| Message ID | 1425531661-20040-3-git-send-email-josh.wu@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Josh, Thank you for the patch. On Thursday 05 March 2015 13:01:00 Josh Wu wrote: > The runtime pm resume/suspend will enable/disable pclk (ISI peripheral > clock). > And we need to call rumtime_pm_get/put_sync function to make pm > resume/suspend. > > Signed-off-by: Josh Wu <josh.wu@atmel.com> > --- > > drivers/media/platform/soc_camera/atmel-isi.c | 36 +++++++++++++++++++++--- > 1 file changed, 32 insertions(+), 4 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c index eb179e7..4a384f1 > 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -20,6 +20,7 @@ > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/platform_device.h> > +#include <linux/pm_runtime.h> > #include <linux/slab.h> > > #include <media/atmel-isi.h> > @@ -386,9 +387,7 @@ static int start_streaming(struct vb2_queue *vq, > unsigned int count) struct atmel_isi *isi = ici->priv; > int ret; > > - ret = clk_prepare_enable(isi->pclk); > - if (ret) > - return ret; > + pm_runtime_get_sync(ici->v4l2_dev.dev); > > /* Reset ISI */ > ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); > @@ -450,7 +449,7 @@ static void stop_streaming(struct vb2_queue *vq) > if (ret < 0) > dev_err(icd->parent, "Disable ISI timed out\n"); > > - clk_disable_unprepare(isi->pclk); > + pm_runtime_put_sync(ici->v4l2_dev.dev); Is there a reason to use pm_runtime_put_sync() and not just pm_runtime_put() ? > } > > static struct vb2_ops isi_video_qops = { > @@ -1042,6 +1041,9 @@ static int atmel_isi_probe(struct platform_device > *pdev) soc_host->v4l2_dev.dev = &pdev->dev; > soc_host->nr = pdev->id; > > + pm_suspend_ignore_children(&pdev->dev, true); > + pm_runtime_enable(&pdev->dev); > + > if (isi->pdata.asd_sizes) { > soc_host->asd = isi->pdata.asd; > soc_host->asd_sizes = isi->pdata.asd_sizes; > @@ -1055,6 +1057,7 @@ static int atmel_isi_probe(struct platform_device > *pdev) return 0; > > err_register_soc_camera_host: > + pm_runtime_disable(&pdev->dev); > err_req_irq: > err_ioremap: > vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); > @@ -1067,6 +1070,30 @@ err_alloc_ctx: > return ret; > } > > +static int atmel_isi_runtime_suspend(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + clk_disable_unprepare(isi->pclk); > + > + return 0; > +} > +static int atmel_isi_runtime_resume(struct device *dev) > +{ > + struct soc_camera_host *soc_host = to_soc_camera_host(dev); > + struct atmel_isi *isi = container_of(soc_host, > + struct atmel_isi, soc_host); > + > + return clk_prepare_enable(isi->pclk); > +} > + > +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { > + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, > + atmel_isi_runtime_resume, NULL) > +}; > + > static const struct of_device_id atmel_isi_of_match[] = { > { .compatible = "atmel,at91sam9g45-isi" }, > { } > @@ -1079,6 +1106,7 @@ static struct platform_driver atmel_isi_driver = { > .name = "atmel_isi", > .owner = THIS_MODULE, > .of_match_table = of_match_ptr(atmel_isi_of_match), > + .pm = &atmel_isi_dev_pm_ops, > }, > };
On 3/5/2015 6:36 PM, Laurent Pinchart wrote: > Hi Josh, > > Thank you for the patch. > > On Thursday 05 March 2015 13:01:00 Josh Wu wrote: >> The runtime pm resume/suspend will enable/disable pclk (ISI peripheral >> clock). >> And we need to call rumtime_pm_get/put_sync function to make pm >> resume/suspend. >> >> Signed-off-by: Josh Wu <josh.wu@atmel.com> >> --- >> >> drivers/media/platform/soc_camera/atmel-isi.c | 36 +++++++++++++++++++++--- >> 1 file changed, 32 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >> b/drivers/media/platform/soc_camera/atmel-isi.c index eb179e7..4a384f1 >> 100644 >> --- a/drivers/media/platform/soc_camera/atmel-isi.c >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >> @@ -20,6 +20,7 @@ >> #include <linux/kernel.h> >> #include <linux/module.h> >> #include <linux/platform_device.h> >> +#include <linux/pm_runtime.h> >> #include <linux/slab.h> >> >> #include <media/atmel-isi.h> >> @@ -386,9 +387,7 @@ static int start_streaming(struct vb2_queue *vq, >> unsigned int count) struct atmel_isi *isi = ici->priv; >> int ret; >> >> - ret = clk_prepare_enable(isi->pclk); >> - if (ret) >> - return ret; >> + pm_runtime_get_sync(ici->v4l2_dev.dev); >> >> /* Reset ISI */ >> ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); >> @@ -450,7 +449,7 @@ static void stop_streaming(struct vb2_queue *vq) >> if (ret < 0) >> dev_err(icd->parent, "Disable ISI timed out\n"); >> >> - clk_disable_unprepare(isi->pclk); >> + pm_runtime_put_sync(ici->v4l2_dev.dev); > Is there a reason to use pm_runtime_put_sync() and not just pm_runtime_put() ? right, for sure we can use pm_runtime_put() here. Best Regards, Josh Wu > >> } >> >> static struct vb2_ops isi_video_qops = { >> @@ -1042,6 +1041,9 @@ static int atmel_isi_probe(struct platform_device >> *pdev) soc_host->v4l2_dev.dev = &pdev->dev; >> soc_host->nr = pdev->id; >> >> + pm_suspend_ignore_children(&pdev->dev, true); >> + pm_runtime_enable(&pdev->dev); >> + >> if (isi->pdata.asd_sizes) { >> soc_host->asd = isi->pdata.asd; >> soc_host->asd_sizes = isi->pdata.asd_sizes; >> @@ -1055,6 +1057,7 @@ static int atmel_isi_probe(struct platform_device >> *pdev) return 0; >> >> err_register_soc_camera_host: >> + pm_runtime_disable(&pdev->dev); >> err_req_irq: >> err_ioremap: >> vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); >> @@ -1067,6 +1070,30 @@ err_alloc_ctx: >> return ret; >> } >> >> +static int atmel_isi_runtime_suspend(struct device *dev) >> +{ >> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >> + struct atmel_isi *isi = container_of(soc_host, >> + struct atmel_isi, soc_host); >> + >> + clk_disable_unprepare(isi->pclk); >> + >> + return 0; >> +} >> +static int atmel_isi_runtime_resume(struct device *dev) >> +{ >> + struct soc_camera_host *soc_host = to_soc_camera_host(dev); >> + struct atmel_isi *isi = container_of(soc_host, >> + struct atmel_isi, soc_host); >> + >> + return clk_prepare_enable(isi->pclk); >> +} >> + >> +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { >> + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, >> + atmel_isi_runtime_resume, NULL) >> +}; >> + >> static const struct of_device_id atmel_isi_of_match[] = { >> { .compatible = "atmel,at91sam9g45-isi" }, >> { } >> @@ -1079,6 +1106,7 @@ static struct platform_driver atmel_isi_driver = { >> .name = "atmel_isi", >> .owner = THIS_MODULE, >> .of_match_table = of_match_ptr(atmel_isi_of_match), >> + .pm = &atmel_isi_dev_pm_ops, >> }, >> }; -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index eb179e7..4a384f1 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -20,6 +20,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <media/atmel-isi.h> @@ -386,9 +387,7 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici->priv; int ret; - ret = clk_prepare_enable(isi->pclk); - if (ret) - return ret; + pm_runtime_get_sync(ici->v4l2_dev.dev); /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); @@ -450,7 +449,7 @@ static void stop_streaming(struct vb2_queue *vq) if (ret < 0) dev_err(icd->parent, "Disable ISI timed out\n"); - clk_disable_unprepare(isi->pclk); + pm_runtime_put_sync(ici->v4l2_dev.dev); } static struct vb2_ops isi_video_qops = { @@ -1042,6 +1041,9 @@ static int atmel_isi_probe(struct platform_device *pdev) soc_host->v4l2_dev.dev = &pdev->dev; soc_host->nr = pdev->id; + pm_suspend_ignore_children(&pdev->dev, true); + pm_runtime_enable(&pdev->dev); + if (isi->pdata.asd_sizes) { soc_host->asd = isi->pdata.asd; soc_host->asd_sizes = isi->pdata.asd_sizes; @@ -1055,6 +1057,7 @@ static int atmel_isi_probe(struct platform_device *pdev) return 0; err_register_soc_camera_host: + pm_runtime_disable(&pdev->dev); err_req_irq: err_ioremap: vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); @@ -1067,6 +1070,30 @@ err_alloc_ctx: return ret; } +static int atmel_isi_runtime_suspend(struct device *dev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(dev); + struct atmel_isi *isi = container_of(soc_host, + struct atmel_isi, soc_host); + + clk_disable_unprepare(isi->pclk); + + return 0; +} +static int atmel_isi_runtime_resume(struct device *dev) +{ + struct soc_camera_host *soc_host = to_soc_camera_host(dev); + struct atmel_isi *isi = container_of(soc_host, + struct atmel_isi, soc_host); + + return clk_prepare_enable(isi->pclk); +} + +static const struct dev_pm_ops atmel_isi_dev_pm_ops = { + SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend, + atmel_isi_runtime_resume, NULL) +}; + static const struct of_device_id atmel_isi_of_match[] = { { .compatible = "atmel,at91sam9g45-isi" }, { } @@ -1079,6 +1106,7 @@ static struct platform_driver atmel_isi_driver = { .name = "atmel_isi", .owner = THIS_MODULE, .of_match_table = of_match_ptr(atmel_isi_of_match), + .pm = &atmel_isi_dev_pm_ops, }, };
The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). And we need to call rumtime_pm_get/put_sync function to make pm resume/suspend. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- drivers/media/platform/soc_camera/atmel-isi.c | 36 ++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 4 deletions(-)