fri, Feb 13, 2015 at 8:23 PM, Stephen Boyd <sboyd@codeaurora.org> wrote: >>> On 02/13/15 12:20, Simon Horman wrote: >>>> Hi Stephen, >>>> >>>> On Fri, Feb 13, 2015 at 10:06:39AM -0800, Stephen Boyd wrote: >>>>> diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c >>>>> index 3f761f839043..b45206f93ddf 100644 >>>>> --- a/arch/arm/mach-shmobile/smp-r8a7779.c >>>>> +++ b/arch/arm/mach-shmobile/smp-r8a7779.c >>>>> @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) >>>>> >>>>> return 0; >>>>> } >>>>> - >>>>> -static int r8a7779_cpu_disable(unsigned int cpu) >>>>> -{ >>>>> - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ >>>>> - return cpu == 0 ? -EPERM : 0; >>>>> -} >>>>> #endif /* CONFIG_HOTPLUG_CPU */ >>>>> >>>>> struct smp_operations r8a7779_smp_ops __initdata = { >>>>> .smp_prepare_cpus = r8a7779_smp_prepare_cpus, >>>>> .smp_boot_secondary = r8a7779_boot_secondary, >>>>> #ifdef CONFIG_HOTPLUG_CPU >>>>> - .cpu_disable = r8a7779_cpu_disable, >>>>> .cpu_die = shmobile_smp_scu_cpu_die, >>>>> .cpu_kill = r8a7779_cpu_kill, >>>>> #endif >>>> Its not clear to me why r8a7779_cpu_disable() has been >>>> removed rather than replaced by r8a7779_cpu_can_disable() >>> By default ARM's smp.c assumes that CPU0 can't be hotplugged. The >>> function is redundant. I guess I should have mentioned that in the >>> commit text. >> Thanks for your efforts. Can you please tell me where that limitation >> is located? I'm quite sure I've brought CPU cores up and down >> including CPU0, but maybe something is missing? >> >> > > The assumption is made if there isn't a cpu_disable (now > cpu_can_disable) op. See platform_cpu_disable() in > arch/arm/kernel/smp.c. If there isn't such a limitation on a particular > platform, the platform needs to set the cpu_disable/cpu_can_disable op > and indicate that there isn't a limitation (by returning 1 for example). Thanks, I now understand. The mach-shmobile bits look fine to me, but if I could pick freely then I would prefer the changes to be broken out a bit more. For instance, separate the r8a7779_cpu_disable() removal from the callback renaming and the logic changes. Also, based on the comment in mcpm_cpu_can_disable() it looks like the PSCI hook may be executed once only with your change in place? Hopefully PSCI is OK not being invoked for every CPU shutdown. Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 13, 2015 at 03:20:04PM -0500, Simon Horman wrote: > > -static int r8a7779_cpu_disable(unsigned int cpu) > > -{ > > - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ > > - return cpu == 0 ? -EPERM : 0; > > -} ... > Its not clear to me why r8a7779_cpu_disable() has been > removed rather than replaced by r8a7779_cpu_can_disable() This is the default if you don't provide a cpu_disable function, so it should be removed irrespective of this patch.
On Fri, Feb 13, 2015 at 08:54:22PM +0000, Magnus Damm wrote: > Thanks for your efforts. Can you please tell me where that limitation > is located? I'm quite sure I've brought CPU cores up and down > including CPU0, but maybe something is missing? If you don't provide a cpu_disable function, by default only the non-boot (iow, non-CPU0) CPUs can be hotplugged. If you provide a cpu_disable function, it can instruct the system that fewer or more CPUs can be hotplugged, including the boot CPU. The system will then restrict you to a minimum of any one CPU online.
On Fri, Feb 13, 2015 at 09:44:50PM +0000, Magnus Damm wrote: > Also, based on the comment in mcpm_cpu_can_disable() it looks like the > PSCI hook may be executed once only with your change in place? > Hopefully PSCI is OK not being invoked for every CPU shutdown. This is why I've said (in the parent thread) that I'm not happy to apply this patch. Mark Rutland has indicated that he has MCPM cases where the CPUs which can be disabled changes dynamically according to the secure firmware requirements, and ripping out todays infrastructure in light of that, only to have to add it back again later makes no sense. However, cleaning things up by removing unnecessary cpu_disable methods is a good thing to do irrespective of that.
On Fri, Feb 13, 2015 at 10:57:04PM +0000, Russell King - ARM Linux wrote: > On Fri, Feb 13, 2015 at 03:20:04PM -0500, Simon Horman wrote: > > > -static int r8a7779_cpu_disable(unsigned int cpu) > > > -{ > > > - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ > > > - return cpu == 0 ? -EPERM : 0; > > > -} > ... > > Its not clear to me why r8a7779_cpu_disable() has been > > removed rather than replaced by r8a7779_cpu_can_disable() > > This is the default if you don't provide a cpu_disable function, so it > should be removed irrespective of this patch. Thanks and agreed. I'd be quite happy to take such a patch through my tree. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/13/15 15:01, Russell King - ARM Linux wrote: > On Fri, Feb 13, 2015 at 09:44:50PM +0000, Magnus Damm wrote: >> Also, based on the comment in mcpm_cpu_can_disable() it looks like the >> PSCI hook may be executed once only with your change in place? >> Hopefully PSCI is OK not being invoked for every CPU shutdown. > This is why I've said (in the parent thread) that I'm not happy to > apply this patch. Mark Rutland has indicated that he has MCPM cases > where the CPUs which can be disabled changes dynamically according > to the secure firmware requirements, and ripping out todays > infrastructure in light of that, only to have to add it back again > later makes no sense. Putting it back is not hard. And the infrastructure is not currently used for these purposes so renaming it is appropriate. I can leave it in place if you like, i.e. make a new op for cpu_can_disable and repoint mcpm's mcpm_cpu_disable() at it. Then when mcpm gets migrate support it can actually implement a cpu_disable op. > > However, cleaning things up by removing unnecessary cpu_disable > methods is a good thing to do irrespective of that. > That's fine I can split it out.
Hi Russell, On Fri, Feb 13, 2015 at 11:01 PM, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote: > On Fri, Feb 13, 2015 at 09:44:50PM +0000, Magnus Damm wrote: >> Also, based on the comment in mcpm_cpu_can_disable() it looks like the >> PSCI hook may be executed once only with your change in place? >> Hopefully PSCI is OK not being invoked for every CPU shutdown. > > This is why I've said (in the parent thread) that I'm not happy to > apply this patch. Mark Rutland has indicated that he has MCPM cases > where the CPUs which can be disabled changes dynamically according > to the secure firmware requirements, and ripping out todays > infrastructure in light of that, only to have to add it back again > later makes no sense. > > However, cleaning things up by removing unnecessary cpu_disable > methods is a good thing to do irrespective of that. I completely agree! Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Feb 13, 2015 at 11:01:37PM +0000, Russell King - ARM Linux wrote: > On Fri, Feb 13, 2015 at 09:44:50PM +0000, Magnus Damm wrote: > > Also, based on the comment in mcpm_cpu_can_disable() it looks like the > > PSCI hook may be executed once only with your change in place? > > Hopefully PSCI is OK not being invoked for every CPU shutdown. > > This is why I've said (in the parent thread) that I'm not happy to > apply this patch. Mark Rutland has indicated that he has MCPM cases > where the CPUs which can be disabled changes dynamically according > to the secure firmware requirements, and ripping out todays > infrastructure in light of that, only to have to add it back again > later makes no sense. To clarify, PSCI and MCPM are unrelated. It was originally conceived that MCPM would use PSCI as a backend, but it turns out that they're effectively mutually exclusive, and are handled separately. I still want to add support for MIGRATE in the PSCI client code, but this is independent of MCPM. In some cases it's possible to determine at boot time that a CPU cannot be hotplugged (e.g. in PSCI if the TOS is non-migrateable), so having separate hooks for determining that static and dynamic ability to hotplug a CPU sounds reasonable to me. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c index 92e54d7c6f46..dc91ed04c25a 100644 --- a/arch/arm/common/mcpm_platsmp.c +++ b/arch/arm/common/mcpm_platsmp.c @@ -65,14 +65,10 @@ static int mcpm_cpu_kill(unsigned int cpu) return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster); } -static int mcpm_cpu_disable(unsigned int cpu) +static int mcpm_cpu_can_disable(unsigned int cpu) { - /* - * We assume all CPUs may be shut down. - * This would be the hook to use for eventual Secure - * OS migration requests as described in the PSCI spec. - */ - return 0; + /* We assume all CPUs may be shut down. */ + return 1; } static void mcpm_cpu_die(unsigned int cpu) @@ -92,7 +88,7 @@ static struct smp_operations __initdata mcpm_smp_ops = { .smp_secondary_init = mcpm_secondary_init, #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = mcpm_cpu_kill, - .cpu_disable = mcpm_cpu_disable, + .cpu_can_disable = mcpm_cpu_can_disable, .cpu_die = mcpm_cpu_die, #endif }; diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 18f5a554134f..835a643f2a8e 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -104,7 +104,7 @@ struct smp_operations { #ifdef CONFIG_HOTPLUG_CPU int (*cpu_kill)(unsigned int cpu); void (*cpu_die)(unsigned int cpu); - int (*cpu_disable)(unsigned int cpu); + int (*cpu_can_disable)(unsigned int cpu); #endif #endif }; @@ -123,4 +123,13 @@ struct of_cpu_method { */ extern void smp_set_ops(struct smp_operations *); +#ifdef CONFIG_HOTPLUG_CPU +extern int platform_can_hotplug_cpu(unsigned int cpu); +#else +static inline int platform_can_hotplug_cpu(unsigned int cpu) +{ + return 0; +} +#endif + #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 715ae19bc7c8..c61c09defc78 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -974,7 +974,7 @@ static int __init topology_init(void) for_each_possible_cpu(cpu) { struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu); - cpuinfo->cpu.hotpluggable = 1; + cpuinfo->cpu.hotpluggable = platform_can_hotplug_cpu(cpu); register_cpu(&cpuinfo->cpu, cpu); } diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index fe0386c751b2..160aa14c4a75 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -174,29 +174,29 @@ static int platform_cpu_kill(unsigned int cpu) return 1; } -static int platform_cpu_disable(unsigned int cpu) +int platform_can_hotplug_cpu(unsigned int cpu) { - if (smp_ops.cpu_disable) - return smp_ops.cpu_disable(cpu); + /* cpu_die must be specified to support hotplug */ + if (!smp_ops.cpu_die) + return 0; + + if (smp_ops.cpu_can_disable) + return smp_ops.cpu_can_disable(cpu); /* * By default, allow disabling all CPUs except the first one, * since this is special on a lot of platforms, e.g. because * of clock tick interrupts. */ - return cpu == 0 ? -EPERM : 0; + return cpu == 0 ? 0 : 1; } + /* * __cpu_disable runs on the processor to be shutdown. */ int __cpu_disable(void) { unsigned int cpu = smp_processor_id(); - int ret; - - ret = platform_cpu_disable(cpu); - if (ret) - return ret; /* * Take this CPU offline. Once we clear this, we can't return, diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 309025efd4cf..e124df267edc 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -13,7 +13,7 @@ extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); -extern int shmobile_smp_cpu_disable(unsigned int cpu); +extern int shmobile_smp_cpu_can_disable(unsigned int cpu); extern void shmobile_invalidate_start(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 3923e09e966d..a614cef18db1 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -31,8 +31,8 @@ void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg) } #ifdef CONFIG_HOTPLUG_CPU -int shmobile_smp_cpu_disable(unsigned int cpu) +int shmobile_smp_cpu_can_disable(unsigned int cpu) { - return 0; /* Hotplug of any CPU is supported */ + return 1; /* Hotplug of any CPU is supported */ } #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 3f761f839043..b45206f93ddf 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -124,19 +124,12 @@ static int r8a7779_cpu_kill(unsigned int cpu) return 0; } - -static int r8a7779_cpu_disable(unsigned int cpu) -{ - /* only CPU1->3 have power domains, do not allow hotplug of CPU0 */ - return cpu == 0 ? -EPERM : 0; -} #endif /* CONFIG_HOTPLUG_CPU */ struct smp_operations r8a7779_smp_ops __initdata = { .smp_prepare_cpus = r8a7779_smp_prepare_cpus, .smp_boot_secondary = r8a7779_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = r8a7779_cpu_disable, .cpu_die = shmobile_smp_scu_cpu_die, .cpu_kill = r8a7779_cpu_kill, #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c index 9c3da1345b8b..67b86c434fb8 100644 --- a/arch/arm/mach-shmobile/smp-r8a7790.c +++ b/arch/arm/mach-shmobile/smp-r8a7790.c @@ -63,7 +63,7 @@ struct smp_operations r8a7790_smp_ops __initdata = { .smp_prepare_cpus = r8a7790_smp_prepare_cpus, .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = shmobile_smp_cpu_disable, + .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, .cpu_kill = shmobile_smp_apmu_cpu_kill, #endif diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 7e49e0a52e32..24b7f12e20bb 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -58,7 +58,7 @@ struct smp_operations r8a7791_smp_ops __initdata = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = shmobile_smp_cpu_disable, + .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_apmu_cpu_die, .cpu_kill = shmobile_smp_apmu_cpu_kill, #endif diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index c16dbfe9836c..4dddbd3844dd 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -68,7 +68,7 @@ struct smp_operations sh73a0_smp_ops __initdata = { .smp_prepare_cpus = sh73a0_smp_prepare_cpus, .smp_boot_secondary = sh73a0_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU - .cpu_disable = shmobile_smp_cpu_disable, + .cpu_can_disable = shmobile_smp_cpu_can_disable, .cpu_die = shmobile_smp_scu_cpu_die, .cpu_kill = shmobile_smp_scu_cpu_kill, #endif
Writes to /sys/.../cpuX/online fail if we determine the platform doesn't support hotplug for that CPU. Furthermore, if the cpu_die op isn't specified the system hangs when we try to offline a CPU and it comes right back online unexpectedly. Let's figure this stuff out before we make the sysfs nodes so that the online file doesn't even exist if it isn't (at least sometimes) possible to hotplug the CPU. We re-purpose the cpu_disable smp op here and rename it to cpu_can_disable because all users use the op to indicate if a CPU can be hotplugged or not in a static fashion. With PSCI we may need to reintroduce the cpu_disable op so that the secure OS can be migrated off the CPU we're trying to hotplug. We'll need to indicate that all CPUs are hotpluggable in that case but this shouldn't be any worse than something like x86 where we indicate that all CPUs are hotpluggable but occasionally we can't offline a CPU due to check_irq_vectors_for_cpu_disable(). Cc: Mark Rutland <mark.rutland@arm.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: <linux-sh@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- arch/arm/common/mcpm_platsmp.c | 12 ++++-------- arch/arm/include/asm/smp.h | 11 ++++++++++- arch/arm/kernel/setup.c | 2 +- arch/arm/kernel/smp.c | 18 +++++++++--------- arch/arm/mach-shmobile/common.h | 2 +- arch/arm/mach-shmobile/platsmp.c | 4 ++-- arch/arm/mach-shmobile/smp-r8a7779.c | 7 ------- arch/arm/mach-shmobile/smp-r8a7790.c | 2 +- arch/arm/mach-shmobile/smp-r8a7791.c | 2 +- arch/arm/mach-shmobile/smp-sh73a0.c | 2 +- 10 files changed, 30 insertions(+), 32 deletions(-)