| Message ID | 1425531661-20040-2-git-send-email-josh.wu@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Josh, Thank you for the patch. On Thursday 05 March 2015 13:00:59 Josh Wu wrote: > As the clock_start/stop() use to control the mclk for the sensor not the > ISI peripheral clock. > So we move them to start/stop_stream() function. Then the driver will access registers with the peripheral clock disabled, for instance in isi_camera_set_fmt() (calling configure_geometry), isi_camera_set_bus_param() or atmel_isi_probe(). Isn't that a problem ? Or are all registers guaranteed to be accessible (and retained) when the clock is disabled ? > Signed-off-by: Josh Wu <josh.wu@atmel.com> > --- > > drivers/media/platform/soc_camera/atmel-isi.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c > b/drivers/media/platform/soc_camera/atmel-isi.c index 1208818..eb179e7 > 100644 > --- a/drivers/media/platform/soc_camera/atmel-isi.c > +++ b/drivers/media/platform/soc_camera/atmel-isi.c > @@ -386,6 +386,10 @@ static int start_streaming(struct vb2_queue *vq, > unsigned int count) struct atmel_isi *isi = ici->priv; > int ret; > > + ret = clk_prepare_enable(isi->pclk); > + if (ret) > + return ret; > + > /* Reset ISI */ > ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); > if (ret < 0) { > @@ -445,6 +449,8 @@ static void stop_streaming(struct vb2_queue *vq) > ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); > if (ret < 0) > dev_err(icd->parent, "Disable ISI timed out\n"); > + > + clk_disable_unprepare(isi->pclk); > } > > static struct vb2_ops isi_video_qops = { > @@ -723,14 +729,9 @@ static int isi_camera_clock_start(struct > soc_camera_host *ici) struct atmel_isi *isi = ici->priv; > int ret; > > - ret = clk_prepare_enable(isi->pclk); > - if (ret) > - return ret; > - > if (!IS_ERR(isi->mck)) { > ret = clk_prepare_enable(isi->mck); > if (ret) { > - clk_disable_unprepare(isi->pclk); > return ret; > } > } > @@ -745,7 +746,6 @@ static void isi_camera_clock_stop(struct soc_camera_host > *ici) > > if (!IS_ERR(isi->mck)) > clk_disable_unprepare(isi->mck); > - clk_disable_unprepare(isi->pclk); > } > > static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
On 3/5/2015 6:39 PM, Laurent Pinchart wrote: > Hi Josh, > > Thank you for the patch. > > On Thursday 05 March 2015 13:00:59 Josh Wu wrote: >> As the clock_start/stop() use to control the mclk for the sensor not the >> ISI peripheral clock. >> So we move them to start/stop_stream() function. > Then the driver will access registers with the peripheral clock disabled, for > instance in isi_camera_set_fmt() (calling configure_geometry), > isi_camera_set_bus_param() or atmel_isi_probe(). Isn't that a problem ? Or are > all registers guaranteed to be accessible (and retained) when the clock is > disabled ? So far, I don't see any problem yet. But I'd like to be sure of that. I'll give you the feedback after more test. Thanks for make me head up. Best Regards, Josh Wu > >> Signed-off-by: Josh Wu <josh.wu@atmel.com> >> --- >> >> drivers/media/platform/soc_camera/atmel-isi.c | 12 ++++++------ >> 1 file changed, 6 insertions(+), 6 deletions(-) >> >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c >> b/drivers/media/platform/soc_camera/atmel-isi.c index 1208818..eb179e7 >> 100644 >> --- a/drivers/media/platform/soc_camera/atmel-isi.c >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >> @@ -386,6 +386,10 @@ static int start_streaming(struct vb2_queue *vq, >> unsigned int count) struct atmel_isi *isi = ici->priv; >> int ret; >> >> + ret = clk_prepare_enable(isi->pclk); >> + if (ret) >> + return ret; >> + >> /* Reset ISI */ >> ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); >> if (ret < 0) { >> @@ -445,6 +449,8 @@ static void stop_streaming(struct vb2_queue *vq) >> ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); >> if (ret < 0) >> dev_err(icd->parent, "Disable ISI timed out\n"); >> + >> + clk_disable_unprepare(isi->pclk); >> } >> >> static struct vb2_ops isi_video_qops = { >> @@ -723,14 +729,9 @@ static int isi_camera_clock_start(struct >> soc_camera_host *ici) struct atmel_isi *isi = ici->priv; >> int ret; >> >> - ret = clk_prepare_enable(isi->pclk); >> - if (ret) >> - return ret; >> - >> if (!IS_ERR(isi->mck)) { >> ret = clk_prepare_enable(isi->mck); >> if (ret) { >> - clk_disable_unprepare(isi->pclk); >> return ret; >> } >> } >> @@ -745,7 +746,6 @@ static void isi_camera_clock_stop(struct soc_camera_host >> *ici) >> >> if (!IS_ERR(isi->mck)) >> clk_disable_unprepare(isi->mck); >> - clk_disable_unprepare(isi->pclk); >> } >> >> static unsigned int isi_camera_poll(struct file *file, poll_table *pt) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c index 1208818..eb179e7 100644 --- a/drivers/media/platform/soc_camera/atmel-isi.c +++ b/drivers/media/platform/soc_camera/atmel-isi.c @@ -386,6 +386,10 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count) struct atmel_isi *isi = ici->priv; int ret; + ret = clk_prepare_enable(isi->pclk); + if (ret) + return ret; + /* Reset ISI */ ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); if (ret < 0) { @@ -445,6 +449,8 @@ static void stop_streaming(struct vb2_queue *vq) ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); if (ret < 0) dev_err(icd->parent, "Disable ISI timed out\n"); + + clk_disable_unprepare(isi->pclk); } static struct vb2_ops isi_video_qops = { @@ -723,14 +729,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici) struct atmel_isi *isi = ici->priv; int ret; - ret = clk_prepare_enable(isi->pclk); - if (ret) - return ret; - if (!IS_ERR(isi->mck)) { ret = clk_prepare_enable(isi->mck); if (ret) { - clk_disable_unprepare(isi->pclk); return ret; } } @@ -745,7 +746,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici) if (!IS_ERR(isi->mck)) clk_disable_unprepare(isi->mck); - clk_disable_unprepare(isi->pclk); } static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
As the clock_start/stop() use to control the mclk for the sensor not the ISI peripheral clock. So we move them to start/stop_stream() function. Signed-off-by: Josh Wu <josh.wu@atmel.com> --- drivers/media/platform/soc_camera/atmel-isi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)