Message ID | 1424497333-1393-3-git-send-email-sonika.jindal@intel.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Sat, Feb 21, 2015 at 11:12:11AM +0530, Sonika Jindal wrote: > v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh). > v3: Reading dpcd's supported link rates tables based upon edp version in the > same patch. > v4: Move version check under is_edp (Satheesh) > v5: Using le16 for rates, some naming, and removing nested if block (Ville) > v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES > (Ville) > v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it > > Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> > --- > drivers/gpu/drm/i915/intel_dp.c | 38 ++++++++++++++++++++++++++++++++++++++ > drivers/gpu/drm/i915/intel_drv.h | 1 + > 2 files changed, 39 insertions(+) > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c > index 42ac99f..72deac6 100644 > --- a/drivers/gpu/drm/i915/intel_dp.c > +++ b/drivers/gpu/drm/i915/intel_dp.c > @@ -1116,6 +1116,33 @@ hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw) > } > } > > +static int > +intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates) > +{ > + struct drm_device *dev = intel_dp_to_dev(intel_dp); > + int i = 0; > + uint16_t val; > + > + if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) { > + /* > + * Receiver supports only main-link rate selection by > + * link rate table method, so read link rates from > + * supported_link_rates > + */ > + for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i) { > + val = le16_to_cpu(intel_dp->supported_rates[i]); > + if (val == 0) > + break; > + > + sink_rates[i] = val * 200; > + } > + > + if (i <= 0) > + DRM_ERROR("No rates in SUPPORTED_LINK_RATES"); > + } > + return i; > +} > + > static void > intel_dp_set_clock(struct intel_encoder *encoder, > struct intel_crtc_state *pipe_config, int link_bw) > @@ -3592,6 +3619,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) > struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); > struct drm_device *dev = dig_port->base.base.dev; > struct drm_i915_private *dev_priv = dev->dev_private; > + uint8_t rev; > > if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd, > sizeof(intel_dp->dpcd)) < 0) > @@ -3623,6 +3651,16 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) > } else > intel_dp->use_tps3 = false; > > + /* Intermediate frequency support */ > + if (is_edp(intel_dp) && > + (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && > + intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) && intel_dp_dpcd_read_wake() == 1 would be the right thing to check I think. With that fixed: Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> > + (rev >= 0x03)) { /* eDp v1.4 or higher */ > + intel_dp_dpcd_read_wake(&intel_dp->aux, > + DP_SUPPORTED_LINK_RATES, > + intel_dp->supported_rates, > + sizeof(intel_dp->supported_rates)); > + } > if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & > DP_DWN_STRM_PORT_PRESENT)) > return true; /* native DP sink */ > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h > index 6832eb8..24e5411 100644 > --- a/drivers/gpu/drm/i915/intel_drv.h > +++ b/drivers/gpu/drm/i915/intel_drv.h > @@ -602,6 +602,7 @@ struct intel_dp { > uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; > uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; > uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS]; > + __le16 supported_rates[DP_MAX_SUPPORTED_RATES]; > struct drm_dp_aux aux; > uint8_t train_set[4]; > int panel_power_up_delay; > -- > 1.7.10.4
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 42ac99f..72deac6 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1116,6 +1116,33 @@ hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw) } } +static int +intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates) +{ + struct drm_device *dev = intel_dp_to_dev(intel_dp); + int i = 0; + uint16_t val; + + if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) { + /* + * Receiver supports only main-link rate selection by + * link rate table method, so read link rates from + * supported_link_rates + */ + for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i) { + val = le16_to_cpu(intel_dp->supported_rates[i]); + if (val == 0) + break; + + sink_rates[i] = val * 200; + } + + if (i <= 0) + DRM_ERROR("No rates in SUPPORTED_LINK_RATES"); + } + return i; +} + static void intel_dp_set_clock(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, int link_bw) @@ -3592,6 +3619,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); struct drm_device *dev = dig_port->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + uint8_t rev; if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd, sizeof(intel_dp->dpcd)) < 0) @@ -3623,6 +3651,16 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp) } else intel_dp->use_tps3 = false; + /* Intermediate frequency support */ + if (is_edp(intel_dp) && + (intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && + intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) && + (rev >= 0x03)) { /* eDp v1.4 or higher */ + intel_dp_dpcd_read_wake(&intel_dp->aux, + DP_SUPPORTED_LINK_RATES, + intel_dp->supported_rates, + sizeof(intel_dp->supported_rates)); + } if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT)) return true; /* native DP sink */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 6832eb8..24e5411 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -602,6 +602,7 @@ struct intel_dp { uint8_t dpcd[DP_RECEIVER_CAP_SIZE]; uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS]; + __le16 supported_rates[DP_MAX_SUPPORTED_RATES]; struct drm_dp_aux aux; uint8_t train_set[4]; int panel_power_up_delay;
v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh). v3: Reading dpcd's supported link rates tables based upon edp version in the same patch. v4: Move version check under is_edp (Satheesh) v5: Using le16 for rates, some naming, and removing nested if block (Ville) v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES (Ville) v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> --- drivers/gpu/drm/i915/intel_dp.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 1 + 2 files changed, 39 insertions(+)